Report: Change the table with test results

Change-Id: I700dea02b03f11910a5646d29bd732252f7a77ef
Signed-off-by: Tibor Frank <tifrank@cisco.com>

4 files changed, 119 insertions, 138 deletions

diff --git a/docs/report/vpp_performance_tests/packet_latency/srv6-3n-hsw-xl710.rst b/docs/report/vpp_performance_tests/packet_latency/srv6-3n-hsw-xl710.rst
index bf11844f0d..0c2d6c2cee 100644
--- a/docs/report/vpp_performance_tests/packet_latency/srv6-3n-hsw-xl710.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/srv6-3n-hsw-xl710.rst
@@ -138,22 +138,23 @@
             \label{fig:hdrh-lat-percentile-3n-hsw-40ge2p1xl710-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-masq}
     \end{figure}
 
-.. raw:: latex
+..
+    .. raw:: latex
 
-    \clearpage
+        \clearpage
 
-.. raw:: html
+    .. raw:: html
 
-    <center>
-    <iframe id="hdrh-lat-percentile-3n-hsw-40ge2p1xl710-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat.html" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/hdrh-lat-percentile-3n-hsw-40ge2p1xl710-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat.html"></iframe>
-    <p><br></p>
-    </center>
+        <center>
+        <iframe id="hdrh-lat-percentile-3n-hsw-40ge2p1xl710-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat.html" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/hdrh-lat-percentile-3n-hsw-40ge2p1xl710-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat.html"></iframe>
+        <p><br></p>
+        </center>
 
-.. raw:: latex
+    .. raw:: latex
 
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{hdrh-lat-percentile-3n-hsw-40ge2p1xl710-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat}
-            \label{fig:hdrh-lat-percentile-3n-hsw-40ge2p1xl710-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat}
-    \end{figure}
+        \begin{figure}[H]
+            \centering
+                \graphicspath{{../_build/_static/vpp/}}
+                \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{hdrh-lat-percentile-3n-hsw-40ge2p1xl710-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat}
+                \label{fig:hdrh-lat-percentile-3n-hsw-40ge2p1xl710-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat}
+        \end{figure}
diff --git a/docs/report/vpp_performance_tests/packet_latency/srv6-3n-tsh-x520.rst b/docs/report/vpp_performance_tests/packet_latency/srv6-3n-tsh-x520.rst
index 6c649fd76a..75983fe696 100644
--- a/docs/report/vpp_performance_tests/packet_latency/srv6-3n-tsh-x520.rst
+++ b/docs/report/vpp_performance_tests/packet_latency/srv6-3n-tsh-x520.rst
@@ -138,22 +138,23 @@
             \label{fig:hdrh-lat-percentile-3n-tsh-10ge2p1x520-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-masq}
     \end{figure}
 
-.. raw:: latex
+..
+    .. raw:: latex
 
-    \clearpage
+        \clearpage
 
-.. raw:: html
+    .. raw:: html
 
-    <center>
-    <iframe id="hdrh-lat-percentile-3n-tsh-10ge2p1x520-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat.html" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/hdrh-lat-percentile-3n-tsh-10ge2p1x520-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat.html"></iframe>
-    <p><br></p>
-    </center>
+        <center>
+        <iframe id="hdrh-lat-percentile-3n-tsh-10ge2p1x520-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat.html" onload="setIframeHeight(this.id)" width="700" frameborder="0" scrolling="no" src="../../_static/vpp/hdrh-lat-percentile-3n-tsh-10ge2p1x520-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat.html"></iframe>
+        <p><br></p>
+        </center>
 
