diff options
Diffstat (limited to 'external/libcurl_android/jni/libcurl/src/tool_help.c')
| -rwxr-xr-x | external/libcurl_android/jni/libcurl/src/tool_help.c | 333 |
1 files changed, 0 insertions, 333 deletions
diff --git a/external/libcurl_android/jni/libcurl/src/tool_help.c b/external/libcurl_android/jni/libcurl/src/tool_help.c deleted file mode 100755 index c255be0b..00000000 --- a/external/libcurl_android/jni/libcurl/src/tool_help.c +++ /dev/null @@ -1,333 +0,0 @@ -/*************************************************************************** - * _ _ ____ _ - * Project ___| | | | _ \| | - * / __| | | | |_) | | - * | (__| |_| | _ <| |___ - * \___|\___/|_| \_\_____| - * - * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al. - * - * This software is licensed as described in the file COPYING, which - * you should have received as part of this distribution. The terms - * are also available at http://curl.haxx.se/docs/copyright.html. - * - * You may opt to use, copy, modify, merge, publish, distribute and/or sell - * copies of the Software, and permit persons to whom the Software is - * furnished to do so, under the terms of the COPYING file. - * - * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY - * KIND, either express or implied. - * - ***************************************************************************/ -#include "tool_setup.h" - -#include "tool_panykey.h" -#include "tool_help.h" -#include "tool_libinfo.h" -#include "tool_version.h" - -#include "memdebug.h" /* keep this as LAST include */ - -#ifdef MSDOS -# define USE_WATT32 -#endif - -/* - * A few of these source lines are >80 columns wide, but that's only because - * breaking the strings narrower makes this chunk look even worse! - * - * Starting with 7.18.0, this list of command line options is sorted based - * on the long option name. It is not done automatically, although a command - * line like the following can help out: - * - * curl --help | cut -c5- | grep "^-" | sort - */ - -static const char *const helptext[] = { - "Usage: curl [options...] <url>", - "Options: (H) means HTTP/HTTPS only, (F) means FTP only", - " --anyauth Pick \"any\" authentication method (H)", - " -a, --append Append to target file when uploading (F/SFTP)", - " --basic Use HTTP Basic Authentication (H)", - " --cacert FILE CA certificate to verify peer against (SSL)", - " --capath DIR CA directory to verify peer against (SSL)", - " -E, --cert CERT[:PASSWD] Client certificate file and password (SSL)", - " --cert-type TYPE Certificate file type (DER/PEM/ENG) (SSL)", - " --ciphers LIST SSL ciphers to use (SSL)", - " --compressed Request compressed response (using deflate or gzip)", - " -K, --config FILE Read config from FILE", - " --connect-timeout SECONDS Maximum time allowed for connection", - " -C, --continue-at OFFSET Resumed transfer OFFSET", - " -b, --cookie STRING/FILE Read cookies from STRING/FILE (H)", - " -c, --cookie-jar FILE Write cookies to FILE after operation (H)", - " --create-dirs Create necessary local directory hierarchy", - " --crlf Convert LF to CRLF in upload", - " --crlfile FILE Get a CRL list in PEM format from the given file", - " -d, --data DATA HTTP POST data (H)", - " --data-ascii DATA HTTP POST ASCII data (H)", - " --data-binary DATA HTTP POST binary data (H)", - " --data-urlencode DATA HTTP POST data url encoded (H)", - " --delegation STRING GSS-API delegation permission", - " --digest Use HTTP Digest Authentication (H)", - " --disable-eprt Inhibit using EPRT or LPRT (F)", - " --disable-epsv Inhibit using EPSV (F)", - " --dns-servers DNS server addrs to