diff options
| author |   Peter Mikus <pmikus@cisco.com> | 2018-07-10 06:10:41 +0000 |
|---|---|---|
| committer | Peter Mikus <pmikus@cisco.com> | 2018-07-13 09:11:04 +0000 |
| commit | ad71afc5baa8008bd5d4ea26f51a71eefe3fbe62 (patch) | |
| tree | 3b1c24ab540b5f57ee4b3592368191bc1f227cc7 | |
| parent | 338b195c0d7274b921eb18944d27ed1b4cb3739f (diff) | |
Refactor perf test cases
- Refactor Performance TCs due to changes in Hyperthreading and RXQ allocations.
- Simplify the structure of suite to avoid large refactors in future.
Change-Id: Ifb1b9719391f26745f075a900bd9fb39b6cb809c
Signed-off-by: Peter Mikus <pmikus@cisco.com>
312 files changed, 6697 insertions, 29633 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index ba6396f8fe..045a5d36ef 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -687,6 +687,10 @@ | | ... | routing for IPv6 with defined behaviour function and configure IPv6 | | ... | routes on both DUT nodes. | | ... +| | ... | *Note:* +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} @@ -694,9 +698,11 @@ | | ${sock1}= | Set Variable | memif-DUT1_VNF | | ${sock2}= | Set Variable | memif-DUT2_VNF | | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1} -| | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq} | ${rxq} +| | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq_count_int} +| | ... | ${rxq_count_int} | | Set up memif interfaces on DUT node | ${dut2} | ${sock2} | ${sock2} -| | ... | ${1} | dut2-memif-1-if1 | dut2-memif-1-if2 | ${rxq} | ${rxq} +| | ... | ${1} | dut2-memif-1-if1 | dut2-memif-1-if2 | ${rxq_count_int} +| | ... | ${rxq_count_int} | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Show Memif | ${nodes['${dut}']} @@ -2554,7 +2560,7 @@ | | Configure deterministic mode for NAT44 | | ... | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 -| Initialize L2 xconnect for '${nr}' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| Initialize L2 xconnect for '${nr}' memif pairs in 3-node circular topology | | [Documentation] | | ... | Create pairs of Memif interfaces on all defined VPP nodes. Cross | | ... | connect each Memif interface with one physical interface or virtual @@ -2567,9 +2573,13 @@ | | ... | Socket paths for Memif are defined in following format: | | ... | - /tmp/memif-DUT1_VNF${number}-${sid} | | ... +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... | | ... | *Example:* | | ... -| | ... | \| Initialize L2 xconnect for 1 Memif in 3-node circular topology \| +| | ... | \| Initialize L2 xconnect for 1 memif pairs in 3-node circular \ +| | ... | topology \| | | ... | | Set Interface State | ${dut1} | ${dut1_if1} | up | | Set Interface State | ${dut1} | ${dut1_if2} | up @@ -2581,7 +2591,7 @@ | | | ${prev_index}= | Evaluate | ${number}-1 | | | Set up memif interfaces on DUT node | ${dut1} | | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 -| | | ... | dut1-memif-${number}-if2 | ${rxq} | ${rxq} +| | | ... | dut1-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | ${dut1_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut1_if1} | | | ... | ${dut1-memif-${prev_index}-if2} | | | Configure L2XC | ${dut1} | ${dut1_xconnect_if1} @@ -2590,7 +2600,7 @@ | | | ${sock2}= | Set Variable | memif-DUT2_VNF | | | Set up memif interfaces on DUT node | ${dut2} | | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 -| | | ... | dut2-memif-${number}-if2 | ${rxq} | ${rxq} +| | | ... | dut2-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | ${dut2_xconnect_if1}= | Set Variable If | ${number}==1 | ${dut2_if1} | | | ... | ${dut2-memif-${prev_index}-if2} | | | Configure L2XC | ${dut2} | ${dut2_xconnect_if1} @@ -2602,7 +2612,7 @@ | | All Vpp Interfaces Ready Wait | ${nodes} | | Show Memif on all DUTs | ${nodes} -| Initialize L2 Bridge Domain for '${nr}' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| Initialize L2 Bridge Domain for '${nr}' memif pairs in 3-node circular topology | | [Documentation] | | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each | | ... | Memif interface to separate L2 bridge domain with one physical or @@ -2630,7 +2640,7 @@ | | | ${sock2}= | Set Variable | memif-DUT1_VNF | | | Set up memif interfaces on DUT node | ${dut1} | | | ... | ${sock1} | ${sock2} | ${number} | dut1-memif-${number}-if1 -| | | ... | dut1-memif-${number}-if2 | ${rxq} | ${rxq} +| | | ... | dut1-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | ${bd_id2}= | Evaluate | ${number}+1 | | | Add interface to bridge domain | ${dut1} | | | ... | ${dut1-memif-${number}-if1} | ${number} @@ -2640,7 +2650,7 @@ | | | ${sock2}= | Set Variable | memif-DUT2_VNF | | | Set up memif interfaces on DUT node | ${dut2} | | | ... | ${sock1} | ${sock2} | ${number} | dut2-memif-${number}-if1 -| | | ... | dut2-memif-${number}-if2 | ${rxq} | ${rxq} +| | | ... | dut2-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} | | | Add interface to bridge domain | ${dut2} | | | ... | ${dut2-memif-${number}-if1} | ${number} | | | Add interface to bridge domain | ${dut2} @@ -2654,26 +2664,30 @@ | | ... | connect Memif interface with one physical interface. | | ... | | ... | *Arguments:* -| | ... | - ${rxq} - Number of Memif RX queues. Type: integer | | ... | - ${number} - Memif ID. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: | | ... | - /tmp/memif-DUT1_VNF${number}-${sid} | | ... +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... | | ... | *Example:* | | ... | | ... | \| Initialize L2 xconnect for single memif in 3-node circular \ -| | ... | topology \| 1 \| 1 \| +| | ... | topology \| 1 \| | | ... -| | [Arguments] | ${rxq}=${1} | ${number}=${1} +| | [Arguments] | ${number}=${1} | | ${sock}= | Set Variable | memif-DUT1_VNF | | Set up single memif interface on DUT node | ${dut1} | ${sock} -| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq} | ${rxq} +| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} | | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1-memif-${number}-if1} | | ${sock}= | Set Variable | memif-DUT2_VNF | | Set up single memif interface on DUT node | ${dut2} | ${sock} -| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq} | ${rxq} +| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} | | Configure L2XC | ${dut2} | ${dut2_if2} | ${dut2-memif-${number}-if1} | | All Vpp Interfaces Ready Wait | ${nodes} | | Show Memif on all DUTs | ${nodes} @@ -2684,28 +2698,32 @@ | | ... | interface to separate L2 bridge domain with one physical interface. | | ... | | ... | *Arguments:* -| | ... | - ${rxq} - Number of Memif RX queues. Type: integer | | ... | - ${number} - Memif ID. Type: integer | | ... | | ... | *Note:* | | ... | Socket paths for Memif are defined in following format: | | ... | - /tmp/memif-DUT1_VNF${number}-${sid} | | ... +| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads +| | ... | and rxqueues to all DUTs +| | ... | | ... | *Example:* | | ... | | ... | \| Initialize L2 Bridge Domain for single memif in 3-node circular \ -| | ... | topology \| 1 \| 1 \| +| | ... | topology \| 1 \| | | ... -| | [Arguments] | ${rxq}=${1} | ${number}=${1} +| | [Arguments] | ${number}=${1} | | ${sock}= | Set Variable | memif-DUT1_VNF | | Set up single memif interface on DUT node | ${dut1} | ${sock} -| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq} | ${rxq} +| | ... | ${number} | dut1-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${number} | | Add interface to bridge domain | ${dut1} | ${dut1-memif-${number}-if1} | | ... | ${number} | | ${sock}= | Set Variable | memif-DUT2_VNF | | Set up single memif interface on DUT node | ${dut2} | ${sock} -| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq} | ${rxq} +| | ... | ${number} | dut2-memif-${number}-if1 | ${rxq_count_int} +| | ... | ${rxq_count_int} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${number} | | Add interface to bridge domain | ${dut2} | ${dut2-memif-${number}-if1} | | ... | ${number} diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot index b3e10dc2d3..d0bd929386 100644 --- a/resources/libraries/robot/shared/default.robot +++ b/resources/libraries/robot/shared/default.robot @@ -141,17 +141,17 @@ | | ... | mTnC, where m=logical_core_count and n=physical_core_count. | | ... | | ... | *Arguments:* -| | ... | - cpu_cnt - Number of physical cores to use. Type: integer +| | ... | - phy_cores - Number of physical cores to use. Type: integer | | ... | - rx_queues - Number of RX queues. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Add worker threads and rxqueues to all DUTs \| ${1} \| ${1} \| | | ... -| | [Arguments] | ${cpu_cnt} | ${rx_queues} +| | [Arguments] | ${phy_cores} | ${rx_queues}=${None} | | ... -| | ${cpu_count_int} | Convert to Integer | ${cpu_cnt} -| | ${thr_count_int} | Convert to Integer | ${cpu_cnt} +| | ${cpu_count_int} | Convert to Integer | ${phy_cores} +| | ${thr_count_int} | Convert to Integer | ${phy_cores} | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | ${numa}= | Get interfaces numa node | ${nodes['${dut}']} @@ -161,23 +161,24 @@ | | | ... | skip_cnt=${1} | cpu_cnt=${1} | | | ${cpu_wt}= | Cpu list per node str | ${nodes['${dut}']} | ${numa} | | | ... | skip_cnt=${2} | cpu_cnt=${cpu_count_int} | smt_used=${smt_used} +| | | ${thr_count_int}= | Run keyword if | ${smt_used} +| | | ... | Evaluate | int(${cpu_count_int}*2) +| | | ... | ELSE | Set variable | ${thr_count_int} +| | | ${rxq_count_int}= | Run keyword if | ${rx_queues} +| | | ... | Set variable | ${rx_queues} +| | | ... | ELSE | Evaluate | int(${thr_count_int}/2) +| | | ${rxq_count_int}= | Run keyword if | ${rxq_count_int} == 0 +| | | ... | Set variable | ${1} +| | | ... | ELSE | Set variable | ${rxq_count_int} | | | Run keyword | ${dut}.Add CPU Main Core | ${cpu_main} | | | Run keyword | ${dut}.Add CPU Corelist Workers | ${cpu_wt} -| | | Run keyword | ${dut}.Add DPDK Dev Default RXQ | ${rx_queues} -| | | ${thr_count_int}= | Run keyword if | ${smt_used} | -| | | ... | Evaluate | int(${cpu_count_int}*2) | ELSE | Set variable -| | | ... | ${thr_count_int} +| | | Run keyword | ${dut}.Add DPDK Dev Default RXQ | ${rxq_count_int} | | | Run keyword if | ${thr_count_int} > 1 | | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD | | | Set Tags | ${thr_count_int}T${cpu_count_int}C - -# FIXME: Remove the keyword after refactor of suites. Currently kept for -# backward compatibility only. -| Add '${m}' worker threads and '${n}' rxqueues in 3-node single-link circular topology -| | [Documentation] | Setup M worker threads and N rxqueues in vpp startup\ -| | ... | configuration on all DUTs in 3-node single-link topology. -| | ... -| | Add worker threads and rxqueues to all DUTs | ${m} | ${n} +| | Set Test Variable | ${smt_used} +| | Set Test Variable | ${thr_count_int} +| | Set Test Variable | ${rxq_count_int} | Add no multi seg to all DUTs | | [Documentation] | Add No Multi Seg to VPP startup configuration to all DUTs. @@ -257,7 +258,11 @@ | | [Arguments] | ${count} | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} -| | | Run keyword | ${dut}.Add DPDK Cryptodev | ${count} +| | | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']} +| | | ${thr_count_int}= | Run keyword if | ${smt_used} +| | | ... | Evaluate | int(${count}*2) +| | | ... | ELSE | Set variable | ${count} +| | | Run keyword | ${dut}.Add DPDK Cryptodev | ${thr_count_int} | Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology | | [Documentation] | Add required number of SW crypto devices of given type @@ -274,12 +279,20 @@ | | ... | topology \| aesni-mb \| ${2} \| | | ... | | [Arguments] | ${sw_pmd_type} | ${count} +| | ${smt_used}= | Is SMT enabled | ${nodes['DUT1']['cpuinfo']} +| | ${thr_count_int}= | Run keyword if | ${smt_used} +| | ... | Evaluate | int(${count}*2) +| | ... | ELSE | Set variable | ${count} | | ${socket_id}= | Get Interface Numa Node | ${nodes['DUT1']} | ${dut1_if2} | | Run keyword | DUT1.Add DPDK SW Cryptodev | ${sw_pmd_type} | ${socket_id} -| | ... | ${count} +| | ... | ${thr_count_int} +| | ${smt_used}= | Is SMT enabled | ${nodes['DUT2']['cpuinfo']} +| | ${thr_count_int}= | Run keyword if | ${smt_used} +| | ... | Evaluate | int(${count}*2) +| | ... | ELSE | Set variable | ${count} | | ${socket_id}= | Get Interface Numa Node | ${nodes['DUT2']} | ${dut2_if1} | | Run keyword | DUT2.Add DPDK SW Cryptodev | ${sw_pmd_type} | ${socket_id} -| | ... | ${count} +| | ... | ${thr_count_int} | Apply startup configuration on all VPP DUTs | | [Documentation] | Write startup configuration and restart VPP on all DUTs. diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot index 3d8236a483..1a8162cdb0 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot @@ -31,7 +31,9 @@ | ... | Test Teardown | Tear down performance mrr test | ... -| Documentation | *Raw results L2BD test cases* +| Test Template | Local template +| ... +| Documentation | *Raw results L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. @@ -67,161 +69,79 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for l2bdbasemaclrn-eth-2memif-1lxc +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 Bridge Domain for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** -| tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... +| tc01-64B-1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | 64B | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} -| tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... +| tc02-1518B-1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | 1518B | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} -| tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... +| tc03-9000B-1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | 9000B | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} -| tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... +| tc04-IMIX-1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | IMIX | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} -| tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... +| tc05-64B-2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | 64B | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} -| tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... +| tc06-1518B-2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | 1518B | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} -| tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... +| tc07-9000B-2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | 9000B | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} -| tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... +| tc08-IMIX-2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | IMIX | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} -| tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... +| tc09-64B-4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | 64B | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} -| tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... +| tc10-1518B-4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | 1518B | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} -| tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... +| tc11-9000B-4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | 9000B | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} -| tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... +| tc12-IMIX-4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr | | [Tags] | IMIX | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc.robot index f7488d5679..5e99e27f8e 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrpdrdisc.robot @@ -32,6 +32,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -75,8 +77,25 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with Memif -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Set Variable If @@ -85,11 +104,11 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI Devices To DUTs In 3-node Single Link Topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | Add PCI devices to all DUTs | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs -| | Initialize L2 Bridge Domain for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology | | Run Keyword If | '${search_type}' == 'NDR' | | ... | Find NDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} @@ -102,137 +121,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR | tc05-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc06-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR | tc09-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=NDR | tc10-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=PDR | tc11-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${2} | search_type=NDR | tc12-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with Memif -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${2} | search_type=PDR diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot index 164af1a001..8eb1a7bbe2 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-mrr.robot @@ -32,7 +32,7 @@ | ... | Test Teardown | Tear down performance mrr test | ... -| Test Template | Check RR for l2xcbase-eth-1memif-1dcr +| Test Template | Local template | ... | Documentation | *Raw results L2XC test cases* | ... @@ -73,148 +73,78 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for l2xcbase-eth-1memif-1dcr +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add single PCI device to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect for single memif in 3-node circular topology -| | ... | ${rxq} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot index 91350e434f..5cece02e25 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot @@ -33,7 +33,7 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... -| Test Template | Find NDRPDR for l2xcbase-eth-1memif-1dcr +| Test Template | Local template | ... | Documentation | *RFC2544: Pkt throughput L2XC test cases* | ... @@ -80,15 +80,25 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Find NDRPDR for l2xcbase-eth-1memif-1dcr +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Find ${search_type} for ${framesize} frames using binary search\ -| | ... | start at 10GE linerate, step 50kpps. +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} | ${search_type} -| | ... | ${min_rate}=${50000} | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -96,13 +106,12 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add single PCI device to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect for single memif in 3-node circular topology -| | ... | ${rxq} | | Then Run Keyword If | '${search_type}' == 'NDR' | | ... | Find NDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} @@ -115,247 +124,97 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | framesize=${64} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC -| | framesize=${64} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | framesize=${1518} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc04-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC -| | framesize=${1518} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc05-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 9000B | 1C | NDRDISC -| | framesize=${9000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${1} | search_type=NDR | tc06-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 1C | PDRDISC -| | framesize=${9000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${1} | search_type=PDR | tc07-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR | tc08-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR | tc09-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | framesize=${64} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc10-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC -| | framesize=${64} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR | tc11-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | framesize=${1518} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${2} | search_type=NDR | tc12-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC -| | framesize=${1518} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${2} | search_type=PDR | tc13-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 9000B | 2C | NDRDISC -| | framesize=${9000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${2} | search_type=NDR | tc14-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 2C | PDRDISC -| | framesize=${9000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${2} | search_type=PDR | tc15-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=NDR | tc16-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=PDR | tc17-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | framesize=${64} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${64} | phy_cores=${4} | search_type=NDR | tc18-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC -| | framesize=${64} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${64} | phy_cores=${4} | search_type=PDR | tc19-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | framesize=${1518} | wt=4 | rxq=2| search_type=NDR +| | framesize=${1518} | phy_cores=${4} | search_type=NDR | tc20-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC -| | framesize=${1518} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${1518} | phy_cores=${4} | search_type=PDR | tc21-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 9000B | 4C | NDRDISC -| | framesize=${9000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${9000} | phy_cores=${4} | search_type=NDR | tc22-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 4C | PDRDISC -| | framesize=${9000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${9000} | phy_cores=${4} | search_type=PDR | tc23-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${4} | search_type=NDR | tc24-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${4} | search_type=PDR diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot index edb5112c55..1febc9a006 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1dcr-mrr.robot @@ -31,7 +31,9 @@ | ... | Test Teardown | Tear down performance mrr test | ... -| Documentation | *Raw results L2XC test cases* +| Test Template | Local template +| ... +| Documentation | *Raw results L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. @@ -67,161 +69,79 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for l2xcbase-eth-2memif-1dcr +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1drc-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1drc-ndrpdrdisc.robot index cd1adabf84..044f09d20a 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1drc-ndrpdrdisc.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1drc-ndrpdrdisc.robot @@ -32,6 +32,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -76,7 +78,24 @@ *** Keywords *** | L2 Cross Connect over Memif Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Set Variable If @@ -85,11 +104,11 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI Devices To DUTs In 3-node Single Link Topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | Add PCI devices to all DUTs | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs -| | Initialize L2 xconnect for '${container_count}' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | Initialize L2 xconnect for '${container_count}' memif pairs in 3-node circular topology | | Run Keyword If | '${search_type}' == 'NDR' | | ... | Find NDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} @@ -102,137 +121,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-IMIX-1t1c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR | tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR | tc05-1518B-1t1c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc06-1518B-1t1c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR | tc09-IMIX-2t2c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=NDR | tc10-IMIX-2t2c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=PDR | tc11-1518B-2t2c-eth-l2xcbase-eth-2memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${2} | search_type=NDR | tc12-1518B-2t2c-eth-l2xcbase-eth-2memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${2} | search_type=PDR diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot index 7d4c5f73db..b01acfcffd 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-mrr.robot @@ -31,7 +31,9 @@ | ... | Test Teardown | Tear down performance mrr test | ... -| Documentation | *Raw results L2XC test cases* +| Test Template | Local template +| ... +| Documentation | *Raw results L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. @@ -66,161 +68,79 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for l2xcbase-eth-2memif-1lxc +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot index 046f5a8514..021c61ba22 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x520-eth-l2xcbase-eth-2memif-1lxc-ndrpdrdisc.robot @@ -32,6 +32,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -75,7 +77,24 @@ *** Keywords *** | L2 Cross Connect over Memif Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} +| | [Documentation] +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Set Variable If @@ -84,11 +103,11 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology -| | Add PCI Devices To DUTs In 3-node Single Link Topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} +| | Add PCI devices to all DUTs | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs -| | Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | Initialize L2 xconnect for '1' memif pairs in 3-node circular topology | | Run Keyword If | '${search_type}' == 'NDR' | | ... | Find NDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} @@ -101,137 +120,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR | tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR | tc05-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc06-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR | tc09-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=NDR | tc10-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=PDR | tc11-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${2} | search_type=NDR | tc12-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC -| | [Template] | L2 Cross Connect over Memif Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${2} | search_type=PDR diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot index 0c12a5cc4a..f486d79126 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot @@ -31,7 +31,9 @@ | ... | Test Teardown | Tear down performance mrr test | ... -| Documentation | *Raw results L2BD test cases* +| Test Template | Local template +| ... +| Documentation | *Raw results L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. @@ -67,161 +69,79 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for l2bdbasemaclrn-eth-2memif-1lxc +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 Bridge Domain for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot index f2559b6f71..0587659fc6 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-mrr.robot @@ -31,7 +31,7 @@ | ... | Test Teardown | Tear down performance mrr test | ... -| Test Template | Check RR for l2xcbase-eth-1memif-1dcr +| Test Template | Local template | ... | Documentation | *Raw results L2XC test cases* | ... @@ -72,148 +72,78 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for l2xcbase-eth-1memif-1dcr +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add single PCI device to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect for single memif in 3-node circular topology -| | ... | ${rxq} | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot index 386260c4cd..d62e6774ca 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-1memif-1dcr-ndrpdrdisc.robot @@ -32,7 +32,7 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... -| Test Template | Find NDRPDR for l2xcbase-eth-1memif-1dcr +| Test Template | Local template | ... | Documentation | *Raw results L2XC test cases* | ... @@ -79,15 +79,25 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Find NDRPDR for l2xcbase-eth-1memif-1dcr +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Find ${search_type} for ${framesize} frames using binary search\ -| | ... | start at 10GE linerate, step 50kpps. +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} | ${search_type} -| | ... | ${min_rate}=${50000} | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -95,13 +105,12 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add single PCI device to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect for single memif in 3-node circular topology -| | ... | ${rxq} | | Then Run Keyword If | '${search_type}' == 'NDR' | | ... | Find NDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile} @@ -114,247 +123,97 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | framesize=${64} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC -| | framesize=${64} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | framesize=${1518} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc04-1518B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC -| | framesize=${1518} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc05-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 9000B | 1C | NDRDISC -| | framesize=${9000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${1} | search_type=NDR | tc06-9000B-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 1C | PDRDISC -| | framesize=${9000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${1} | search_type=PDR | tc07-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR | tc08-IMIX-1t1c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR | tc09-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | framesize=${64} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc10-64B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC -| | framesize=${64} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR | tc11-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | framesize=${1518} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${2} | search_type=NDR | tc12-1518B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC -| | framesize=${1518} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${2} | search_type=PDR | tc13-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 9000B | 2C | NDRDISC -| | framesize=${9000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${2} | search_type=NDR | tc14-9000B-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 2C | PDRDISC -| | framesize=${9000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${2} | search_type=PDR | tc15-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=NDR | tc16-IMIX-2t2c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${2} | search_type=PDR | tc17-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | framesize=${64} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${64} | phy_cores=${4} | search_type=NDR | tc18-64B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC -| | framesize=${64} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${64} | phy_cores=${4} | search_type=PDR | tc19-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | framesize=${1518} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${1518} | phy_cores=${4} | search_type=NDR | tc20-1518B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC -| | framesize=${1518} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${1518} | phy_cores=${4} | search_type=PDR | tc21-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 9000B | 4C | NDRDISC -| | framesize=${9000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${9000} | phy_cores=${4} | search_type=NDR | tc22-9000B-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 4C | PDRDISC -| | framesize=${9000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${9000} | phy_cores=${4} | search_type=PDR | tc23-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${4} | search_type=NDR | tc24-IMIX-4t4c-eth-l2xcbase-eth-1memif-1dcr-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${4} | search_type=PDR diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot index 2f32cd277c..2a0a96be4c 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1dcr-mrr.robot @@ -31,7 +31,9 @@ | ... | Test Teardown | Tear down performance mrr test | ... -| Documentation | *Raw results L2XC test cases* +| Test Template | Local template +| ... +| Documentation | *Raw results L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. @@ -67,161 +69,79 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for l2xcbase-eth-2memif-1dcr +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-2memif-1dcr-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1dcr -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot index 6df3b65566..34340db0e8 100644 --- a/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/10ge2p1x710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot @@ -31,7 +31,9 @@ | ... | Test Teardown | Tear down performance mrr test | ... -| Documentation | *Raw results L2XC test cases* +| Test Template | Local template +| ... +| Documentation | *Raw results L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. @@ -66,161 +68,79 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for l2xcbase-eth-2memif-1lxc +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot index 256dedcd7e..c4a4b2edd0 100644 --- a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr.robot @@ -31,7 +31,9 @@ | ... | Test Teardown | Tear down performance mrr test | ... -| Documentation | *Raw results L2BD test cases* +| Test Template | Local template +| ... +| Documentation | *Raw results L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. @@ -69,163 +71,81 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for l2bdbasemaclrn-eth-2memif-1lxc +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} | | ${max_rate}= | Set Variable If | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 Bridge Domain for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | And Initialize L2 Bridge Domain for '1' memif pairs in 3-node circular topology | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | [Template] | Check RR for l2bdbasemaclrn-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot index 42a5639097..df9568636b 100644 --- a/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot +++ b/tests/vpp/perf/container_memif/40ge2p1xl710-eth-l2xcbase-eth-2memif-1lxc-mrr.robot @@ -31,6 +31,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -68,163 +70,81 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for l2xcbase-eth-2memif-1lxc +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} | | ${max_rate}= | Set Variable If | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs -| | And Initialize L2 xconnect for '1' memif pairs and '${rxq}' rxqueues in 3-node circular topology +| | And Initialize L2 xconnect for '1' memif pairs in 3-node circular topology | | Then Traffic should pass with maximum rate | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile} *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-2memif-1lxc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | [Template] | Check RR for l2xcbase-eth-2memif-1lxc -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot index 3386ff400d..54bd64b423 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr.robot @@ -23,8 +23,11 @@ | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test +| ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -66,16 +69,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Check RR for IPv4 routing with IPSec HW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} @@ -85,11 +93,11 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead} < ${1522} | | ... | Add no multi seg to all DUTs -| | And Add cryptodev to all DUTs | ${${wt}} +| | And Add cryptodev to all DUTs | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -105,106 +113,37 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=1 | rxq=1 - -# TODO: Add check to make test fail if rx=0. -# TODO: Add 9000B test cases when they start passing. +| | framesize=${1518} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot index a2b7e98397..fba7baf651 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -73,16 +75,25 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Discover NDR or PDR for IPv4 routing with IPSec HW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure NDR or PDR for ${framesize} by bisecting between\ -| | ... | ${min_rate} and computed max rate, using trial loss rate measurements. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -96,10 +107,11 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Add no multi seg to all DUTs -| | And Add cryptodev to all DUTs | ${${wt}} +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead_gcm} < ${1522} +| | ... | Add no multi seg to all DUTs +| | And Add cryptodev to all DUTs | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -122,99 +134,33 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec HW cryptodev -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec HW cryptodev -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-1518B-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec HW cryptodev -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc04-1518B-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec HW cryptodev -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc05-IMIX-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec HW cryptodev -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR | tc06-IMIX-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec HW cryptodev -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec HW cryptodev -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec HW cryptodev -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot index 3525bb372e..7f6218ea12 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr.robot @@ -23,8 +23,11 @@ | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test +| ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -66,16 +69,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Check RR for IPv4 routing with IPSec HW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} @@ -85,11 +93,11 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead} < ${1522} | | ... | Add no multi seg to all DUTs -| | And Add cryptodev to all DUTs | ${${wt}} +| | And Add cryptodev to all DUTs | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -105,106 +113,37 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=1 | rxq=1 - -# TODO: Add check to make test fail if rx=0. -# TODO: Add 9000B test cases when they start passing. +| | framesize=${1518} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot index 1e52f8c663..221f5b8b54 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot @@ -82,7 +82,6 @@ | | ... | | [Tags] | 64B | 1C | NDRDISC | | ... -| | # FIXME: Move repeated lines into a keyword. | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Set Variable | ${s_18.75Mpps} @@ -91,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -126,7 +125,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -162,7 +161,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -196,7 +195,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -233,7 +232,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -269,7 +268,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -304,7 +303,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} @@ -339,7 +338,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot index 0498effbeb..0733a43b8c 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot @@ -82,7 +82,6 @@ | | ... | | [Tags] | 64B | 1C | NDRDISC | | ... -| | # FIXME: Move repeated lines into a keyword. | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Set Variable | ${s_18.75Mpps} @@ -91,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -131,7 +130,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -173,7 +172,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -213,7 +212,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -256,7 +255,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -298,7 +297,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -338,7 +337,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} @@ -378,7 +377,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot index cf0342973a..2df4bd7dad 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot @@ -82,7 +82,6 @@ | | ... | | [Tags] | 64B | 1C | NDRDISC | | ... -| | # FIXME: Move repeated lines into a keyword. | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Set Variable | ${s_18.75Mpps} @@ -91,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -131,7 +130,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -172,7 +171,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -211,7 +210,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -253,7 +252,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -294,7 +293,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -334,7 +333,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} @@ -374,7 +373,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot index 521df05adf..6a6ce849ea 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr.robot @@ -23,8 +23,11 @@ | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test +| ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -67,16 +70,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Check RR for IPv4 routing with IPSec SW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} @@ -86,12 +94,12 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${${wt}} +| | ... | aesni_gcm | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -107,106 +115,36 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${1518} | wt=1 | rxq=1 - -# TODO: Add check to make test fail if rx=0. -# TODO: Add 9000B test cases when they start passing. +| | framesize=${1518} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdrdisc.robot index a588aa2d24..78c3881077 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -74,16 +76,24 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure NDR or PDR for ${framesize} by bisecting between\ -| | ... | ${min_rate} and computed max rate, using trial loss rate measurements. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} -| | ... -| | # Test Variables required for test teardown +| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -97,11 +107,12 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Add no multi seg to all DUTs +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead_gcm} < ${1522} +| | ... | Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${${wt}} +| | ... | aesni_gcm | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -124,99 +135,33 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-1518B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc04-1518B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc05-IMIX-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR | tc06-IMIX-1t1c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-ethip4ipsecbasetnlsw-ip4base-int-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot index 9a9f465b96..22a736b3b2 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr.robot @@ -23,8 +23,11 @@ | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test +| ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -67,16 +70,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Check RR for IPv4 routing with IPSec SW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} @@ -86,12 +94,12 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead} < ${1522} | | ... | Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${${wt}} +| | ... | aesni_mb | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -107,106 +115,37 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${1518} | wt=1 | rxq=1 - -# TODO: Add check to make test fail if rx=0. -# TODO: Add 9000B test cases when they start passing. +| | framesize=${1518} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec SW cryptodev -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdrdisc.robot index 150aa333b8..b380afc4b1 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -74,16 +76,25 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure NDR or PDR for ${framesize} by bisecting between\ -| | ... | ${min_rate} and computed max rate, using trial loss rate measurements. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -97,11 +108,12 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Add no multi seg to all DUTs +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead_gcm} < ${1522} +| | ... | Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${${wt}} +| | ... | aesni_mb | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -124,99 +136,33 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-1518B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc04-1518B-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc05-IMIX-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR | tc06-IMIX-1t1c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 2 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-ethip4ipsecbasetnlsw-ip4base-int-cbc-sha1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 2 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdrdisc.robot index 7276e2e959..74669e74c2 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -74,16 +76,25 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure NDR or PDR for ${framesize} by bisecting between\ -| | ... | ${min_rate} and computed max rate, using trial loss rate measurements. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -97,11 +108,12 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Add no multi seg to all DUTs +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead_gcm} < ${1522} +| | ... | Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_gcm | ${${wt}} +| | ... | aesni_gcm | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -129,99 +141,33 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-1518B-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc04-1518B-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc05-IMIX-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=NDR | tc06-IMIX-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | framesize=IMIX_v4_1 | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-ethip4ipsecbasetnlsw-ip4base-tnl-aes-gcm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel AES GCM in each direction, configured\ -| | ... | with 2 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot index 2447fbf992..f8d695323f 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -74,16 +76,25 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure NDR or PDR for ${framesize} by bisecting between\ -| | ... | ${min_rate} and computed max rate, using trial loss rate measurements. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Find ${search_type} for ${framesize}B frames using binary search\ +| | ... | start at linerate, step ${min_rate}pps. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - search_type - NDR or PDR. Type: string +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... | - min_rate - Min rate for binary search, default value: ${50000}. +| | ... | Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -97,11 +108,12 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Add no multi seg to all DUTs +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead_gcm} < ${1522} +| | ... | Add no multi seg to all DUTs | | And Add DPDK SW cryptodev on DUTs in 3-node single-link circular topology -| | ... | aesni_mb | ${${wt}} +| | ... | aesni_mb | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -129,99 +141,33 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 2 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames\ -| | ... | using binary search start at 40GE linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4ipsecbasetnlsw-ip4base-tnl-cbc-sha1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUTs run 1 IPsec tunnel CBC-SHA1 in each direction, configured\ -| | ... | with 2 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 40GE\ -| | ... | linerate, step 50kpps and loss tolerance of 0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with IPSec SW cryptodev -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot index 9bdb1c586c..d671121c4a 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr.robot @@ -23,8 +23,11 @@ | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test +| ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -66,16 +69,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Check RR for IPv4 routing with IPSec HW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPSec tunneling AES GCM config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} @@ -85,11 +93,11 @@ | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead} < ${1522} | | ... | Add no multi seg to all DUTs -| | And Add cryptodev to all DUTs | ${${wt}} +| | And Add cryptodev to all DUTs | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -105,106 +113,37 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ -| | ... | configured with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ -| | ... | configured with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=1 | rxq=1 - -# TODO: Add check to make test fail if rx=0. -# TODO: Add 9000B test cases when they start passing. +| | framesize=${1518} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ -| | ... | configured with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ -| | ... | configured with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ -| | ... | configured with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ -| | ... | configured with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ -| | ... | configured with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ -| | ... | configured with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels AES GCM in each direction,\ -| | ... | configured with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot index 5488e9bb11..e3455578e2 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot @@ -82,7 +82,6 @@ | | ... | | [Tags] | 64B | 1C | NDRDISC | | ... -| | # FIXME: Move repeated lines into a keyword. | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Set Variable | ${s_18.75Mpps} @@ -91,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -126,7 +125,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -163,7 +162,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -198,7 +197,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -236,7 +235,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -273,7 +272,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -308,7 +307,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} @@ -343,7 +342,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot index f68e27d66b..3561b9a96d 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr.robot @@ -23,8 +23,11 @@ | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test +| ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 IPsec tunnel mode performance test suite.* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -66,16 +69,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels} *** Keywords *** -| Check RR for IPv4 routing with IPSec HW cryptodev +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPSec tunneling CBC-SHA1 config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} @@ -85,11 +93,11 @@ | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs -| | And Run Keyword If | ${get_framesize} < ${1522} +| | And Run Keyword If | ${get_framesize} + ${ipsec_overhead} < ${1522} | | ... | Add no multi seg to all DUTs -| | And Add cryptodev to all DUTs | ${${wt}} +| | And Add cryptodev to all DUTs | ${${phy_cores}} | | And Add DPDK dev default RXD to all DUTs | 2048 | | And Add DPDK dev default TXD to all DUTs | 2048 | | And Apply startup configuration on all VPP DUTs @@ -105,106 +113,37 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction,\ -| | ... | configured with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction,\ -| | ... | configured with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=1 | rxq=1 - -# TODO: Add check to make test fail if rx=0. -# TODO: Add 9000B test cases when they start passing. +| | framesize=${1518} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction,\ -| | ... | configured with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction,\ -| | ... | configured with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction,\ -| | ... | configured with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction,\ -| | ... | configured with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction,\ -| | ... | configured with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction,\ -| | ... | configured with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-mrr -| | [Documentation] -| | ... | [Cfg] DUTs run 1000 IPsec tunnels CBC-SHA1 in each direction,\ -| | ... | configured with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with IPSec HW cryptodev -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot index 312c9c5e84..9a3048cd67 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot @@ -82,7 +82,6 @@ | | ... | | [Tags] | 64B | 1C | NDRDISC | | ... -| | # FIXME: Move repeated lines into a keyword. | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Set Variable | ${s_18.75Mpps} @@ -91,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -126,7 +125,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -162,7 +161,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -196,7 +195,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -233,7 +232,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -269,7 +268,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -304,7 +303,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} @@ -339,7 +338,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot index 473f85c39e..002228820f 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot @@ -82,7 +82,6 @@ | | ... | | [Tags] | 64B | 1C | NDRDISC | | ... -| | # FIXME: Move repeated lines into a keyword. | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Set Variable | ${s_18.75Mpps} @@ -91,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -131,7 +130,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -173,7 +172,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -213,7 +212,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -256,7 +255,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -298,7 +297,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -338,7 +337,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} @@ -378,7 +377,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES GCM 128 | | ${auth_alg}= | Integ Alg AES GCM 128 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot index 476bf83165..1cf1f866fb 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot @@ -82,7 +82,6 @@ | | ... | | [Tags] | 64B | 1C | NDRDISC | | ... -| | # FIXME: Move repeated lines into a keyword. | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Set Variable | ${s_18.75Mpps} @@ -91,7 +90,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -131,7 +130,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -172,7 +171,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -211,7 +210,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -253,7 +252,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -294,7 +293,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -334,7 +333,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} @@ -374,7 +373,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} diff --git a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot index e9c29350a5..5bb5fe3ba2 100644 --- a/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot +++ b/tests/vpp/perf/crypto/40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot @@ -81,7 +81,6 @@ | | ... | | [Tags] | 64B | 1C | NDRDISC | | ... -| | # FIXME: Move repeated lines into a keyword. | | ${framesize}= | Set Variable | ${64} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Set Variable | ${s_18.75Mpps} @@ -90,7 +89,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -122,7 +121,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${1} @@ -155,7 +154,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -186,7 +185,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -219,7 +218,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -251,7 +250,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add cryptodev to all DUTs | ${1} | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -283,7 +282,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} @@ -315,7 +314,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${2} @@ -348,7 +347,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${4} @@ -380,7 +379,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${encr_alg}= | Crypto Alg AES CBC 128 | | ${auth_alg}= | Integ Alg SHA1 96 -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add cryptodev to all DUTs | ${4} diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-mrr.robot index 1fb2d2e1cd..e0c7941aa2 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-mrr.robot @@ -26,6 +26,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,22 +53,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base-copwhtlistbase +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -85,148 +92,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot index 933e5da82b..5c6b3bfca8 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrpdrdisc.robot @@ -27,6 +27,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput IPv4 whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -57,14 +59,15 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Discover NDR or PDR for ethip4-ip4base-copwhtlistbase +| Local template | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ | | ... | phy core(s), ${rxq} receive queue(s) per NIC port. | | ... | [Ver] Find NDR or PDR for ${framesize} frames using binary search\ | | ... | start at 10GE linerate. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -73,7 +76,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -99,199 +102,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-copwhtlistbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4-ip4base-copwhtlistbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4-ip4base-copwhtlistbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4-ip4base-copwhtlistbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-ethip4-ip4base-copwhtlistbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps. | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-ethip4-ip4base-copwhtlistbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps, LT=0.5%. | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-64B-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4-ip4base-copwhtlistbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4-ip4base-copwhtlistbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-9000B-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps. | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc12-9000B-2t2c-ethip4-ip4base-copwhtlistbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps, LT=0.5%. | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc13-64B-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4-ip4base-copwhtlistbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4-ip4base-copwhtlistbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-9000B-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps. | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc18-9000B-4t4c-ethip4-ip4base-copwhtlistbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps, LT=0.5%. | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-mrr.robot index 9264b06d8a..7253731de1 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 iAcl whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,22 +52,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base-iacldstbase -| | ... +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -90,148 +96,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1CC -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrpdrdisc.robot index ca5eefd2fb..93a67b677c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput IPv4 iAcl whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -56,14 +58,15 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Discover NDR or PDR for ethip4-ip4base-iacldstbase +| Local template | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ | | ... | phy core(s), ${rxq} receive queue(s) per NIC port. | | ... | [Ver] Find NDR or PDR for ${framesize} frames using binary search\ | | ... | start at 10GE linerate. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -72,7 +75,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -104,200 +107,74 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-iacldstbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4-ip4base-iacldstbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4-ip4base-iacldstbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4-ip4base-iacldstbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-ethip4-ip4base-iacldstbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps. | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-ethip4-ip4base-iacldstbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps, LT=0.5%. | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-64B-2t2c-ethip4-ip4base-iacldstbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4-ip4base-iacldstbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4-ip4base-iacldstbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4-ip4base-iacldstbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-9000B-2t2c-ethip4-ip4base-iacldstbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps. | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc12-9000B-2t2c-ethip4-ip4base-iacldstbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps, LT=0.5%. | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc13-64B-4t4c-ethip4-ip4base-iacldstbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4-ip4base-iacldstbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR -| | ... | for 64 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4-ip4base-iacldstbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4-ip4base-iacldstbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR -| | ... | for 1518 Byte frames using binary search start at 10GE linerate, -| | ... | step 50kpps, LT=0.5%. | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-9000B-4t4c-ethip4-ip4base-iacldstbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps. | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc18-9000B-4t4c-ethip4-ip4base-iacldstbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR -| | ... | for 9000 Byte frames using binary search start at 10GE linerate, -| | ... | step 10kpps, LT=0.5%. | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-mrr.robot index 0f4514e764..4bb4af4be1 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-mrr.robot @@ -26,6 +26,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 policer test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -53,17 +55,22 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base-ipolicemarkbase +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Find NDR or PDR for ${framesize} frames using binary search\ -| | ... | start at 10GE linerate. +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${cb}= | Set Variable If | | ... | '${framesize}' == 'IMIX_v4_1' | ${1518} | ${framesize} @@ -74,7 +81,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -86,148 +93,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threada, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threada, 4 \ -| | ... | phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrpdrdisc.robot index 163aac01ec..1236a95be5 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrpdrdisc.robot @@ -27,6 +27,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput IPv4 policer test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -59,14 +61,15 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase +| Local template | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ | | ... | phy core(s), ${rxq} receive queue(s) per NIC port. | | ... | [Ver] Find NDR or PDR for ${framesize} frames using binary search\ | | ... | start at 10GE linerate. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -77,7 +80,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,199 +99,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps. | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find PDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps, LT=0.5%. | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps. | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find PDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps, LT=0.5%. | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 10kpps. | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find PDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 10kpps, \ -| | ... | LT=0.5%. | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-64B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps. | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps, LT=0.5%. | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps, LT=0.5%. | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 10kpps. | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc12-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 10kpps, \ -| | ... | LT=0.5%. | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc13-64B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps. | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find PDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps, LT=0.5%. | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find PDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 50kpps, LT=0.5%. | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 10kpps. | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc18-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find PDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 10kpps, \ -| | ... | LT=0.5%. | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot index 87f2f3c09c..17c3e77a04 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -48,22 +50,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base -| | ... +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -74,148 +80,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot index 981eb636e7..c58515121e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdr.robot @@ -48,7 +48,7 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... -| Test Template | Discover NDRPDR for ethip4-ip4base +| Test Template | Local template *** Variables *** # X520-DA2 bandwidth limit @@ -57,21 +57,21 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Discover NDRPDR for ethip4-ip4base +| Local template | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ | | ... | phy core(s), ${rxq} receive queue(s) per NIC port. | | ... | [Ver] Find NDR and PDR for ${framesize} frames using optimized search\ | | ... | start at 10GE linerate. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | ${20000} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_uniditrectional_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ${max_rate}= | Evaluate | 2*${max_uniditrectional_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -83,60 +83,48 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-ndrpdr | | [Tags] | 64B | 1C -| | ... -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-ndrpdr | | [Tags] | 1518B | 1C -| | ... -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-ndrpdr | | [Tags] | 1518B | 1C -| | ... -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-ndrpdr | | [Tags] | IMIX | 1C -| | ... -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-ndrpdr | | [Tags] | 64B | 2C -| | ... -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-ndrpdr | | [Tags] | 1518B | 2C -| | ... -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-ndrpdr | | [Tags] | 9000B | 2C -| | ... -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-ndrpdr | | [Tags] | IMIX | 2C -| | ... -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-ndrpdr | | [Tags] | 64B | 4C -| | ... -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-ndrpdr | | [Tags] | 1518B | 4C -| | ... -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-ndrpdr | | [Tags] | 9000B | 4C -| | ... -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-ndrpdr | | [Tags] | IMIX | 4C -| | ... -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdrdisc.robot index 62bdfd365c..26c9e473eb 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -55,14 +57,15 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Discover NDR or PDR for ethip4-ip4base +| Local template | | [Documentation] | | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ | | ... | phy core(s), ${rxq} receive queue(s) per NIC port. | | ... | [Ver] Find NDR or PDR for ${framesize} frames using binary search\ | | ... | start at 10GE linerate. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -71,7 +74,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -89,181 +92,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4-ip4base-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4-ip4base-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4-ip4base-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-ethip4-ip4base-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames -| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-ethip4-ip4base-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-64B-2t2c-ethip4-ip4base-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4-ip4base-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4-ip4base-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4-ip4base-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-9000B-2t2c-ethip4-ip4base-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames -| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc12-9000B-2t2c-ethip4-ip4base-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc13-64B-4t4c-ethip4-ip4base-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4-ip4base-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4-ip4base-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4-ip4base-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames -| | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-9000B-4t4c-ethip4-ip4base-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames -| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc18-9000B-4t4c-ethip4-ip4base-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-mrr.robot index dea047b5fe..e1f57f09fd 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,22 +52,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} *** Keywords *** -| Check RR for ethip4-ip4scale200k +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -77,148 +84,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrpdrdisc.robot index 880b6e6fbc..b686f5fb37 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale200k-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -91,7 +91,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -114,7 +114,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -136,7 +136,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -159,7 +159,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -180,7 +180,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -202,7 +202,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -224,7 +224,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -247,7 +247,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -269,7 +269,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -292,7 +292,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -313,7 +313,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -335,7 +335,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -357,7 +357,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -380,7 +380,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -402,7 +402,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -425,7 +425,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -446,7 +446,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-mrr.robot index 808d23cc74..9624c9ca89 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,22 +52,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} *** Keywords *** -| Check RR for ethip4-ip4scale20k -| | ... +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -77,148 +83,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrpdrdisc.robot index 9e4dd8aa9e..7f1918b7a3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale20k-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -91,7 +91,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -114,7 +114,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -136,7 +136,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -159,7 +159,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -180,7 +180,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -202,7 +202,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -224,7 +224,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -247,7 +247,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -269,7 +269,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -292,7 +292,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -313,7 +313,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -335,7 +335,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -357,7 +357,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -380,7 +380,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -402,7 +402,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -425,7 +425,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -446,7 +446,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-mrr.robot index 08b1279e90..4db6f4c363 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,22 +52,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} *** Keywords *** -| Check RR for ethip4-ip4scale2m +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -77,148 +84,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrpdrdisc.robot index 37a665cac4..4cd00b1dd4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4scale2m-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -91,7 +91,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -114,7 +114,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -136,7 +136,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -159,7 +159,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -180,7 +180,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -202,7 +202,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -224,7 +224,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -247,7 +247,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -269,7 +269,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -292,7 +292,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -313,7 +313,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -335,7 +335,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -357,7 +357,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -380,7 +380,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -402,7 +402,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -425,7 +425,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology @@ -446,7 +446,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv4 forwarding with scaling in 3-node circular topology diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100flows-ndrpdrdisc.robot index 7c284f0bce..bff07ea2aa 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdrdisc.robot index d4294c127b..91170e6da3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdrdisc.robot index 8fd0365b03..1695a4dd06 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100flows-ndrpdrdisc.robot index c363fafced..aca5177542 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdrdisc.robot index ae02a27877..53f609874f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdrdisc.robot index 56165a345b..04f691dbef 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl10sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100flows-ndrpdrdisc.robot index 7605798687..629fc3baa4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdrdisc.robot index 03a6a07c4c..2568f5237e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot index 54a20fd19c..1d048bc35d 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -67,22 +69,26 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Check RR for IPv4 routing with ACLs -| | ... +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config with ACL. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +102,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdrdisc.robot index 1cddfaf9eb..ec6c2a5865 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100flows-ndrpdrdisc.robot index 6176bcd27a..3b43f90b6f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdrdisc.robot index e2821c1282..d76e4ee792 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot index ab48ea1f3d..9f2fb7cb0a 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -67,22 +69,27 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Check RR for IPv4 routing with ACLs +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config with ACL. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdrdisc.robot index 998d2de61b..89004d6832 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl1sl-10kflows-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -72,15 +74,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100flows-ndrpdrdisc.robot index 3ff13f7175..4f2c474795 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-ip4base-iacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-ip4base-iacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdrdisc.robot index 0d2c519c89..0b9af35dd6 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot index 50071139ad..7f06ed2d0b 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -67,22 +69,27 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Check RR for IPv4 routing with ACLs +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config with ACL. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdrdisc.robot index 6b3e39248b..534c77c48d 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100flows-ndrpdrdisc.robot index 9fa3808880..5aae40a044 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdrdisc.robot index 5d1b3b4a5b..69847c9326 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot index 8d652973bc..4b4a92087e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -67,22 +69,27 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Check RR for IPv4 routing with ACLs +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config with ACL. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdrdisc.robot index 0f09011855..2eec70b130 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-iacl50sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-mrr.robot index 183392773c..c3d31813cc 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-mrr.robot @@ -29,6 +29,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -53,23 +55,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4udp-1u1p *** Keywords *** -| Check RR for IPv4 routing with NAT44 +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. NAT44 is\ -| | ... | configured between DUTs - 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -81,157 +87,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdrdisc.robot index 6724507f7d..0fa9706a77 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-nat44-ndrpdrdisc.robot @@ -30,6 +30,8 @@ | Test Teardown | Tear down performance discovery test with NAT | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -59,9 +61,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-1u1p *** Keywords *** -| Discover NDR or PDR for IPv4 routing with NAT44 -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -71,7 +73,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -90,235 +92,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-snat-1u-1p-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4-ip4base-snat-1u-1p-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4-ip4base-snat-1u-1p-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4-ip4base-snat-1u-1p-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4-ip4base-snat-1u-1p-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4-ip4base-snat-1u-1p-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4-ip4base-snat-1u-1p-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4-ip4base-snat-1u-1p-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4-ip4base-snat-1u-1p-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4-ip4base-snat-1u-1p-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4-ip4base-snat-1u-1p-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4-ip4base-snat-1u-1p-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4-ip4base-snat-1u-1p-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4-ip4base-snat-1u-1p-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4-ip4base-snat-1u-1p-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4-ip4base-snat-1u-1p-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4-ip4base-snat-1u-1p-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4-ip4base-snat-1u-1p-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100flows-ndrpdrdisc.robot index fff456fc72..0a816de129 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdrdisc.robot index 2edbb2f93a..ba11329750 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdrdisc.robot index bf8d21dd21..0df726440c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100flows-ndrpdrdisc.robot index 9fa9a0fe57..d38cd33232 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdrdisc.robot index 292ce51a35..3b99ce3825 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdrdisc.robot index 1db38bf01a..cca06bc1ab 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl10sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100flows-ndrpdrdisc.robot index 3c0be4f08f..3bb25e1546 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdrdisc.robot index 2f746e258d..cda66cc035 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdrdisc.robot index 195ac35546..685f188da8 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100flows-ndrpdrdisc.robot index ddf6baedc2..e6b67c7ab7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdrdisc.robot index b13aee5b00..19bca2c4b9 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdrdisc.robot index 993e8e6a2d..321d2ef780 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl1sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100flows-ndrpdrdisc.robot index 3804c8fa65..141ad893dd 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdrdisc.robot index b879bec631..94d73f84fe 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdrdisc.robot index e2801c660c..316d2135b5 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100flows-ndrpdrdisc.robot index 982e0faa08..c9899ce2d4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdrdisc.robot index 912912de7a..124810b7f9 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdrdisc.robot index c040cfff7d..d8fbc85198 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-oacl50sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for IPv4 routing with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -102,73 +106,25 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-oacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-oacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-ethip4udp-ip4base-oacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-ethip4udp-ip4base-oacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-ethip4udp-ip4base-oacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-ethip4udp-ip4base-oacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdrdisc.robot index d434426dc6..46a2b39271 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4base-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -30,6 +30,8 @@ | Test Teardown | Tear down performance discovery test with NAT | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -59,9 +61,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-1u15p *** Keywords *** -| Discover NDR or PDR for IPv4 routing with NAT44 -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -71,7 +73,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -90,235 +92,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4udp-ip4base-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdrdisc.robot index f688aa333a..cedfea3c50 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale10-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -31,6 +31,8 @@ | Test Teardown | Tear down performance discovery test with NAT | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -60,9 +62,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-10u15p *** Keywords *** -| Discover NDR or PDR for IPv4 routing with NAT44 -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -72,7 +74,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -91,235 +93,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4udp-ip4scale10-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 10 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdrdisc.robot index 81795d01b8..487528d3ef 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -31,6 +31,8 @@ | Test Teardown | Tear down performance discovery test with NAT | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -60,9 +62,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-100u15p *** Keywords *** -| Discover NDR or PDR for IPv4 routing with NAT44 -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -72,7 +74,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -91,235 +93,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4udp-ip4scale100-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 100 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot index f8c88a8433..ea4096b172 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot @@ -30,6 +30,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -54,22 +56,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4udp-1000u15p *** Keywords *** -| Check RR for IPv4 routing with NAT44 +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.NAT44 is configured\ -| | ... | between DUTs - 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -81,157 +88,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdrdisc.robot index c63f0c5ccc..7d1df407f3 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale1000-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -31,6 +31,8 @@ | Test Teardown | Tear down performance discovery test with NAT | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -60,9 +62,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-1000u15p *** Keywords *** -| Discover NDR or PDR for IPv4 routing with NAT44 -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -72,7 +74,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -91,235 +93,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdrdisc.robot index b5980ca6a4..d4befa97c4 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale2000-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -31,6 +31,8 @@ | Test Teardown | Tear down performance discovery test with NAT | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -60,9 +62,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-2000u15p *** Keywords *** -| Discover NDR or PDR for IPv4 routing with NAT44 -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -72,7 +74,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -91,235 +93,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4udp-ip4scale2000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 2000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdrdisc.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdrdisc.robot index 395668c119..da11430106 100644 --- a/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4udp-ip4scale4000-udpsrcscale15-nat44-ndrpdrdisc.robot @@ -31,6 +31,8 @@ | Test Teardown | Tear down performance discovery test with NAT | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -60,9 +62,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-4000u15p *** Keywords *** -| Discover NDR or PDR for IPv4 routing with NAT44 -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${rxq}=${None} | ${min_rate}=${50000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -72,7 +74,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -91,235 +93,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4udp-ip4scale4000-udpsrcscale15-snat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 4000 users and 15 ports (sessions) per user. -| | ... | [Ver] Find PDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot index 670c26fd52..5650f473f7 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-copwhtlistbase-mrr.robot @@ -26,6 +26,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,22 +53,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base-copwhtlistbase +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -85,148 +92,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot index 38af1a0a52..d4937e700d 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-iacldstbase-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 iAcl whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,22 +52,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base-iacldstbase +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -90,148 +97,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1CC -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-iacldstbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot index d0c23c8f37..277932a18c 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-ipolicemarkbase-mrr.robot @@ -26,6 +26,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 policer test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -53,17 +55,22 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base-ipolicemarkbase +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Find NDR or PDR for ${framesize} frames using binary search\ -| | ... | start at 10GE linerate. +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${cb}= | Set Variable If | | ... | '${framesize}' == 'IMIX_v4_1' | ${1518} | ${framesize} @@ -74,7 +81,7 @@ | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -86,148 +93,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 \ -| | ... | phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 \ -| | ... | phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threada, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 \ -| | ... | phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-ipolicemarkbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threada, 4 \ -| | ... | phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-ipolicemarkbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot index 062b3e7f2c..3e76b7027e 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4base-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -48,22 +50,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -74,148 +81,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot index 369feba589..e3461bcf97 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale200k-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,22 +52,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} *** Keywords *** -| Check RR for ethip4-ip4scale200k +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -77,148 +84,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale200k -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot index 3436d0ab3d..95767a4b00 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale20k-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,22 +52,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} *** Keywords *** -| Check RR for ethip4-ip4scale20k +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -77,148 +84,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale20k -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot index 91b95a8c5e..968b5fe309 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4-ip4scale2m-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,22 +52,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${rts_per_flow} *** Keywords *** -| Check RR for ethip4-ip4scale2m +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -77,148 +84,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4scale2m -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot index 1dc5ae42f7..fe1e260629 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sf-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -67,22 +69,27 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Check RR for IPv4 routing with ACLs +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4udp-ip4base-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot index 8602970de4..67e498d2ae 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl1sl-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -67,22 +69,27 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Check RR for IPv4 routing with ACLs +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4udp-ip4base-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot index 2bf633d14f..8e3d74361f 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sf-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -67,22 +69,27 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Check RR for IPv4 routing with ACLs +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4udp-ip4base-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot index dd3273c7db..8f56bbad83 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-iacl50sl-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -67,22 +69,27 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Check RR for IPv4 routing with ACLs +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4udp-ip4base-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with ACLs -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot index 6826fd0383..a64e2c1e48 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4base-nat44-mrr.robot @@ -29,6 +29,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -53,23 +55,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4udp-1u1p *** Keywords *** -| Check RR for IPv4 routing with NAT44 +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. NAT44 is\ -| | ... | configured between DUTs - 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -81,160 +87,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-snat-1u-1p-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1 user and 1 port (session) per user. -| | ... | [Ver] Find NDR for IMIX frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot index d297773bf4..386b742adb 100644 --- a/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot +++ b/tests/vpp/perf/ip4/10ge2p1x710-ethip4udp-ip4scale1000-udpsrcscale15-nat44-mrr.robot @@ -30,6 +30,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results NAT44 performance test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -54,22 +56,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4udp-1000u15p *** Keywords *** -| Check RR for IPv4 routing with NAT44 +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.NAT44 is configured\ -| | ... | between DUTs - 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -81,160 +88,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4udp-ip4scale1000-udpsrcscale15-snat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. NAT44 is configured between DUTs -\ -| | ... | 1000 users and 15 ports (sessions) per user. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv4 routing with NAT44 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot index c11f973397..9cb24f6701 100644 --- a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,24 +52,29 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} | | ${max_rate}= | Set Variable If | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +85,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot index 07a2a51836..b913ed6c8e 100644 --- a/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4/40ge2p1xl710-ethip4-ip4base-ndrpdrdisc.robot @@ -76,7 +76,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -99,7 +99,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -122,7 +122,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -145,7 +145,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -168,7 +168,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -191,7 +191,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -215,7 +215,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -239,7 +239,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -263,7 +263,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot index a925929c8b..f86f1bf419 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-mrr.robot @@ -27,6 +27,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results Lisp test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,16 +55,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4lispip4-ip4base -| | ... +| Local template | | [Documentation] | | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters\ -| | ... | config with ${wt} thread(s), ${wt} phy core(s), ${rxq} receive\ -| | ... | queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... | | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} @@ -70,7 +77,7 @@ | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${lisp_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${lisp_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -88,160 +95,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1480B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${1480} +| | phy_cores=${1} | framesize=${1480} | tc03-9000B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1480B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${1480} +| | phy_cores=${2} | framesize=${1480} | tc07-9000B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1480B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${1480} +| | phy_cores=${4} | framesize=${1480} | tc11-9000B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot index e1e1aa4fc8..7b75d7d48f 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip4-ip4base-ndrpdrdisc.robot @@ -65,7 +65,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -95,7 +95,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -126,7 +126,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -156,7 +156,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -187,7 +187,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -216,7 +216,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -246,7 +246,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -276,7 +276,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -307,7 +307,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -337,7 +337,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -368,7 +368,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -397,7 +397,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -427,7 +427,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -457,7 +457,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -488,7 +488,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -518,7 +518,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -549,7 +549,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology @@ -578,7 +578,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 forwarding in 3-node circular topology diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot index 162db49639..5f3f7bdd42 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4lispip6-ip4base-ndrpdrdisc.robot @@ -66,7 +66,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -96,7 +96,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -127,7 +127,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -157,7 +157,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -188,7 +188,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -217,7 +217,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -247,7 +247,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -277,7 +277,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -308,7 +308,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -338,7 +338,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -369,7 +369,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -398,7 +398,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -428,7 +428,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -458,7 +458,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -489,7 +489,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -519,7 +519,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -550,7 +550,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology @@ -579,7 +579,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv4 over IPv6 forwarding in 3-node circular topology diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot index 2273ef4b66..093ffea82d 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD with VXLANoIPv4 test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,23 +53,28 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for ethip4vxlan-l2bdbasemaclrn +| Local template | | ... | | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD forwarding config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${vxlan_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +85,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot index 50318db9a7..ddf080230a 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrpdrdisc.robot @@ -72,7 +72,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -96,7 +96,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -121,7 +121,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -144,7 +144,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -168,7 +168,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -191,7 +191,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -215,7 +215,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -239,7 +239,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -264,7 +264,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -287,7 +287,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -311,7 +311,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -334,7 +334,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -358,7 +358,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -382,7 +382,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -407,7 +407,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -430,7 +430,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -454,7 +454,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology @@ -477,7 +477,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot index e611431f8c..5c9020f66a 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-mrr.robot @@ -51,23 +51,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for ethip4vxlan-l2xcbase -| | ... +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC forwarding config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${vxlan_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +82,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot index 615aa57e7e..9598dd0294 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x520-ethip4vxlan-l2xcbase-ndrpdrdisc.robot @@ -68,7 +68,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -89,7 +89,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -111,7 +111,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -131,7 +131,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -152,7 +152,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -172,7 +172,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -193,7 +193,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -214,7 +214,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -236,7 +236,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -256,7 +256,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -277,7 +277,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -297,7 +297,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -318,7 +318,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -339,7 +339,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -361,7 +361,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -381,7 +381,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -402,7 +402,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology @@ -422,7 +422,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot index a804b72cac..9ad56b6a80 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4lispip4-ip4base-mrr.robot @@ -27,6 +27,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results Lisp test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,24 +55,28 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4lispip4-ip4base -| | ... +| Local template | | [Documentation] | | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist filters\ -| | ... | config with ${wt} thread(s), ${wt} phy core(s), ${rxq} receive\ -| | ... | queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${lisp_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${lisp_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -88,160 +94,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1480B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${1480} +| | phy_cores=${1} | framesize=${1480} | tc03-9000B-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 1 phy core, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1480B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${1480} +| | phy_cores=${2} | framesize=${1480} | tc07-9000B-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 2 phy cores, 1 receive queue per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1480B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 1480B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1480B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${1480} +| | phy_cores=${4} | framesize=${1480} | tc11-9000B-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4lispip4-ip4base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 LISP remote static mappings and whitelist\ -| | ... | filters config with 4 phy cores, 2 receive queues per NIC\ -| | ... | port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4lispip4-ip4base -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot index 6cc7f35537..29a9a215e9 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD with VXLANoIPv4 test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,23 +53,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for ethip4vxlan-l2bdbasemaclrn -| | ... +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD forwarding config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${vxlan_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +84,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | SKIP_PATCH -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD forwarding config with 4 phy cores,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot index b8c3f5c2c2..22fc9f44dc 100644 --- a/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot +++ b/tests/vpp/perf/ip4_tunnels/10ge2p1x710-ethip4vxlan-l2xcbase-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC with VXLANoIPv4 test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,23 +53,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for ethip4vxlan-l2xcbase -| | ... +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC forwarding config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test execution and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize + ${vxlan_overhead}} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize + ${vxlan_overhead}} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +84,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip4vxlan-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC forwarding config with 4 phy cores,\ -| | ... | 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2xcbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot index 1a06a0fc73..f7904c2380 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-mrr.robot @@ -26,6 +26,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,21 +54,26 @@ | ${traffic_profile} | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Check RR for ip6base-copwhtlistbase +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with ${wt} \ -| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with +| | ... | ${phy_cores} phy core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -85,148 +92,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot index e11df36848..b2d3f7134a 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrpdrdisc.robot @@ -70,7 +70,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -100,7 +100,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -131,7 +131,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -161,7 +161,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -192,7 +192,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -221,7 +221,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -251,7 +251,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -281,7 +281,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -312,7 +312,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -342,7 +342,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -373,7 +373,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -402,7 +402,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -432,7 +432,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -462,7 +462,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -493,7 +493,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -523,7 +523,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -554,7 +554,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology @@ -583,7 +583,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize IPv6 forwarding in 3-node circular topology diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot index 7e8bfa1db5..2e27749802 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 iAcl whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,21 +52,26 @@ | ${traffic_profile} | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Check RR for ip6base-iacldstbase +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with ${wt} \ -| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with +| | ... | ${phy_cores} phy core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -76,148 +83,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot index 49e8240e4f..15581383e7 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrpdrdisc.robot @@ -68,7 +68,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -91,7 +91,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -115,7 +115,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -138,7 +138,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -162,7 +162,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -184,7 +184,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -207,7 +207,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -230,7 +230,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -254,7 +254,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -277,7 +277,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -301,7 +301,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -323,7 +323,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -346,7 +346,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -369,7 +369,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -393,7 +393,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -416,7 +416,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -440,7 +440,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -462,7 +462,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot index 5e5e98f6e0..dd43716841 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -48,21 +50,26 @@ | ${traffic_profile} | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Check RR for ethip6-ip6base +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -73,148 +80,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${78} | wt=1 | rxq=1 +| | framesize=${78} | phy_cores=${1} | tc02-1518B-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${78} | wt=2 | rxq=1 +| | framesize=${78} | phy_cores=${2} | tc06-1518B-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${78} | wt=4 | rxq=2 +| | framesize=${78} | phy_cores=${4} | tc10-1518B-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot index faadd24f22..0222b99df7 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-ndrpdrdisc.robot @@ -66,7 +66,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -87,7 +87,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -109,7 +109,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -130,7 +130,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -152,7 +152,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -172,7 +172,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -193,7 +193,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -214,7 +214,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -236,7 +236,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -257,7 +257,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -279,7 +279,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -299,7 +299,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -320,7 +320,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -341,7 +341,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -363,7 +363,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -384,7 +384,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -406,7 +406,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology @@ -426,7 +426,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding in 3-node circular topology diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot index 5986b1f440..18f206f49f 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,21 +54,26 @@ | ${traffic_profile} | trex-sl-3n-ethip6-ip6dst${rts_per_flow} *** Keywords *** -| Check RR for ip6base-ip6scale +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} \ -| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +85,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot index 225c5d4a7d..26b94f8919 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale200k-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -91,7 +91,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -114,7 +114,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -136,7 +136,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -159,7 +159,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -180,7 +180,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -202,7 +202,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -224,7 +224,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -247,7 +247,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -269,7 +269,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -292,7 +292,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -313,7 +313,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -335,7 +335,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -357,7 +357,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -380,7 +380,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -402,7 +402,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -425,7 +425,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -446,7 +446,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot index 2e8be63d51..2be3e5e875 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,21 +54,26 @@ | ${traffic_profile} | trex-sl-3n-ethip6-ip6dst${rts_per_flow} *** Keywords *** -| Check RR for ip6base-ip6scale +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} \ -| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +85,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot index 4d5b30a4fb..79101a07c1 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale20k-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -91,7 +91,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -114,7 +114,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -136,7 +136,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -159,7 +159,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -180,7 +180,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -202,7 +202,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -224,7 +224,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -247,7 +247,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -269,7 +269,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -292,7 +292,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -313,7 +313,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -335,7 +335,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -357,7 +357,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -380,7 +380,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -402,7 +402,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -425,7 +425,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -446,7 +446,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot index 124934d283..2b241e3c61 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,21 +54,26 @@ | ${traffic_profile} | trex-sl-3n-ethip6-ip6dst${rts_per_flow} *** Keywords *** -| Check RR for ip6base-ip6scale +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} \ -| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +85,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1
\ No newline at end of file diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot index 1570d777e3..f196c0d707 100644 --- a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6scale2m-ndrpdrdisc.robot @@ -69,7 +69,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -91,7 +91,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -114,7 +114,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -136,7 +136,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -159,7 +159,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -180,7 +180,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -202,7 +202,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -224,7 +224,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -247,7 +247,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -269,7 +269,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -292,7 +292,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -313,7 +313,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -335,7 +335,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -357,7 +357,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -380,7 +380,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -402,7 +402,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -425,7 +425,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology @@ -446,7 +446,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-mrr.robot index 016979ca74..dbc9bd2d78 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-copwhtlistbase-mrr.robot @@ -26,6 +26,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,21 +54,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Check RR for ip6base-copwhtlistbase +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with ${wt} \ -| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with +| | ... | ${phy_cores} phy core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -85,148 +92,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6-ip6base-copwhtlistbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ip6base-copwhtlistbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-mrr.robot index fa069bdca2..92297eeb64 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-iacldstbase-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 iAcl whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,21 +52,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Check RR for ip6base-iacldstbase +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with ${wt} \ -| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with +| | ... | ${phy_cores} phy core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -76,148 +83,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6-ip6base-iacldstbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ip6base-iacldstbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-mrr.robot index 83574bdd58..88043d7193 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6base-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -48,21 +50,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Check RR for ethip6-ip6base +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -73,148 +80,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${78} | wt=1 | rxq=1 +| | framesize=${78} | phy_cores=${1} | tc02-1518B-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${78} | wt=2 | rxq=1 +| | framesize=${78} | phy_cores=${2} | tc06-1518B-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${78} | wt=4 | rxq=2 +| | framesize=${78} | phy_cores=${4} | tc10-1518B-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot index d434dcff87..28872e58c7 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale200k-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,21 +54,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6dst${rts_per_flow} *** Keywords *** -| Check RR for ip6base-ip6scale +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} \ -| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +85,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6-ip6base-ip6scale200k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot index 6c78447762..f38bcfb877 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale20k-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,21 +54,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6dst${rts_per_flow} *** Keywords *** -| Check RR for ip6base-ip6scale +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} \ -| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +85,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6-ip6base-ip6scale20k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot index 8fb9eec6e3..20f0f8c708 100644 --- a/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot +++ b/tests/vpp/perf/ip6/10ge2p1x710-ethip6-ip6scale2m-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,21 +54,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6dst${rts_per_flow} *** Keywords *** -| Check RR for ip6base-ip6scale +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} \ -| | ... | thread(s), ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,148 +85,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6-ip6base-ip6scale2m-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with \ -| | ... | 4 phy cores, 2 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ip6base-ip6scale -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot index a0b41cbe52..99b882edf8 100644 --- a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot +++ b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,23 +53,28 @@ | ${traffic_profile} | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Check RR for ethip6-ip6base +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv6 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} | | ${max_rate}= | Set Variable If | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -80,148 +87,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${78} | wt=1 | rxq=1 +| | framesize=${78} | phy_cores=${1} | tc02-1518B-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-78B-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${78} | wt=2 | rxq=1 +| | framesize=${78} | phy_cores=${2} | tc06-1518B-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-78B-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${78} | wt=4 | rxq=2 +| | framesize=${78} | phy_cores=${4} | tc10-1518B-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip6-ip6base-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip6-ip6base -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot index a78019ab5c..55c61b99fa 100644 --- a/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6/40ge2p1xl710-ethip6-ip6base-ndrpdrdisc.robot @@ -68,7 +68,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -91,7 +91,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -114,7 +114,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -137,7 +137,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -160,7 +160,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -183,7 +183,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot index 7f5f8d29d3..ba0a51a5b2 100644 --- a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip4-ip6base-ndrpdrdisc.robot @@ -66,7 +66,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -96,7 +96,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -127,7 +127,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -157,7 +157,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -188,7 +188,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -217,7 +217,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -247,7 +247,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -277,7 +277,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -308,7 +308,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -338,7 +338,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -369,7 +369,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -398,7 +398,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -428,7 +428,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -458,7 +458,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -489,7 +489,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -519,7 +519,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -550,7 +550,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology @@ -579,7 +579,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology diff --git a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdrdisc.robot b/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdrdisc.robot index 993b014dc2..cc3ec136fa 100644 --- a/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdrdisc.robot +++ b/tests/vpp/perf/ip6_tunnels/10ge2p1x520-ethip6lispip6-ip6base-ndrpdrdisc.robot @@ -66,7 +66,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -96,7 +96,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -127,7 +127,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -157,7 +157,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -188,7 +188,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -217,7 +217,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -247,7 +247,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -277,7 +277,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -308,7 +308,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -338,7 +338,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -369,7 +369,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -398,7 +398,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -428,7 +428,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -458,7 +458,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -489,7 +489,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -519,7 +519,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -550,7 +550,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology @@ -579,7 +579,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize LISP IPv6 forwarding in 3-node circular topology diff --git a/tests/vpp/perf/l2/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrpdrdisc.robot index 9a2f26e887..2f09211ecb 100644 --- a/tests/vpp/perf/l2/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -56,21 +56,20 @@ *** Keywords *** | L2 Bridge Domain NDR Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} -| | # Test Variables required for test teardown +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | ${phy_cores} phy core. +| | ... | [Ver] Find NDR for ${framesize}B Byte frames using binary search\ +| | ... | start at 10GE linerate, step 50kpps. +| | [Arguments] | ${framesize} | ${phy_cores} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Documentation | [Cfg] DUT runs L2BD switching config with ${wt}\ -| | Set Test Documentation | thread, ${wt} phy core, ${rxq}\ | append=True -| | Set Test Documentation | receive queue per NIC port. | append=True -| | Set Test Documentation | [Ver] Find NDR for ${framesize} Byte\ | append=True -| | Set Test Documentation | frames using binary search start at\ | append=True -| | Set Test Documentation | 10GE linerate, step ${threshold}pps. | append=True -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | | Add PCI devices to all DUTs | | Run Keyword If | ${framesize} < ${1522} | Add no multi seg to all DUTs | | Apply startup configuration on all VPP DUTs @@ -80,23 +79,20 @@ | | ... | ${min_rate} | ${max_rate} | ${threshold} | L2 Bridge Domain PDR Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} -| | # Test Variables required for test teardown +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with with\ +| | ... | ${phy_cores} phy core. +| | ... | [Ver] Find PDR for ${framesize}B Byte frames using binary search\ +| | ... | start at 10GE linerate, step 50kpps. +| | [Arguments] | ${framesize} | ${phy_cores} | ${min_rate}=${50000} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Documentation | [Cfg] DUT runs L2BD switching config with ${wt}\ -| | Set Test Documentation | thread, ${wt} phy core, ${rxq}\ | append=True -| | Set Test Documentation | receive queue per NIC port. | append=True -| | Set Test Documentation | [Ver] Find PDR for ${framesize} Byte\ | append=True -| | Set Test Documentation | frames using binary search start at\ | append=True -| | Set Test Documentation | 10GE linerate, step ${threshold}pps, | append=True -| | Set Test Documentation | LT=${perf_pdr_loss_acceptance} | append=True -| | Set Test Documentation | ${perf_pdr_loss_acceptance_type}. | append=True -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | | Add PCI devices to all DUTs | | Run Keyword If | ${framesize} < ${1522} | Add no multi seg to all DUTs | | Apply startup configuration on all VPP DUTs @@ -108,181 +104,91 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 1C | NDRDISC | | [Template] | L2 Bridge Domain NDR Binary Search +| | framesize=${64} | phy_cores=${1} | tc02-64B-1t1c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain PDR Binary Search +| | framesize=${64} | phy_cores=${1} | tc03-1518B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 1C | NDRDISC | | [Template] | L2 Bridge Domain NDR Binary Search +| | framesize=${1518} | phy_cores=${1} | tc04-1518B-1t1c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain PDR Binary Search +| | framesize=${1518} | phy_cores=${1} | tc05-9000B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 1C | NDRDISC | | [Template] | L2 Bridge Domain NDR Binary Search +| | framesize=${9000} | phy_cores=${1} | tc06-9000B-1t1c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain PDR Binary Search +| | framesize=${9000} | phy_cores=${1} | tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 2C | NDRDISC | | [Template] | L2 Bridge Domain NDR Binary Search +| | framesize=${64} | phy_cores=${2} | tc08-64B-2t2c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain PDR Binary Search +| | framesize=${64} | phy_cores=${2} | tc09-1518B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain NDR Binary Search +| | framesize=${1518} | phy_cores=${2} | tc10-1518B-2t2c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain PDR Binary Search +| | framesize=${1518} | phy_cores=${2} | tc11-9000B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain NDR Binary Search +| | framesize=${9000} | phy_cores=${2} | tc12-9000B-2t2c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain PDR Binary Search +| | framesize=${9000} | phy_cores=${2} | tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 4C | NDRDISC | | [Template] | L2 Bridge Domain NDR Binary Search +| | framesize=${64} | phy_cores=${4} | tc14-64B-4t4c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain PDR Binary Search +| | framesize=${64} | phy_cores=${4} | tc15-1518B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain NDR Binary Search +| | framesize=${1518} | phy_cores=${4} | tc16-1518B-4t4c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain PDR Binary Search +| | framesize=${1518} | phy_cores=${4} | tc17-9000B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain NDR Binary Search +| | framesize=${9000} | phy_cores=${4} | tc18-9000B-4t4c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain PDR Binary Search +| | framesize=${9000} | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrpdrdisc.robot index 36f39df087..01716c8913 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-dot1ad-l2xcbase-ndrpdrdisc.robot @@ -74,7 +74,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -104,7 +104,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -135,7 +135,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -165,7 +165,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -196,7 +196,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -225,7 +225,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -255,7 +255,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -285,7 +285,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -316,7 +316,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -346,7 +346,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -377,7 +377,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -406,7 +406,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -436,7 +436,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -466,7 +466,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -497,7 +497,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -527,7 +527,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -558,7 +558,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -587,7 +587,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-mrr.robot index 1905eefb47..4bc8427e4d 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with 802.1q test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -57,22 +59,27 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for L2 dot1q-l2bdbasemaclrn +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with VLAN with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with VLAN. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${vlan_overhead} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -84,148 +91,49 @@ *** Test Cases *** | tc01-64B-1t1c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot index aadcc5f2f8..0e6a13b44c 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2bdbasemaclrn-ndrpdrdisc.robot @@ -25,6 +25,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with 802.1q test | ... | cases* | ... @@ -63,8 +65,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with VLAN -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -76,7 +79,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -95,223 +98,73 @@ *** Test Cases *** | tc01-64B-1t1c-dot1q-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-dot1q-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-dot1q-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-dot1q-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-dot1q-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-dot1q-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-dot1q-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-dot1q-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-dot1q-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-dot1q-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-dot1q-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-dot1q-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-dot1q-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-dot1q-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-dot1q-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-dot1q-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-dot1q-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 50kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-dot1q-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 50kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VLAN -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot index 8436affa64..c1051d7a02 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-mrr.robot @@ -26,6 +26,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC with 802.1q test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,21 +55,26 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for L2XC dot1q-l2xcbase +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with VLAN dot1q with ${wt} thread(s), \ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC config with VLAN dot1q with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -86,148 +93,49 @@ *** Test Cases *** | tc01-64B-1t1c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot index e5fc3b66ff..f8688b5f04 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-dot1q-l2xcbase-ndrpdrdisc.robot @@ -70,7 +70,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -99,7 +99,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -129,7 +129,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -158,7 +158,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -188,7 +188,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -216,7 +216,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -245,7 +245,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -274,7 +274,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -304,7 +304,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -333,7 +333,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -363,7 +363,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -391,7 +391,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -420,7 +420,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -449,7 +449,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -479,7 +479,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -508,7 +508,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -538,7 +538,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up @@ -566,7 +566,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Set interfaces in path in 3-node circular topology up diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdrdisc.robot index 92c19302e6..c2e5ed7a5f 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdrdisc.robot index 63649bb703..6c67aa43fe 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdrdisc.robot index 02c312fb10..3acc49415a 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdrdisc.robot index 612b4d7566..a8e05e00fd 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdrdisc.robot index e0e3be416d..e2d5d64204 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdrdisc.robot index 4ab2e2c0d3..7dd5489145 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl10sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdrdisc.robot index d8b45952b8..0dd677e6ea 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdrdisc.robot index d48540715f..ba5154c54c 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot index 9de8e8b5ef..0997fcee57 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -71,21 +73,26 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-10u1000p-conc *** Keywords *** -| Check RR for L2BD l2bdbasemaclrn-iacl1sf +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdrdisc.robot index 8faaef9241..bd88b32f0e 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdrdisc.robot index 1773a8f82b..dc8e13512e 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdrdisc.robot index 0e122bbcca..e38ca5de73 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot index 192cf48b3b..e749f82dc0 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -71,21 +73,26 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-10u1000p-conc *** Keywords *** -| Check RR for L2BD l2bdbasemaclrn-iacl1sl +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdrdisc.robot index 01a0c5e691..0a2d7014a0 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl1sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdrdisc.robot index aecc3cf8d2..6208c4e8e0 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdrdisc.robot index 0a7996f64f..069a2ca6fd 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot index 1467f1a82d..3ef8bf84e6 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -71,21 +73,26 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-10u1000p-conc *** Keywords *** -| Check RR for L2BD l2bdbasemaclrn-iacl50sf +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdrdisc.robot index bafb1fbc62..9b6666249e 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdrdisc.robot index 68f09c5aa3..4a6fd0de16 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdrdisc.robot index 3632dbc273..e1b51da2af 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot index 9a31d7b7ea..f8dc475a22 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -71,21 +73,26 @@ | ${traffic_profile} | trex-sl-3n-ethip4udp-10u1000p-conc *** Keywords *** -| Check RR for L2BD l2bdbasemaclrn-iacl50sl +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdrdisc.robot index 594ba6ed33..49493be244 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdrdisc.robot index 9ed0f51cd1..fb23e6852b 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with MACIP ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -78,9 +80,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc100ip4src100 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -89,7 +91,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -107,73 +109,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-100flows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdrdisc.robot index 5de0d46327..3b1dbeeddf 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with MACIP ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -78,9 +80,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc100kip4src100k *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -89,7 +91,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -107,73 +109,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-100kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdrdisc.robot index 9beba816c8..ba83ccd5d0 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with MACIP ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -78,9 +80,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc10kip4src10k *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -89,7 +91,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -107,73 +109,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl10sl-10kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdrdisc.robot index 4028de7c29..6ba6f537b3 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with MACIP ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -78,9 +80,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc100ip4src100 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -89,7 +91,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -107,73 +109,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-100flows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdrdisc.robot index 426b60efb4..baa1a4ab67 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with MACIP ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -78,9 +80,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc100kip4src100k *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -89,7 +91,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -107,73 +109,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-100kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdrdisc.robot index c8ac3a95b5..de03f295b1 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with MACIP ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -78,9 +80,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc10kip4src10k *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -89,7 +91,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -107,73 +109,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl1sl-10kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdrdisc.robot index 4810bc1ee3..d3b0e185b2 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with MACIP ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -78,9 +80,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc100ip4src100 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -89,7 +91,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -107,73 +109,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-100flows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdrdisc.robot index 8420ee805c..e849418e73 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with MACIP ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -78,9 +80,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc100kip4src100k *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -89,7 +91,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -107,73 +109,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-100kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdrdisc.robot index 7eaf950af2..472035f68e 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with MACIP ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -78,9 +80,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc10kip4src10k *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -89,7 +91,7 @@ | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -107,73 +109,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-macip-iacl50sl-10kflows-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with MACIP ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with MACIP ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot index 686c5be2e5..0143e43163 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -48,21 +50,26 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for l2bdbasemaclrn +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -73,136 +80,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrpdrdisc.robot index f0bb9d28ca..7c69029b8f 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -55,8 +57,10 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| L2 Bridge Domain Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Set Variable If @@ -82,181 +86,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-1518B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc04-1518B-1t1c-eth-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc05-9000B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${1} | search_type=NDR | tc06-9000B-1t1c-eth-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-eth-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR | tc09-1518B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${2} | search_type=NDR | tc10-1518B-2t2c-eth-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${2} | search_type=PDR | tc11-9000B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${2} | search_type=NDR | tc12-9000B-2t2c-eth-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${2} | search_type=PDR | tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 4C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${64} | phy_cores=${4} | search_type=NDR | tc14-64B-4t4c-eth-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${64} | phy_cores=${4} | search_type=PDR | tc15-1518B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${1518} | phy_cores=${4} | search_type=NDR | tc16-1518B-4t4c-eth-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${1518} | phy_cores=${4} | search_type=PDR | tc17-9000B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${9000} | phy_cores=${4} | search_type=NDR | tc18-9000B-4t4c-eth-l2bdbasemaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${9000} | phy_cores=${4} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdrdisc.robot index 2dbd9a9140..02b430d28d 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdrdisc.robot index d68f7160f5..21d650ca85 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdrdisc.robot index 6a00b10e6a..647224f82d 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdrdisc.robot index def8f0e7e6..0a98a2fa20 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdrdisc.robot index 9e045088c5..40f1bc9504 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdrdisc.robot index 08ff05bed4..1c6e9af255 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl10sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl10-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdrdisc.robot index 27c9d86e36..6a5bb99919 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdrdisc.robot index af35da4a61..0fcc9cce50 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdrdisc.robot index cc3337bf9f..6f1585b819 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdrdisc.robot index 06732a844e..84936fa7a9 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdrdisc.robot index 86af409aef..87a305668a 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdrdisc.robot index e3a6389bee..b6d8bb4cfe 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl1sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl1-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdrdisc.robot index e78adedf04..30df7bb1b3 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdrdisc.robot index 05680ec38c..7ddaeda869 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdrdisc.robot index a4633d4d96..67b30080f6 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sf-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateful-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdrdisc.robot index 757926180d..0c014e101e 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100flows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows100-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdrdisc.robot index 9ce643f048..c154336be7 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-100kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows100k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdrdisc.robot index 6784b8189c..dda30a970a 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-oacl50sl-10kflows-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | Test Teardown | Tear down performance test with ACL | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -73,15 +75,17 @@ | ${trex_stream2_subnet}= | 20.20.20.0/24 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with ACLs -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_core} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -101,73 +105,25 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc04-64B-2t2c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc05-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc06-64B-4t4c-eth-l2bdbasemaclrn-oacl50-stateless-flows10k-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with ACLs -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-mrr.robot index ab3ec3aa4f..3cf98c0856 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results for L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,15 +55,26 @@ | ${traffic_profile} | trex-sl-3n-ethip4-macsrc50kdst50k *** Keywords *** -| Check RR for L2BD eth-l2bdscale -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| Local template +| | [Documentation] +| | ... | [CFG] DUT runs L2BD switching config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -72,148 +85,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdrdisc.robot index 6a421441b4..4b32d6c219 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale100kmaclrn-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -58,8 +60,10 @@ | ${traffic_profile} | trex-sl-3n-ethip4-macsrc50kdst50k *** Keywords *** -| L2 Bridge Domain Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} +| Local template +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Set Variable If @@ -68,7 +72,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | Add PCI devices to all DUTs | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs @@ -85,182 +89,74 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdscale100kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-eth-l2bdscale100kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-1518B-1t1c-eth-l2bdscale100kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc04-1518B-1t1c-eth-l2bdscale100kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc05-9000B-1t1c-eth-l2bdscale100kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${1} | search_type=NDR | tc06-9000B-1t1c-eth-l2bdscale100kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-eth-l2bdscale100kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-eth-l2bdscale100kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR | tc09-1518B-2t2c-eth-l2bdscale100kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${2} | search_type=NDR | tc10-1518B-2t2c-eth-l2bdscale100kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${2} | search_type=PDR | tc11-9000B-2t2c-eth-l2bdscale100kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${2} | search_type=NDR | tc12-9000B-2t2c-eth-l2bdscale100kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${2} | search_type=PDR | tc13-64B-4t4c-eth-l2bdscale100kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 4C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${64} | phy_cores=${4} | search_type=NDR | tc14-64B-4t4c-eth-l2bdscale100kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${64} | phy_cores=${4} | search_type=PDR | tc15-1518B-4t4c-eth-l2bdscale100kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${1518} | phy_cores=${4} | search_type=NDR | tc16-1518B-4t4c-eth-l2bdscale100kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${1518} | phy_cores=${4} | search_type=PDR | tc17-9000B-4t4c-eth-l2bdscale100kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${9000} | phy_cores=${4} | search_type=NDR | tc18-9000B-4t4c-eth-l2bdscale100kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${9000} | phy_cores=${4} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-mrr.robot index a53d6b8b7b..5a4c98af6a 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results for L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,15 +55,26 @@ | ${traffic_profile} | trex-sl-3n-ethip4-macsrc5kdst5k *** Keywords *** -| Check RR for L2BD eth-l2bdscale -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| Local template +| | [Documentation] +| | ... | [CFG] DUT runs L2BD switching config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -72,148 +85,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX_v4_1 | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX_v4_1 | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | 9000B | IMIX_v4_1 -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdrdisc.robot index fbf95838eb..c770b444c6 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale10kmaclrn-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -58,8 +60,10 @@ | ${traffic_profile} | trex-sl-3n-ethip4-macsrc5kdst5k *** Keywords *** -| L2 Bridge Domain Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} +| Local template +| | [Arguments] | ${framezise} | ${phy_cores} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Set Variable If @@ -68,7 +72,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | Add PCI devices to all DUTs | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs @@ -85,182 +89,74 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2dbscale10kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-eth-l2dbscale10kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-1518B-1t1c-eth-l2dbscale10kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc04-1518B-1t1c-eth-l2dbscale10kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc05-9000B-1t1c-eth-l2dbscale10kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${1} | search_type=NDR | tc06-9000B-1t1c-eth-l2dbscale10kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-eth-l2dbscale10kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-eth-l2dbscale10kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR | tc09-1518B-2t2c-eth-l2dbscale10kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${2} | search_type=NDR | tc10-1518B-2t2c-eth-l2dbscale10kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${2} | search_type=PDR | tc11-9000B-2t2c-eth-l2dbscale10kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${2} | search_type=NDR | tc12-9000B-2t2c-eth-l2dbscale10kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${2} | search_type=PDR | tc13-64B-4t4c-eth-l2dbscale10kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 4C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${64} | phy_cores=${4} | search_type=NDR | tc14-64B-4t4c-eth-l2dbscale10kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${64} | phy_cores=${4} | search_type=PDR | tc15-1518B-4t4c-eth-l2dbscale10kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${1518} | phy_cores=${4} | search_type=NDR | tc16-1518B-4t4c-eth-l2dbscale10kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${1518} | phy_cores=${4} | search_type=PDR | tc17-9000B-4t4c-eth-l2dbscale10kmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${9000} | phy_cores=${4} | search_type=NDR | tc18-9000B-4t4c-eth-l2dbscale10kmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${9000} | phy_cores=${4} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-mrr.robot index 2b2f348915..64934b233c 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results for L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,21 +55,26 @@ | ${traffic_profile} | trex-sl-3n-ethip4-macsrc500kdst500k *** Keywords *** -| Check RR for L2BD eth-l2bdscale +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,147 +85,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-9000B-2t2c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdrdisc.robot index aa9f1bdfeb..a1072f33d6 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdscale1mmaclrn-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -58,8 +60,10 @@ | ${traffic_profile} | trex-sl-3n-ethip4-macsrc500kdst500k *** Keywords *** -| L2 Bridge Domain Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type} +| Local template +| | [Arguments] | ${framesize} | ${phy_cores} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} +| | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Set Variable If @@ -68,7 +72,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | Add PCI devices to all DUTs | | Run Keyword If | ${get_framesize} < ${1522} | Add No Multi Seg to all DUTs | | Apply startup configuration on all VPP DUTs @@ -85,182 +89,74 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdscale1mmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${1} | search_type=NDR | tc02-64B-1t1c-eth-l2bdscale1mmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${1} | search_type=PDR | tc03-1518B-1t1c-eth-l2bdscale1mmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${1} | search_type=NDR | tc04-1518B-1t1c-eth-l2bdscale1mmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${1} | search_type=PDR | tc05-9000B-1t1c-eth-l2bdscale1mmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 1C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${1} | search_type=NDR | tc06-9000B-1t1c-eth-l2bdscale1mmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${1} | search_type=PDR | tc07-64B-2t2c-eth-l2bdscale1mmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 2C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${64} | phy_cores=${2} | search_type=NDR | tc08-64B-2t2c-eth-l2bdscale1mmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${64} | phy_cores=${2} | search_type=PDR | tc09-1518B-2t2c-eth-l2bdscale1mmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${1518} | phy_cores=${2} | search_type=NDR | tc10-1518B-2t2c-eth-l2bdscale1mmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${1518} | phy_cores=${2} | search_type=PDR | tc11-9000B-2t2c-eth-l2bdscale1mmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR +| | framesize=${9000} | phy_cores=${2} | search_type=NDR | tc12-9000B-2t2c-eth-l2bdscale1mmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR +| | framesize=${9000} | phy_cores=${2} | search_type=PDR | tc13-64B-4t4c-eth-l2bdscale1mmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 64B | 4C | NDRDISC -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${64} | phy_cores=${4} | search_type=NDR | tc14-64B-4t4c-eth-l2bdscale1mmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${64} | phy_cores=${4} | search_type=PDR | tc15-1518B-4t4c-eth-l2bdscale1mmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${1518} | phy_cores=${4} | search_type=NDR | tc16-1518B-4t4c-eth-l2bdscale1mmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${1518} | phy_cores=${4} | search_type=PDR | tc17-9000B-4t4c-eth-l2bdscale1mmaclrn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 | search_type=NDR +| | framesize=${9000} | phy_cores=${4} | search_type=NDR | tc18-9000B-4t4c-eth-l2bdscale1mmaclrn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | [Template] | L2 Bridge Domain Binary Search -| | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 | search_type=PDR +| | framesize=${9000} | phy_cores=${4} | search_type=PDR diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot index 60cda67c90..eea07a639e 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -47,21 +49,26 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for l2xcbase +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -72,136 +79,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrpdrdisc.robot index dd27a66f7f..41b9c4a9fe 100644 --- a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-ndrpdrdisc.robot @@ -68,7 +68,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -89,7 +89,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -111,7 +111,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -132,7 +132,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -154,7 +154,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -174,7 +174,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -195,7 +195,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -216,7 +216,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -238,7 +238,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -259,7 +259,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -281,7 +281,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -301,7 +301,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -322,7 +322,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -343,7 +343,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -365,7 +365,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -386,7 +386,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -408,7 +408,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology @@ -428,11 +428,11 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize L2 xconnect in 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