-.. raw:: latex
+    .. raw:: latex
 
-    \begin{figure}[H]
-        \centering
-            \graphicspath{{../_build/_static/vpp/}}
-            \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{hdrh-lat-percentile-3n-tsh-10ge2p1x520-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat}
-            \label{fig:hdrh-lat-percentile-3n-tsh-10ge2p1x520-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat}
-    \end{figure}
+        \begin{figure}[H]
+            \centering
+                \graphicspath{{../_build/_static/vpp/}}
+                \includegraphics[clip, trim=0cm 0cm 5cm 0cm, width=0.70\textwidth]{hdrh-lat-percentile-3n-tsh-10ge2p1x520-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat}
+                \label{fig:hdrh-lat-percentile-3n-tsh-10ge2p1x520-78b-1t1c-ethip6srhip6-ip6base-srv6proxy-stat}
+        \end{figure}
diff --git a/resources/tools/presentation/input_data_parser.py b/resources/tools/presentation/input_data_parser.py
index cd26d69c76..73b9ea114a 100644
--- a/resources/tools/presentation/input_data_parser.py
+++ b/resources/tools/presentation/input_data_parser.py
@@ -214,12 +214,11 @@ class ExecutionChecker(ResultVisitor):
         r'PDR_UPPER:\s(\d+.\d+)'
     )
     REGEX_PERF_MSG_INFO = re.compile(
-        r'NDR_LOWER:\s(\d+.\d+)\s([a-zA-Z]*).*\s(\d+.\d+)\s([a-zA-Z]*).*\n'
-        r'LATENCY.*\[\'(.*)\', \'(.*)\'\].*\n'
-        r'NDR_UPPER:\s(\d+.\d+)\s([a-zA-Z]*).*\s(\d+.\d+)\s([a-zA-Z]*).*\n'
-        r'PDR_LOWER:\s(\d+.\d+)\s([a-zA-Z]*).*\s(\d+.\d+)\s([a-zA-Z]*).*\n'
-        r'LATENCY.*\[\'(.*)\', \'(.*)\'\].*\n'
-        r'PDR_UPPER:\s(\d+.\d+)\s([a-zA-Z]*).*\s(\d+.\d+)\s([a-zA-Z]*)'
+        r'NDR_LOWER:\s(\d+.\d+)\s.*\s(\d+.\d+)\s.*\n.*\n.*\n'
+        r'PDR_LOWER:\s(\d+.\d+)\s.*\s(\d+.\d+)\s.*\n.*\n.*\n'
+        r'Latency at 90% PDR:.*\[\'(.*)\', \'(.*)\'\].*\n'
+        r'Latency at 50% PDR:.*\[\'(.*)\', \'(.*)\'\].*\n'
+        r'Latency at 10% PDR:.*\[\'(.*)\', \'(.*)\'\].*\n'
     )
     # TODO: Remove when not needed
     REGEX_NDRPDR_LAT_BASE = re.compile(
@@ -373,31 +372,21 @@ class ExecutionChecker(ResultVisitor):
         """
 
         groups = re.search(self.REGEX_PERF_MSG_INFO, msg)
-        if not groups or groups.lastindex != 20:
+        if not groups or groups.lastindex != 10:
             return msg
 
         try:
             data = {
                 u"ndr_low": float(groups.group(1)),
-                u"ndr_low_unit": groups.group(2),
-                u"ndr_low_b": float(groups.group(3)),
-                u"ndr_low_b_unit": groups.group(4),
-                u"ndr_lat_1": groups.group(5),
-                u"ndr_lat_2": groups.group(6),
-                u"ndr_up": float(groups.group(7)),
-                u"ndr_up_unit": groups.group(8),
-                u"ndr_up_b": float(groups.group(9)),
-                u"ndr_up_b_unit": groups.group(10),
-                u"pdr_low": float(groups.group(11)),
-                u"pdr_low_unit": groups.group(12),
-                u"pdr_low_b": float(groups.group(13)),
-                u"pdr_low_b_unit": groups.group(14),
-                u"pdr_lat_1": groups.group(15),
-                u"pdr_lat_2": groups.group(16),
-                u"pdr_up": float(groups.group(17)),
-                u"pdr_up_unit": groups.group(18),
-                u"pdr_up_b": float(groups.group(19)),
-                u"pdr_up_b_unit": groups.group(20)
+                u"ndr_low_b": float(groups.group(2)),
+                u"pdr_low": float(groups.group(3)),
+                u"pdr_low_b": float(groups.group(4)),
+                u"pdr_lat_90_1": groups.group(5),
+                u"pdr_lat_90_2": groups.group(6),
+                u"pdr_lat_50_1": groups.group(7),
+                u"pdr_lat_50_2": groups.group(8),
+                u"pdr_lat_10_1": groups.group(9),
+                u"pdr_lat_10_2": groups.group(10),
             }
         except (AttributeError, IndexError, ValueError, KeyError):
             return msg
@@ -411,69 +400,59 @@ class ExecutionChecker(ResultVisitor):
                 robot framework.
             :type in_str_1: str
             :type in_str_2: str
-            :returns: Processed latency string or original string if a problem
+            :returns: Processed latency string or empty string if a problem
                 occurs.
             :rtype: tuple(str, str)
             """
             in_list_1 = in_str_1.split('/', 3)
-            if len(in_list_1) < 3:
-                return u"Not Measured.", u"Not Measured."
-
             in_list_2 = in_str_2.split('/', 3)
-            if len(in_list_2) < 3:
-                return u"Not Measured.", u"Not Measured."
 
