LISP: 3-node (func) to 2-node (dev) converstion

Change-Id: I0fbe4d9ef1b30a1ac1382ea43b5b52aeb8a7d39f Signed-off-by: Nidhy <nidhyanandhan.a@hcl.com>
author: Nidhy <nidhyanandhan.a@hcl.com> 2019-08-31 12:53:12 +0000
committer: Peter Mikus <pmikus@cisco.com> 2019-09-19 13:38:58 +0000
commit: aafa2efa63b891e85ff13255691aae4909bc503c (patch)
tree: 9ea9e6d57a25148009a84661fff7a0e30907c529
parent: a295b175cd410e63829a71eb4565f4bc0f6965a4 (diff)
20 files changed, 858 insertions, 584 deletions
diff --git a/docs/tag_documentation.rst b/docs/tag_documentation.rst
index 5c68858bfa..5646cd0781 100644
--- a/docs/tag_documentation.rst
+++ b/docs/tag_documentation.rst
@@ -464,6 +464,26 @@ Encapsulation Tags
 
     All test cases with LISP-GPE.
 
+.. topic:: LISP_IP4o4
+
+    All test cases with LISP_IP4o4.
+
+.. topic:: LISPGPE_IP4o4
+
+    All test cases with LISPGPE_IP4o4.
+
+.. topic:: LISPGPE_IP6o4
+
+    All test cases with LISPGPE_IP6o4.
+
+.. topic:: LISPGEP_IP4o6
+
+    All test cases with LISPGPE_IP4o6.
+
+.. topic:: LISPGPE_IP6o6
+
+    All test cases with LISPGPE_IP6o6.
+
 .. topic:: VXLAN
 
