feat(astf): Support framesizes for ASTF

- No support for IMIX.
+ Fix a bad bug in padding (most ASTF profiles had wrong frame sizes).
+ Fix a big typo in TCP PPS profiles (s->c was not data, just RST).
+ Control transaction size via ASTF_N_DATA_FRAMES env variable.
 - Default value 5 leads to transactions smaller than before.
 + It ensures transaction is one burst (per direction) even for jumbo.
+ Edit autogen to set supported frame sizes based on suite id.
 + Both TCP and UDP use the same values:
  + 64B for CPS (exact for UDP, nominal for TCP).
  + 100B, 1518B and 9000B for TPUT and PPS.
   - TCP TPUT achievable minimum is 70B.
   + Used 100B to leave room for possible IPv6 ASTF tests.
 + Separate function for code reused by vpp and trex tests.
 - I do not really like the new "copy and edit" approach added here.
  + But it is a quick edit, better autogen refactor is low priority.
+ Consider both established and transitory sessions as valid.
 - Mostly for compatibility with 2202 behavior and to avoid ramp-ups.
 - Assuming both session states have similar enough VPP CPU overhead.
 + Added a TODO to investigate and maybe reconsider later.
+ Update the state timeout value to 240s.
 + That is the default for TCP (for transitory state).
 - UDP could keep using 300s.
  + But I prefer UDP and TCP to behave as similarly as possible.
+ Use TRex tunables to get the exact frame size (for data packets).
 - It is not clear why the recipe for MSS has to be this complicated.
 + Move code away from profile init, as frame size is not known there.
 + Change internal profile API, so values related to MSS are passed.
+ Lower ramp-up rate for TCP TPUT tests.
 + Because without lower rate, jumbo fails on packet loss in ramp-up.
 + UDP TPUT ramp-up rate also lowered (just to keep suites more similar).
+ Distinguish one-direction and aggregated average frame size.
 + Update keyword documentation where the distiction matters.
 + One-direction is needed for turning bandwidth limit to TPS limit.
 + Aggregated is needed for correct NDRPDR bandwidth result value.
 - TCP TPUT will always be few percent below bidirectional maximum.
  + That is unavoidable, as one direction sends more control packets.
+ Add runtime consistency checks so future refactors are safer.
 + Fail if padding requested would be negative.
 + Fail if suite claims unexpected values for packets per transaction.
+ Edit the 4 types of ASTF profiles to keep them similar to each other.
 + Move UDP TPUT limit value from a field back to direct argument.
 + Stop pretending first UDP packet is not data.
+ Apply small improvements where convenient.
 + Replace "aggregate" with "aggregated" where possible.
  + To lower probability of any future typos in variable names.
 + Avoid calling Set Numeric Frame Sizes twice.
 + Code formatting, keyword documentation, code comments, ...
 + Add TODOs for less important code quality improvements.
- Postpone updating of methodology pages to a subsequent change.

Change-Id: I4b381e5210e69669f972326202fdcc5a2c9c923b
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

63 files changed, 2022 insertions, 1114 deletions

diff --git a/GPL/tools/trex/trex_astf_profile.py b/GPL/tools/trex/trex_astf_profile.py
index 193ff21185..a2d177fdea 100644
--- a/GPL/tools/trex/trex_astf_profile.py
+++ b/GPL/tools/trex/trex_astf_profile.py
@@ -1,6 +1,6 @@
 #!/usr/bin/python3
 
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -73,6 +73,7 @@ def simple_burst(
         profile_file,
         duration,
         framesize,
+        n_data_frames,
         multiplier,
         port_0,
         port_1,
@@ -115,6 +116,7 @@ def simple_burst(
     :param duration: Expected duration for all transactions to finish,
         without any TRex related delays, without even latency.
     :param framesize: Frame size.
+    :param n_data_frames: Controls "size" of transaction for TPUT tests.
     :param multiplier: Multiplier of profile CPS.
     :param port_0: Port 0 on the traffic generator.
     :param port_1: Port 1 on the traffic generator.
@@ -125,6 +127,7 @@ def simple_burst(
     :type profile_file: str
     :type duration: float
     :type framesize: int or str
+    :type n_data_frames: int
     :type multiplier: int
     :type port_0: int
     :type port_1: int
@@ -151,7 +154,11 @@ def simple_burst(
         # TODO: key-values pairs to the profile file
         #  - ips ?
         print(f"### Profile file:\n{profile_file}")
-        profile = ASTFProfile.load(profile_file, framesize=framesize)
+        profile = ASTFProfile.load(
+            profile_file,
+            framesize=framesize,
+            n_data_frames=n_data_frames,
+        )
     except TRexError:
         print(f"Error while loading profile '{profile_file}'!")
         raise
@@ -416,6 +423,10 @@ def main():
         help=u"Size of a Frame without padding and IPG."
     )
     parser.add_argument(
+        u"--n_data_frames", type=int, default=5,
+        help=u"Use this many data frames per transaction and direction (TPUT)."
+    )
+    parser.add_argument(
         u"-m", u"--multiplier", required=True, type=float,
         help=u"Multiplier of profile CPS."
     )
@@ -455,6 +466,7 @@ def main():
         profile_file=args.profile,
         duration=args.duration,
         framesize=framesize,
+        n_data_frames=args.n_data_frames,
         multiplier=args.multiplier,
         port_0=args.port_0,
         port_1=args.port_1,
diff --git a/GPL/traffic_profiles/trex/profile_trex_astf_base_class.py b/GPL/traffic_profiles/trex/profile_trex_astf_base_class.py
index e36e52c2c1..cb8fd763e6 100644
--- a/GPL/traffic_profiles/trex/profile_trex_astf_base_class.py
+++ b/GPL/traffic_profiles/trex/profile_trex_astf_base_class.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -46,13 +46,9 @@ class TrafficProfileBaseClass:
         ]
     }
 
-    def __init__(self):
-        # Default values of required parameters; can be overwritten in
-        # "get_profile" method.
-        self.framesize = 64
-        self._pcap_dir = u""
-
-        # If needed, add your own parameters.
+    # TODO: Declare and document fields in a contructor to make pylint happier.
+    # TODO: Consider passing the values to define_profile(),
+    #       instead of keeping (and documenting) them as instance fields here.
 
     @property
     def pcap_dir(self):
@@ -72,7 +68,7 @@ class TrafficProfileBaseClass:
 
         :param current_length: Current length of the packet.
         :param required_length: Required length of the packet. If set to 0 then
-        self.framesize value is used.
+            self.framesize value is used.
         :type current_length: int
         :type required_length: int
         :returns: The generated padding.
@@ -82,20 +78,25 @@ class TrafficProfileBaseClass:
         #  use random.randrange(0, len(self.STREAM_TABLE[self.framesize])) ?
         if not required_length:
             required_length = self.framesize
-
-        return str(choices(ascii_letters, k=required_length - current_length))
+        missing = required_length - current_length
+        if missing < 0:
+            msg = f"Cannot to pad from {current_length} to {required_length}."
+            raise RuntimeError(msg)
+        padding = u"".join(choices(ascii_letters, k=missing))
+        return padding
 
     def define_profile(self):
         """Define profile to be used by T-Rex astf traffic generator.
 
         This method MUST return:
 
-            return ip_gen, templates, cap_list
+            return ip_gen, templates, kwargs
 
-            templates or cap_list CAN be None.
+            templates or kwargs CAN be None.
+            Kwargs can be used to define PCAP file, set MSS, ...
 
         :returns: IP generator and profile templates or list of pcap files for
-        traffic generator.
+            traffic generator.
         :rtype: tuple
         """
         raise NotImplementedError
@@ -108,15 +109,14 @@ class TrafficProfileBaseClass:
         :returns: Traffic profile.
         :rtype: trex.astf.trex_astf_profile.ASTFProfile
         """
-        ip_gen, templates, cap_list = self.define_profile()
-
-        # In most cases you will not have to change the code below:
+        ip_gen, templates, kwargs = self.define_profile()
+        if kwargs is None:
+            kwargs = dict()
 
-        # profile
         profile = ASTFProfile(
             default_ip_gen=ip_gen,
             templates=templates,
-            cap_list=cap_list
+            **kwargs
         )
 
         return profile
@@ -127,11 +127,13 @@ class TrafficProfileBaseClass:
         If needed, add your own parameters.
 