-            hdr_lat_1 = u""
-            if len(in_list_1) == 4:
-                in_list_1[3] += u"=" * (len(in_list_1[3]) % 4)
-                try:
-                    hdr_lat_1 = hdrh.histogram.HdrHistogram.decode(in_list_1[3])
-                except hdrh.codec.HdrLengthException:
-                    pass
-            hdr_lat_2 = u""
-            if len(in_list_2) == 4:
-                in_list_2[3] += u"=" * (len(in_list_2[3]) % 4)
-                try:
-                    hdr_lat_2 = hdrh.histogram.HdrHistogram.decode(in_list_2[3])
-                except hdrh.codec.HdrLengthException:
-                    pass
+            if len(in_list_1) != 4 and len(in_list_2) != 4:
+                return u""
+
+            in_list_1[3] += u"=" * (len(in_list_1[3]) % 4)
+            try:
+                hdr_lat_1 = hdrh.histogram.HdrHistogram.decode(in_list_1[3])
+            except hdrh.codec.HdrLengthException:
+                return u""
+
+            in_list_2[3] += u"=" * (len(in_list_2[3]) % 4)
+            try:
+                hdr_lat_2 = hdrh.histogram.HdrHistogram.decode(in_list_2[3])
+            except hdrh.codec.HdrLengthException:
+                return u""
 
-            hdr_lat = u"Not Measured."
             if hdr_lat_1 and hdr_lat_2:
-                hdr_lat = (
-                    f"50%/90%/99%/99.9%, "
-                    f"{hdr_lat_1.get_value_at_percentile(50.0)}/"
-                    f"{hdr_lat_1.get_value_at_percentile(90.0)}/"
-                    f"{hdr_lat_1.get_value_at_percentile(99.0)}/"
-                    f"{hdr_lat_1.get_value_at_percentile(99.9)}, "
-                    f"{hdr_lat_2.get_value_at_percentile(50.0)}/"
-                    f"{hdr_lat_2.get_value_at_percentile(90.0)}/"
-                    f"{hdr_lat_2.get_value_at_percentile(99.0)}/"
-                    f"{hdr_lat_2.get_value_at_percentile(99.9)} "
-                    f"uSec."
+                return (
+                    f"{hdr_lat_1.get_value_at_percentile(50.0)} "
+                    f"{hdr_lat_1.get_value_at_percentile(90.0)} "
+                    f"{hdr_lat_1.get_value_at_percentile(99.0)} , "
+                    f"{hdr_lat_2.get_value_at_percentile(50.0)} "
+                    f"{hdr_lat_2.get_value_at_percentile(90.0)} "
+                    f"{hdr_lat_2.get_value_at_percentile(99.0)}"
                 )
 
-            return (
-                f"Min/Avg/Max, "
-                f"{in_list_1[0]}/{in_list_1[1]}/{in_list_1[2]}, "
-                f"{in_list_2[0]}/{in_list_2[1]}/{in_list_2[2]} uSec.",
-                hdr_lat
-            )
+            return u""
 
