diff options
Diffstat (limited to 'trex_rpc_server_spec.asciidoc')
| -rw-r--r-- | trex_rpc_server_spec.asciidoc | 162 |
1 files changed, 152 insertions, 10 deletions
diff --git a/trex_rpc_server_spec.asciidoc b/trex_rpc_server_spec.asciidoc index f4b06bb7..6199ff24 100644 --- a/trex_rpc_server_spec.asciidoc +++ b/trex_rpc_server_spec.asciidoc @@ -1,6 +1,6 @@ The TRex RPC Server =================== -:author: imarom +:author: Itay Marom :email: <imarom@cisco.com> :revnumber: 1.70-0.0 :quotes.++: @@ -286,10 +286,13 @@ e.g.: user owning the device, number of ports configured === Add Stream * *Name* - 'add_stream' * *Description* - Adds a stream to a port -* *Paramters* - Object of type 'stream' - see below +* *Paramters* +** *port_id* - port id associated with this stream +** *stream_id* - stream id associated with the stream object +** *stream* - object of type xref:stream_obj['stream'] * *Result* - ACK in case of success -==== Object type 'stream' +==== Object type 'stream' anchor:stream_obj[] Add_stream gets a single parameter of type object. @@ -299,11 +302,9 @@ The format of that object is as follows: [options="header",cols="1,1,3"] |================= | Field | Type | Description -| port_id | int | The port that this stream will be assoiciated with. Valid number is in the range got from get_status : 'ports.count' -| stream_id | int | unique (per port) identifier for this stream -| enabled | boolean | is this stream enabled ? -| self_start | boolean | is this stream triggered by starting injection or triggered by another stream ? -| isg | double | inter stream gap - delay time until the stream is started +| enabled | boolean | is this stream enabled +| self_start | boolean | is this stream triggered by starting injection or triggered by another stream +| isg | double | ['usec'] inter stream gap - delay time in usec until the stream is started | next_stream | int | next stream to start after this stream. -1 means stop after this stream | packet | object | object of type xref:packet_obj['packet'] | mode | object | object of type xref:mode_obj['mode'] @@ -323,7 +324,7 @@ packet contains binary and meta data |================= ===== Object type 'mode' anchor:mode_obj[] -mode object can be one of the following objects: +mode object can be 'one' of the following objects: .Object type 'mode - continuous' [options="header",cols="1,1,3"] @@ -349,7 +350,148 @@ mode object can be one of the following objects: | type | string | ''multi_burst'' | pps | int | rate in packets per second | pkts_per_burst | int | packets in a single burst -| ibg | double | inter burst gap. delay between bursts +| ibg | double | ['usec'] inter burst gap. delay between bursts in usec | count | int | number of bursts. ''0'' means loop forever, ''1'' will fall back to single burst |================= +===== Object type 'vm' anchor:vm_obj[] +Describes the VM instructions to be used with this stream + +.Object type 'vm' +[options="header",cols="1,1,3"] +|================= +| Field | Type | Description +|================= + +===== Object type 'rx_stats' anchor:rx_stats_obj[] +Describes rx stats for the stream + +.Object type 'rx_stats' +[options="header",cols="1,1,3"] +|================= +| Field | Type | Description +| enabled | boolean | is rx_stats enabled for this stream +| rx_stream_id | int | +| seq_enabled | boolean | should write 32 bit sequence +| latency_enabled | boolean | should write 32 bit latency +|================= + +[source,bash] +---- + +'Request': + +{ + "id": 1, + "jsonrpc": "2.0", + "method": "add_stream", + "params": { + "port_id": 1, + "stream_id": 502 + "stream": { + "enabled": true, + "isg": 4.3, + "mode": { + "pps": 3, + "total_pkts": 5000, + "type": "single_burst" + }, + "next_stream_id": -1, + "packet": { + "binary": [ + 4, + 1, + 255 + ], + "meta": "" + }, + "rx_stats": { + "enabled": false + }, + "self_start": true, + } + } +} + +'Response': + +{ + "id": 1, + "jsonrpc": "2.0", + "result": "ACK" +} + + +---- + + +=== Remove Stream +* *Name* - 'remove_stream' +* *Description* - Removes a stream from a port +* *Paramters* +** *port_id* - port assosicated with the stream. +** *stream_id* - stream to remove + +* *Result* - ACK in case of success + +[source,bash] +---- + +'Request': + +{ + "id": 1 + "jsonrpc": "2.0", + "method": "remove_stream", + "params": { + "port_id": 1, + "stream_id": 502 + } +} + + +'Response': + +{ + "id": 1 + "jsonrpc": "2.0", + "result": "ACK" +} + +---- + +=== Get Stream ID List +* *Name* - 'get_stream_list' +* *Description* - fetch all the assoicated streams for a port +* *Paramters* +** *port_id* - port to query for registered streams + +* *Result* - array of 'stream_id' + +[source,bash] +---- + +'Request': + +{ + "id": 1, + "jsonrpc": "2.0", + "method": "get_stream_list", + "params": { + "port_id": 1 + } +} + +'Response': + +{ + "id": 1, + "jsonrpc": "2.0", + "result": [ + 502, + 18 + ] +} + + +---- |