         :param kwargs: Key-value pairs used by "create_profile" method while
-        creating the profile.
+            creating the profile.
+        :type kwargs: dict
         :returns: Traffic profile.
         :rtype: trex.astf.trex_astf_profile.ASTFProfile
         """
         self.framesize = kwargs[u"framesize"]
+        self.n_data_frames = kwargs[u"n_data_frames"]
         self._pcap_dir = kwargs.get(
             u"pcap_dir", u"/opt/trex-core-2.88/scripts/avl"
         )
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py
index 70fcaa06bb..546e11bb5e 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h-pps.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -47,22 +47,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.3.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.3.255"
-
-        # Headers length; not used in this profile, just for the record of
-        # header length for TCP packet with 0B payload
-        self.headers_size = 58  # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options
-        self.data_size = 11111
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -73,31 +57,44 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.3.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.3.255"
+
+        # Headers length, not sure why TRex needs 32B for segment header.
+        real_headers_size = 70  # 18B L2 + 20B IPv4 + 32B TCP.
+        trex_headers_size = real_headers_size - 12  # As if TCP header is 20B.
+        trex_mss = self.framesize - trex_headers_size
+        real_mss = trex_mss - 12  # TRex honors segment header+data limit.
+        data_size = self.n_data_frames * real_mss
+
         # client commands
         prog_c = ASTFProgram()
         prog_c.connect()
-        prog_c.send(u"1" * self.data_size)
-        prog_c.recv(self.data_size)
+        prog_c.send(u"1" * data_size)
+        prog_c.recv(data_size)
 
         # server commands
         prog_s = ASTFProgram()
         prog_s.accept()
-        prog_c.recv(self.data_size)
-        prog_c.send(u"1" * self.data_size)
+        prog_s.recv(data_size)
+        prog_s.send(u"1" * data_size)
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -108,12 +105,25 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=64512,  # TODO: set via input parameter
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
 
-        return ip_gen, template, None
+        globinfo = ASTFGlobalInfo()
+        # Ensure correct data frame size.
+        globinfo.tcp.mss = trex_mss
+        # Ensure the whole transaction is a single burst (per direction).
+        globinfo.tcp.initwnd = self.n_data_frames
+        # Ensure buffers are large enough so starting window works.
+        globinfo.tcp.txbufsize = data_size
+        globinfo.tcp.rxbufsize = data_size
+        kwargs = dict(
+            default_c_glob_info=globinfo,
+            default_s_glob_info=globinfo,
+        )
+
+        return ip_gen, template, kwargs
 
 
 def register():
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py
index 2e4fca2af0..4c6a15ac7d 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-1024h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -47,21 +47,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.3.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.3.255"
-
-        # Headers length; not used in this profile, just for the record of
-        # header length for TCP packet with 0B payload
-        self.headers_size = 58  # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -72,6 +57,14 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
+        # No data, no way to manipulate frame sizes via MSS.
+
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.3.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.3.255"
+
         # client commands
         prog_c = ASTFProgram()
         # send syn
@@ -88,17 +81,17 @@ class TrafficProfile(TrafficProfileBaseClass):
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -109,7 +102,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=64512,  # TODO: set via input parameter
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py
index 19402bab95..565ccac3d5 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h-pps.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -47,22 +47,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.63.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.63.255"
-
-        # Headers length; not used in this profile, just for the record of
-        # header length for TCP packet with 0B payload
-        self.headers_size = 58  # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options
-        self.data_size = 11111
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -73,31 +57,44 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.63.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.63.255"
+
+        # Headers length, not sure why TRex needs 32B for segment header.
+        real_headers_size = 70  # 18B L2 + 20B IPv4 + 32B TCP.
+        trex_headers_size = real_headers_size - 12  # As if TCP header is 20B.
+        trex_mss = self.framesize - trex_headers_size
+        real_mss = trex_mss - 12  # TRex honors segment header+data limit.
+        data_size = self.n_data_frames * real_mss
+
         # client commands
         prog_c = ASTFProgram()
         prog_c.connect()
-        prog_c.send(u"1" * self.data_size)
-        prog_c.recv(self.data_size)
+        prog_c.send(u"1" * data_size)
+        prog_c.recv(data_size)
 
         # server commands
         prog_s = ASTFProgram()
         prog_s.accept()
-        prog_c.recv(self.data_size)
-        prog_c.send(u"1" * self.data_size)
+        prog_s.recv(data_size)
+        prog_s.send(u"1" * data_size)
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -108,12 +105,25 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=1032192,  # TODO: set via input parameter
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
 
-        return ip_gen, template, None
+        globinfo = ASTFGlobalInfo()
+        # Ensure correct data frame size.
+        globinfo.tcp.mss = trex_mss
+        # Ensure the whole transaction is a single burst (per direction).
+        globinfo.tcp.initwnd = self.n_data_frames
+        # Ensure buffers are large enough so starting window works.
+        globinfo.tcp.txbufsize = data_size
+        globinfo.tcp.rxbufsize = data_size
+        kwargs = dict(
+            default_c_glob_info=globinfo,
+            default_s_glob_info=globinfo,
+        )
+
+        return ip_gen, template, kwargs
 
 
 def register():
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py
index 8f4d12ee6a..728ad5b0d9 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-16384h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -47,21 +47,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.63.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.63.255"
-
-        # Headers length; not used in this profile, just for the record of
-        # header length for TCP packet with 0B payload
-        self.headers_size = 58  # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -72,6 +57,14 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
+        # No data, no way to manipulate frame sizes via MSS.
+
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.63.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.63.255"
+
         # client commands
         prog_c = ASTFProgram()
         # send syn
@@ -88,17 +81,17 @@ class TrafficProfile(TrafficProfileBaseClass):
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -109,7 +102,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=1032192,  # TODO: set via input parameter
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py
index 2a174307ec..54b38a43a9 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h-pps.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -47,22 +47,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"172.16.0.0"
-        self.p1_src_end_ip = u"172.19.255.255"
-        self.p1_dst_start_ip = u"20.16.0.0"
-        self.p1_dst_end_ip = u"20.19.255.255"
-
-        # Headers length; not used in this profile, just for the record of
-        # header length for TCP packet with 0B payload
-        self.headers_size = 58  # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options
-        self.data_size = 11111
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -73,31 +57,44 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
+        # IPs used in packet headers.
+        p1_src_start_ip = u"172.16.0.0"
+        p1_src_end_ip = u"172.19.255.255"
+        p1_dst_start_ip = u"20.16.0.0"
+        p1_dst_end_ip = u"20.19.255.255"
+
+        # Headers length, not sure why TRex needs 32B for segment header.
+        real_headers_size = 70  # 18B L2 + 20B IPv4 + 32B TCP.
+        trex_headers_size = real_headers_size - 12  # As if TCP header is 20B.
+        trex_mss = self.framesize - trex_headers_size
+        real_mss = trex_mss - 12  # TRex honors segment header+data limit.
+        data_size = self.n_data_frames * real_mss
+
         # client commands
         prog_c = ASTFProgram()
         prog_c.connect()
-        prog_c.send(u"1" * self.data_size)
-        prog_c.recv(self.data_size)
+        prog_c.send(u"1" * data_size)
+        prog_c.recv(data_size)
 
         # server commands
         prog_s = ASTFProgram()
         prog_s.accept()
-        prog_c.recv(self.data_size)
-        prog_c.send(u"1" * self.data_size)
+        prog_s.recv(data_size)
+        prog_s.send(u"1" * data_size)
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -108,12 +105,25 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=16515072,  # TODO: set via input parameter
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
 