         try:
-            pdr_lat = _process_lat(data[u'pdr_lat_1'], data[u'pdr_lat_2'])
-            ndr_lat = _process_lat(data[u'ndr_lat_1'], data[u'ndr_lat_2'])
+            pdr_lat_10 = _process_lat(data[u'pdr_lat_10_1'],
+                                      data[u'pdr_lat_10_2'])
+            pdr_lat_50 = _process_lat(data[u'pdr_lat_50_1'],
+                                      data[u'pdr_lat_50_2'])
+            pdr_lat_90 = _process_lat(data[u'pdr_lat_90_1'],
+                                      data[u'pdr_lat_90_2'])
+            pdr_lat_10 = f"\n3. {pdr_lat_10}" if pdr_lat_10 else u""
+            pdr_lat_50 = f"\n4. {pdr_lat_50}" if pdr_lat_50 else u""
+            pdr_lat_90 = f"\n5. {pdr_lat_90}" if pdr_lat_90 else u""
+
             return (
-                f"NDR Throughput: {(data[u'ndr_low'] / 1e6):.2f} "
-                f"M{data[u'ndr_low_unit']}, "
-                f"{data[u'ndr_low_b']:.2f} {data[u'ndr_low_b_unit']}.\n"
-                f"One-Way Latency at NDR: {ndr_lat[0]}\n"
-                f"One-Way Latency at NDR by percentiles: {ndr_lat[1]}\n"
-                f"PDR Throughput: {(data[u'pdr_low'] / 1e6):.2f} "
-                f"M{data[u'pdr_low_unit']}, "
-                f"{data[u'pdr_low_b']:.2f} {data[u'pdr_low_b_unit']}.\n"
-                f"One-Way Latency at PDR: {pdr_lat[0]}\n"
-                f"One-Way Latency at PDR by percentiles: {pdr_lat[1]}"
+                u" |prein| "
+                f"1. {(data[u'ndr_low'] / 1e6):.2f} {data[u'ndr_low_b']:.2f}"
+                f"\n2. {(data[u'pdr_low'] / 1e6):.2f} {data[u'pdr_low_b']:.2f}"
+                f"{pdr_lat_10}"
+                f"{pdr_lat_50}"
+                f"{pdr_lat_90}"
+                u" |preout| "
             )
         except (AttributeError, IndexError, ValueError, KeyError):
             return msg
diff --git a/resources/tools/presentation/specification.yaml b/resources/tools/presentation/specification.yaml
index 41f1e0925a..83057b11ed 100644
--- a/resources/tools/presentation/specification.yaml
+++ b/resources/tools/presentation/specification.yaml
@@ -4097,9 +4097,9 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,PERF,VPP,3N,HSW]}/vpp_performance_results_3n_hsw"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
-  - title: "Status"
+  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
     data: "data msg"
   rows: "generated"
   data: "vpp-perf-results-3n-hsw"
@@ -4116,9 +4116,9 @@
 #  output-file-ext: ".csv"
 #  output-file: "{DIR[DTR,PERF,VPP,3N,SKX]}/vpp_performance_results_3n_skx"
 #  columns:
-#  - title: "Name"
+#  - title: "Test Name"
 #    data: "data name"
-#  - title: "Status"
+#  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
 #    data: "data msg"
 #  rows: "generated"
 #  data: "vpp-perf-results-3n-skx"
@@ -4135,9 +4135,9 @@
 #  output-file-ext: ".csv"
 #  output-file: "{DIR[DTR,PERF,VPP,2N,SKX]}/vpp_performance_results_2n_skx"
 #  columns:
-#  - title: "Name"
+#  - title: "Test Name"
 #    data: "data name"
-#  - title: "Status"
+#  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
 #    data: "data msg"
 #  rows: "generated"
 #  data: "vpp-perf-results-2n-skx"
@@ -4154,9 +4154,9 @@
 #  output-file-ext: ".csv"
 #  output-file: "{DIR[DTR,PERF,VPP,2N,CLX]}/vpp_performance_results_2n_clx"
 #  columns:
-#  - title: "Name"
+#  - title: "Test Name"
 #    data: "data name"
-#  - title: "Status"
+#  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
 #    data: "data msg"
 #  rows: "generated"
 #  data: "vpp-perf-results-2n-clx"
@@ -4173,9 +4173,9 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,PERF,VPP,3N,TSH]}/vpp_performance_results_3n_tsh"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
-  - title: "Status"
+  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
     data: "data msg"
   rows: "generated"
   data: "vpp-perf-results-3n-tsh"
@@ -4192,9 +4192,9 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,PERF,VPP,3N,DNV]}/vpp_performance_results_3n_dnv"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
-  - title: "Status"
+  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
     data: "data msg"
   rows: "generated"
   data: "vpp-perf-results-3n-dnv"
@@ -4211,9 +4211,9 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,PERF,VPP,2N,DNV]}/vpp_performance_results_2n_dnv"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