     All test cases with Vxlan.
diff --git a/resources/libraries/robot/overlay/lisp.robot b/resources/libraries/robot/overlay/lisp.robot
new file mode 100644
index 0000000000..826cc3a7b1
--- /dev/null
+++ b/resources/libraries/robot/overlay/lisp.robot
@@ -0,0 +1,153 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library  | resources.libraries.python.LispSetup.LispAdjacency
+| Library  | resources.libraries.python.LispSetup.LispEidTableMap
+| Library  | resources.libraries.python.LispSetup.LispLocalEid
+| Library  | resources.libraries.python.LispSetup.LispLocator
+| Library  | resources.libraries.python.LispSetup.LispLocatorSet
+| Library  | resources.libraries.python.LispSetup.LispRemoteMapping
+| Resource | resources/libraries/robot/shared/default.robot
+
+*** Keywords ***
+| Configure topology for IPv4 LISP testing
+| | [Documentation] | Setup topology for IPv4 LISP testing.
+| | ...
+| | ... | *Example:*
+| | ... | \| Configure topology for IPv4 LISP testing \|
+| | ...
+| | Set interfaces in path up
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip4} | ${ip4_plen}
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip4} | ${ip4_plen}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if1} | ${src_ip4} | ${tg_if1_mac}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | ${dst_ip4} | ${tg_if2_mac}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip4} | ${tg_if2_mac}
+
+| Configure topology for IPv6 LISP testing
+| | [Documentation] | Setup topology fo IPv6 LISP testing.
+| | ...
+| | ... | *Example:*
+| | ... | \| Configure topology for IPv6 LISP testing \|
+| | ...
+| | Set interfaces in path up
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip6} | ${ip6_plen}
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip6} | ${ip6_plen}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if1} | ${src_ip6} | ${tg_if1_mac}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | ${dst_ip6} | ${tg_if2_mac}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip6} | ${tg_if2_mac}
+
+| Configure LISP in 2-node circular topology
+| | [Documentation] | Configure LISP topology in 2-node circular topology.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut1 - DUT1 node. Type: dictionary
+| | ... | - dut1_if - DUT1 node interface. Type: string
+| | ... | - dut1_int_index - DUT1 node interface index. Type: integer
+| | ... | - locator_set - Locator set values. Type: dictionary
+| | ... | - dut1_eid - DUT1 node eid address. Type: dictionary
+| | ... | - dut1_static_adjacency - DUT1 static adjacency. Type: dictionary
+| | ... | - is_gpe - To enable GPE. Other than zero to enable Type: integer
+| | ... | - vni_table - vni table Eid Table Mapping Type: integer
+| | ... | - vrf_table - vrf table Eid Table Mapping Type: integer
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ... | \| Configure LISP in 2-node circular topology \
+| | ... | \| ${dut1} \| ${interface_name} \
+| | ... | \| None \| ${locator_set} \| ${dut1_eid} \
+| | ... | \| ${dut1_static_adjacency} \|
+| | ...
+| | [Arguments]
+| | ... | ${dut1} | ${dut1_if} | ${dut1_int_index}
+| | ... | ${locator_set} | ${dut1_eid}
+| | ... | ${dut1_static_adjacency}
+| | ... | ${is_gpe}=0
+| | ... | ${vni_table}=0 | ${vrf_table}=0
+| | ...
+# DUT1 settings:
+| | ${dut1_int_index}= | Run Keyword If | ${dut1_int_index} is None
+| |  ... | Get Interface Sw Index | ${dut1} | ${dut1_if}
+| |  ... | ELSE | Set Variable | ${dut1_int_index}
+| | Enable Lisp | ${dut1}
+| | Run keyword if | ${is_gpe} != 0
+| | ... | Enable Lisp GPE | ${dut1}
+| | Vpp Add Lisp Locator Set | ${dut1} | ${locator_set['locator_name']}
+| | Vpp Add Lisp Locator | ${dut1} | ${locator_set['locator_name']}
+| | ... | ${dut1_int_index} | ${locator_set['priority']}
+| | ... | ${locator_set['weight']}
+| | Run keyword if | ${is_gpe} != 0
+| | ... | Vpp Lisp Eid Table Mapping | ${dut1}
+| | ... | ${vni_table}
+| | ... | vrf=${vrf_table}
+| | Vpp Add Lisp Local Eid | ${dut1} | ${dut1_eid['locator_name']}
+| | ... | ${dut1_eid['vni']} | ${dut1_eid['eid']} | ${dut1_eid['prefix']}
+| | Vpp Add Lisp Remote Mapping | ${dut1} | ${dut1_static_adjacency['vni']}
+| | ... | ${dut1_static_adjacency['deid']}
+| | ... | ${dut1_static_adjacency['prefix']}
+| | ... | ${dut1_static_adjacency['seid']}
+| | ... | ${dut1_static_adjacency['prefix']}
+| | ... | ${dut1_static_adjacency['rloc']}
+| | Vpp Add Lisp Adjacency | ${dut1} | ${dut1_static_adjacency['vni']}
+| | ... | ${dut1_static_adjacency['deid']}
+| | ... | ${dut1_static_adjacency['prefix']}
+| | ... | ${dut1_static_adjacency['seid']}
+| | ... | ${dut1_static_adjacency['prefix']}
+
+| Configure topology for IPv6 LISPoIP4 testing
+| | [Documentation] | Setup topology fo IPv6 LISPoIPV4 testing.
+| | ...
+| | ... | *Example:*
+| | ... | \| Configure topology for IPv6 LISPoIP4 testing \|
+| | ...
+| | Set interfaces in path up
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip6} | ${ip6_plen}
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip4} | ${ip4_plen}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if1} | ${src_ip6} | ${tg_if1_mac}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | ${dst_ip6} | ${tg_if2_mac}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip4} | ${tg_if2_mac}
+
+| Configure topology for IPv4 LISPoIP6 testing
+| | [Documentation] | Setup topology fo IPv4 LISPoIPV6 testing.
+| | ...
+| | ... | *Example:*
+| | ... | \| Configure topology for IPv4 LISPoIP6 testing \|
+| | ...
+| | Set interfaces in path up
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip4} | ${ip4_plen}
+| | VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if2} | ${dut_if2_ip6} | ${ip6_plen}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if1} | ${src_ip4} | ${tg_if1_mac}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | ${dst_ip4} | ${tg_if2_mac}
+| | VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if2} | ${tg_if2_ip6} | ${tg_if2_mac}
diff --git a/resources/libraries/robot/overlay/lispgpe.robot b/resources/libraries/robot/overlay/lispgpe.robot
index d5115d8242..5c611a56a9 100644
--- a/resources/libraries/robot/overlay/lispgpe.robot
+++ b/resources/libraries/robot/overlay/lispgpe.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot
index 3da2026ba6..8985bd2434 100644
--- a/resources/libraries/robot/shared/default.robot
+++ b/resources/libraries/robot/shared/default.robot
@@ -26,6 +26,10 @@
 | Library | resources.libraries.python.Cop
 | Library | resources.libraries.python.DUTSetup
 | Library | resources.libraries.python.L2Util
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.IPUtil
+| Library | resources.libraries.python.IPv6Util
+| Library | resources.libraries.python.NodePath
 | Library | resources.libraries.python.Namespaces
 | Library | resources.libraries.python.PapiHistory
 | Library | resources.libraries.python.SchedUtils
@@ -49,6 +53,9 @@
 | Resource | resources/libraries/robot/l2/l2_xconnect.robot
 | Resource | resources/libraries/robot/l2/tagging.robot
 | Resource | resources/libraries/robot/overlay/srv6.robot
+| Resource | resources/libraries/robot/overlay/lisp.robot
+| Resource | resources/libraries/robot/overlay/lispgpe.robot
+| Resource | resources/libraries/robot/overlay/lisp_api.robot
 | Resource | resources/libraries/robot/performance/performance_configuration.robot
 | Resource | resources/libraries/robot/performance/performance_limits.robot
 | Resource | resources/libraries/robot/performance/performance_utils.robot
@@ -59,6 +66,7 @@
 | Resource | resources/libraries/robot/shared/suite_setup.robot
 | Resource | resources/libraries/robot/shared/test_teardown.robot
 | Resource | resources/libraries/robot/shared/test_setup.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
 | Resource | resources/libraries/robot/shared/traffic.robot
 | Resource | resources/libraries/robot/shared/vm.robot
 