-        return ip_gen, template, None
+        globinfo = ASTFGlobalInfo()
+        # Ensure correct data frame size.
+        globinfo.tcp.mss = trex_mss
+        # Ensure the whole transaction is a single burst (per direction).
+        globinfo.tcp.initwnd = self.n_data_frames
+        # Ensure buffers are large enough so starting window works.
+        globinfo.tcp.txbufsize = data_size
+        globinfo.tcp.rxbufsize = data_size
+        kwargs = dict(
+            default_c_glob_info=globinfo,
+            default_s_glob_info=globinfo,
+        )
+
+        return ip_gen, template, kwargs
 
 
 def register():
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py
index 344bc7dcac..ec4870a95e 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-262144h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -47,21 +47,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"172.16.0.0"
-        self.p1_src_end_ip = u"172.19.255.255"
-        self.p1_dst_start_ip = u"20.16.0.0"
-        self.p1_dst_end_ip = u"20.19.255.255"
-
-        # Headers length; not used in this profile, just for the record of
-        # header length for TCP packet with 0B payload
-        self.headers_size = 58  # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -72,6 +57,14 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
+        # No data, no way to manipulate frame sizes via MSS.
+
+        # IPs used in packet headers.
+        p1_src_start_ip = u"172.16.0.0"
+        p1_src_end_ip = u"172.19.255.255"
+        p1_dst_start_ip = u"20.16.0.0"
+        p1_dst_end_ip = u"20.19.255.255"
+
         # client commands
         prog_c = ASTFProgram()
         # send syn
@@ -88,17 +81,17 @@ class TrafficProfile(TrafficProfileBaseClass):
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -109,7 +102,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=16515072,  # TODO: set via input parameter
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py
index 6999dee6f9..0108edbcd5 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h-pps.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -47,22 +47,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.15.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.15.255"
-
-        # Headers length; not used in this profile, just for the record of
-        # header length for TCP packet with 0B payload
-        self.headers_size = 58  # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options
-        self.data_size = 11111
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -73,31 +57,44 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.15.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.15.255"
+
+        # Headers length, not sure why TRex needs 32B for segment header.
+        real_headers_size = 70  # 18B L2 + 20B IPv4 + 32B TCP.
+        trex_headers_size = real_headers_size - 12  # As if TCP header is 20B.
+        trex_mss = self.framesize - trex_headers_size
+        real_mss = trex_mss - 12  # TRex honors segment header+data limit.
+        data_size = self.n_data_frames * real_mss
+
         # client commands
         prog_c = ASTFProgram()
         prog_c.connect()
-        prog_c.send(u"1" * self.data_size)
-        prog_c.recv(self.data_size)
+        prog_c.send(u"1" * data_size)
+        prog_c.recv(data_size)
 
         # server commands
         prog_s = ASTFProgram()
         prog_s.accept()
-        prog_c.recv(self.data_size)
-        prog_c.send(u"1" * self.data_size)
+        prog_s.recv(data_size)
+        prog_s.send(u"1" * data_size)
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -108,12 +105,25 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=258048,  # TODO: set via input parameter
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
 
-        return ip_gen, template, None
+        globinfo = ASTFGlobalInfo()
+        # Ensure correct data frame size.
+        globinfo.tcp.mss = trex_mss
+        # Ensure the whole transaction is a single burst (per direction).
+        globinfo.tcp.initwnd = self.n_data_frames
+        # Ensure buffers are large enough so starting window works.
+        globinfo.tcp.txbufsize = data_size
+        globinfo.tcp.rxbufsize = data_size
+        kwargs = dict(
+            default_c_glob_info=globinfo,
+            default_s_glob_info=globinfo,
+        )
+
+        return ip_gen, template, kwargs
 
 
 def register():
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py
index 4278e3d099..6124baa6a1 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-4096h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -47,21 +47,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self, **kwargs):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.15.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.15.255"
-
-        # Headers length; not used in this profile, just for the record of
-        # header length for TCP packet with 0B payload
-        self.headers_size = 58  # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -72,6 +57,14 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
+        # No data, no way to manipulate frame sizes via MSS.
+
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.15.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.15.255"
+
         # client commands
         prog_c = ASTFProgram()
         # send syn
@@ -88,17 +81,17 @@ class TrafficProfile(TrafficProfileBaseClass):
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -109,7 +102,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=258048,  # TODO: set via input parameter
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py
index 6b3bbd4c9f..54de3e500d 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h-pps.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -47,22 +47,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.255.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.255.255"
-
-        # Headers length; not used in this profile, just for the record of
-        # header length for TCP packet with 0B payload
-        self.headers_size = 58  # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options
-        self.data_size = 11111
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -73,31 +57,44 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.255.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.255.255"
+
+        # Headers length, not sure why TRex needs 32B for segment header.
+        real_headers_size = 70  # 18B L2 + 20B IPv4 + 32B TCP.
+        trex_headers_size = real_headers_size - 12  # As if TCP header is 20B.
+        trex_mss = self.framesize - trex_headers_size
+        real_mss = trex_mss - 12  # TRex honors segment header+data limit.
+        data_size = self.n_data_frames * real_mss
+
         # client commands
         prog_c = ASTFProgram()
         prog_c.connect()
-        prog_c.send(u"1" * self.data_size)
-        prog_c.recv(self.data_size)
+        prog_c.send(u"1" * data_size)
+        prog_c.recv(data_size)
 
         # server commands
         prog_s = ASTFProgram()
         prog_s.accept()
-        prog_c.recv(self.data_size)
-        prog_c.send(u"1" * self.data_size)
+        prog_s.recv(data_size)
+        prog_s.send(u"1" * data_size)
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -108,12 +105,25 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=4128768,  # TODO: set via input parameter
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
 
-        return ip_gen, template, None
+        globinfo = ASTFGlobalInfo()
+        # Ensure correct data frame size.
+        globinfo.tcp.mss = trex_mss
+        # Ensure the whole transaction is a single burst (per direction).
+        globinfo.tcp.initwnd = self.n_data_frames
+        # Ensure buffers are large enough so starting window works.
+        globinfo.tcp.txbufsize = data_size
+        globinfo.tcp.rxbufsize = data_size
+        kwargs = dict(
+            default_c_glob_info=globinfo,
+            default_s_glob_info=globinfo,
+        )
+
+        return ip_gen, template, kwargs
 
 
 def register():
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py
index 1be78d8c42..13c6ee8f38 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4tcp-65536h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -47,21 +47,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.255.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.255.255"
-
-        # Headers length; not used in this profile, just for the record of
-        # header length for TCP packet with 0B payload
-        self.headers_size = 58  # 14B l2 + 20B ipv4 + 24B tcp incl. 4B options
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -72,6 +57,14 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
+        # No data, no way to manipulate frame sizes via MSS.
+
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.255.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.255.255"
+
         # client commands
         prog_c = ASTFProgram()
         # send syn
@@ -88,17 +81,17 @@ class TrafficProfile(TrafficProfileBaseClass):
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -109,7 +102,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=4128768,  # TODO: set via input parameter
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py
index 667385ffbf..135e7fbdc7 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h-pps.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -46,84 +46,80 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self, **kwargs):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.3.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.3.255"
-
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B UDP
-
-        self.udp_data = u""
-
-        self.n_data = 32  # TODO: set via input parameter
-        self.m_delay = 2000000  # delay 2000s (2,000,000 ms)
-        self.u_delay = 1000 * self.m_delay  # delay 2000s (2,000,000,000 us)
-        self.limit = 64512
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
         This method MUST return:
 
-            return ip_gen, templates
+            return ip_gen, templates, None
 
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
-        if self.framesize == 64:
-            self.udp_data += self._gen_padding(self.headers_size, 72)
-        if self.framesize == 1518:
-            self.udp_data += self._gen_padding(self.headers_size, 1514)
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.3.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.3.255"
+
+        # The difference between data size and frame size.
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # TODO: Use the "connection protocol" from CPS traffic profile?
+        # Currently, the first data packet is all DUT sees about the session.
+
+        # Avoid sending keepalives.
+        m_delay = 2000000  # delay 2000s (2,000,000 ms)
+
+        # Data, not padded yet.
+        udp_data = u""
+        # Pad the data to achieve the intended frame size.
+        udp_data += self._gen_padding(headers_size)
+
+        # Safety check, the current programs send at least 1 packet.
+        if self.n_data_frames < 1:
+            raise RuntimeError("n_data_frames < 1: {self.n_data_frames}")
 
         # Client program.
         prog_c = ASTFProgram(stream=False)
-        prog_c.set_keepalive_msg(self.m_delay)
-        prog_c.send_msg(self.udp_data)
-        # No delay, PPS tests combine connect and data send (no data receive).
-        prog_c.set_var(u"var1", self.n_data)
+        prog_c.set_keepalive_msg(m_delay)
+        prog_c.set_var(u"var1", self.n_data_frames)
         prog_c.set_label(u"a:")
-        prog_c.send_msg(self.udp_data)
+        prog_c.send_msg(udp_data)
         prog_c.jmp_nz(u"var1", u"a:")
         # We should read the server response,
         # but no reason to overload client workers even more.
 
