path: root/src/dpdk_lib18/librte_sched/rte_sched.h

/*-
 *   BSD LICENSE
 *
 *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following conditions
 *   are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in
 *       the documentation and/or other materials provided with the
 *       distribution.
 *     * Neither the name of Intel Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef __INCLUDE_RTE_SCHED_H__
#define __INCLUDE_RTE_SCHED_H__

#ifdef __cplusplus
extern "C" {
#endif

/**
 * @file
 * RTE Hierarchical Scheduler
 *
 * The hierarchical scheduler prioritizes the transmission of packets from different
 * users and traffic classes according to the Service Level Agreements (SLAs) defined
 * for the current network node.
 *
 * The scheduler supports thousands of packet queues grouped under a 5-level hierarchy:
 *     1. Port:
 *           - Typical usage: output Ethernet port;
 *           - Multiple ports are scheduled in round robin order with equal priority;
 *     2. Subport:
 *           - Typical usage: group of users;
 *           - Traffic shaping using the token bucket algorithm (one bucket per subport);
 *           - Upper limit enforced per traffic class at subport level;
 *           - Lower priority traffic classes able to reuse subport bandwidth currently
 *             unused by higher priority traffic classes of the same subport;
 *           - When any subport traffic class is oversubscribed (configuration time
 *             event), the usage of subport member pipes with high demand for that
 *             traffic class pipes is truncated to a dynamically adjusted value with no
 *             impact to low demand pipes;
 *     3. Pipe:
 *           - Typical usage: individual user/subscriber;
 *           - Traffic shaping using the token bucket algorithm (one bucket per pipe);
 *     4. Traffic class:
 *           - Traffic classes of the same pipe handled in strict priority order;
 *           - Upper limit enforced per traffic class at the pipe level;
 *           - Lower priority traffic classes able to reuse pipe bandwidth currently
 *             unused by higher priority traffic classes of the same pipe;
 *     5. Queue:
 *           - Typical usage: queue hosting packets from one or multiple connections
 *             of same traffic class belonging to the same user;
 *           - Weighted Round Robin (WRR) is used to service the queues within same
 *             pipe traffic class.
 *
 ***/

#include <sys/types.h>
#include <rte_mbuf.h>
#include <rte_meter.h>

/** Random Early Detection (RED) */
#ifdef RTE_SCHED_RED
#include "rte_red.h"
#endif

/** Number of traffic classes per pipe (as well as subport). Cannot be changed. */
#define RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE    4

/** Number of queues per pipe traffic class. Cannot be changed. */
#define RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS    4

/** Number of queues per pipe. */
#define RTE_SCHED_QUEUES_PER_PIPE             \
	(RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE *     \
	RTE_SCHED_QUEUES_PER_TRAFFIC_CLASS)

/** Maximum number of pipe profiles that can be defined per port. Compile-time configurable.*/
#ifndef RTE_SCHED_PIPE_PROFILES_PER_PORT
#define RTE_SCHED_PIPE_PROFILES_PER_PORT      256
#endif

/** Ethernet framing overhead. Overhead fields per Ethernet frame:
   1. Preamble:                             7 bytes;
   2. Start of Frame Delimiter (SFD):       1 byte;
   3. Frame Check Sequence (FCS):           4 bytes;
   4. Inter Frame Gap (IFG):               12 bytes.
The FCS is considered overhead only if not included in the packet length (field pkt_len
of struct rte_mbuf). */
#ifndef RTE_SCHED_FRAME_OVERHEAD_DEFAULT
#define RTE_SCHED_FRAME_OVERHEAD_DEFAULT      24
#endif

/** Subport configuration parameters. The period and credits_per_period parameters are measured
in bytes, with one byte meaning the time duration associated with the transmission of one byte
on the physical medium of the output port, with pipe or pipe traffic class rate (measured as
percentage of output port rate) determined as credits_per_period divided by period. One credit
represents one byte. */
struct rte_sched_subport_params {
	/* Subport token bucket */
	uint32_t tb_rate;                /**< Subport token bucket rate (measured in bytes per second) */
	uint32_t tb_size;                /**< Subport token bucket size (measured in credits) */