\ No newline at end of file +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-mrr.robot index 9afd686d9a..3d2a94ed9c 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2bdbasemaclrn-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with 802.1q test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -57,22 +59,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for L2 dot1q-l2bdbasemaclrn +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with VLAN with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with VLAN with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${vlan_overhead} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -84,148 +91,49 @@ *** Test Cases *** | tc01-64B-1t1c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-dot1q-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2 dot1q-l2bdbasemaclrn -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-mrr.robot index 006267cb65..1e596508bf 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-dot1q-l2xcbase-mrr.robot @@ -21,11 +21,12 @@ | ... | L2 | Intel-X710 | Suite Teardown | Tear down 3-node performance topology | ... -| ... | Test Setup | Set up performance test | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC with 802.1q test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,21 +54,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for L2XC dot1q-l2xcbase +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with VLAN dot1q with ${wt} thread(s), \ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC config with VLAN dot1q with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -86,148 +92,49 @@ *** Test Cases *** | tc01-64B-1t1c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-dot1q-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2XC dot1q-l2xcbase -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot index 75188cb724..ebe2b9d075 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sf-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -71,21 +73,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc *** Keywords *** -| Check RR for L2BD l2bdbasemaclrn-iacl1sf +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-2t2c-eth-l2bdbasemaclrn-iacl1-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sf -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot index 14d482ce5f..326a01809b 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl1sl-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -71,21 +73,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc *** Keywords *** -| Check RR for L2BD l2bdbasemaclrn-iacl1sl +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-iacl1-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl1sl -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot index 74bc15cea1..8b56ac8431 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sf-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -71,21 +73,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc *** Keywords *** -| Check RR for L2BD l2bdbasemaclrn-iacl50sf +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-iacl50-stateful-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sf -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot index c486b38cce..ec5360b311 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot @@ -28,6 +28,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with ACL* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -71,21 +73,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc *** Keywords *** -| Check RR for L2BD l2bdbasemaclrn-iacl50sl +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ACLs with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -96,148 +103,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=1 | rxq=1 | framesize=${64} +| | phy_cores=${1} | framesize=${64} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-64B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=2 | rxq=1 | framesize=${64} +| | phy_cores=${2} | framesize=${64} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-64B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=4 | rxq=2 | framesize=${64} +| | phy_cores=${4} | framesize=${64} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-iacl50-stateless-flows10k-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ACL with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD l2bdbasemaclrn-iacl50sl -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-mrr.robot index 384c33b0e8..ce5d65badb 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -48,21 +50,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for l2bdbasemaclrn +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -73,148 +80,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot index a1c134f9c8..fd47f48974 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -56,14 +56,14 @@ *** Keywords *** | L2 Bridge Domain NDR Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} +| | [Arguments] | ${framesize} | ${phy_cores} | ${min_rate}=${50000} | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${None} | | Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -74,14 +74,14 @@ | | ... | ${min_rate} | ${max_rate} | ${threshold} | L2 Bridge Domain PDR Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} +| | [Arguments] | ${framesize} | ${phy_cores} | ${min_rate}=${50000} | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${None} | | Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -94,181 +94,91 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 +| | ... | framesize=${64} | phy_cores=${1} | | [Tags] | 64B | 1C | NDRDISC -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | tc02-64B-1t1c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 +| | ... | framesize=${64} | phy_cores=${1} | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | tc03-1518B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 +| | ... | framesize=${1518} | phy_cores=${1} | | [Tags] | 1518B | 1C | NDRDISC -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | tc04-1518B-1t1c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 +| | ... | framesize=${1518} | phy_cores=${1} | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | tc05-9000B-1t1c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 +| | ... | framesize=${9000} | phy_cores=${1} | | [Tags] | 9000B | 1C | NDRDISC -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | tc06-9000B-1t1c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1 +| | ... | framesize=${9000} | phy_cores=${1} | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 +| | ... | framesize=${64} | phy_cores=${2} | | [Tags] | 64B | 2C | NDRDISC -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | tc08-64B-2t2c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 +| | ... | framesize=${64} | phy_cores=${2} | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | tc09-1518B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 +| | ... | framesize=${1518} | phy_cores=${2} | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | tc10-1518B-2t2c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 +| | ... | framesize=${1518} | phy_cores=${2} | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | tc11-9000B-2t2c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 +| | ... | framesize=${9000} | phy_cores=${2} | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | tc12-9000B-2t2c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1 +| | ... | framesize=${9000} | phy_cores=${2} | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 +| | ... | framesize=${64} | phy_cores=${4} | | [Tags] | 64B | 4C | NDRDISC -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | tc14-64B-4t4c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 +| | ... | framesize=${64} | phy_cores=${4} | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | tc15-1518B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 +| | ... | framesize=${1518} | phy_cores=${4} | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | tc16-1518B-4t4c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 +| | ... | framesize=${1518} | phy_cores=${4} | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search | tc17-9000B-4t4c-eth-l2bdbasemaclrn-ndrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 +| | ... | framesize=${9000} | phy_cores=${4} | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. | | [Template] | L2 Bridge Domain NDR Binary Search | tc18-9000B-4t4c-eth-l2bdbasemaclrn-pdrdisc -| | ... | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2 +| | ... | framesize=${9000} | phy_cores=${4} | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. | | [Template] | L2 Bridge Domain PDR Binary Search diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-mrr.robot index c93e8dab44..3e4b5bc9ae 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale100kmaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results for L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,15 +55,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc50kdst50k *** Keywords *** -| Check RR for L2BD eth-l2bdscale -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs L2BD switching config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -72,148 +85,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdscale100kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-mrr.robot index e1af0b8389..bd636f8773 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale10kmaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results for L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,15 +55,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc5kdst5k *** Keywords *** -| Check RR for L2BD eth-l2bdscale -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| Local template +| | [Documentation] +| | ... | [CFG] DUT runs L2BD switching config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -72,148 +85,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX_v4_1 | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX_v4_1 | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2dbscale10kmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | 9000B | IMIX_v4_1 -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-mrr.robot index 7c3517eb50..7cad4b1b01 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2bdscale1mmaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results for L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,21 +55,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc500kdst500k *** Keywords *** -| Check RR for L2BD eth-l2bdscale +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -78,147 +85,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-9000B-2t2c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdscale1mmaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for L2BD eth-l2bdscale -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-mrr.robot index 29b54b17d8..0f0b0a8f0f 100644 --- a/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-mrr.robot +++ b/tests/vpp/perf/l2/10ge2p1x710-eth-l2xcbase-mrr.robot @@ -24,6 +24,8 @@ | Test Setup | Set up performance test | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -47,21 +49,26 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for l2xcbase +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with ${wt} thread(s), ${wt}\ -| | ... | phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -72,136 +79,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrpdrdisc.robot index be10b96aca..9350b66b57 100644 --- a/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -73,7 +73,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -97,7 +97,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -122,7 +122,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -146,7 +146,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -170,7 +170,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -194,7 +194,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -219,7 +219,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -243,7 +243,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -267,7 +267,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -292,7 +292,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -317,7 +317,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -342,7 +342,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot index 195168e657..4003ae0142 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -52,23 +54,28 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for l2bdbasemaclrn +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} | | ${max_rate}= | Set Variable If | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -81,148 +88,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for l2bdbasemaclrn -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot index 2f2ea98fe4..3d16103d19 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2bdbasemaclrn-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -58,15 +60,15 @@ *** Keywords *** | L2 Bridge Domain Binary Search BW limit -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} -| | ... | ${search_type} +| | [Arguments] | ${framesize} | ${phy_cores} | ${s_limit} +| | ... | ${search_type} | ${min_rate}=${50000} | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${None} | | Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -85,15 +87,15 @@ | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} | L2 Bridge Domain Binary Search -| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} -| | ... | ${search_type} +| | [Arguments] | ${framesize} | ${phy_cores} | ${s_limit} +| | ... | ${search_type} | ${min_rate}=${50000} | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${max_rate}= | Set Variable | ${s_limit} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${None} | | Add PCI devices to all DUTs | | ${get_framesize}= | Get Frame Size | ${framesize} | | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs @@ -120,7 +122,7 @@ | | ... | 18.75Mpps rate, step 50kpps. | | [Tags] | 64B | 1C | NDRDISC | | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | | ... | s_limit=${s_18.75Mpps} | search_type=NDR | tc03-1518B-1t1c-eth-l2bdbasemaclrn-ndrdisc @@ -131,7 +133,7 @@ | | ... | 24.5G rate, step 50kpps. | | [Tags] | 1518B | 1C | NDRDISC | | [Template] | L2 Bridge Domain Binary Search BW limit -| | framesize=${1518} | min_rate=${50000} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | | ... | s_limit=${s_24.5G} | search_type=NDR | tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc @@ -142,7 +144,7 @@ | | ... | 18.75Mpps rate, step 50kpps. | | [Tags] | 64B | 2C | NDRDISC | | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | | ... | s_limit=${s_18.75Mpps} | search_type=NDR | tc09-1518B-2t2c-eth-l2bdbasemaclrn-ndrdisc @@ -153,7 +155,7 @@ | | ... | 24.5G rate, step 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search BW limit -| | framesize=${1518} | min_rate=${50000} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | | ... | s_limit=${s_24.5G} | search_type=NDR | tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc @@ -164,7 +166,7 @@ | | ... | 18.75Mpps rate, step 50kpps. | | [Tags] | 64B | 4C | NDRDISC | | [Template] | L2 Bridge Domain Binary Search -| | framesize=${64} | min_rate=${50000} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | | ... | s_limit=${s_18.75Mpps} | search_type=NDR | tc15-1518B-4t4c-eth-l2bdbasemaclrn-ndrdisc @@ -175,7 +177,7 @@ | | ... | 24.5G rate, step 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search BW limit -| | framesize=${1518} | min_rate=${50000} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | | ... | s_limit=${s_24.5G} | search_type=NDR | tc19-IMIX-1t1c-eth-l2bdbasemaclrn-ndrdisc @@ -186,7 +188,7 @@ | | ... | 24.5G rate, step 50kpps. | | [Tags] | IMIX | 1C | NDRDISC | | [Template] | L2 Bridge Domain Binary Search BW limit -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | | ... | s_limit=${s_24.5G} | search_type=NDR | tc20-IMIX-2t2c-eth-l2bdbasemaclrn-ndrdisc @@ -197,7 +199,7 @@ | | ... | 24.5G rate, step 50kpps. | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search BW limit -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | | ... | s_limit=${s_24.5G} | search_type=NDR | tc21-IMIX-4t4c-eth-l2bdbasemaclrn-ndrdisc @@ -208,6 +210,6 @@ | | ... | 24.5G rate, step 50kpps. | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH | | [Template] | L2 Bridge Domain Binary Search BW limit -| | framesize=IMIX_v4_1 | min_rate=${50000} | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} | | ... | s_limit=${s_24.5G} | search_type=NDR diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-mrr.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-mrr.robot index 65db8c4393..f6e7da49fb 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-mrr.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-mrr.robot @@ -27,6 +27,8 @@ | ... | Test Teardown | Tear down performance mrr test | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -53,23 +55,28 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for l2xcbase +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC config with ${wt} thread(s),\ -| | ... | ${wt} phy core(s), ${rxq} receive queue(s) per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} | | ${max_rate}= | Set Variable If | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -83,148 +90,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy core, \ -| | ... | 1 receive queue per NIC port.. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 thread, 4 phy core, \ -| | ... | 2 receive queue per NIC port.. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for l2xcbase -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot index 54a2de44e6..e4acddfcb5 100644 --- a/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot +++ b/tests/vpp/perf/l2/40ge2p1xl710-eth-l2xcbase-ndrpdrdisc.robot @@ -70,7 +70,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -93,7 +93,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -116,7 +116,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -139,7 +139,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -162,7 +162,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -185,7 +185,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -209,7 +209,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -233,7 +233,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 @@ -257,7 +257,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Add DPDK dev default RXD to all DUTs | 2048 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot index 86f3b2d826..1a42090412 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down mrr test with SRv6 with encapsulation | ... +| Test Template | Local template +| ... | Documentation | *Raw results for Segment routing over IPv6 dataplane with\ | ... | one SID (SRH not inserted) test cases* | ... @@ -72,17 +74,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Check RR for IPv6 routing over SRv6 +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${srv6_overhead_nosrh} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -92,148 +104,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6ip6-ip6base-srv6enc1sid-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot index d13c07cc85..eef92a22b6 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6ip6-ip6base-srv6enc1sid-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | Test Teardown | Tear down performance test with SRv6 with encapsulation | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ | ... | one SID (SRH not inserted) test cases* | ... @@ -77,9 +79,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Discover NDR or PDR for IPv6 routing over SRv6 -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -89,7 +91,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -106,145 +108,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${78} | search_type=NDR | tc02-78B-1t1c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${78} | search_type=PDR | tc03-78B-2t2c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${78} | search_type=NDR | tc04-78B-2t2c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${78} | search_type=PDR | tc05-78B-4t4c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${78} | search_type=NDR | tc06-78B-4t4c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${78} | search_type=PDR | tc07-1518B-1t1c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc08-1518B-1t1c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc09-1518B-2t2c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-1518B-4t4c-ethip6ip6-ip6base-srv6enc1sid-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc12-1518B-4t4c-ethip6ip6-ip6base-srv6enc1sid-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot index 4335844135..51af0b1f7a 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down mrr test with SRv6 with encapsulation | ... +| Test Template | Local template +| ... | Documentation | *Raw results for Segment routing over IPv6 dataplane with\ | ... | two SIDs (SRH inserted) test cases* | ... @@ -75,17 +77,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Check RR for IPv6 routing over SRv6 +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${srv6_overhead_2sids} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -95,148 +107,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6enc2sids-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot index cf57558f2d..68f1bc4780 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | Test Teardown | Tear down performance test with SRv6 with encapsulation | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ | ... | two SIDs (SRH inserted) test cases* | ... @@ -80,9 +82,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Discover NDR or PDR for IPv6 routing over SRv6 -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -92,7 +94,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -109,145 +111,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${78} | search_type=NDR | tc02-78B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${78} | search_type=PDR | tc03-78B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${78} | search_type=NDR | tc04-78B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${78} | search_type=PDR | tc05-78B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${78} | search_type=NDR | tc06-78B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${78} | search_type=PDR | tc07-1518B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc08-1518B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc09-1518B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-1518B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc12-1518B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot index 0a6773015f..fd1139faea 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr.robot @@ -25,6 +25,8 @@ | ... | Test Teardown | Tear down mrr test with SRv6 with encapsulation | ... +| Test Template | Local template +| ... | Documentation | *Raw results for Segment routing over IPv6 dataplane with\ | ... | two SIDs (SRH inserted) without decapsulation test cases* | ... @@ -74,17 +76,27 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Check RR for IPv6 routing over SRv6 +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${srv6_overhead_2sids} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -94,148 +106,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot index 80d1c7383f..af17be5fd3 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | Test Teardown | Tear down performance test with SRv6 with encapsulation | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ | ... | two SIDs (SRH inserted) without decapsulation test cases* | ... @@ -79,9 +81,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253 *** Keywords *** -| Discover NDR or PDR for IPv6 routing over SRv6 -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -91,7 +93,7 @@ | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -108,145 +110,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${78} | search_type=NDR | tc02-78B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${78} | search_type=PDR | tc03-78B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${78} | search_type=NDR | tc04-78B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${78} | search_type=PDR | tc05-78B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${78} | search_type=NDR | tc06-78B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${78} | search_type=PDR | tc07-1518B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc08-1518B-1t1c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc09-1518B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-1518B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc12-1518B-4t4c-ethip6srhip6-ip6base-srv6enc2sids-nodecaps-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot index cafe8c6a28..d6f3a84999 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-mrr.robot @@ -31,6 +31,8 @@ | ... | Test Teardown | Tear down mrr test with SRv6 with encapsulation | ... +| Test Template | Local template +| ... | Documentation | *Raw results for Segment routing over IPv6 dataplane with\ | ... | Dynamic SRv6 proxy test cases* | ... @@ -98,18 +100,27 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} -| | Set Test Variable | ${rxq} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${srv6_overhead_3sids} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs @@ -120,148 +131,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot index 2356103766..a50f6a33cc 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-dyn-ndrpdrdisc.robot @@ -32,6 +32,8 @@ | Test Teardown | Tear down performance test with SRv6 with encapsulation | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ | ... | Dynamic SRv6 proxy test cases* | ... @@ -103,20 +105,19 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} -| | Set Test Variable | ${rxq} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${srv6_overhead_3sids} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs @@ -134,145 +135,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${78} | search_type=NDR | tc02-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${78} | search_type=PDR | tc03-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${78} | search_type=NDR | tc04-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${78} | search_type=PDR | tc05-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${78} | search_type=NDR | tc06-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${78} | search_type=PDR | tc07-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc08-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-dyn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc09-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-dyn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc12-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-dyn-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with dynamic SRv6 proxy config\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via dynamic proxy behaviour -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot index 0acf9f70f8..f49fc852b4 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-mrr.robot @@ -31,6 +31,8 @@ | ... | Test Teardown | Tear down mrr test with SRv6 with encapsulation | ... +| Test Template | Local template +| ... | Documentation | *Raw results for Segment routing over IPv6 dataplane with\ | ... | Masquerading SRv6 proxy test cases* | ... @@ -98,18 +100,27 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} -| | Set Test Variable | ${rxq} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${srv6_overhead_3sids} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs @@ -120,148 +131,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot index 42be3f9f3f..7066f619b7 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdrdisc.robot @@ -32,6 +32,8 @@ | Test Teardown | Tear down performance test with SRv6 with encapsulation | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ | ... | Masquerading SRv6 proxy test cases* | ... @@ -103,20 +105,19 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} -| | Set Test Variable | ${rxq} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${srv6_overhead_3sids} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs @@ -134,145 +135,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${78} | search_type=NDR | tc02-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${78} | search_type=PDR | tc03-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${78} | search_type=NDR | tc04-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${78} | search_type=PDR | tc05-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${78} | search_type=NDR | tc06-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${78} | search_type=PDR | tc07-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc08-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-masq-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc09-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-masq-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc12-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-masq-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with masquerading SRv6 proxy\ -| | ... | config with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via masquerading proxy behaviour -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot index 661d3df8c4..0be9ccda27 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-mrr.robot @@ -31,6 +31,8 @@ | ... | Test Teardown | Tear down mrr test with SRv6 with encapsulation | ... +| Test Template | Local template +| ... | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ | ... | Static SRv6 proxy test cases* | ... @@ -98,18 +100,27 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour +| Local template +| | [Documentation] +| | ... | [Cfg] DUT runs IPv6 over SRv6 routing config with ${phy_cores} phy +| | ... | core(s). +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ +| | ... | trial throughput test. +| | ... +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer | | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} +| | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None} | | ... -| | # Test Variables required for test teardown | | Set Test Variable | ${framesize} -| | Set Test Variable | ${rxq} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${srv6_overhead_3sids} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs @@ -120,148 +131,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=1 | rxq=1 | framesize=${78} +| | phy_cores=${1} | framesize=${78} | tc02-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=1 | rxq=1 | framesize=${1518} +| | phy_cores=${1} | framesize=${1518} | tc03-9000B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=1 | rxq=1 | framesize=${9000} +| | phy_cores=${1} | framesize=${9000} | tc04-IMIX-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${1} | framesize=IMIX_v4_1 | tc05-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=2 | rxq=1 | framesize=${78} +| | phy_cores=${2} | framesize=${78} | tc06-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=2 | rxq=1 | framesize=${1518} +| | phy_cores=${2} | framesize=${1518} | tc07-9000B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=2 | rxq=1 | framesize=${9000} +| | phy_cores=${2} | framesize=${9000} | tc08-IMIX-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 +| | phy_cores=${2} | framesize=IMIX_v4_1 | tc09-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 78B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 78B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=4 | rxq=2 | framesize=${78} +| | phy_cores=${4} | framesize=${78} | tc10-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=4 | rxq=2 | framesize=${1518} +| | phy_cores=${4} | framesize=${1518} | tc11-9000B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\ -| | ... | throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=4 | rxq=2 | framesize=${9000} +| | phy_cores=${4} | framesize=${9000} | tc12-IMIX-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\ -| | ... | throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 +| | phy_cores=${4} | framesize=IMIX_v4_1 diff --git a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot index 5d42cd2555..b17d023b73 100644 --- a/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot +++ b/tests/vpp/perf/srv6/10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdrdisc.robot @@ -32,6 +32,8 @@ | Test Teardown | Tear down performance test with SRv6 with encapsulation | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... +| Test Template | Local template +| ... | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\ | ... | Static SRv6 proxy test cases* | ... @@ -103,20 +105,19 @@ | ${container_cpus}= | ${5} *** Keywords *** -| Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} +| | ... | ${min_rate}=${50000} | ${rxq}=${None} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} -| | Set Test Variable | ${rxq} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | | ... | ${get_framesize} + ${srv6_overhead_3sids} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} + ${srv6_overhead_3sids} < ${1522} | | ... | Add no multi seg to all DUTs @@ -134,145 +135,49 @@ *** Test Cases *** | tc01-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${78} | search_type=NDR | tc02-78B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=1 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${78} | search_type=PDR | tc03-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${78} | search_type=NDR | tc04-78B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=2 | rxq=1 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${78} | search_type=PDR | tc05-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 78B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${78} | search_type=NDR | tc06-78B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 78 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 78B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=4 | rxq=2 | framesize=${78} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${78} | search_type=PDR | tc07-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-ndrdisc -| | [Documentation] -| | ... | [[Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc08-1518B-1t1c-ethip6srhip6-ip6base-srv6proxy-stat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 1 phy core, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc09-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip6srhip6-ip6base-srv6proxy-stat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 2 phy cores, 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc12-1518B-4t4c-ethip6srhip6-ip6base-srv6proxy-stat-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv6 over SRv6 routing with static SRv6 proxy config\ -| | ... | with 4 phy cores, 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 50kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv6 routing over SRv6 with endpoint to SR-unaware Service Function via static proxy behaviour -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${50000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR diff --git a/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot b/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot index c900d52cf4..f5dd934ed4 100644 --- a/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot +++ b/tests/vpp/perf/tcp/10ge2p1x520-ethip4tcphttp-httpserver.robot @@ -26,6 +26,8 @@ | Test Setup | Set up tcp performance test | Test Teardown | Tear down performance test with wrk | ... +| Test Template | Local template +| ... | Documentation | *HTTP requests per seconds, connections per seconds and | ... | throughput measurement.