         # Server program.
         prog_s = ASTFProgram(stream=False)
-        prog_s.set_keepalive_msg(self.m_delay)
+        prog_s.set_keepalive_msg(m_delay)
         # If server closes too soon, new instances are started
         # leading in too much replies. To prevent that, we need to recv all.
-        prog_s.recv_msg(1 + self.n_data)
+        prog_s.recv_msg(self.n_data_frames)
         # In packet loss scenarios, some instances never get here.
         # This maybe increases server traffic duration,
         # but no other way if we want to avoid
         # TRex creating a second instance of the same server.
-        prog_s.send_msg(self.udp_data)
-        prog_s.set_var(u"var2", self.n_data)
+        prog_s.set_var(u"var2", self.n_data_frames)
         prog_s.set_label(u"b:")
-        prog_s.send_msg(self.udp_data)
+        prog_s.send_msg(udp_data)
         prog_s.jmp_nz(u"var2", u"b:")
         # VPP never duplicates packets,
         # so it is safe to close the server instance now.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -133,8 +129,8 @@ class TrafficProfile(TrafficProfileBaseClass):
         temp_c = ASTFTCPClientTemplate(
             program=prog_c,
             ip_gen=ip_gen,
-            limit=self.limit,
-            port=8080
+            limit=64512,  # TODO: Any benefit of making this configurable?
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py
index 78ee8f31fc..a1282adf2f 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -49,26 +49,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.3.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.3.255"
-
-        # UDP messages
-        self.udp_req = u"GET"
-        self.udp_res = u"ACK"
-
-        # Headers length
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B udp
-
-        # No need to set keepalive, both programs end just after start&send.
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -78,13 +58,29 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates ASTFProfile().
         :rtype: tuple
         """
-        self.udp_req += self._gen_padding(self.headers_size + len(self.udp_req))
-        self.udp_res += self._gen_padding(self.headers_size + len(self.udp_res))
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.3.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.3.255"
+
+        # Headers length
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # UDP messages, not padded yet.
+        udp_req = u"GET"
+        udp_res = u"ACK"
+
+        # Padd to the required frame size.
+        udp_req += self._gen_padding(headers_size + len(udp_req))
+        udp_res += self._gen_padding(headers_size + len(udp_res))
+
+        # No need to set keepalive, both programs end just after start&send.
 
         # client commands
         prog_c = ASTFProgram(stream=False)
         # send REQ message
-        prog_c.send_msg(self.udp_req)
+        prog_c.send_msg(udp_req)
         # No need to process the response, seeing L2 counter is enough.
         # Client program can end here.
 
@@ -93,22 +89,22 @@ class TrafficProfile(TrafficProfileBaseClass):
         # When server instance is created means REQ is visible in L2 counter.
         # No need to receive explicitly?
         # send RES message
-        prog_s.send_msg(self.udp_res)
+        prog_s.send_msg(udp_res)
         # Server program can end here.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -119,7 +115,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=64512,  # TODO: set via input parameter ?
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py
index 1739fcca31..05976bc45c 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h-pps.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -46,84 +46,80 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self, **kwargs):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.63.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.63.255"
-
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B UDP
-
-        self.udp_data = u""
-
-        self.n_data = 32  # TODO: set via input parameter
-        self.m_delay = 2000000  # delay 2000s (2,000,000 ms)
-        self.u_delay = 1000 * self.m_delay  # delay 2000s (2,000,000,000 us)
-        self.limit = 1032192
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
         This method MUST return:
 
-            return ip_gen, templates
+            return ip_gen, templates, None
 
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
-        if self.framesize == 64:
-            self.udp_data += self._gen_padding(self.headers_size, 72)
-        if self.framesize == 1518:
-            self.udp_data += self._gen_padding(self.headers_size, 1514)
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.63.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.63.255"
+
+        # The difference between data size and frame size.
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # TODO: Use the "connection protocol" from CPS traffic profile?
+        # Currently, the first data packet is all DUT sees about the session.
+
+        # Avoid sending keepalives.
+        m_delay = 2000000  # delay 2000s (2,000,000 ms)
+
+        # Data, not padded yet.
+        udp_data = u""
+        # Pad the data to achieve the intended frame size.
+        udp_data += self._gen_padding(headers_size)
+
+        # Safety check, the current programs send at least 1 packet.
+        if self.n_data_frames < 1:
+            raise RuntimeError("n_data_frames < 1: {self.n_data_frames}")
 
         # Client program.
         prog_c = ASTFProgram(stream=False)
-        prog_c.set_keepalive_msg(self.m_delay)
-        prog_c.send_msg(self.udp_data)
-        # No delay, PPS tests combine connect and data send (no data receive).
-        prog_c.set_var(u"var1", self.n_data)
+        prog_c.set_keepalive_msg(m_delay)
+        prog_c.set_var(u"var1", self.n_data_frames)
         prog_c.set_label(u"a:")
-        prog_c.send_msg(self.udp_data)
+        prog_c.send_msg(udp_data)
         prog_c.jmp_nz(u"var1", u"a:")
         # We should read the server response,
         # but no reason to overload client workers even more.
 
         # Server program.
         prog_s = ASTFProgram(stream=False)
-        prog_s.set_keepalive_msg(self.m_delay)
+        prog_s.set_keepalive_msg(m_delay)
         # If server closes too soon, new instances are started
         # leading in too much replies. To prevent that, we need to recv all.
-        prog_s.recv_msg(1 + self.n_data)
+        prog_s.recv_msg(self.n_data_frames)
         # In packet loss scenarios, some instances never get here.
         # This maybe increases server traffic duration,
         # but no other way if we want to avoid
         # TRex creating a second instance of the same server.
-        prog_s.send_msg(self.udp_data)
-        prog_s.set_var(u"var2", self.n_data)
+        prog_s.set_var(u"var2", self.n_data_frames)
         prog_s.set_label(u"b:")
-        prog_s.send_msg(self.udp_data)
+        prog_s.send_msg(udp_data)
         prog_s.jmp_nz(u"var2", u"b:")
         # VPP never duplicates packets,
         # so it is safe to close the server instance now.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -133,8 +129,8 @@ class TrafficProfile(TrafficProfileBaseClass):
         temp_c = ASTFTCPClientTemplate(
             program=prog_c,
             ip_gen=ip_gen,
-            limit=self.limit,
-            port=8080
+            limit=1032192,  # TODO: Any benefit of making this configurable?
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py
index 7d35a68db6..3a1793a617 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -49,26 +49,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.63.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.63.255"
-
-        # UDP messages
-        self.udp_req = u"GET"
-        self.udp_res = u"ACK"
-
-        # Headers length
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B udp
-
-        # No need to set keepalive, both programs end just after start&send.
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -78,13 +58,29 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates ASTFProfile().
         :rtype: tuple
         """
-        self.udp_req += self._gen_padding(self.headers_size + len(self.udp_req))
-        self.udp_res += self._gen_padding(self.headers_size + len(self.udp_res))
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.63.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.63.255"
+
+        # Headers length
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # UDP messages, not padded yet.
+        udp_req = u"GET"
+        udp_res = u"ACK"
+
+        # Padd to the required frame size.
+        udp_req += self._gen_padding(headers_size + len(udp_req))
+        udp_res += self._gen_padding(headers_size + len(udp_res))
+
+        # No need to set keepalive, both programs end just after start&send.
 
         # client commands
         prog_c = ASTFProgram(stream=False)
         # send REQ message
-        prog_c.send_msg(self.udp_req)
+        prog_c.send_msg(udp_req)
         # No need to process the response, seeing L2 counter is enough.
         # Client program can end here.
 