-  - title: "Status"
+  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
     data: "data msg"
   rows: "generated"
   data: "vpp-perf-results-2n-dnv"
@@ -4419,7 +4419,7 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,MRR,VPP,3N,HSW]}/vpp_mrr_results_3n_hsw"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
   - title: "Status"
     data: "data msg"
@@ -4438,7 +4438,7 @@
 #  output-file-ext: ".csv"
 #  output-file: "{DIR[DTR,MRR,VPP,3N,SKX]}/vpp_mrr_results_3n_skx"
 #  columns:
-#  - title: "Name"
+#  - title: "Test Name"
 #    data: "data name"
 #  - title: "Status"
 #    data: "data msg"
@@ -4457,7 +4457,7 @@
 #  output-file-ext: ".csv"
 #  output-file: "{DIR[DTR,MRR,VPP,2N,SKX]}/vpp_mrr_results_2n_skx"
 #  columns:
-#  - title: "Name"
+#  - title: "Test Name"
 #    data: "data name"
 #  - title: "Status"
 #    data: "data msg"
@@ -4476,7 +4476,7 @@
 #  output-file-ext: ".csv"
 #  output-file: "{DIR[DTR,MRR,VPP,2N,CLX]}/vpp_mrr_results_2n_clx"
 #  columns:
-#  - title: "Name"
+#  - title: "Test Name"
 #    data: "data name"
 #  - title: "Status"
 #    data: "data msg"
@@ -4495,7 +4495,7 @@
 #  output-file-ext: ".csv"
 #  output-file: "{DIR[DTR,MRR,VPP,3N,TSH]}/vpp_mrr_results_3n_tsh"
 #  columns:
-#  - title: "Name"
+#  - title: "Test Name"
 #    data: "data name"
 #  - title: "Status"
 #    data: "data msg"
@@ -4514,7 +4514,7 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,MRR,VPP,3N,DNV]}/vpp_mrr_results_3n_dnv"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
   - title: "Status"
     data: "data msg"
@@ -4533,7 +4533,7 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,MRR,VPP,2N,DNV]}/vpp_mrr_results_2n_dnv"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
   - title: "Status"
     data: "data msg"
@@ -4685,7 +4685,7 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,FUNC,VPP,DEVICE,UBUNTU]}/vpp_device_results_ubuntu"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
   - title: "Documentation"
     data: "data doc"
@@ -5106,9 +5106,9 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,PERF,DPDK,3N,HSW]}/dpdk_performance_results_3n_hsw"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
-  - title: "Status"
+  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
     data: "data msg"
   rows: "generated"
   data: "dpdk-perf-results-3n-hsw"
@@ -5125,9 +5125,9 @@
 #  output-file-ext: ".csv"
 #  output-file: "{DIR[DTR,PERF,DPDK,3N,SKX]}/dpdk_performance_results_3n_skx"
 #  columns:
-#  - title: "Name"
+#  - title: "Test Name"
 #    data: "data name"
-#  - title: "Status"
+#  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
 #    data: "data msg"
 #  rows: "generated"
 #  data: "dpdk-perf-results-3n-skx"
@@ -5144,9 +5144,9 @@
 #  output-file-ext: ".csv"
 #  output-file: "{DIR[DTR,PERF,DPDK,2N,SKX]}/dpdk_performance_results_2n_skx"
 #  columns:
-#  - title: "Name"
+#  - title: "Test Name"
 #    data: "data name"
-#  - title: "Status"
+#  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
 #    data: "data msg"
 #  rows: "generated"
 #  data: "dpdk-perf-results-2n-skx"
@@ -5163,9 +5163,9 @@
 #  output-file-ext: ".csv"
 #  output-file: "{DIR[DTR,PERF,DPDK,2N,CLX]}/dpdk_performance_results_2n_clx"
 #  columns:
-#  - title: "Name"
+#  - title: "Test Name"
 #    data: "data name"
-#  - title: "Status"
+#  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
 #    data: "data msg"
 #  rows: "generated"
 #  data: "dpdk-perf-results-2n-clx"
@@ -5182,9 +5182,9 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,PERF,DPDK,2N,DNV]}/dpdk_performance_results_2n_dnv"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
-  - title: "Status"
+  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
     data: "data msg"
   rows: "generated"
   data: "dpdk-perf-results-2n-dnv"
@@ -5201,9 +5201,9 @@
   output-file-ext: ".csv"
   output-file: "{DIR[DTR,PERF,DPDK,3N,DNV]}/dpdk_performance_results_3n_dnv"
   columns:
-  - title: "Name"
+  - title: "Test Name"
     data: "data name"
-  - title: "Status"
+  - title: " |prein| 1. Mpps Gbps (NDR Throughput) |br| 2. Mpps Gbps (PDR Throughput) |br| 3. P50 P90 P99 , P50 P90 P99 (10% PDR Uni-Dir Latency in uSec) |br| 4. P50 P90 P99 , P50 P90 P99 (50% PDR Uni-Dir Latency in uSec) |br| 5. P50 P90 P99 , P50 P90 P99 (90% PDR Uni-Dir Latency in uSec) |preout| "
     data: "data msg"
   rows: "generated"
   data: "dpdk-perf-results-3n-dnv"