diff --git a/resources/libraries/robot/shared/traffic.robot b/resources/libraries/robot/shared/traffic.robot
index dc3cc054b2..294d0a7deb 100644
--- a/resources/libraries/robot/shared/traffic.robot
+++ b/resources/libraries/robot/shared/traffic.robot
@@ -886,3 +886,141 @@
 | | ${args}= | Set Variable If | "${r_tunnel}" == "${None}" | ${args}
 | | ... | ${args} --dst_tun ${r_tunnel}
 | | Run Traffic Script On Node | ipsec.py | ${node} | ${args}
+
+| Send packet and verify LISP encap
+| | [Documentation] | Send ICMP packet to DUT out one interface and receive\
+| | ... | a LISP encapsulated packet on the other interface.
+| | ...
+| | ... | *Arguments:*
+| | ...
+| | ... | _NOTE:_ Arguments are based on topology:
+| | ... | TG(if1)->(if1)DUT(if2)->TG(if2)
+| | ...
+| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary
+| | ... | - src_ip - IP of source interface (TG-if1). Type: string
+| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string
+| | ... | - tx_src_port - Interface of TG-if1. Type: string
+| | ... | - tx_src_mac - MAC address of TG-if1. Type: string
+| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string
+| | ... | - rx_port - Interface of TG-if1. Type: string
+| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string
+| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string
+| | ... | - src_rloc - configured RLOC source address. Type: string
+| | ... | - dst_rloc - configured RLOC destination address. Type: string
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \
+| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \
+| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \
+| | ... | \| 10.0.1.2 \|
+| | ...
+| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port}
+| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac}
+| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc}
+| | ...
+| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port}
+| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port}
+| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac
+| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac
+| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip}
+| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name}
+| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc}
+| | Run Traffic Script On Node | lisp/lisp_check.py | ${tg_node}
+| | ... | ${args}
+
+| Send packet and verify LISP GPE encap
+| | [Documentation] | Send ICMP packet to DUT out one interface and receive\
+| | ... | a LISP-GPE encapsulated packet on the other interface.
+| | ...
+| | ... | *Arguments:*
+| | ...
+| | ... | _NOTE:_ Arguments are based on topology:
+| | ...             | TG(if1)->(if1)DUT(if2)->TG(if2)
+| | ...
+| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary
+| | ... | - src_ip - IP of source interface (TG-if1). Type: string
+| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string
+| | ... | - tx_src_port - Interface of TG-if1. Type: string
+| | ... | - tx_src_mac - MAC address of TG-if1. Type: string
+| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string
+| | ... | - rx_port - Interface of TG-if1. Type: string
+| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string
+| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string
+| | ... | - src_rloc - configured RLOC source address. Type: string
+| | ... | - dst_rloc - configured RLOC destination address. Type: string
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Send packet and verify LISP GPE encap \| ${nodes['TG']} \
+| | ... | \| 10.0.0.1 \| 32.0.0.1 \
+| | ... | \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \
+| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \
+| | ... | \| 10.0.1.1 \| 10.0.1.2 \|
+| | ...
+| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port} |
+| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac}
+| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc}
+| | ...
+| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port}
+| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port}
+| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac
+| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac
+| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip}
+| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name}
+| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc}
+| | Run Traffic Script On Node | lisp/lispgpe_check.py | ${tg_node}
+| | ... | ${args}
+
+| Send packet and verify LISPoTunnel encap
+| | [Documentation] | Send ICMP packet to DUT out one interface and receive\
+| | ... | a LISP encapsulated packet on the other interface.
+| | ...
+| | ... | *Arguments:*
+| | ...
+| | ... | _NOTE:_ Arguments are based on topology:
+| | ... | TG(if1)->(if1)DUT(if2)->TG(if2)
+| | ...
+| | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary
+| | ... | - src_ip - IP of source interface (TG-if1). Type: string
+| | ... | - dst_ip - IP of destination interface (TG-if2). Type: string
+| | ... | - tx_src_port - Interface of TG-if1. Type: string
+| | ... | - tx_src_mac - MAC address of TG-if1. Type: string
+| | ... | - tx_dst_mac - MAC address of DUT-if1. Type: string
+| | ... | - rx_port - Interface of TG-if1. Type: string
+| | ... | - rx_src_mac - MAC address of DUT1-if2. Type: string
+| | ... | - rx_dst_mac - MAC address of TG-if2. Type: string
+| | ... | - src_rloc - configured RLOC source address. Type: string
+| | ... | - dst_rloc - configured RLOC destination address. Type: string
+| | ... | - ot_mode - overlay tunnel mode. Type: string
+| | ...
+| | ... | *Return:*
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Send packet and verify LISP encap \| ${nodes['TG']} \| 10.0.0.1 \
+| | ... | \| 32.0.0.1 \| eth2 \| 08:00:27:ee:fd:b3 \| 08:00:27:a2:52:5b \
+| | ... | \| eth3 \| 08:00:27:4d:ca:7a \| 08:00:27:7d:fd:10 \| 10.0.1.1 \
+| | ... | \| 10.0.1.2 \|
+| | ...
+| | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_src_port}
+| | ... | ${tx_src_mac} | ${tx_dst_mac} | ${rx_port} | ${rx_src_mac}
+| | ... | ${rx_dst_mac} | ${src_rloc} | ${dst_rloc} | ${ot_mode}
+| | ...
+| | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_src_port}
+| | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port}
+| | ${args}= | Catenate | --tg_src_mac | ${tx_src_mac} | --tg_dst_mac
+| | ... | ${rx_dst_mac} | --dut_if1_mac | ${tx_dst_mac} | --dut_if2_mac
+| | ... | ${rx_src_mac} | --src_ip | ${src_ip} | --dst_ip | ${dst_ip}
+| | ... | --tx_if | ${tx_port_name} | --rx_if | ${rx_port_name}
+| | ... | --src_rloc | ${src_rloc} | --dst_rloc | ${dst_rloc}
+| | ... | --ot_mode | ${ot_mode}
+| | Run Traffic Script On Node | lisp/lispgpe_check.py | ${tg_node}
+| | ... | ${args}
diff --git a/resources/test_data/lisp/lisp.py b/resources/test_data/lisp/lisp.py
new file mode 100644
index 0000000000..4539f8208d
--- /dev/null
+++ b/resources/test_data/lisp/lisp.py
@@ -0,0 +1,93 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Test variables of lisp and lispgpe (ip4/ip6) encapsulation test suite."""
+
+# Lisp default global value
+locator_name = 'tst_locator'
+
+# Test configuration data
+tg_if1_ip4= '6.0.0.2'
+tg_if2_ip4= '6.0.1.2'
+dut_if1_ip4= '6.0.0.1'
+dut_if2_ip4= '6.0.1.1'
+tg_if2_ip6= '6:0:1::2'
+dut_if2_ip6= '6:0:1::1'
+ip4_plen= 24
+src_ip4= '6.0.0.2'
+dst_ip4= '6.0.2.2'
+src_rloc4= dut_if2_ip4
+dst_rloc4= tg_if2_ip4
+src_rloc6= dut_if2_ip6
+dst_rloc6= tg_if2_ip6
+
+#IP6 over IP4 LISP configuration data
+tg_if1_ip6= '6::2'
+dut_if1_ip6= '6:0:0::1'
+src_ip6= '6::2'
+dst_ip6= '6:0:2::2'
+ip6_plen=64
+
+# Lisp default locator_set value
+duts_locator_set = {'locator_name': locator_name,
+                    'priority': 1,
+                    'weight': 1}
+
+# IPv4 Lisp static mapping configuration
+
+dut1_to_tg_ip4_static_adjacency = {'vni': 0,
+                                   'deid': '6.0.2.0',
+                                   'seid': '6.0.0.0',
+                                   'rloc': '6.0.1.2',
+                                   'prefix': 24}
+
+dut1_ip4_eid = {'locator_name': locator_name,
+                'vni': 0,
+                'eid': '6.0.0.0',
+                'prefix': 24}
+
+# IPv6 Lisp static mapping configuration
+
+dut1_to_tg_ip6_static_adjacency = {'vni': 0,
+                                   'deid': '6:0:2::0',
+                                   'seid': '6:0:0::0',
+                                   'rloc': '6:0:1::2',
+                                   'prefix': 64}
+
+dut1_ip6_eid = {'locator_name': locator_name,
+                'vni': 0,
+                'eid': '6:0:0::0',
+                'prefix': 64}
+
+
+#IPv6 over IPv4 LISP mapping
+dut1_ip6o4_static_adjacency = {'vni': 0,
+                               'deid': '6:0:2::0',
+                               'seid': '6:0:0::0',
+                               'rloc': '6.0.1.2',
+                               'prefix': 64}
+dut1_ip6o4_eid = {'locator_name': locator_name,
+                  'vni': 0,
+                  'eid': '6:0:0::0',
+                  'prefix': 64}
+
+#IPv4 over IPv6 LISP mapping
+dut1_ip4o6_static_adjacency = {'vni': 0,
+                               'deid': '6.0.2.0',
+                               'seid': '6.0.0.0',
+                               'rloc': '6:0:1::2',
+                               'prefix': 24}
+dut1_ip4o6_eid = {'locator_name': locator_name,
+                  'vni': 0,
+                  'eid': '6.0.0.0',
+                  'prefix': 24}
diff --git a/resources/traffic_scripts/lisp/lisp_check.py b/resources/traffic_scripts/lisp/lisp_check.py
index 5e1a835b74..9937de8077 100755
--- a/resources/traffic_scripts/lisp/lisp_check.py
+++ b/resources/traffic_scripts/lisp/lisp_check.py
@@ -72,7 +72,8 @@ def main():
 