@@ -93,22 +89,22 @@ class TrafficProfile(TrafficProfileBaseClass):
         # When server instance is created means REQ is visible in L2 counter.
         # No need to receive explicitly?
         # send RES message
-        prog_s.send_msg(self.udp_res)
+        prog_s.send_msg(udp_res)
         # Server program can end here.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -119,7 +115,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=1032192,  # TODO: set via input parameter ?
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py
index 9445b11565..801db90095 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h-pps.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -46,84 +46,80 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self, **kwargs):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"172.16.0.0"
-        self.p1_src_end_ip = u"172.19.255.255"
-        self.p1_dst_start_ip = u"20.16.0.0"
-        self.p1_dst_end_ip = u"20.19.255.255"
-
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B UDP
-
-        self.udp_data = u""
-
-        self.n_data = 32  # TODO: set via input parameter
-        self.m_delay = 2000000  # delay 2000s (2,000,000 ms)
-        self.u_delay = 1000 * self.m_delay  # delay 2000s (2,000,000,000 us)
-        self.limit = 16515072
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
         This method MUST return:
 
-            return ip_gen, templates
+            return ip_gen, templates, None
 
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
-        if self.framesize == 64:
-            self.udp_data += self._gen_padding(self.headers_size, 72)
-        if self.framesize == 1518:
-            self.udp_data += self._gen_padding(self.headers_size, 1514)
+        # IPs used in packet headers.
+        p1_src_start_ip = u"172.16.0.0"
+        p1_src_end_ip = u"172.19.255.255"
+        p1_dst_start_ip = u"20.16.0.0"
+        p1_dst_end_ip = u"20.19.255.255"
+
+        # The difference between data size and frame size.
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # TODO: Use the "connection protocol" from CPS traffic profile?
+        # Currently, the first data packet is all DUT sees about the session.
+
+        # Avoid sending keepalives.
+        m_delay = 2000000  # delay 2000s (2,000,000 ms)
+
+        # Data, not padded yet.
+        udp_data = u""
+        # Pad the data to achieve the intended frame size.
+        udp_data += self._gen_padding(headers_size)
+
+        # Safety check, the current programs send at least 1 packet.
+        if self.n_data_frames < 1:
+            raise RuntimeError("n_data_frames < 1: {self.n_data_frames}")
 
         # Client program.
         prog_c = ASTFProgram(stream=False)
-        prog_c.set_keepalive_msg(self.m_delay)
-        prog_c.send_msg(self.udp_data)
-        # No delay, PPS tests combine connect and data send (no data receive).
-        prog_c.set_var(u"var1", self.n_data)
+        prog_c.set_keepalive_msg(m_delay)
+        prog_c.set_var(u"var1", self.n_data_frames)
         prog_c.set_label(u"a:")
-        prog_c.send_msg(self.udp_data)
+        prog_c.send_msg(udp_data)
         prog_c.jmp_nz(u"var1", u"a:")
         # We should read the server response,
         # but no reason to overload client workers even more.
 
         # Server program.
         prog_s = ASTFProgram(stream=False)
-        prog_s.set_keepalive_msg(self.m_delay)
+        prog_s.set_keepalive_msg(m_delay)
         # If server closes too soon, new instances are started
         # leading in too much replies. To prevent that, we need to recv all.
-        prog_s.recv_msg(1 + self.n_data)
+        prog_s.recv_msg(self.n_data_frames)
         # In packet loss scenarios, some instances never get here.
         # This maybe increases server traffic duration,
         # but no other way if we want to avoid
         # TRex creating a second instance of the same server.
-        prog_s.send_msg(self.udp_data)
-        prog_s.set_var(u"var2", self.n_data)
+        prog_s.set_var(u"var2", self.n_data_frames)
         prog_s.set_label(u"b:")
-        prog_s.send_msg(self.udp_data)
+        prog_s.send_msg(udp_data)
         prog_s.jmp_nz(u"var2", u"b:")
         # VPP never duplicates packets,
         # so it is safe to close the server instance now.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -133,8 +129,8 @@ class TrafficProfile(TrafficProfileBaseClass):
         temp_c = ASTFTCPClientTemplate(
             program=prog_c,
             ip_gen=ip_gen,
-            limit=self.limit,
-            port=8080
+            limit=16515072,  # TODO: Any benefit of making this configurable?
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py
index 8fe8f02a91..2203cf3d0b 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-262144h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -49,26 +49,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"172.16.0.0"
-        self.p1_src_end_ip = u"172.19.255.255"
-        self.p1_dst_start_ip = u"20.16.0.0"
-        self.p1_dst_end_ip = u"20.19.255.255"
-
-        # UDP messages
-        self.udp_req = u"GET"
-        self.udp_res = u"ACK"
-
-        # Headers length
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B udp
-
-        # No need to set keepalive, both programs end just after start&send.
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -78,13 +58,29 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates ASTFProfile().
         :rtype: tuple
         """
-        self.udp_req += self._gen_padding(self.headers_size + len(self.udp_req))
-        self.udp_res += self._gen_padding(self.headers_size + len(self.udp_res))
+        # IPs used in packet headers.
+        p1_src_start_ip = u"172.16.0.0"
+        p1_src_end_ip = u"172.19.255.255"
+        p1_dst_start_ip = u"20.16.0.0"
+        p1_dst_end_ip = u"20.19.255.255"
+
+        # Headers length
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # UDP messages, not padded yet.
+        udp_req = u"GET"
+        udp_res = u"ACK"
+
+        # Padd to the required frame size.
+        udp_req += self._gen_padding(headers_size + len(udp_req))
+        udp_res += self._gen_padding(headers_size + len(udp_res))
+
+        # No need to set keepalive, both programs end just after start&send.
 
         # client commands
         prog_c = ASTFProgram(stream=False)
         # send REQ message
-        prog_c.send_msg(self.udp_req)
+        prog_c.send_msg(udp_req)
         # No need to process the response, seeing L2 counter is enough.
         # Client program can end here.
 
@@ -93,22 +89,22 @@ class TrafficProfile(TrafficProfileBaseClass):
         # When server instance is created means REQ is visible in L2 counter.
         # No need to receive explicitly?
         # send RES message
-        prog_s.send_msg(self.udp_res)
+        prog_s.send_msg(udp_res)
         # Server program can end here.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -119,7 +115,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=16515072,  # TODO: set via input parameter ?
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py
index 00dbeee308..5de25273ef 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h-pps.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -46,84 +46,80 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self, **kwargs):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.15.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.15.255"
-
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B UDP
-
-        self.udp_data = u""
-
-        self.n_data = 32  # TODO: set via input parameter
-        self.m_delay = 2000000  # delay 2000s (2,000,000 ms)
-        self.u_delay = 1000 * self.m_delay  # delay 2000s (2,000,000,000 us)
-        self.limit = 258048
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
         This method MUST return:
 
-            return ip_gen, templates
+            return ip_gen, templates, None
 
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
-        if self.framesize == 64:
-            self.udp_data += self._gen_padding(self.headers_size, 72)
-        if self.framesize == 1518:
-            self.udp_data += self._gen_padding(self.headers_size, 1514)
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.15.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.15.255"
+
+        # The difference between data size and frame size.
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # TODO: Use the "connection protocol" from CPS traffic profile?
+        # Currently, the first data packet is all DUT sees about the session.
+
+        # Avoid sending keepalives.
+        m_delay = 2000000  # delay 2000s (2,000,000 ms)
+
+        # Data, not padded yet.
+        udp_data = u""
+        # Pad the data to achieve the intended frame size.
+        udp_data += self._gen_padding(headers_size)
+
+        # Safety check, the current programs send at least 1 packet.
+        if self.n_data_frames < 1:
+            raise RuntimeError("n_data_frames < 1: {self.n_data_frames}")
 
         # Client program.
         prog_c = ASTFProgram(stream=False)
-        prog_c.set_keepalive_msg(self.m_delay)
-        prog_c.send_msg(self.udp_data)
-        # No delay, PPS tests combine connect and data send (no data receive).
-        prog_c.set_var(u"var1", self.n_data)
+        prog_c.set_keepalive_msg(m_delay)
+        prog_c.set_var(u"var1", self.n_data_frames)
         prog_c.set_label(u"a:")
-        prog_c.send_msg(self.udp_data)
+        prog_c.send_msg(udp_data)
         prog_c.jmp_nz(u"var1", u"a:")
         # We should read the server response,
         # but no reason to overload client workers even more.
 