	/* Subport traffic classes */
	uint32_t tc_rate[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Subport traffic class rates (measured in bytes per second) */
	uint32_t tc_period;              /**< Enforcement period for traffic class rates (measured in milliseconds) */
};

/** Subport statistics */
struct rte_sched_subport_stats {
	/* Packets */
	uint32_t n_pkts_tc[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Number of packets successfully written to current
	                                      subport for each traffic class */
	uint32_t n_pkts_tc_dropped[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Number of packets dropped by the current
	                                      subport for each traffic class due to subport queues being full or congested*/

	/* Bytes */
	uint32_t n_bytes_tc[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Number of bytes successfully written to current
	                                      subport for each traffic class*/
	uint32_t n_bytes_tc_dropped[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Number of bytes dropped by the current
                                          subport for each traffic class due to subport queues being full or congested */
};

/** Pipe configuration parameters. The period and credits_per_period parameters are measured
in bytes, with one byte meaning the time duration associated with the transmission of one byte
on the physical medium of the output port, with pipe or pipe traffic class rate (measured as
percentage of output port rate) determined as credits_per_period divided by period. One credit
represents one byte. */
struct rte_sched_pipe_params {
	/* Pipe token bucket */
	uint32_t tb_rate;                /**< Pipe token bucket rate (measured in bytes per second) */
	uint32_t tb_size;                /**< Pipe token bucket size (measured in credits) */

	/* Pipe traffic classes */
	uint32_t tc_rate[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Pipe traffic class rates (measured in bytes per second) */
	uint32_t tc_period;              /**< Enforcement period for pipe traffic class rates (measured in milliseconds) */
#ifdef RTE_SCHED_SUBPORT_TC_OV
	uint8_t tc_ov_weight;            /**< Weight for the current pipe in the event of subport traffic class 3 oversubscription */
#endif

	/* Pipe queues */
	uint8_t  wrr_weights[RTE_SCHED_QUEUES_PER_PIPE]; /**< WRR weights for the queues of the current pipe */
};

/** Queue statistics */
struct rte_sched_queue_stats {
	/* Packets */
	uint32_t n_pkts;                 /**< Number of packets successfully written to current queue */
	uint32_t n_pkts_dropped;         /**< Number of packets dropped due to current queue being full or congested */

	/* Bytes */
	uint32_t n_bytes;                /**< Number of bytes successfully written to current queue */
	uint32_t n_bytes_dropped;        /**< Number of bytes dropped due to current queue being full or congested */
};

/** Port configuration parameters. */
struct rte_sched_port_params {
	const char *name;                /**< Literal string to be associated to the current port scheduler instance */
	int socket;                      /**< CPU socket ID where the memory for port scheduler should be allocated */
	uint32_t rate;                   /**< Output port rate (measured in bytes per second) */
	uint32_t mtu;                    /**< Maximum Ethernet frame size (measured in bytes). Should not include the framing overhead. */
	uint32_t frame_overhead;         /**< Framing overhead per packet (measured in bytes) */
	uint32_t n_subports_per_port;    /**< Number of subports for the current port scheduler instance*/
	uint32_t n_pipes_per_subport;    /**< Number of pipes for each port scheduler subport */
	uint16_t qsize[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE]; /**< Packet queue size for each traffic class. All queues
	                                      within the same pipe traffic class have the same size. Queues from
										  different pipes serving the same traffic class have the same size. */
	struct rte_sched_pipe_params *pipe_profiles; /**< Pipe profile table defined for current port scheduler instance.
                                          Every pipe of the current port scheduler is configured using one of the
										  profiles from this table. */
	uint32_t n_pipe_profiles;        /**< Number of profiles in the pipe profile table */
#ifdef RTE_SCHED_RED
	struct rte_red_params red_params[RTE_SCHED_TRAFFIC_CLASSES_PER_PIPE][e_RTE_METER_COLORS]; /**< RED parameters */
#endif
};