     args = TrafficScriptArg(
         ['tg_src_mac', 'tg_dst_mac', 'src_ip', 'dst_ip', 'dut_if1_mac',
-         'dut_if2_mac', 'src_rloc', 'dst_rloc'])
+         'dut_if2_mac', 'src_rloc', 'dst_rloc'],
+        ['ot_mode'])
 
     tx_src_mac = args.get_arg('tg_src_mac')
     tx_dst_mac = args.get_arg('dut_if1_mac')
@@ -84,6 +85,7 @@ def main():
     dst_rloc = args.get_arg("dst_rloc")
     tx_if = args.get_arg('tx_if')
     rx_if = args.get_arg('rx_if')
+    ot_mode = args.get_arg('ot_mode')
 
     rxq = RxQueue(rx_if)
     txq = TxQueue(tx_if)
@@ -124,9 +126,17 @@ def main():
 
     ip = ether.payload
 
-    if not isinstance(ip, ip_format):
-        raise RuntimeError(
-            "Not an IP packet received {0}".format(ip.__repr__()))
+    if ot_mode == '6to4':
+        if not isinstance(ip, IP):
+            raise RuntimeError(
+                "Not an IP packet received {0}".format(ip.__repr__()))
+    elif ot_mode == '4to6':
+        if not isinstance(ip, IP6):
+            raise RuntimeError(
+                "Not an IP packet received {0}".format(ip.__repr__()))
+    elif not isinstance(ip, ip_format):
+            raise RuntimeError(
+                "Not an IP packet received {0}".format(ip.__repr__()))
 
     lisp = ether.getlayer(lisp_layer)
     if not lisp:
diff --git a/resources/traffic_scripts/lisp/lispgpe_check.py b/resources/traffic_scripts/lisp/lispgpe_check.py
index 7979b6ced9..d4de8635d7 100755
--- a/resources/traffic_scripts/lisp/lispgpe_check.py
+++ b/resources/traffic_scripts/lisp/lispgpe_check.py
@@ -96,7 +96,8 @@ def main():
 
     args = TrafficScriptArg(
         ['tg_src_mac', 'tg_dst_mac', 'src_ip', 'dst_ip', 'dut_if1_mac',
-         'dut_if2_mac', 'src_rloc', 'dst_rloc'])
+         'dut_if2_mac', 'src_rloc', 'dst_rloc'],
+        ['ot_mode'])
 
     tx_src_mac = args.get_arg('tg_src_mac')
     tx_dst_mac = args.get_arg('dut_if1_mac')
@@ -108,6 +109,7 @@ def main():
     dst_rloc = args.get_arg("dst_rloc")
     tx_if = args.get_arg('tx_if')
     rx_if = args.get_arg('rx_if')
+    ot_mode = args.get_arg('ot_mode')
 
     rxq = RxQueue(rx_if)
     txq = TxQueue(tx_if)
@@ -146,9 +148,17 @@ def main():
 
     ip = ether.payload
 
-    if not isinstance(ip, ip_format):
-        raise RuntimeError(
-            "Not an IP packet received {0}".format(ip.__repr__()))
+    if ot_mode == '6to4':
+        if not isinstance(ip, IP):
+            raise RuntimeError(
+                "Not an IP packet received {0}".format(ip.__repr__()))
+    elif ot_mode == '4to6':
+        if not isinstance(ip, IPv6):
+            raise RuntimeError(
+                "Not an IP packet received {0}".format(ip.__repr__()))
+    elif not isinstance(ip, ip_format):
+            raise RuntimeError(
+                "Not an IP packet received {0}".format(ip.__repr__()))
 