         # Server program.
         prog_s = ASTFProgram(stream=False)
-        prog_s.set_keepalive_msg(self.m_delay)
+        prog_s.set_keepalive_msg(m_delay)
         # If server closes too soon, new instances are started
         # leading in too much replies. To prevent that, we need to recv all.
-        prog_s.recv_msg(1 + self.n_data)
+        prog_s.recv_msg(self.n_data_frames)
         # In packet loss scenarios, some instances never get here.
         # This maybe increases server traffic duration,
         # but no other way if we want to avoid
         # TRex creating a second instance of the same server.
-        prog_s.send_msg(self.udp_data)
-        prog_s.set_var(u"var2", self.n_data)
+        prog_s.set_var(u"var2", self.n_data_frames)
         prog_s.set_label(u"b:")
-        prog_s.send_msg(self.udp_data)
+        prog_s.send_msg(udp_data)
         prog_s.jmp_nz(u"var2", u"b:")
         # VPP never duplicates packets,
         # so it is safe to close the server instance now.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -133,8 +129,8 @@ class TrafficProfile(TrafficProfileBaseClass):
         temp_c = ASTFTCPClientTemplate(
             program=prog_c,
             ip_gen=ip_gen,
-            limit=self.limit,
-            port=8080
+            limit=258048,  # TODO: Any benefit of making this configurable?
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py
index 2285a633b0..81c074e5e3 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-4096h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -49,26 +49,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.15.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.15.255"
-
-        # UDP messages
-        self.udp_req = u"GET"
-        self.udp_res = u"ACK"
-
-        # Headers length
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B udp
-
-        # No need to set keepalive, both programs end just after start&send.
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -78,13 +58,29 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates ASTFProfile().
         :rtype: tuple
         """
-        self.udp_req += self._gen_padding(self.headers_size + len(self.udp_req))
-        self.udp_res += self._gen_padding(self.headers_size + len(self.udp_res))
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.15.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.15.255"
+
+        # Headers length
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # UDP messages, not padded yet.
+        udp_req = u"GET"
+        udp_res = u"ACK"
+
+        # Padd to the required frame size.
+        udp_req += self._gen_padding(headers_size + len(udp_req))
+        udp_res += self._gen_padding(headers_size + len(udp_res))
+
+        # No need to set keepalive, both programs end just after start&send.
 
         # client commands
         prog_c = ASTFProgram(stream=False)
         # send REQ message
-        prog_c.send_msg(self.udp_req)
+        prog_c.send_msg(udp_req)
         # No need to process the response, seeing L2 counter is enough.
         # Client program can end here.
 
@@ -93,22 +89,22 @@ class TrafficProfile(TrafficProfileBaseClass):
         # When server instance is created means REQ is visible in L2 counter.
         # No need to receive explicitly?
         # send RES message
-        prog_s.send_msg(self.udp_res)
+        prog_s.send_msg(udp_res)
         # Server program can end here.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -119,7 +115,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=258048,  # TODO: set via input parameter ?
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py
index 3b6c3c7e55..73270607c1 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h-pps.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -46,84 +46,80 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self, **kwargs):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.255.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.255.255"
-
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B UDP
-
-        self.udp_data = u""
-
-        self.n_data = 32  # TODO: set via input parameter
-        self.m_delay = 2000000  # delay 2000s (2,000,000 ms)
-        self.u_delay = 1000 * self.m_delay  # delay 2000s (2,000,000,000 us)
-        self.limit = 4128768
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
         This method MUST return:
 
-            return ip_gen, templates
+            return ip_gen, templates, None
 
         :returns: IP generator and profile templates for ASTFProfile().
         :rtype: tuple
         """
-        if self.framesize == 64:
-            self.udp_data += self._gen_padding(self.headers_size, 72)
-        if self.framesize == 1518:
-            self.udp_data += self._gen_padding(self.headers_size, 1514)
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.255.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.255.255"
+
+        # The difference between data size and frame size.
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # TODO: Use the "connection protocol" from CPS traffic profile?
+        # Currently, the first data packet is all DUT sees about the session.
+
+        # Avoid sending keepalives.
+        m_delay = 2000000  # delay 2000s (2,000,000 ms)
+
+        # Data, not padded yet.
+        udp_data = u""
+        # Pad the data to achieve the intended frame size.
+        udp_data += self._gen_padding(headers_size)
+
+        # Safety check, the current programs send at least 1 packet.
+        if self.n_data_frames < 1:
+            raise RuntimeError("n_data_frames < 1: {self.n_data_frames}")
 
         # Client program.
         prog_c = ASTFProgram(stream=False)
-        prog_c.set_keepalive_msg(self.m_delay)
-        prog_c.send_msg(self.udp_data)
-        # No delay, PPS tests combine connect and data send (no data receive).
-        prog_c.set_var(u"var1", self.n_data)
+        prog_c.set_keepalive_msg(m_delay)
+        prog_c.set_var(u"var1", self.n_data_frames)
         prog_c.set_label(u"a:")
-        prog_c.send_msg(self.udp_data)
+        prog_c.send_msg(udp_data)
         prog_c.jmp_nz(u"var1", u"a:")
         # We should read the server response,
         # but no reason to overload client workers even more.
 
         # Server program.
         prog_s = ASTFProgram(stream=False)
-        prog_s.set_keepalive_msg(self.m_delay)
+        prog_s.set_keepalive_msg(m_delay)
         # If server closes too soon, new instances are started
         # leading in too much replies. To prevent that, we need to recv all.
-        prog_s.recv_msg(1 + self.n_data)
+        prog_s.recv_msg(self.n_data_frames)
         # In packet loss scenarios, some instances never get here.
         # This maybe increases server traffic duration,
         # but no other way if we want to avoid
         # TRex creating a second instance of the same server.
-        prog_s.send_msg(self.udp_data)
-        prog_s.set_var(u"var2", self.n_data)
+        prog_s.set_var(u"var2", self.n_data_frames)
         prog_s.set_label(u"b:")
-        prog_s.send_msg(self.udp_data)
+        prog_s.send_msg(udp_data)
         prog_s.jmp_nz(u"var2", u"b:")
         # VPP never duplicates packets,
         # so it is safe to close the server instance now.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -133,8 +129,8 @@ class TrafficProfile(TrafficProfileBaseClass):
         temp_c = ASTFTCPClientTemplate(
             program=prog_c,
             ip_gen=ip_gen,
-            limit=self.limit,
-            port=8080
+            limit=4128768,  # TODO: Any benefit of making this configurable?
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py
index 327cc36e01..f1ee9125f2 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-65536h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 #
 # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
 #
@@ -49,26 +49,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
 class TrafficProfile(TrafficProfileBaseClass):
     """Traffic profile."""
 
-    def __init__(self):
-        """Initialization and setting of profile parameters."""
-
-        super(TrafficProfileBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.255.255"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.255.255"
-
-        # UDP messages
-        self.udp_req = u"GET"
-        self.udp_res = u"ACK"
-
-        # Headers length
-        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B udp
-
-        # No need to set keepalive, both programs end just after start&send.
-
     def define_profile(self):
         """Define profile to be used by advanced stateful traffic generator.
 
@@ -78,13 +58,29 @@ class TrafficProfile(TrafficProfileBaseClass):
         :returns: IP generator and profile templates ASTFProfile().
         :rtype: tuple
         """
-        self.udp_req += self._gen_padding(self.headers_size + len(self.udp_req))
-        self.udp_res += self._gen_padding(self.headers_size + len(self.udp_res))
+        # IPs used in packet headers.
+        p1_src_start_ip = u"192.168.0.0"
+        p1_src_end_ip = u"192.168.255.255"
+        p1_dst_start_ip = u"20.0.0.0"
+        p1_dst_end_ip = u"20.0.255.255"
+
+        # Headers length
+        headers_size = 46  # 18B L2 + 20B IPv4 + 8B UDP.
+
+        # UDP messages, not padded yet.
+        udp_req = u"GET"
+        udp_res = u"ACK"
+
+        # Padd to the required frame size.
+        udp_req += self._gen_padding(headers_size + len(udp_req))
+        udp_res += self._gen_padding(headers_size + len(udp_res))
+
+        # No need to set keepalive, both programs end just after start&send.
 
         # client commands
         prog_c = ASTFProgram(stream=False)
         # send REQ message
-        prog_c.send_msg(self.udp_req)
+        prog_c.send_msg(udp_req)
         # No need to process the response, seeing L2 counter is enough.
         # Client program can end here.
 