use: 1.1.1.1;2.2.2.2", - " --dns-interface Interface to use for DNS requests", - " --dns-ipv4-addr IPv4 address to use for DNS requests, dot notation", - " --dns-ipv6-addr IPv6 address to use for DNS requests, dot notation", - " -D, --dump-header FILE Write the headers to FILE", - " --egd-file FILE EGD socket path for random data (SSL)", - " --engine ENGINE Crypto engine (use \"--engine list\" for list) (SSL)", -#ifdef USE_ENVIRONMENT - " --environment Write results to environment variables (RISC OS)", -#endif - " -f, --fail Fail silently (no output at all) on HTTP errors (H)", - " -F, --form CONTENT Specify HTTP multipart POST data (H)", - " --form-string STRING Specify HTTP multipart POST data (H)", - " --ftp-account DATA Account data string (F)", - " --ftp-alternative-to-user COMMAND " - "String to replace \"USER [name]\" (F)", - " --ftp-create-dirs Create the remote dirs if not present (F)", - " --ftp-method [MULTICWD/NOCWD/SINGLECWD] Control CWD usage (F)", - " --ftp-pasv Use PASV/EPSV instead of PORT (F)", - " -P, --ftp-port ADR Use PORT with given address instead of PASV (F)", - " --ftp-skip-pasv-ip Skip the IP address for PASV (F)\n" - " --ftp-pret Send PRET before PASV (for drftpd) (F)", - " --ftp-ssl-ccc Send CCC after authenticating (F)", - " --ftp-ssl-ccc-mode ACTIVE/PASSIVE Set CCC mode (F)", - " --ftp-ssl-control Require SSL/TLS for FTP login, " - "clear for transfer (F)", - " -G, --get Send the -d data with a HTTP GET (H)", - " -g, --globoff Disable URL sequences and ranges using {} and []", - " -H, --header LINE Pass custom header LINE to server (H)", - " -I, --head Show document info only", - " -h, --help This help text", - " --hostpubmd5 MD5 " - "Hex-encoded MD5 string of the host public key. (SSH)", - " -0, --http1.0 Use HTTP 1.0 (H)", - " --http1.1 Use HTTP 1.1 (H)", - " --http2 Use HTTP 2 (H)", - " --ignore-content-length Ignore the HTTP Content-Length header", - " -i, --include Include protocol headers in the output (H/F)", - " -k, --insecure Allow connections to SSL sites without certs (H)", - " --interface INTERFACE Use network INTERFACE (or address)", - " -4, --ipv4 Resolve name to IPv4 address", - " -6, --ipv6 Resolve name to IPv6 address", - " -j, --junk-session-cookies Ignore session cookies read from file (H)", - " --keepalive-time SECONDS Wait SECONDS between keepalive probes", - " --key KEY Private key file name (SSL/SSH)", - " --key-type TYPE Private key file type (DER/PEM/ENG) (SSL)", - " --krb LEVEL Enable Kerberos with security LEVEL (F)", -#ifndef CURL_DISABLE_LIBCURL_OPTION - " --libcurl FILE Dump libcurl equivalent code of this command line", -#endif - " --limit-rate RATE Limit transfer speed to RATE", - " -l, --list-only List only mode (F/POP3)", - " --local-port RANGE Force use of RANGE for local port numbers", - " -L, --location Follow redirects (H)", - " --location-trusted " - "Like '--location', and send auth to other hosts (H)", - " --login-options OPTIONS Server login options (IMAP, POP3, SMTP)", - " -M, --manual Display the full manual", - " --mail-from FROM Mail from this address (SMTP)", - " --mail-rcpt TO Mail to this/these addresses (SMTP)", - " --mail-auth AUTH Originator address of the original email (SMTP)", - " --max-filesize BYTES Maximum file size to download (H/F)", - " --max-redirs NUM Maximum number of redirects allowed (H)", - " -m, --max-time SECONDS Maximum time allowed for the transfer", - " --metalink Process given URLs as metalink XML file", - " --negotiate Use HTTP Negotiate (SPNEGO) authentication (H)", - " -n, --netrc Must read .netrc for user name and