     lisp = ether.getlayer(LispGPEHeader).underlayer
     if not lisp:
diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot
new file mode 100644
index 0000000000..db5b3227d4
--- /dev/null
+++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-dev.robot
@@ -0,0 +1,82 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+# Import configuration and test data:
+| Variables | resources/test_data/lisp/lisp.py
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | IP4FWD | LISP_IP4o4
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *ip4-lisp-ip4 encapsulation test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\
+| ... | circular topology with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4\
+| ... | on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing\
+| ... | over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT is configured with IPv4\
+| ... | routing and static routes. LISPoIPv4 tunnel is\
+| ... | configured between DUT1 and TG2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\
+| ... | are sent by TG on if1 link to DUT1; on receive TG verifies\
+| ... | packets for correctness and their IPv4 src-addr, dst-addr\
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${54}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] On DUT1 configure LISP.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Configure topology for IPv4 LISP testing
+| | And Configure LISP in 2-node circular topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid}
+| | ... | ${dut1_to_tg_ip4_static_adjacency}
+| | Then Send packet and verify LISP encap
+| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4}
+| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${src_rloc4} | ${dst_rloc4}
+
+*** Test Cases ***
+| tc01-46B-ethip4lisp-ip4base-dev
+| | [Tags] | 46B
+| | frame_size=${46} | phy_cores=${0}
diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot
new file mode 100644
index 0000000000..f4b2cb50c1
--- /dev/null
+++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-dev.robot
@@ -0,0 +1,83 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+# Import configuration and test data:
+| Variables | resources/test_data/lisp/lisp.py
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | IP4FWD | LISPGPE_IP4o4
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *ip4-lispgpe-ip4 encapsulation test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\
+| ... | circular topology with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv4-ICMPv4\
+| ... |  on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4\
+| ... |  routing over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\
+| ... | with IPv4 routing and static routes. LISPoIPv4 tunnel is\
+| ... | configured between DUT1 and TG.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\
+| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies packets\
+| ... | for correctness and their IPv4 src-addr, dst-addr and\
+| ... | MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${54}
+| ${is_gpe}= | ${1}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] On DUT1 configure LISP.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Configure topology for IPv4 LISP testing
+| | And Configure LISP in 2-node circular topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4_eid}
+| | ... | ${dut1_to_tg_ip4_static_adjacency} | ${is_gpe}
+| | Then Send packet and verify LISP GPE encap
+| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4}
+| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${src_rloc4} | ${dst_rloc4}
+
+*** Test Cases ***
+| tc01-46B-ethip4lispgpe-ip4base-dev
+| | [Tags] | 46B
+| | frame_size=${46} | phy_cores=${0}
diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot
new file mode 100644
index 0000000000..402bfbfee2
--- /dev/null
+++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot
@@ -0,0 +1,85 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+# import additional Lisp settings from resource file
+| Variables | resources/test_data/lisp/lisp.py
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | IP4FWD | LISPGPE_IP6o4
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *ip4-lispgpe-ip6 encapsulation test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG(if1)-DUT1-TG(if2) 2-node\
+| ... | circular topology with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv6-ICMPv6\
+| ... | on DUT1-TG(if2),Eth-IPv6-ICMPv6 on TG-DUTn for IPv6\
+| ... | routing over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\
+| ... | with IPv6 routing and static routes. LISPoIPv4 tunnel is\
+| ... | configured between DUT1 and TG(if2).
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\
+| ... | are sent in if1 by TG on links to DUT1; on receive\
+| ... | TG verifies packets for correctness and their IPv6 src-addr,\
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${54}
+| ${ot_mode}= | 6to4
+| ${is_gpe}= | ${1}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] On DUT1 configure LISPGPE\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Configure topology for IPv6 LISPoIP4 testing
+| | And Vpp All RA Suppress Link Layer | ${nodes}
+| | And Configure LISP in 2-node circular topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${is_gpe}
+| | Then Send packet and verify LISPoTunnel encap
+| | ... | ${tg} | ${tg_if1_ip6} | ${dst_ip6}
+| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${src_rloc4} | ${dst_rloc4} | ${ot_mode}
+
+*** Test Cases ***
+| tc01-62B-ethip4lispgpe-ip6base-dev
+| | [Tags] | 62B
+| | frame_size=${62} | phy_cores=${0}
diff --git a/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot
new file mode 100644
index 0000000000..084f8c694a
--- /dev/null
+++ b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-dev.robot
@@ -0,0 +1,84 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+# Import configuration and test data:
+| Variables | resources/test_data/lisp/lisp.py
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | IP6FWD | LISPGPE_IP4o6
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *ip6-lispgpe-ip4 encapsulation test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular\
+| ... | topology with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv4-ICMPv4\
+| ... |  on DUT1-TG, Eth-IPv4-ICMPv4 on TG-DUTn for IPv6 routing\
+| ... |  over LISPoIPv6 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\
+| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is\
+| ... | configured between DUT1 and TG.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are\
+| ... | sent in TG->DUT(if1); On receive TG(if2) verifies packets for\
+| ... | correctness and their IPv4 src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${54}
+| ${ot_mode}= | 4to6
+| ${is_gpe}= | ${1}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] On DUT1 configure LISP.\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Configure topology for IPv4 LISPoIP6 testing
+| | And Vpp All RA Suppress Link Layer | ${nodes}
+| | And Configure LISP in 2-node circular topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid}
+| | ... | ${dut1_ip4o6_static_adjacency} | ${is_gpe}
+| | Then Send packet and verify LISPoTunnel encap
+| | ... | ${tg} | ${tg_if1_ip4} | ${dst_ip4}
+| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${src_rloc6} | ${dst_rloc6} | ${ot_mode}
+
+*** Test Cases ***