* | ... @@ -37,10 +39,11 @@ | ... | *[Ref] Applicable standard specifications:* *** Keywords *** -| Measure throughput or rps or cps -| | [Arguments] | ${traffic_profile} | ${wt} | ${rxq} | ${test_type} +| Local template +| | [Arguments] | ${traffic_profile} | ${phy_cores} | ${test_type} +| | ... | ${rxq}=${None} | | ... -| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | Add PCI devices to all DUTs | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} @@ -81,9 +84,7 @@ | | ... | Measure number of connections per second using wrk. | | ... | | [Tags] | 1C | TCP_CPS -| | ... -| | [Template] | Measure throughput or rps or cps -| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-cps | wt=1 | rxq=1 +| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-cps | phy_cores=${1} | | ... | test_type=cps | tc02-2t2c-ethip4tcphttp-httpserver-cps @@ -91,9 +92,7 @@ | | ... | Measure number of connections per second using wrk. | | ... | | [Tags] | 2C | TCP_CPS -| | ... -| | [Template] | Measure throughput or rps or cps -| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-cps | wt=2 | rxq=2 +| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-cps | phy_cores=${2} | | ... | test_type=cps | tc03-4t4c-ethip4tcphttp-httpserver-cps @@ -101,9 +100,7 @@ | | ... | Measure number of connections per second using wrk. | | ... | | [Tags] | 4C | TCP_CPS -| | ... -| | [Template] | Measure throughput or rps or cps -| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-cps | wt=4 | rxq=4 +| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-cps | phy_cores=${4} | | ... | test_type=cps | tc04-1t1c-ethip4tcphttp-httpserver-rps @@ -111,9 +108,7 @@ | | ... | Measure and report number of requests per second using wrk. | | ... | | [Tags] | 1C | TCP_RPS -| | ... -| | [Template] | Measure throughput or rps or cps -| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-rps | wt=1 | rxq=1 +| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-rps | phy_cores=${1} | | ... | test_type=rps | tc05-2t2c-ethip4tcphttp-httpserver-rps @@ -121,9 +116,7 @@ | | ... | Measure and report number of requests per second using wrk. | | ... | | [Tags] | 2C | TCP_RPS -| | ... -| | [Template] | Measure throughput or rps or cps -| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-rps | wt=2 | rxq=2 +| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-rps | phy_cores=${2} | | ... | test_type=rps | tc06-4t4c-ethip4tcphttp-httpserver-rps @@ -131,7 +124,5 @@ | | ... | Measure and report number of requests per second using wrk. | | ... | | [Tags] | 4C | TCP_RPS -| | ... -| | [Template] | Measure throughput or rps or cps -| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-rps | wt=4 | rxq=4 +| | traffic_profile=wrk-sf-2n-ethip4tcphttp-8u8c50con-rps | phy_cores=${4} | | ... | test_type=rps diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 451d45a00e..053db0e745 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost and dpdk link bonding* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -71,16 +73,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} @@ -92,7 +99,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology @@ -116,148 +123,49 @@ *** Test Cases *** | tc01-64B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 19335dfe0b..46ae2f46e8 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost and | ... | dpdk link bonding* | ... @@ -79,16 +81,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Discover NDR or PDR for ${framesize} frames using xxx\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -104,7 +100,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology @@ -135,295 +131,97 @@ *** Test Cases *** | tc01-64B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-IMIX-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc08-IMIX-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc09-64B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc10-64B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc11-1518B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc12-1518B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc13-9000B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc14-9000B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc15-IMIX-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc16-IMIX-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc17-64B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc18-64B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc19-1518B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc20-1518B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc21-9000B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc22-9000B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR | tc23-IMIX-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc24-IMIX-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 6c0b6bee46..01f174ff36 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost and dpdk link bonding* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -69,16 +71,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} @@ -90,7 +97,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology @@ -113,148 +120,49 @@ *** Test Cases *** | tc01-64B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 7d567743af..5c16dc3181 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2XC test cases with vhost and | ... | dpdk link bonding* | ... @@ -79,16 +81,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -104,7 +100,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology @@ -134,295 +130,97 @@ *** Test Cases *** | tc01-64B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-IMIX-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc08-IMIX-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc09-64B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc10-64B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc11-1518B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc12-1518B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc13-9000B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc14-9000B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc15-IMIX-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc16-IMIX-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc17-64B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc18-64B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc19-1518B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc20-1518B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc21-9000B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc22-9000B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR | tc23-IMIX-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc24-IMIX-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 7b0b7eeabe..4032a0a012 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -32,6 +32,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost and vpp link bonding* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -74,16 +76,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} @@ -95,7 +102,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} @@ -118,148 +125,49 @@ *** Test Cases *** | tc01-64B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index dfa87cdf06..c608565e4f 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -32,6 +32,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost and | ... | vpp link bonding* | ... @@ -81,16 +83,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Discover NDR or PDR for ${framesize} frames using xxx\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -106,7 +102,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} @@ -136,295 +132,97 @@ *** Test Cases *** | tc01-64B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-IMIX-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc08-IMIX-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc09-64B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc10-64B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc11-1518B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc12-1518B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc13-9000B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc14-9000B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc15-IMIX-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc16-IMIX-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc17-64B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc18-64B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc19-1518B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc20-1518B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc21-9000B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc22-9000B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR | tc23-IMIX-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc24-IMIX-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 1970f1a731..4a7ffd3735 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -31,6 +31,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost and vpp link bonding* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -71,16 +73,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} @@ -92,7 +99,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} @@ -115,148 +122,49 @@ *** Test Cases *** | tc01-64B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 680be414bb..a42443ce5d 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -32,6 +32,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2XC test cases with vhost and | ... | vpp link bonding* | ... @@ -81,16 +83,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -106,7 +102,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} @@ -136,295 +132,97 @@ *** Test Cases *** | tc01-64B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-IMIX-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc08-IMIX-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc09-64B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc10-64B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc11-1518B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc12-1518B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc13-9000B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc14-9000B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc15-IMIX-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc16-IMIX-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc17-64B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc18-64B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc19-1518B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc20-1518B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc21-9000B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc22-9000B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR | tc23-IMIX-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc24-IMIX-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 41cfa3e482..a4da58c919 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -65,16 +67,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -85,7 +92,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -106,148 +113,49 @@ *** Test Cases *** | tc01-64B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 453c9435b1..49971c4a3b 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -89,7 +89,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -123,7 +123,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -158,7 +158,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -192,7 +192,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -229,7 +229,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -265,7 +265,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -300,7 +300,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -334,7 +334,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -369,7 +369,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -403,7 +403,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -440,7 +440,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -476,7 +476,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -511,7 +511,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -545,7 +545,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -580,7 +580,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -614,7 +614,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -651,7 +651,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -687,7 +687,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 73055733ba..ab465feaf9 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,16 +64,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config with. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -82,7 +89,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -102,148 +109,49 @@ *** Test Cases *** | tc01-64B-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 532d633b1b..1dd4cacc9b 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -86,7 +86,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -119,7 +119,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -153,7 +153,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -186,7 +186,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -222,7 +222,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -257,7 +257,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -291,7 +291,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -324,7 +324,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -358,7 +358,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -391,7 +391,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -427,7 +427,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -462,7 +462,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -496,7 +496,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -529,7 +529,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -563,7 +563,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -596,7 +596,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -632,7 +632,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -667,7 +667,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index e175c4873a..04c05e5efa 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -72,8 +74,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${use_tuned_cfs} | ${True} | | Set Test Variable | ${framesize} @@ -89,7 +92,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -114,223 +117,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-etc-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 3bd8a5ef4d..7a69383e0f 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,16 +64,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -82,7 +89,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -102,148 +109,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc10-9000B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot index 65903a9b31..b822676e2d 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot @@ -55,7 +55,7 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... -| Test Template | Find NDRPDR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Test Template | Local template *** Variables *** | ${perf_qemu_qsz}= | 1024 @@ -71,16 +71,14 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Find NDRPDR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. +| | ... | [Cfg] DUT runs L2BD switching config with ${phy_cores} phy cores. | | ... | [Ver] Find NDR for ${framesize} frames \ | | ... | using binary search start at 10GE linerate. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_unidirectional_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -92,7 +90,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -113,60 +111,48 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | 64B | 1C -| | ... -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 1C -| | ... -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 1C -| | ... -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 1C -| | ... -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | 64B | 2C -| | ... -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 2C -| | ... -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 2C -| | ... -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 2C -| | ... -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | 64B | 4C -| | ... -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | 1518B | 4C -| | ... -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | 9000B | 4C -| | ... -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr | | [Tags] | IMIX | 4C -| | ... -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 0dd7ed6468..7f5a6ec903 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -82,7 +82,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -112,7 +112,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -143,7 +143,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -173,7 +173,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -205,7 +205,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -236,7 +236,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -267,7 +267,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -297,7 +297,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -328,7 +328,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -358,7 +358,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -390,7 +390,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -421,7 +421,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -452,7 +452,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -482,7 +482,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -513,7 +513,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -543,7 +543,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -575,7 +575,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -606,7 +606,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot index ad72f0794b..c0fdcbcb96 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -72,22 +74,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with required number of threads,\ -| | ... | phy cores and receive queues per NIC port. -| | ... | [Ver] Find NDR or PDR for defined frame size using binary search\ -| | ... | start at 10GE linerate with specified step. -| | ... -| | ... | *Arguments:* -| | ... | - wt - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - search_type - Type of the search - non drop rate (NDR) or partial -| | ... | drop rare (PDR). Type: string +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${use_tuned_cfs} | ${True} | | Set Test Variable | ${framesize} @@ -103,7 +92,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -128,223 +117,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-etc-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot index 3d651fdafc..eafd275085 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,16 +64,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -82,7 +89,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -102,148 +109,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot index d92bffe18c..c2e65ea7ad 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -70,22 +72,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with required number of threads,\ -| | ... | phy cores and receive queues per NIC port. -| | ... | [Ver] Find NDR or PDR for defined frame size using binary search\ -| | ... | start at 10GE linerate with specified step. -| | ... -| | ... | *Arguments:* -| | ... | - wt - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - search_type - Type of the search - non drop rate (NDR) or partial -| | ... | drop rare (PDR). Type: string +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -100,7 +89,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -124,223 +113,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-etc-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot index aae10f1a86..dd9b38c659 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -60,16 +62,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -81,7 +88,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -93,148 +100,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index 60f3d1ff55..fcae29a286 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -26,6 +26,8 @@ | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -65,16 +67,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Find NDR for ${framesize} frames using binary search start at -| | ... | 10GE linerate, step 10kpps. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -90,7 +86,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -109,223 +105,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index b8ea2ff974..18c724e070 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -75,8 +77,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc50kdst50k *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${use_tuned_cfs} | ${True} | | Set Test Variable | ${framesize} @@ -92,7 +95,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -117,223 +120,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-etc-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2dbscale100kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index ee220e8db6..ad01f900d6 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -75,8 +77,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4-macsrc5kdst5k *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${use_tuned_cfs} | ${True} | | Set Test Variable | ${framesize} @@ -92,7 +95,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -117,223 +120,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-etc-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2dbscale10kmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index 61d676197b..ce0ea381ad 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2bdscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -75,8 +77,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-macsrc500kdst500k *** Keywords *** -| Discover NDR or PDR for L2 Bridge Domain with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${use_tuned_cfs} | ${True} | | Set Test Variable | ${framesize} @@ -92,7 +95,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -117,223 +120,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-etc-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2dbscale1mmaclrn-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 Bridge Domain with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index b562789e8a..a07647c942 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -69,8 +71,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for L2 xconnect with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${use_tuned_cfs} | ${True} | | Set Test Variable | ${framesize} @@ -86,7 +89,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -111,223 +114,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-etc-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index b7a5d204d6..696b32d95d 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -59,16 +61,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -79,7 +86,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -99,148 +106,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index a3b0b7a77b..629f17e81c 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -78,7 +78,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -108,7 +108,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -139,7 +139,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -169,7 +169,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -201,7 +201,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -232,7 +232,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -263,7 +263,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -293,7 +293,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -324,7 +324,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -354,7 +354,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -386,7 +386,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -417,7 +417,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -448,7 +448,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -478,7 +478,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -509,7 +509,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -539,7 +539,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -571,7 +571,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -602,7 +602,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot index 016e89e151..567c0b3399 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -69,22 +71,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for L2 xconnect with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with required number of threads,\ -| | ... | phy cores and receive queues per NIC port. -| | ... | [Ver] Find NDR or PDR for defined frame size using binary search\ -| | ... | start at 10GE linerate with specified step. -| | ... -| | ... | *Arguments:* -| | ... | - wt - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - search_type - Type of the search - non drop rate (NDR) or partial -| | ... | drop rare (PDR). Type: string +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${use_tuned_cfs} | ${True} | | Set Test Variable | ${framesize} @@ -100,7 +89,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -125,223 +114,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-etc-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot index fa37102973..f0e13ac986 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -59,16 +61,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2xcbase-eth-2vhostvr256-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -79,7 +86,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -99,148 +106,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot index 2857f8e29f..1e84646d93 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-2vhostvr256-1vm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -67,22 +69,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for L2 xconnect with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with required number of threads,\ -| | ... | phy cores and receive queues per NIC port. -| | ... | [Ver] Find NDR or PDR for defined frame size using binary search\ -| | ... | start at 10GE linerate with specified step. -| | ... -| | ... | *Arguments:* -| | ... | - wt - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - search_type - Type of the search - non drop rate (NDR) or partial -| | ... | drop rare (PDR). Type: string +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -97,7 +86,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -121,223 +110,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-etc-l2xcbase-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for L2 xconnect with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot index db3dfa674d..65f775d666 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -60,16 +62,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -81,7 +88,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -93,148 +100,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index ed25aa56f5..e139db35e1 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -66,16 +68,10 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Find NDR for ${framesize} frames using binary search start at -| | ... | 10GE linerate, step 10kpps. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -91,7 +87,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -110,223 +106,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot index f21fafc456..589dd17490 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -72,8 +74,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Discover NDR or PDR for IPv4 forwarding with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${use_tuned_cfs} | ${True} | | Set Test Variable | ${framesize} @@ -89,7 +92,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -116,223 +119,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-etc-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot index 771fa916e1..b28c29331e 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,16 +64,21 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} @@ -82,7 +89,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -102,148 +109,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index cb6bbf2b94..5c8cf6f84f 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -81,7 +81,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -113,7 +113,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -146,7 +146,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -178,7 +178,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -212,7 +212,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -245,7 +245,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -278,7 +278,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -310,7 +310,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -343,7 +343,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -375,7 +375,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -409,7 +409,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -442,7 +442,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -475,7 +475,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -507,7 +507,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -540,7 +540,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -572,7 +572,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -606,7 +606,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -639,7 +639,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot index bf8bc80e7a..47fa40f069 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IP4 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -72,8 +74,9 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Discover NDR or PDR for IPv4 forwarding with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | [Documentation] | | ... | [Cfg] DUT runs IP4 routing config with required number of threads,\ @@ -103,7 +106,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -130,223 +133,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c--ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot index c8bff20643..92d31abe7a 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,16 +64,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for eth-ip4base-eth-2vhostvr256-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config with. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -82,7 +89,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -102,148 +109,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot index 3e02e56624..86c1fd8132 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IP4 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -70,22 +72,9 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Discover NDR or PDR for IPv4 forwarding with VM -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} -| | ... -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with required number of threads,\ -| | ... | phy cores and receive queues per NIC port. -| | ... | [Ver] Find NDR or PDR for defined frame size using binary search\ -| | ... | start at 10GE linerate with specified step. -| | ... -| | ... | *Arguments:* -| | ... | - wt - Number of worker threads to be used. Type: integer -| | ... | - rxq - Number of Rx queues to be used. Type: integer -| | ... | - framesize - L2 Frame Size [B]. Type: integer -| | ... | - min_rate - Lower limit of search [pps]. Type: float -| | ... | - search_type - Type of the search - non drop rate (NDR) or partial -| | ... | drop rare (PDR). Type: string +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} @@ -100,7 +89,7 @@ | | ${dut2_vm_refs}= | Create Dictionary | | Set Test Variable | ${dut1_vm_refs} | | Set Test Variable | ${dut2_vm_refs} -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -126,223 +115,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VM -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot index 24a22ffd68..95455d022f 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -66,16 +68,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} @@ -87,7 +94,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -99,148 +106,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index 9c210badd0..3b9959f439 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -67,16 +69,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Find NDR for ${framesize} frames using binary search start at -| | ... | 10GE linerate, step 10kpps. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -92,7 +88,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -111,223 +107,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 50ebc956cb..ddf22b6cc3 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with VXLANoIPv4 | ... | and vhost* | ... @@ -66,16 +68,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} @@ -87,7 +94,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -107,148 +114,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 0976e69f11..8ede0cf687 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -89,7 +89,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -122,7 +122,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -156,7 +156,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -188,7 +188,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -223,7 +223,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -257,7 +257,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -290,7 +290,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -323,7 +323,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -357,7 +357,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -389,7 +389,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -424,7 +424,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -458,7 +458,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -491,7 +491,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -524,7 +524,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -558,7 +558,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -590,7 +590,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -625,7 +625,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology @@ -659,7 +659,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 1a6af04e33..2e46ee0976 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost and dpdk link bonding* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -71,16 +73,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} @@ -92,7 +99,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology @@ -116,148 +123,49 @@ *** Test Cases *** | tc01-64B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 0a826c11cf..eba40b9017 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost and | ... | dpdk link bonding* | ... @@ -79,16 +81,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Discover NDR or PDR for ${framesize} frames using xxx\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -104,7 +100,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology @@ -135,295 +131,97 @@ *** Test Cases *** | tc01-64B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-IMIX-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc08-IMIX-1t1c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc09-64B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc10-64B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc11-1518B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc12-1518B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc13-9000B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc14-9000B-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc15-IMIX-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc16-IMIX-2t2c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc17-64B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc18-64B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc19-1518B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc20-1518B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc21-9000B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc22-9000B-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR | tc23-IMIX-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc24-IMIX-4t4c-1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 71f0b295f0..832e9e274a 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost and dpdk link bonding* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -69,16 +71,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} @@ -90,7 +97,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology @@ -113,148 +120,49 @@ *** Test Cases *** | tc01-64B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 85ed75e7d6..1ea5dd55e0 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2XC test cases with vhost and | ... | dpdk link bonding* | ... @@ -79,16 +81,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -104,7 +100,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Add DPDK bonded Ethernet interfaces to DUTs in 3-node single link topology @@ -134,295 +130,97 @@ *** Test Cases *** | tc01-64B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-IMIX-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc08-IMIX-1t1c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc09-64B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc10-64B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc11-1518B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc12-1518B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc13-9000B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc14-9000B-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc15-IMIX-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc16-IMIX-2t2c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc17-64B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc18-64B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc19-1518B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc20-1518B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc21-9000B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc22-9000B-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR | tc23-IMIX-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc24-IMIX-4t4c-1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbdpdk-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 4f205d00a5..c712df4d73 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -32,6 +32,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost and vpp link bonding* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -74,16 +76,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} @@ -95,7 +102,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} @@ -118,148 +125,49 @@ *** Test Cases *** | tc01-64B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 527ec6f3e9..ba1a74eb0e 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -32,6 +32,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost and | ... | vpp link bonding* | ... @@ -81,16 +83,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Discover NDR or PDR for ${framesize} frames using xxx\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -106,7 +102,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} @@ -136,295 +132,97 @@ *** Test Cases *** | tc01-64B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-IMIX-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc08-IMIX-1t1c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc09-64B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc10-64B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc11-1518B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc12-1518B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc13-9000B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc14-9000B-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc15-IMIX-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc16-IMIX-2t2c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc17-64B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc18-64B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc19-1518B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc20-1518B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc21-9000B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc22-9000B-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR | tc23-IMIX-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc24-IMIX-4t4c-1lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index d13b01015d..eac5a35a2f 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -31,6 +31,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost and vpp link bonding* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -71,16 +73,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} @@ -92,7 +99,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} @@ -115,148 +122,49 @@ *** Test Cases *** | tc01-64B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index 67d92170cd..c2e9bd9583 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -32,6 +32,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2XC test cases with vhost and | ... | vpp link bonding* | ... @@ -81,16 +83,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ -| | ... | trial throughput test. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -106,7 +102,7 @@ | | ${jumbo_frames}= | Set Variable If | | ... | ${get_framesize + ${vlan_overhead}} < ${1522} | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | And Run Keyword If | ${get_framesize + ${vlan_overhead}} < ${1522} @@ -136,295 +132,97 @@ *** Test Cases *** | tc01-64B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC | TEST -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-9000B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${9000} | search_type=NDR | tc06-9000B-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${9000} | search_type=PDR | tc07-IMIX-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc08-IMIX-1t1c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc09-64B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc10-64B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc11-1518B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc12-1518B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc13-9000B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${9000} | search_type=NDR | tc14-9000B-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${9000} | search_type=PDR | tc15-IMIX-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc16-IMIX-2t2c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc17-64B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc18-64B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc19-1518B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc20-1518B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc21-9000B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps. -| | ... | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${9000} | search_type=NDR | tc22-9000B-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\ -| | ... | linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=${9000} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${9000} | search_type=PDR | tc23-IMIX-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc24-IMIX-4t4c-1lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 framesize using binary search start at\ -| | ... | 10GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for 1lbvpp-dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 5f9ca6979f..8c795fa76d 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -65,16 +67,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -85,7 +92,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -106,148 +113,49 @@ *** Test Cases *** | tc01-64B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index dad126c76e..da3dc137bb 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,16 +64,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -82,7 +89,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -102,148 +109,49 @@ *** Test Cases *** | tc01-64B-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-dot1q-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for dot1q-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index f9605a335d..baab00384c 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -84,7 +84,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -116,7 +116,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -149,7 +149,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -181,7 +181,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -215,7 +215,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -248,7 +248,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -280,7 +280,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -312,7 +312,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -345,7 +345,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -377,7 +377,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -411,7 +411,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -444,7 +444,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -477,7 +477,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -509,7 +509,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -542,7 +542,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -574,7 +574,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -608,7 +608,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -641,7 +641,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot index 02eb8e5e97..b8332bb58d 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,16 +64,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -82,7 +89,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -102,148 +109,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot index 891eb9ba9a..d6c867d9d2 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -60,16 +62,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -81,7 +88,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -93,148 +100,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot index 9fa57ca686..2768a44d2f 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -59,16 +61,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -79,7 +86,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -99,148 +106,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot index 14950a2e34..e3c852e511 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-2vhostvr256-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -59,16 +61,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2xcbase-eth-2vhostvr256-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -79,7 +86,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -99,148 +106,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot index 0a9a335505..37ab60e039 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -60,16 +62,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2XC switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -81,7 +88,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -93,148 +100,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot index 7b59a100ef..5129b9a5f1 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,16 +64,21 @@ | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} @@ -82,7 +89,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -102,148 +109,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot index 66d609e39e..594a110ee6 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-2vhostvr256-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,16 +64,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for eth-ip4base-eth-2vhostvr256-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -82,7 +89,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -102,148 +109,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 1 phy core,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 2 phy cores,\ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4-ip4base-eth-2vhostvr256-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IP4 routing config with 4 phy cores,\ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-ip4base-eth-2vhostvr256-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot index d473a76ca1..d67e1f4af0 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results IPv4 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -66,16 +68,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs IPv4 routing config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} @@ -87,7 +94,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -99,148 +106,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 826b54c4e4..e4480b49e0 100644 --- a/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/10ge2p1x710-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with VXLANoIPv4 | ... | and vhost* | ... @@ -66,16 +68,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} @@ -87,7 +94,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -107,148 +114,49 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 09475f1972..26a6c7d775 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1x710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -61,16 +63,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize} @@ -81,7 +88,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -101,148 +108,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot index 1ce7a37593..68aaf9c749 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -63,16 +65,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} @@ -85,7 +92,7 @@ | | ${jumbo_frames}= | Set Variable If | ${get_framesize} < ${1522} | | ... | ${False} | ${True} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -105,148 +112,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot index c0bd81d7e1..96ad6c5e86 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -86,7 +86,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -118,7 +118,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -151,7 +151,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -183,7 +183,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -217,7 +217,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -250,7 +250,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | When Initialize L2 bridge domains with Vhost-User in 3-node circular topology @@ -282,7 +282,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -314,7 +314,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -347,7 +347,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -379,7 +379,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -413,7 +413,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -446,7 +446,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -479,7 +479,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -511,7 +511,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -544,7 +544,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -576,7 +576,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -610,7 +610,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs @@ -643,7 +643,7 @@ | | ${threshold}= | Set Variable | ${min_rate} | | ${dut1_vm_refs}= | Create Dictionary | | ${dut2_vm_refs}= | Create Dictionary -| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot index 3b2007ff52..c65e4f9ffe 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr.robot @@ -27,6 +27,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *Raw results L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,16 +64,21 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm +| Local template | | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\ +| | ... | [Cfg] DUT runs L2BD switching config. +| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads. +| | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\ | | ... | trial throughput test. | | ... -| | [Arguments] | ${framesize} | ${wt} | ${rxq} +| | ... | *Arguments:* +| | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1). +| | ... | Type: integer, string +| | ... | - phy_cores - Number of physical cores. Type: integer +| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer +| | ... +| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | ${get_framesize}= | Get Frame Size | ${framesize} | | ${max_rate}= | Calculate pps | ${s_24.5G} | ${get_framesize} @@ -85,7 +92,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -97,148 +104,49 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=1 | rxq=1 +| | framesize=${64} | phy_cores=${1} | tc02-1518B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=1 | rxq=1 +| | framesize=${1518} | phy_cores=${1} | tc03-9000B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=1 | rxq=1 +| | framesize=${9000} | phy_cores=${1} | tc04-IMIX-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy\ -| | ... | core, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 1C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=1 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${1} | tc05-64B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=2 | rxq=1 +| | framesize=${64} | phy_cores=${2} | tc06-1518B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=2 | rxq=1 +| | framesize=${1518} | phy_cores=${2} | tc07-9000B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=2 | rxq=1 +| | framesize=${9000} | phy_cores=${2} | tc08-IMIX-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy\ -| | ... | cores, 1 receive queue per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 2C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=2 | rxq=1 +| | framesize=IMIX_v4_1 | phy_cores=${2} | tc09-64B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 64B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${64} | wt=4 | rxq=2 +| | framesize=${64} | phy_cores=${4} | tc10-1518B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 1518B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${1518} | wt=4 | rxq=2 +| | framesize=${1518} | phy_cores=${4} | tc11-9000B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\ -| | ... | trial throughput test. -| | ... | | [Tags] | 9000B | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=${9000} | wt=4 | rxq=2 +| | framesize=${9000} | phy_cores=${4} | tc12-IMIX-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-mrr -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy\ -| | ... | cores, 2 receive queues per NIC port. -| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single\ -| | ... | trial throughput test. -| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B) -| | ... | | [Tags] | IMIX | 4C -| | ... -| | [Template] | Check RR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | framesize=IMIX_v4_1 | wt=4 | rxq=2 +| | framesize=IMIX_v4_1 | phy_cores=${4} diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index d201c9f049..1b350e5fcd 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -69,16 +71,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Find NDR for ${framesize} frames using binary search start at -| | ... | 40GE linerate, step 10kpps. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -96,7 +92,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -115,223 +111,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2BD switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2bdbasemaclrn-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index 7fdfe84862..f1f7877fde 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -69,16 +71,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254 *** Keywords *** -| Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Find NDR for ${framesize} frames using binary search start at -| | ... | 40GE linerate, step 10kpps. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -96,7 +92,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -115,223 +111,73 @@ *** Test Cases *** | tc01-64B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-eth-l2xcbase-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs L2XC switching config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for eth-l2xcbase-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot b/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot index eac77fb479..26abb87c6f 100644 --- a/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vm_vhost/40ge2p1xl710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdrdisc.robot @@ -28,6 +28,8 @@ | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput IP14 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -69,16 +71,10 @@ | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253 *** Keywords *** -| Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread, ${wt} phy\ -| | ... | core, ${rxq} receive queue per NIC port. -| | ... | [Ver] Find NDR for ${framesize} frames using binary search start at -| | ... | 40GE linerate, step 10kpps. -| | ... -| | [Arguments] | ${wt} | ${rxq} | ${framesize} | ${min_rate} | ${search_type} +| Local template +| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type} | ${rxq}=${None} +| | ... | ${min_rate}=${10000} | | ... -| | # Test Variables required for test and test teardown | | Set Test Variable | ${framesize} | | Set Test Variable | ${min_rate} | | ${get_framesize}= | Get Frame Size | ${framesize} @@ -96,7 +92,7 @@ | | ... | ${False} | ${True} | | Set Test Variable | ${jumbo_frames} | | ... -| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | And Add PCI devices to all DUTs | | And Run Keyword If | ${get_framesize} < ${1522} | | ... | Add no multi seg to all DUTs @@ -115,223 +111,73 @@ *** Test Cases *** | tc01-64B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${64} | search_type=NDR | tc02-64B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${64} | search_type=PDR | tc03-1518B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=${1518} | search_type=NDR | tc04-1518B-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=${1518} | search_type=PDR | tc05-IMIX-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=NDR | tc06-IMIX-1t1c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 1 phy core, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 1C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=1 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${1} | framesize=IMIX_v4_1 | search_type=PDR | tc07-64B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${64} | search_type=NDR | tc08-64B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${64} | search_type=PDR | tc09-1518B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=${1518} | search_type=NDR | tc10-1518B-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=${1518} | search_type=PDR | tc11-IMIX-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=NDR | tc12-IMIX-2t2c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 2 phy cores, \ -| | ... | 1 receive queue per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 2C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=2 | rxq=1 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${2} | framesize=IMIX_v4_1 | search_type=PDR | tc13-64B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 64B | 4C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${64} | search_type=NDR | tc14-64B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 64 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${64} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${64} | search_type=PDR | tc15-1518B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps. -| | ... | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=${1518} | search_type=NDR | tc16-1518B-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for 1518 Byte frames \ -| | ... | using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=${1518} | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=${1518} | search_type=PDR | tc17-IMIX-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find NDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | NDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=NDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=NDR | tc18-IMIX-4t4c-ethip4-ip4base-eth-4vhostvr1024-2vm-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing config with 4 phy cores, \ -| | ... | 2 receive queues per NIC port. -| | ... | [Ver] Find PDR for IMIX_v4_1 frame \ -| | ... | size using binary search start at 40GE linerate, step 10kpps, LT=0.5%. -| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B) -| | ... | | [Tags] | IMIX | 4C | PDRDISC | SKIP_PATCH -| | ... -| | [Template] | Discover NDR or PDR for ethip4-ip4base-eth-4vhostvr1024-2vm -| | wt=4 | rxq=2 | framesize=IMIX_v4_1 | min_rate=${10000} | search_type=PDR +| | phy_cores=${4} | framesize=IMIX_v4_1 | search_type=PDR diff --git a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot index 0fcfd94779..fec0419206 100644 --- a/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot +++ b/tests/vpp/perf/vts/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-iacldstbase-2vhostvr1024-1vm-ndrpdrdisc.robot @@ -29,6 +29,8 @@ | ... | ${min_rate}pps | ${framesize} | ${traffic_profile} | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} | ... +| Test Template | Local template +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 | ... | and vhost* | ... @@ -107,9 +109,7 @@ *** Keywords *** -| Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | [Arguments] | ${num_of_threads} | ${rxq} | ${pkt_framesize} | ${search_type} -| | ... | ${acl_type}=${EMPTY} +| Local template | | [Documentation] | | ... | [Cfg] DUT runs L2BD switching config with 1 phy core,\ | | ... | 1 receive queue per NIC port. @@ -117,19 +117,22 @@ | | ... | linerate, step 10kpps. | | ... | | ... | *Arguments:* -| | ... | - num_of_threads - Number of worker threads to be used. Type: integer +| | ... | - phy_cores - Number of worker threads to be used. Type: integer | | ... | - rxq - Number of Rx queues to be used. Type: integer | | ... | - pkt_framesize - L2 Frame Size [B]. Type: integer | | ... | - search_type - Type of the search - non drop rate (NDR) or partial | | ... | drop rare (PDR). Type: string | | ... +| | [Arguments] | ${phy_cores} | ${pkt_framesize} | ${search_type} +| | ... | ${acl_type}=${EMPTY} | ${rxq}=${None} +| | ... | | ${binary_min}= | Set Variable | ${min_rate} | | ${threshold}= | Set Variable | ${min_rate} | | ${max_pkt_size}= | Set Variable If | '${pkt_framesize}' == 'IMIX_v4_1' | | | ... | ${1500 + ${vxlan_overhead}} | ${pkt_framesize + ${vxlan_overhead}} | | ${max_rate}= | Calculate pps | ${s_limit} | ${max_pkt_size} | | ${binary_max}= | Set Variable | ${max_rate} -| | Given Add '${num_of_threads}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology +| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq} | | Add PCI devices to all DUTs | | And Run Keyword If | ${max_pkt_size} < ${1522} | | ... | Add no multi seg to all DUTs @@ -168,162 +171,114 @@ | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} *** Test Cases *** -| tc01-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc +| tc01-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Tags] | 64B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=${64} | search_type=NDR -| tc02-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc +| tc02-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc | | [Tags] | 64B | 2C | PDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=${64} | search_type=PDR -| tc03-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc +| tc03-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Tags] | 150B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=${150} | search_type=NDR -| tc04-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc +| tc04-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc | | [Tags] | 150B | 2C | PDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=${150} | search_type=PDR -| tc05-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc +| tc05-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Tags] | 200B | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=${200} | search_type=NDR -| tc06-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc +| tc06-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc | | [Tags] | 200B | 2C | PDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=${200} | search_type=PDR -| tc07-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc +| tc07-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Tags] | IMIX | 2C | NDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=IMIX_v4_1 | search_type=NDR -| tc08-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc +| tc08-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-pdrdisc | | [Tags] | IMIX | 2C | PDRDISC -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=IMIX_v4_1 | search_type=PDR -| tc09-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc +| tc09-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc | | [Tags] | 64B | 2C | NDRDISC | ACL_PERMIT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=${64} | search_type=NDR | | ... | acl_type=permit -| tc10-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc +| tc10-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc | | [Tags] | 64B | 2C | PDRDISC | ACL_PERMIT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=${64} | search_type=PDR | | ... | acl_type=permit -| tc11-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc +| tc11-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc | | [Tags] | 150B | 2C | NDRDISC | ACL_PERMIT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=${150} | search_type=NDR | | ... | acl_type=permit -| tc12-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc +| tc12-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc | | [Tags] | 150B | 2C | PDRDISC | ACL_PERMIT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=${150} | search_type=PDR | | ... | acl_type=permit -| tc13-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc +| tc13-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc | | [Tags] | 200B | 2C | NDRDISC | ACL_PERMIT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=${200} | search_type=NDR | | ... | acl_type=permit -| tc14-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc +| tc14-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc | | [Tags] | 200B | 2C | PDRDISC | ACL_PERMIT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=${200} | search_type=PDR | | ... | acl_type=permit -| tc15-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc +| tc15-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-ndrdisc | | [Tags] | IMIX | 2C | NDRDISC | ACL_PERMIT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=IMIX_v4_1 | search_type=NDR | | ... | acl_type=permit -| tc16-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc +| tc16-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-acl-pdrdisc | | [Tags] | IMIX | 2C | PDRDISC | ACL_PERMIT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=IMIX_v4_1 | search_type=PDR | | ... | acl_type=permit -| tc17-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc +| tc17-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc | | [Tags] | 64B | 2C | NDRDISC | ACL_PERMIT_REFLECT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=${64} | search_type=NDR | | ... | acl_type=permit+reflect -| tc18-64B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc +| tc18-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc | | [Tags] | 64B | 2C | PDRDISC | ACL_PERMIT_REFLECT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${64} | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=${64} | search_type=PDR | | ... | acl_type=permit+reflect -| tc19-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc +| tc19-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc | | [Tags] | 150B | 2C | NDRDISC | ACL_PERMIT_REFLECT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=${150} | search_type=NDR | | ... | acl_type=permit+reflect -| tc20-150B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc +| tc20-150B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc | | [Tags] | 150B | 2C | PDRDISC | ACL_PERMIT_REFLECT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${150} | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=${150} | search_type=PDR | | ... | acl_type=permit+reflect -| tc21-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc +| tc21-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc | | [Tags] | 200B | 2C | NDRDISC | ACL_PERMIT_REFLECT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=${200} | search_type=NDR | | ... | acl_type=permit+reflect -| tc22-200B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc +| tc22-200B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc | | [Tags] | 200B | 2C | PDRDISC | ACL_PERMIT_REFLECT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=${200} | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=${200} | search_type=PDR | | ... | acl_type=permit+reflect -| tc23-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc +| tc23-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-ndrdisc | | [Tags] | IMIX | 2C | NDRDISC | ACL_PERMIT_REFLECT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=NDR +| | ${phy_cores}=${2} | pkt_framesize=IMIX_v4_1 | search_type=NDR | | ... | acl_type=permit+reflect -| tc24-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc +| tc24-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-aclreflect-pdrdisc | | [Tags] | IMIX | 2C | PDRDISC | ACL_PERMIT_REFLECT -| | ... -| | [Template] | Discover NDR or PDR for IPv4 forwarding with VHOST/VXLAN and ACL -| | num_of_threads=2 | rxq=2 | pkt_framesize=IMIX_v4_1 | search_type=PDR +| | ${phy_cores}=${2} | pkt_framesize=IMIX_v4_1 | search_type=PDR | | ... | acl_type=permit+reflect |