password", - " --netrc-optional Use either .netrc or URL; overrides -n", - " --netrc-file FILE Specify FILE for netrc", - " -: --next " - "Allows the following URL to use a separate set of options", - " --no-alpn Disable the ALPN TLS extension (H)", - " -N, --no-buffer Disable buffering of the output stream", - " --no-keepalive Disable keepalive use on the connection", - " --no-npn Disable the NPN TLS extension (H)", - " --no-sessionid Disable SSL session-ID reusing (SSL)", - " --noproxy List of hosts which do not use proxy", - " --ntlm Use HTTP NTLM authentication (H)", - " --oauth2-bearer TOKEN OAuth 2 Bearer Token (IMAP, POP3, SMTP)", - " -o, --output FILE Write to FILE instead of stdout", - " --pass PASS Pass phrase for the private key (SSL/SSH)", - " --post301 " - "Do not switch to GET after following a 301 redirect (H)", - " --post302 " - "Do not switch to GET after following a 302 redirect (H)", - " --post303 " - "Do not switch to GET after following a 303 redirect (H)", - " -#, --progress-bar Display transfer progress as a progress bar", - " --proto PROTOCOLS Enable/disable PROTOCOLS", - " --proto-redir PROTOCOLS Enable/disable PROTOCOLS on redirect", - " -x, --proxy [PROTOCOL://]HOST[:PORT] Use proxy on given port", - " --proxy-anyauth Pick \"any\" proxy authentication method (H)", - " --proxy-basic Use Basic authentication on the proxy (H)", - " --proxy-digest Use Digest authentication on the proxy (H)", - " --proxy-negotiate " - "Use HTTP Negotiate (SPNEGO) authentication on the proxy (H)", - " --proxy-ntlm Use NTLM authentication on the proxy (H)", - " -U, --proxy-user USER[:PASSWORD] Proxy user and password", - " --proxy1.0 HOST[:PORT] Use HTTP/1.0 proxy on given port", - " -p, --proxytunnel Operate through a HTTP proxy tunnel (using CONNECT)", - " --pubkey KEY Public key file name (SSH)", - " -Q, --quote CMD Send command(s) to server before transfer (F/SFTP)", - " --random-file FILE File for reading random data from (SSL)", - " -r, --range RANGE Retrieve only the bytes within RANGE", - " --raw Do HTTP \"raw\"; no transfer decoding (H)", - " -e, --referer Referer URL (H)", - " -J, --remote-header-name Use the header-provided filename (H)", - " -O, --remote-name Write output to a file named as the remote file", - " --remote-name-all Use the remote file name for all URLs", - " -R, --remote-time Set the remote file's time on the local output", - " -X, --request COMMAND Specify request command to use", - " --resolve HOST:PORT:ADDRESS Force resolve of HOST:PORT to ADDRESS", - " --retry NUM " - "Retry request NUM times if transient problems occur", - " --retry-delay SECONDS Wait SECONDS between retries", - " --retry-max-time SECONDS Retry only within this period", - " --sasl-ir Enable initial response in SASL authentication", - " -S, --show-error " - "Show error. With -s, make curl show errors when they occur", - " -s, --silent Silent mode (don't output anything)", - " --socks4 HOST[:PORT] SOCKS4 proxy on given host + port", - " --socks4a HOST[:PORT] SOCKS4a proxy on given host + port", - " --socks5 HOST[:PORT] SOCKS5 proxy on given host + port", - " --socks5-hostname HOST[:PORT] " - "SOCKS5 proxy, pass host name to proxy", -#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) - " --socks5-gssapi-service NAME SOCKS5 proxy service name for GSS-API", - " --socks5-gssapi-nec Compatibility with NEC SOCKS5 server", -#endif - " -Y, --speed-limit RATE " - "Stop transfers below RATE for 'speed-time' secs", - " -y, --speed-time SECONDS " - "Trigger 'speed-limit' abort after SECONDS (default: 30)", - " --ssl Try SSL/TLS (FTP, IMAP, POP3, SMTP)", - " --ssl-reqd Require SSL/TLS (FTP, IMAP, POP3, SMTP)", - " -2, --sslv2 Use SSLv2 (SSL)", - " -3, --sslv3 Use SSLv3 (SSL)", - " --ssl-allow-beast Allow security flaw to improve interop (SSL)", - " --stderr FILE Where to redirect stderr (use \"-\" for stdout)", - " --tcp-nodelay Use the TCP_NODELAY option", - " -t, --telnet-option OPT=VAL Set telnet option", - " --tftp-blksize VALUE Set TFTP BLKSIZE option (must be >512)", - " -z, --time-cond TIME Transfer based on a time condition", - " -1, --tlsv1 Use => TLSv1 (SSL)", - " --tlsv1.0 Use TLSv1.0 (SSL)", - " --tlsv1.1 Use TLSv1.1 (SSL)", - " --tlsv1.2 Use TLSv1.2 (SSL)", - " --trace FILE Write a debug trace to FILE", - " --trace-ascii FILE Like --trace, but without hex output", - " --trace-time Add time stamps to trace/verbose output", - " --tr-encoding Request compressed transfer encoding (H)", - " -T, --upload-file FILE Transfer FILE to destination", - " --url URL URL to work with", - " -B, --use-ascii Use ASCII/text transfer", - " -u, --user USER[:PASSWORD] Server user and password", - " --tlsuser USER TLS username", - " --tlspassword STRING TLS password", - " --tlsauthtype STRING TLS authentication type (default: SRP)", - " -A, --user-agent STRING Send User-Agent STRING to server (H)", - " -v, --verbose Make the operation more talkative", - " -V, --version Show version number and quit", -#ifdef USE_WATT32 - " --wdebug Turn on Watt-32 debugging", -#endif - " -w, --write-out FORMAT Use output FORMAT after completion", - " --xattr Store metadata in extended file attributes", - " -q Disable .curlrc (must be first parameter)", - NULL -}; - -#ifdef NETWARE -# define PRINT_LINES_PAUSE 23 -#endif - -#ifdef __SYMBIAN32__ -# define PRINT_LINES_PAUSE 16 -#endif - -struct feat { - const char *name; - int bitmask; -}; - -static const struct feat feats[] = { - {"AsynchDNS", CURL_VERSION_ASYNCHDNS}, - {"Debug", CURL_VERSION_DEBUG}, - {"TrackMemory", CURL_VERSION_CURLDEBUG}, - {"IDN", CURL_VERSION_IDN}, - {"IPv6", CURL_VERSION_IPV6}, - {"Largefile", CURL_VERSION_LARGEFILE}, - {"SSPI", CURL_VERSION_SSPI}, - {"GSS-API", CURL_VERSION_GSSAPI}, - {"SPNEGO", CURL_VERSION_SPNEGO}, - {"NTLM", CURL_VERSION_NTLM}, - {"NTLM_WB", CURL_VERSION_NTLM_WB}, - {"SSL", CURL_VERSION_SSL}, - {"krb4", CURL_VERSION_KERBEROS4}, - {"libz", CURL_VERSION_LIBZ}, - {"CharConv", CURL_VERSION_CONV}, - {"TLS-SRP", CURL_VERSION_TLSAUTH_SRP}, - {"HTTP2", CURL_VERSION_HTTP2} -}; - -void tool_help(void) -{ - int i; - for(i = 0; helptext[i]; i++) { - puts(helptext[i]); -#ifdef PRINT_LINES_PAUSE - if(i && ((i % PRINT_LINES_PAUSE) == 0)) - tool_pressanykey(); -#endif - } -} - -void tool_version_info(void) -{ - const char *const *proto; - - printf(CURL_ID "%s\n", curl_version()); - if(curlinfo->protocols) { - printf("Protocols: "); - for(proto = curlinfo->protocols; *proto; ++proto) { - printf("%s ", *proto); - } - puts(""); /* newline */ - } - if(curlinfo->features) { - unsigned int i; - printf("Features: "); - for(i = 0; i < sizeof(feats)/sizeof(feats[0]); i++) { - if(curlinfo->features & feats[i].bitmask) - printf("%s ", feats[i].name); - } -#ifdef USE_METALINK - printf("Metalink "); -#endif - puts(""); /* newline */ - } -} - -void tool_list_engines(CURL *curl) -{ - struct curl_slist *engines = NULL; - - /* Get the list of engines */ - curl_easy_getinfo(curl, CURLINFO_SSL_ENGINES, &engines); - - puts("Build-time engines:"); - if(engines) { - for(; engines; engines = engines->next) - printf(" %s\n", engines->data); - } - else { - puts(" <none>"); - } - - /* Cleanup the list of engines */ - curl_slist_free_all(engines); -} |