+| tc01-46B-ethip6lispgpe-ip4base-dev
+| | [Tags] | 46B
+| | frame_size=${46} | phy_cores=${0}
diff --git a/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot
new file mode 100644
index 0000000000..e2b74c2730
--- /dev/null
+++ b/tests/vpp/device/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-dev.robot
@@ -0,0 +1,83 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+# Import configuration and test data:
+| Variables | resources/test_data/lisp/lisp.py
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | IP6FWD | LISPGPE_IP6o6
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *ip6-lispgpe-ip6 encapsulation test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node\
+| ... | circular topology with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISPGPE-IPv6-ICMPv6\
+| ... | on DUT1-TG, Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing\
+| ... | over LISPoIPv6 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\
+| ... | with IPv6 routing and static routes. LISPoIPv6 tunnel is\
+| ... | configured between DUT1 and TG.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\
+| ... | are sent in TG->DUT(if1); On receive TG(if2) verifies\
+| ... | packets for correctness and their IPv6 src-addr,\
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${54}
+| ${is_gpe}= | ${1}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] On DUT1 configure LISP.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Configure topology for IPv6 LISP testing
+| | And Configure LISP in 2-node circular topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6_eid}
+| | ... | ${dut1_to_tg_ip6_static_adjacency} | ${is_gpe}
+| | Then Send packet and verify LISP GPE encap
+| | ... | ${tg} | ${tg_if1_ip6} | ${dst_ip6}
+| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${src_rloc6} | ${dst_rloc6}
+
+*** Test Cases ***
+| tc01-62B-ethip6lispgpe-ip6base-dev
+| | [Tags] | 62B
+| | frame_size=${62} | phy_cores=${0}
diff --git a/tests/vpp/func/ip4_tunnels/__init__.robot b/tests/vpp/func/ip4_tunnels/__init__.robot
deleted file mode 100644
index 501a130d68..0000000000
--- a/tests/vpp/func/ip4_tunnels/__init__.robot
+++ /dev/null
@@ -1,12 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
diff --git a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-func.robot b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-func.robot
deleted file mode 100644
index a2d1da3e52..0000000000
--- a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lisp-ip4base-func.robot
+++ /dev/null
@@ -1,129 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library  | resources.libraries.python.IPUtil
-| Library  | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-# import additional Lisp settings from resource file
-| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| ... | VM_ENV | HW_ENV
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *IP AFI independent functional tests.*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\
-| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv4 tunnel is\
-| ... | configured between DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv4 src-addr,\
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv4 over LISPoIPv4 tunnel after disable-enable
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg1] On DUT1 and DUT2 configure IPv4 LISP static adjacencies.
-| | ... | [Ver1] Make TG send ICMPv4 Echo Req between its interfaces across\
-| | ... | both DUTs and LISP tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Cfg2] Disable LISP.
-| | ... | [Ver2] Verify packets are not received via LISP tunnel.
-| | ... | [Cfg3] Re-enable LISP.
-| | ... | [Ver3] Verify packets are received again via LISP tunnel.
-| | ... | [Ref] RFC6830.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${dut1_to_dut2_ip4} | ${prefix4}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${dut1_to_tg_ip4} | ${prefix4}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${dut2_to_dut1_ip4} | ${prefix4}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
-| | And VPP Add IP Neighbor
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} | ${tg_to_dut2_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} | ${tg_to_dut1_mac}
-| | When Configure LISP topology in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| | When Disable Lisp | ${dut1_node}
-| | Then Packet transmission from port to port should fail
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Packet transmission from port to port should fail
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| | When Enable Lisp | ${dut1_node}
-| | And Vpp Add Lisp Adjacency | ${dut1_node}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency['vni']}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency['deid']}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency['prefix']}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency['seid']}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency['prefix']}
-| | And Vpp Add Lisp Adjacency | ${dut2_node}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency['vni']}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency['deid']}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency['prefix']}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency['seid']}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency['prefix']}
-| | Then Wait Until Keyword Succeeds | 2x | 5s | Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Wait Until Keyword Succeeds | 2x | 5s | Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
diff --git a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-func.robot b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-func.robot
deleted file mode 100644
index adde88ab4f..0000000000
--- a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip4base-func.robot
+++ /dev/null
@@ -1,107 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.VhostUser
-| Library | resources.libraries.python.VPPUtil
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/overlay/lispgpe.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv4/ipv4_lispgpe_ipv4.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down LISP functional test
-| ...
-| Documentation | *ip4-lispgpe-ip4 encapsulation test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\
-| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv4 tunnel is configured between\
-| ... | DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in\
-| ... | both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr\
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Add IP Neighbors
-| | When Configure LISP GPE topology in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-*** Keywords ***
-| Add IP Neighbors
-| | [Documentation]
-| | ... | Add IP neighbors to physical interfaces on DUTs.
-| | ...
-| | VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4} | ${tg_to_dut1_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4} | ${tg_to_dut2_mac}
-| | VPP Add IP Neighbor | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip4} | ${dut2_to_dut1_mac}
-| | VPP Add IP Neighbor | ${dut2_node}
-| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip4} | ${dut1_to_dut2_mac}
diff --git a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-func.robot b/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-func.robot