@@ -93,22 +89,22 @@ class TrafficProfile(TrafficProfileBaseClass):
         # When server instance is created means REQ is visible in L2 counter.
         # No need to receive explicitly?
         # send RES message
-        prog_s.send_msg(self.udp_res)
+        prog_s.send_msg(udp_res)
         # Server program can end here.
 
         # ip generators
         ip_gen_c = ASTFIPGenDist(
-            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_src_start_ip, p1_src_end_ip],
+            distribution=u"seq",
         )
         ip_gen_s = ASTFIPGenDist(
-            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
-            distribution=u"seq"
+            ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+            distribution=u"seq",
         )
         ip_gen = ASTFIPGen(
             glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
             dist_client=ip_gen_c,
-            dist_server=ip_gen_s
+            dist_server=ip_gen_s,
         )
 
         # server association
@@ -119,7 +115,7 @@ class TrafficProfile(TrafficProfileBaseClass):
             program=prog_c,
             ip_gen=ip_gen,
             limit=4128768,  # TODO: set via input parameter ?
-            port=8080
+            port=8080,
         )
         temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
         template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
diff --git a/resources/libraries/python/Constants.py b/resources/libraries/python/Constants.py
index 6bcf5413d9..bfbbfd7471 100644
--- a/resources/libraries/python/Constants.py
+++ b/resources/libraries/python/Constants.py
@@ -269,6 +269,14 @@ class Constants:
         u"PERF_TRIAL_ASTF_DELAY", 0.112
     )
 
+    # Number of data frames in TPUT transaction, used both by TCP and UDP.
+    # The value should be 33 to keep historic continuity for UDP TPUT tests,
+    # but we are limited by TRex window of 48 KiB, so for 9000B tests
+    # it means we can send only 5 full data frames in a burst.
+    # https://github.com/cisco-system-traffic-generator/
+    # trex-core/blob/v2.88/src/44bsd/tcp_var.h#L896-L903
+    ASTF_N_DATA_FRAMES = get_int_from_env(u"ASTF_N_DATA_FRAMES", 5)
+
     # Extended debug (incl. vpp packet trace, linux perf stat, ...).
     # Full list is available as suite variable (__init__.robot) or is
     # override by test.
diff --git a/resources/libraries/python/NATUtil.py b/resources/libraries/python/NATUtil.py
index ceed560a04..841bd2e683 100644
--- a/resources/libraries/python/NATUtil.py
+++ b/resources/libraries/python/NATUtil.py
@@ -278,7 +278,7 @@ class NATUtil:
 
     @staticmethod
     def get_nat44_sessions_number(node, proto):
-        """Get number of established NAT44 sessions from NAT44 mapping data.
+        """Get number of expected NAT44 sessions from NAT44 mapping data.
 
         This keyword uses output from a CLI command,
         so it can start failing when VPP changes the output format.
@@ -287,17 +287,21 @@ class NATUtil:
         The current implementation supports both 2202 and post-2202 format.
         (The Gerrit number changing the output format is 34877.)
 
-        For TCP proto, the post-2202 format includes "timed out"
-        established sessions into its count of total sessions.
+        For TCP proto, the expected state after rampup is
+        some number of sessions in transitory state (VPP has seen the FINs),
+        and some number of sessions in established state (meaning
+        some FINs were lost in the last trial).
+        While the two states may need slightly different number of cycles
+        to process next packet, the current implementation considers
+        both of them the "fast path", so they are both counted as expected.
+
         As the tests should fail if a session is timed-out,
-        the logic substracts timed out sessions for the resturned value.
+        the logic substracts timed out sessions for the returned value
+        (only available for post-2202 format).
 
-        The 2202 output reports most of TCP sessions as in "transitory" state,
-        as opposed to "established", but the previous CSIT logic tolerated that.
-        Ideally, whis keyword would add establised and transitory sessions
-        (but without CLOSED and WAIT_CLOSED sessions) and return that.
-        The current implementation simply returns "total tcp sessions" value,
-        to preserve the previous CSIT behavior for 2202 output.
+        TODO: Investigate if it is worth to insert additional rampup trials
+        in TPUT tests to ensure all sessions are transitory before next
+        measurement.
 
         :param node: DUT node.
         :param proto: Required protocol - TCP/UDP/ICMP.
@@ -328,9 +332,7 @@ class NATUtil:
                     found = True
                 continue
             # Proto is found, find the line we are interested in.
-            if proto_l == u"tcp" and u"established" not in line:
-                continue
-            if u"total" not in line and u"established" not in line:
+            if u"total" not in line:
                 raise RuntimeError(f"show nat summary: no {proto} total.")
             # We have the line with relevant numbers.
             total_part, timed_out_part = line.split(u"(", 1)
diff --git a/resources/libraries/python/TrafficGenerator.py b/resources/libraries/python/TrafficGenerator.py
index b2748f74ba..03e3890959 100644
--- a/resources/libraries/python/TrafficGenerator.py
+++ b/resources/libraries/python/TrafficGenerator.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -643,6 +643,9 @@ class TrafficGenerator(AbstractMeasurer):
         )
         command_line.add_with_value(u"duration", f"{computed_duration!r}")
         command_line.add_with_value(u"frame_size", self.frame_size)
+        command_line.add_with_value(
+            u"n_data_frames", Constants.ASTF_N_DATA_FRAMES
+        )
         command_line.add_with_value(u"multiplier", multiplier)
         command_line.add_with_value(u"port_0", p_0)
         command_line.add_with_value(u"port_1", p_1)
@@ -811,7 +814,7 @@ class TrafficGenerator(AbstractMeasurer):
             use_latency=False,
             ramp_up_rate=None,
             ramp_up_duration=None,
-            state_timeout=300.0,
+            state_timeout=240.0,
             ramp_up_only=False,
         ):
         """Send traffic from all configured interfaces on TG.
@@ -1215,7 +1218,7 @@ class TrafficGenerator(AbstractMeasurer):
         The target_tr field of ReceiveRateMeasurement is in
         transactions per second. Transmit count and loss count units
         depend on the transaction type. Usually they are in transactions
-        per second, or aggregate packets per second.
+        per second, or aggregated packets per second.
 
         TODO: Fail on running or already reported measurement.
 
@@ -1382,7 +1385,7 @@ class TrafficGenerator(AbstractMeasurer):
             use_latency=False,
             ramp_up_rate=None,
             ramp_up_duration=None,
-            state_timeout=300.0,
+            state_timeout=240.0,
         ):
         """Store values accessed by measure().
 
@@ -1451,7 +1454,7 @@ class OptimizedSearch:
     """Class to be imported as Robot Library, containing search keywords.
 
     Aside of setting up measurer and forwarding arguments,
-    the main business is to translate min/max rate from unidir to aggregate.
+    the main business is to translate min/max rate from unidir to aggregated.
     """
 
     @staticmethod
@@ -1475,7 +1478,7 @@ class OptimizedSearch:
             use_latency=False,
             ramp_up_rate=None,
             ramp_up_duration=None,
-            state_timeout=300.0,
+            state_timeout=240.0,
             expansion_coefficient=4.0,
     ):
         """Setup initialized TG, perform optimized search, return intervals.
@@ -1616,7 +1619,7 @@ class OptimizedSearch:
             use_latency=False,
             ramp_up_rate=None,
             ramp_up_duration=None,
-            state_timeout=300.0,
+            state_timeout=240.0,
     ):
         """Setup initialized TG, perform soak search, return avg and stdev.
 