/** Path through the scheduler hierarchy used by the scheduler enqueue operation to
identify the destination queue for the current packet. Stored in the field hash.sched
of struct rte_mbuf of each packet, typically written by the classification stage and read by
scheduler enqueue.*/
struct rte_sched_port_hierarchy {
	uint32_t queue:2;                /**< Queue ID (0 .. 3) */
	uint32_t traffic_class:2;        /**< Traffic class ID (0 .. 3)*/
	uint32_t pipe:20;                /**< Pipe ID */
	uint32_t subport:6;              /**< Subport ID */
	uint32_t color:2;                /**< Color */
};

/*
 * Configuration
 *
 ***/

/**
 * Hierarchical scheduler port configuration
 *
 * @param params
 *   Port scheduler configuration parameter structure
 * @return
 *   Handle to port scheduler instance upon success or NULL otherwise.
 */
struct rte_sched_port *
rte_sched_port_config(struct rte_sched_port_params *params);

/**
 * Hierarchical scheduler port free
 *
 * @param port
 *   Handle to port scheduler instance
 */
void
rte_sched_port_free(struct rte_sched_port *port);

/**
 * Hierarchical scheduler subport configuration
 *
 * @param port
 *   Handle to port scheduler instance
 * @param subport_id
 *   Subport ID
 * @param params
 *   Subport configuration parameters
 * @return
 *   0 upon success, error code otherwise
 */
int
rte_sched_subport_config(struct rte_sched_port *port,
	uint32_t subport_id,
	struct rte_sched_subport_params *params);

/**
 * Hierarchical scheduler pipe configuration
 *
 * @param port
 *   Handle to port scheduler instance
 * @param subport_id
 *   Subport ID
 * @param pipe_id
 *   Pipe ID within subport
 * @param pipe_profile
 *   ID of port-level pre-configured pipe profile
 * @return
 *   0 upon success, error code otherwise
 */
int
rte_sched_pipe_config(struct rte_sched_port *port,
	uint32_t subport_id,
	uint32_t pipe_id,
	int32_t pipe_profile);

/**
 * Hierarchical scheduler memory footprint size per port
 *
 * @param params
 *   Port scheduler configuration parameter structure
 * @return
 *   Memory footprint size in bytes upon success, 0 otherwise
 */
uint32_t
rte_sched_port_get_memory_footprint(struct rte_sched_port_params *params);

/*
 * Statistics
 *
 ***/

/**
 * Hierarchical scheduler subport statistics read
 *
 * @param port
 *   Handle to port scheduler instance
 * @param subport_id
 *   Subport ID
 * @param stats
 *   Pointer to pre-allocated subport statistics structure where the statistics
 *   counters should be stored
 * @param tc_ov
 *   Pointer to pre-allocated 4-entry array where the oversubscription status for
 *   each of the 4 subport traffic classes should be stored.
 * @return
 *   0 upon success, error code otherwise
 */
int
rte_sched_subport_read_stats(struct rte_sched_port *port,
	uint32_t subport_id,
	struct rte_sched_subport_stats *stats,
	uint32_t *tc_ov);

/**
 * Hierarchical scheduler queue statistics read
 *
 * @param port
 *   Handle to port scheduler instance
 * @param queue_id
 *   Queue ID within port scheduler
 * @param stats
 *   Pointer to pre-allocated subport statistics structure where the statistics
 *   counters should be stored
 * @param qlen
 *   Pointer to pre-allocated variable where the current queue length should be stored.
 * @return
 *   0 upon success, error code otherwise
 */
int
rte_sched_queue_read_stats(struct rte_sched_port *port,
	uint32_t queue_id,
	struct rte_sched_queue_stats *stats,
	uint16_t *qlen);