deleted file mode 100644
index ce8b910854..0000000000
--- a/tests/vpp/func/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-func.robot
+++ /dev/null
@@ -1,110 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library  | resources.libraries.python.IPUtil
-| Library  | resources.libraries.python.Trace
-| Library | resources.libraries.python.VhostUser
-| Library  | resources.libraries.python.VPPUtil
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Resource | resources/libraries/robot/overlay/lispgpe.robot
-| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-# import additional Lisp settings from resource file
-| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| ... | VM_ENV | HW_ENV
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *LISP static adjacency test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2,\
-| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static routes. LISPoIPv4 tunnel is configured\
-| ... | between DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv6 src-addr,\
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] On DUT1 and DUT2 configure IPv4 LISP static adjacencies.
-| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP tunnel between them; verify IPv6 headers on received\
-| | ... | packets are correct.
-| | ... | [Cfg2] Reconf LISP.
-| | ... | [Ver2] Verify packets are received again via LISP tunnel.
-| | ... | [Ref] RFC6830.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${dut1_to_dut2_ip6o4} | ${dut_prefix6o4}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${dut2_to_dut1_ip6o4} | ${dut_prefix6o4}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4}
-| | And Add IP Neighbors
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | When Configure LISP topology in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-*** Keywords ***
-| Add IP Neighbors
-| | [Documentation]
-| | ... | Add IP neighbors to physical interfaces on DUTs.
-| | ...
-| | VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4} | ${tg_to_dut1_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4} | ${tg_to_dut2_mac}
-| | VPP Add IP Neighbor | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4} | ${dut2_to_dut1_mac}
-| | VPP Add IP Neighbor | ${dut2_node}
-| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4} | ${dut1_to_dut2_mac}
diff --git a/tests/vpp/func/ip6_tunnels/__init__.robot b/tests/vpp/func/ip6_tunnels/__init__.robot
deleted file mode 100644
index 501a130d68..0000000000
--- a/tests/vpp/func/ip6_tunnels/__init__.robot
+++ /dev/null
@@ -1,12 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot
deleted file mode 100644
index 06aec5f09a..0000000000
--- a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip4base-func.robot
+++ /dev/null
@@ -1,99 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library  | resources.libraries.python.IPUtil
-| Library  | resources.libraries.python.Trace
-| ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
-| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-# import additional Lisp settings from resource file
-| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| ... | VM_ENV | HW_ENV
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *LISP static adjacency test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv4-ICMPv4 on\
-| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6\
-| ... | tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv6 tunnel is configured\
-| ... | between DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv4 src-addr,\
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv6 tunnel
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv6-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] On DUT1 and DUT2 configure IPv6 LISP static adjacencies.
-| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP tunnel between them; verify IPv4 headers on received\
-| | ... | packets are correct.
-| | ... | [Cfg2] Reconf LISP.
-| | ... | [Ver2] Verify packets are received again via LISP tunnel.
-| | ... | [Ref] RFC6830.
-| | ...
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2}
-| | ... | ${dut1_to_dut2_ip4o6} | ${dut_prefix4o6}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${dut1_to_tg_ip4o6} | ${tg_prefix4o6}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_dut1}
-| | ... | ${dut2_to_dut1_ip4o6} | ${dut_prefix4o6}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_tg}
-| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4o6}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4o6}
-| | VPP Add IP Neighbor
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4o6} | ${tg_to_dut2_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4o6} | ${tg_to_dut1_mac}
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | When Configure LISP topology in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
diff --git a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot b/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot
deleted file mode 100644
index 6b6d2a3311..0000000000
--- a/tests/vpp/func/ip6_tunnels/lisp/eth2p-ethip6lispgpe-ip6base-func.robot
+++ /dev/null
@@ -1,106 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.VPPUtil
-| ...
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/overlay/lispgpe.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/ipv6_lispgpe_ipv6/ipv6_lispgpe_ipv6.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
-| ...
-| Test Setup | Run Keywords | Set up functional test
-| ... | AND  | Vpp All Ra Suppress Link Layer | ${nodes}
-| ...
-| Test Teardown | Tear down LISP functional test
-| ...
-| Documentation | *ip6-lispgpe-ip6 encapsulation test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2,\
-| ... | Eth-IPv6-ICMPv6 on TG-DUTn for IPv6 routing over LISPoIPv6 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
-| ... | routing and static routes. LISPoIPv6 tunnel is configured between\
-| ... | DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\
-| ... | both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Case: ip6-lispgpe-ip6 - phy2lisp
-| | ... | Make TG send ICMPv6 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6}
-| | And VPP Interface Set IP Address
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Add IP Neighbors
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | When Configure LISP GPE topology in 3-node circular topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| | ... | ${dut1_to_dut2_ip6_static_adjacency}
-| | ... | ${dut2_to_dut1_ip6_static_adjacency}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-*** Keywords ***
-| Add IP Neighbors
-| | [Documentation]
-| | ... | Add IP neighbors to physical interfaces on DUTs.
-| | ...
-| | VPP Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6} | ${tg_to_dut1_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6} | ${tg_to_dut2_mac}
-| | VPP Add IP Neighbor | ${dut1_node}
-| | ... | ${dut1_to_dut2} | ${dut2_to_dut1_ip6} | ${dut2_to_dut1_mac}
-| | VPP Add IP Neighbor | ${dut2_node}
-| | ... | ${dut2_to_dut1} | ${dut1_to_dut2_ip6} | ${dut1_to_dut2_mac}
author	Nidhy <nidhyanandhan.a@hcl.com>	2019-08-31 12:53:12 +0000
committer	Peter Mikus <pmikus@cisco.com>	2019-09-19 13:38:58 +0000
commit	aafa2efa63b891e85ff13255691aae4909bc503c (patch)
tree	9ea9e6d57a25148009a84661fff7a0e30907c529
parent	a295b175cd410e63829a71eb4565f4bc0f6965a4 (diff)