diff options
Diffstat (limited to 'src/dpdk_lib18/librte_pmd_ixgbe/ixgbe_bypass_api.h')
| -rwxr-xr-x | src/dpdk_lib18/librte_pmd_ixgbe/ixgbe_bypass_api.h | 299 |
1 files changed, 299 insertions, 0 deletions
diff --git a/src/dpdk_lib18/librte_pmd_ixgbe/ixgbe_bypass_api.h b/src/dpdk_lib18/librte_pmd_ixgbe/ixgbe_bypass_api.h new file mode 100755 index 00000000..b4a73864 --- /dev/null +++ b/src/dpdk_lib18/librte_pmd_ixgbe/ixgbe_bypass_api.h @@ -0,0 +1,299 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _IXGBE_BYPASS_API_H_ +#define _IXGBE_BYPASS_API_H_ + +#ifdef RTE_NIC_BYPASS + +#include "ixgbe_bypass_defines.h" +/** + * ixgbe_bypass_rw_generic - Bit bang data into by_pass FW + * + * @hw: pointer to hardware structure + * @cmd: Command we send to the FW + * @status: The reply from the FW + * + * Bit-bangs the cmd to the by_pass FW status points to what is returned. + **/ +#define IXGBE_BYPASS_BB_WAIT 1 +static s32 ixgbe_bypass_rw_generic(struct ixgbe_hw *hw, u32 cmd, u32 *status) +{ + int i; + u32 sck, sdi, sdo, dir_sck, dir_sdi, dir_sdo; + u32 esdp; + + if (!status) + return IXGBE_ERR_PARAM; + + *status = 0; + + /* SDP vary by MAC type */ + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + sck = IXGBE_ESDP_SDP7; + sdi = IXGBE_ESDP_SDP0; + sdo = IXGBE_ESDP_SDP6; + dir_sck = IXGBE_ESDP_SDP7_DIR; + dir_sdi = IXGBE_ESDP_SDP0_DIR; + dir_sdo = IXGBE_ESDP_SDP6_DIR; + break; + case ixgbe_mac_X540: + sck = IXGBE_ESDP_SDP2; + sdi = IXGBE_ESDP_SDP0; + sdo = IXGBE_ESDP_SDP1; + dir_sck = IXGBE_ESDP_SDP2_DIR; + dir_sdi = IXGBE_ESDP_SDP0_DIR; + dir_sdo = IXGBE_ESDP_SDP1_DIR; + break; + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + sck = IXGBE_ESDP_SDP2; + sdi = IXGBE_ESDP_SDP0; + sdo = IXGBE_ESDP_SDP1; + dir_sck = IXGBE_ESDP_SDP2_DIR; + dir_sdi = IXGBE_ESDP_SDP0_DIR; + dir_sdo = IXGBE_ESDP_SDP1_DIR; + break; + default: + return IXGBE_ERR_DEVICE_NOT_SUPPORTED; + } + + /* Set SDP pins direction */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= dir_sck; /* SCK as output */ + esdp |= dir_sdi; /* SDI as output */ + esdp &= ~dir_sdo; /* SDO as input */ + esdp |= sck; + esdp |= sdi; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + // TODO: + msleep(IXGBE_BYPASS_BB_WAIT); + + /* Generate start condition */ + esdp &= ~sdi; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + msleep(IXGBE_BYPASS_BB_WAIT); + + esdp &= ~sck; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + msleep(IXGBE_BYPASS_BB_WAIT); + + /* Clock out the new control word and clock in the status */ + for (i = 0; i < 32; i++) { + if ((cmd >> (31 - i)) & 0x01) { + esdp |= sdi; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + } else { + esdp &= ~sdi; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + } + IXGBE_WRITE_FLUSH(hw); + msleep(IXGBE_BYPASS_BB_WAIT); + + esdp |= sck; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + msleep(IXGBE_BYPASS_BB_WAIT); + + esdp &= ~sck; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + msleep(IXGBE_BYPASS_BB_WAIT); + + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & sdo) + *status = (*status << 1) | 0x01; + else + *status = (*status << 1) | 0x00; + msleep(IXGBE_BYPASS_BB_WAIT); + } + + /* stop condition */ + esdp |= sck; + esdp &= ~sdi; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + msleep(IXGBE_BYPASS_BB_WAIT); + + esdp |= sdi; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + /* set the page bits to match the cmd that the status it belongs to */ + *status = (*status & 0x3fffffff) | (cmd & 0xc0000000); + + return 0; +} + +/** + * ixgbe_bypass_valid_rd_generic - Verify valid return from bit-bang. + * + * If we send a write we can't be sure it took until we can read back + * that same register. It can be a problem as some of the feilds may + * for valid reasons change between the time wrote the register and + * we read it again to verify. So this function check everything we + * can check and then assumes it worked. + * + * @u32 in_reg - The register cmd for the bit-bang read. + * @u32 out_reg - The register returned from a bit-bang read. + **/ +static bool ixgbe_bypass_valid_rd_generic(u32 in_reg, u32 out_reg) +{ + u32 mask; + + /* Page must match for all control pages */ + if ((in_reg & BYPASS_PAGE_M) != (out_reg & BYPASS_PAGE_M)) + return false; + + switch (in_reg & BYPASS_PAGE_M) { + case BYPASS_PAGE_CTL0: + /* All the following can't change since the last write + * - All the event actions + * - The timeout value + */ + mask = BYPASS_AUX_ON_M | BYPASS_MAIN_ON_M | + BYPASS_MAIN_OFF_M | BYPASS_AUX_OFF_M | + BYPASS_WDTIMEOUT_M | + BYPASS_WDT_VALUE_M; + if ((out_reg & mask) != (in_reg & mask)) + return false; + + /* 0x0 is never a valid value for bypass status */ + if (!(out_reg & BYPASS_STATUS_OFF_M)) + return false; + break; + case BYPASS_PAGE_CTL1: + /* All the following can't change since the last write + * - time valid bit + * - time we last sent + */ + mask = BYPASS_CTL1_VALID_M | BYPASS_CTL1_TIME_M; + if ((out_reg & mask) != (in_reg & mask)) + return false; + break; + case BYPASS_PAGE_CTL2: + /* All we can check in this page is control number + * which is already done above. + */ + break; + } + + /* We are as sure as we can be return true */ + return true; +} + +/** + * ixgbe_bypass_set_generic - Set a bypass field in the FW CTRL Regiter. + * + * @hw: pointer to hardware structure + * @cmd: The control word we are setting. + * @event: The event we are setting in the FW. This also happens to + * be the mask for the event we are setting (handy) + * @action: The action we set the event to in the FW. This is in a + * bit field that happens to be what we want to put in + * the event spot (also handy) + **/ +static s32 ixgbe_bypass_set_generic(struct ixgbe_hw *hw, u32 ctrl, u32 event, + u32 action) +{ + u32 by_ctl = 0; + u32 cmd, verify; + u32 count = 0; + + /* Get current values */ + cmd = ctrl; /* just reading only need control number */ + if (ixgbe_bypass_rw_generic(hw, cmd, &by_ctl)) + return IXGBE_ERR_INVALID_ARGUMENT; + + /* Set to new action */ + cmd = (by_ctl & ~event) | BYPASS_WE | action; + if (ixgbe_bypass_rw_generic(hw, cmd, &by_ctl)) + return IXGBE_ERR_INVALID_ARGUMENT; + + /* Page 0 force a FW eeprom write which is slow so verify */ + if ((cmd & BYPASS_PAGE_M) == BYPASS_PAGE_CTL0) { + verify = BYPASS_PAGE_CTL0; + do { + if (count++ > 5) + return IXGBE_BYPASS_FW_WRITE_FAILURE; + + if (ixgbe_bypass_rw_generic(hw, verify, &by_ctl)) + return IXGBE_ERR_INVALID_ARGUMENT; + } while (!ixgbe_bypass_valid_rd_generic(cmd, by_ctl)); + } else { + /* We have give the FW time for the write to stick */ + msleep(100); + } + + return 0; +} + +/** + * ixgbe_bypass_rd_eep_generic - Read the bypass FW eeprom address. + * + * @hw: pointer to hardware structure + * @addr: The bypass eeprom address to read. + * @value: The 8b of data at the address above. + **/ +static s32 ixgbe_bypass_rd_eep_generic(struct ixgbe_hw *hw, u32 addr, u8 *value) +{ + u32 cmd; + u32 status; + + + /* send the request */ + cmd = BYPASS_PAGE_CTL2 | BYPASS_WE; + cmd |= (addr << BYPASS_CTL2_OFFSET_SHIFT) & BYPASS_CTL2_OFFSET_M; + if (ixgbe_bypass_rw_generic(hw, cmd, &status)) + return IXGBE_ERR_INVALID_ARGUMENT; + + /* We have give the FW time for the write to stick */ + msleep(100); + + /* now read the results */ + cmd &= ~BYPASS_WE; + if (ixgbe_bypass_rw_generic(hw, cmd, &status)) + return IXGBE_ERR_INVALID_ARGUMENT; + + *value = status & BYPASS_CTL2_DATA_M; + + return 0; +} + +#endif /* RTE_NIC_BYPASS */ + +#endif /* _IXGBE_BYPASS_API_H_ */ |