/*
 * Run-time
 *
 ***/

/**
 * Scheduler hierarchy path write to packet descriptor. Typically called by the
 * packet classification stage.
 *
 * @param pkt
 *   Packet descriptor handle
 * @param subport
 *   Subport ID
 * @param pipe
 *   Pipe ID within subport
 * @param traffic_class
 *   Traffic class ID within pipe (0 .. 3)
 * @param queue
 *   Queue ID within pipe traffic class (0 .. 3)
 */
static inline void
rte_sched_port_pkt_write(struct rte_mbuf *pkt,
	uint32_t subport, uint32_t pipe, uint32_t traffic_class, uint32_t queue, enum rte_meter_color color)
{
	struct rte_sched_port_hierarchy *sched = (struct rte_sched_port_hierarchy *) &pkt->hash.sched;

	sched->color = (uint32_t) color;
	sched->subport = subport;
	sched->pipe = pipe;
	sched->traffic_class = traffic_class;
	sched->queue = queue;
}

/**
 * Scheduler hierarchy path read from packet descriptor (struct rte_mbuf). Typically
 * called as part of the hierarchical scheduler enqueue operation. The subport,
 * pipe, traffic class and queue parameters need to be pre-allocated by the caller.
 *
 * @param pkt
 *   Packet descriptor handle
 * @param subport
 *   Subport ID
 * @param pipe
 *   Pipe ID within subport
 * @param traffic_class
 *   Traffic class ID within pipe (0 .. 3)
 * @param queue
 *   Queue ID within pipe traffic class (0 .. 3)
 *
 */
static inline void
rte_sched_port_pkt_read_tree_path(struct rte_mbuf *pkt, uint32_t *subport, uint32_t *pipe, uint32_t *traffic_class, uint32_t *queue)
{
	struct rte_sched_port_hierarchy *sched = (struct rte_sched_port_hierarchy *) &pkt->hash.sched;

	*subport = sched->subport;
	*pipe = sched->pipe;
	*traffic_class = sched->traffic_class;
	*queue = sched->queue;
}

static inline enum rte_meter_color
rte_sched_port_pkt_read_color(struct rte_mbuf *pkt)
{
	struct rte_sched_port_hierarchy *sched = (struct rte_sched_port_hierarchy *) &pkt->hash.sched;

	return (enum rte_meter_color) sched->color;
}

/**
 * Hierarchical scheduler port enqueue. Writes up to n_pkts to port scheduler and
 * returns the number of packets actually written. For each packet, the port scheduler
 * queue to write the packet to is identified by reading the hierarchy path from the
 * packet descriptor; if the queue is full or congested and the packet is not written
 * to the queue, then the packet is automatically dropped without any action required
 * from the caller.
 *
 * @param port
 *   Handle to port scheduler instance
 * @param pkts
 *   Array storing the packet descriptor handles
 * @param n_pkts
 *   Number of packets to enqueue from the pkts array into the port scheduler
 * @return
 *   Number of packets successfully enqueued
 */
int
rte_sched_port_enqueue(struct rte_sched_port *port, struct rte_mbuf **pkts, uint32_t n_pkts);

/**
 * Hierarchical scheduler port dequeue. Reads up to n_pkts from the port scheduler
 * and stores them in the pkts array and returns the number of packets actually read.
 * The pkts array needs to be pre-allocated by the caller with at least n_pkts entries.
 *
 * @param port
 *   Handle to port scheduler instance
 * @param pkts
 *   Pre-allocated packet descriptor array where the packets dequeued from the port
 *   scheduler should be stored
 * @param n_pkts
 *   Number of packets to dequeue from the port scheduler
 * @return
 *   Number of packets successfully dequeued and placed in the pkts array
 */
int
rte_sched_port_dequeue(struct rte_sched_port *port, struct rte_mbuf **pkts, uint32_t n_pkts);

#ifdef __cplusplus
}
#endif

#endif /* __INCLUDE_RTE_SCHED_H__ */