@@ -1674,7 +1677,7 @@ class OptimizedSearch:
         :type ramp_up_rate: float
         :type ramp_up_duration: float
         :type state_timeout: float
-        :returns: Average and stdev of estimated aggregate rate giving PLR.
+        :returns: Average and stdev of estimated aggregated rate giving PLR.
         :rtype: 2-tuple of float
         """
         tg_instance = BuiltIn().get_library_instance(
diff --git a/resources/libraries/python/autogen/Regenerator.py b/resources/libraries/python/autogen/Regenerator.py
index 3011b06897..4474996ef1 100644
--- a/resources/libraries/python/autogen/Regenerator.py
+++ b/resources/libraries/python/autogen/Regenerator.py
@@ -17,6 +17,7 @@ TODO: How can we check each suite id is unique,
       when currently the suite generation is run on each directory separately?
 """
 
+import copy
 import sys
 
 from glob import glob
@@ -116,6 +117,39 @@ def check_suite_tag(suite_tag, prolog):
         raise ValueError(f"Suite tag found {found} times for {suite_tag}")
 
 
+def filter_and_edit_kwargs_for_astf(suite_id, kwargs):
+    """Return possibly edited kwargs, or None if to be skipped.
+
+    This is a code block used in few places.
+    Kwargs is (a copy of) one item from tc_kwargs_list.
+    Currently, the editable field is frame_size,
+    to be increased to for tests with data (not just CPS).
+
+    :param suite_id: Suite ID.
+    :param kwargs: Key-value pairs used to construct one testcase.
+    :type suite_id: str
+    :type tc_kwargs_list: dict
+    :returns: Edited kwargs.
+    :rtype Optional[dict]
+    """
+    if u"-cps-" in suite_id:
+        # Contrary to UDP, there is no place to affect frame size
+        # in TCP CPS tests. Actual frames are close to min size.
+        # UDP uses the min value too, for fairer comparison to TCP.
+        if kwargs[u"frame_size"] not in MIN_FRAME_SIZE_VALUES:
+            return None
+    elif (u"-pps-" in suite_id or u"-tput-" in suite_id):
+        if u"imix" in str(kwargs[u"frame_size"]).lower():
+            # ASTF does not support IMIX (yet).
+            return None
+        if kwargs[u"frame_size"] in MIN_FRAME_SIZE_VALUES:
+            # Minimal (TRex) TCP data frame is 80B for IPv4.
+            # In future, we may want to have also IPv6 TCP.
+            # UDP uses the same value, for fairer comparison to TCP.
+            kwargs[u"frame_size"] = 100
+    return kwargs
+
+
 def add_default_testcases(testcase, iface, suite_id, file_out, tc_kwargs_list):
     """Add default testcases to file.
 
@@ -130,7 +164,9 @@ def add_default_testcases(testcase, iface, suite_id, file_out, tc_kwargs_list):
     :type file_out: file
     :type tc_kwargs_list: dict
     """
-    for kwargs in tc_kwargs_list:
+    for kwas in tc_kwargs_list:
+        # We may edit framesize for ASTF, the copy should be local.
+        kwargs = copy.deepcopy(kwas)
         # TODO: Is there a better way to disable some combinations?
         emit = True
         if kwargs[u"frame_size"] == 9000:
@@ -156,14 +192,8 @@ def add_default_testcases(testcase, iface, suite_id, file_out, tc_kwargs_list):
                 emit = False
             if kwargs[u"frame_size"] not in MIN_FRAME_SIZE_VALUES:
                 emit = False
-        if (
-                u"-cps-" in suite_id
-                or u"-pps-" in suite_id
-                or u"-tput-" in suite_id
-        ):
-            if kwargs[u"frame_size"] not in MIN_FRAME_SIZE_VALUES:
-                emit = False
-        if emit:
+        kwargs = filter_and_edit_kwargs_for_astf(suite_id, kwargs)
+        if emit and kwargs is not None:
             file_out.write(testcase.generate(**kwargs))
 
 
@@ -207,17 +237,11 @@ def add_trex_testcases(testcase, suite_id, file_out, tc_kwargs_list):
     :type file_out: file
     :type tc_kwargs_list: dict
     """
-    for kwargs in tc_kwargs_list:
-        # TODO: Is there a better way to disable some combinations?
-        emit = True
-        if (
-                u"-cps-" in suite_id
-                or u"-pps-" in suite_id
-                or u"-tput-" in suite_id
-        ):
-            if kwargs[u"frame_size"] not in MIN_FRAME_SIZE_VALUES:
-                emit = False
-        if emit:
+    for kwas in tc_kwargs_list:
+        # We may edit framesize for ASTF, the copy should be local.
+        kwargs = copy.deepcopy(kwas)
+        kwargs = filter_and_edit_kwargs_for_astf(suite_id, kwargs)
+        if kwargs is not None:
             file_out.write(testcase.generate(**kwargs))
 
 
diff --git a/resources/libraries/robot/performance/performance_display.robot b/resources/libraries/robot/performance/performance_display.robot
index db2b522091..a6df6f7b3a 100644
--- a/resources/libraries/robot/performance/performance_display.robot
+++ b/resources/libraries/robot/performance/performance_display.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -46,19 +46,19 @@
 | | ... | ${message}${\n}${message_zero} | ${message}${\n}${message_other}
 | | Fail | ${message}
 
-| Compute bandwidth
+| Compute Bandwidth
 | | [Documentation]
 | | ... | Compute (bidir) bandwidth from given (unidir) transaction rate.
 | | ...
-| | ... | This keyword reads "ppta" and "avg_frame_size" set elsewhere.
-| | ... | The implementation should work for both pps and cps rates.
+| | ... | This keyword reads \${ppta} and \${avg_aggregated_frame_size} set
+| | ... | elsewhere. The implementation should work for both pps and cps rates.
 | | ... |
 | | ... | *Arguments:*
 | | ... | - tps - Transaction rate (unidirectional) [tps]. Type: float
 | | ...
 | | ... | *Returns:*
 | | ... | - Computed bandwidth in Gbps.
-| | ... | - Computed aggregate packet rate in pps.
+| | ... | - Computed aggregated packet rate in pps.
 | |
 | | ... | *Example:*
 | |
@@ -68,7 +68,7 @@
 | |
 | | ${ppta} = | Get Packets Per Transaction Aggregated
 | | ${pps} = | Evaluate | ${tps} * ${ppta}
-| | ${bandwidth} = | Evaluate | ${pps} * (${avg_frame_size}+20)*8 / 1e9
+| | ${bandwidth} = | Evaluate | ${pps} * (${avg_aggregated_frame_size}+20)*8/1e9
 | | Return From Keyword | ${bandwidth} | ${pps}
 
 | Display Reconfig Test Message
@@ -96,7 +96,7 @@
 | Display result of NDRPDR search
 | | [Documentation]
 | | ... | Display result of NDR+PDR search, both quantities, both bounds,
-| | ... | aggregate in units given by trasaction type, e.g. by default
+| | ... | aggregated, in units given by trasaction type, e.g. by default
 | | ... | in packet per seconds and Gbps total bandwidth
 | | ... | (for initial packet size).
 | | ... |
@@ -115,7 +115,7 @@
 | | ... | - transaction_type - String identifier to determine how to count
 | | ... | transactions. Default is "packet".
 | | ... | *Arguments:*
-| | ... | - result - Measured result data. Aggregate rate, tps or pps.
+| | ... | - result - Measured result data. Aggregated rate, tps or pps.
 | | ... | Type: NdrPdrResult
 | |
 | | ... | *Example:*
@@ -175,7 +175,7 @@
 | | ... | it is in transactions per second. Bidirectional traffic
 | | ... | transaction is understood as having 2 packets, for this purpose.
 | | ... |
-| | ... | Pps values are aggregate in packet per seconds,
+| | ... | Pps values are aggregated, in packet per seconds
 | | ... | and Gbps total bandwidth (for initial packet size).
 | | ... |
 | | ... | Througput is calculated as:
@@ -231,8 +231,8 @@
 
 | Display single pps bound
 | | [Documentation]
-| | ... | Display one pps bound of NDR+PDR search,
-| | ... | aggregate in packet per seconds and Gbps total bandwidth
+| | ... | Display one pps bound of NDR+PDR search, aggregated,
+| | ... | in packet per seconds and Gbps total bandwidth
 | | ... | (for initial packet size).
 | | ... |
 | | ... | The bound to display is given as target transfer rate, it is assumed
diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot
index 8350db0205..c90fc7434d 100644
--- a/resources/libraries/robot/performance/performance_utils.robot
+++ b/resources/libraries/robot/performance/performance_utils.robot
@@ -46,7 +46,7 @@
 | | ... | Display results as formatted test message.
 | | ... | Fail if computed lower bound is 110% of the minimal rate or less.
 | | ... | Input rates are unidirectional, in transaction per second.
-| | ... | Reported result may contain aggregate pps rates, depending on test.
+| | ... | Reported result may contain aggregated pps rates, depending on test.
 | | ... | Call \${resetter} (if defined) to reset DUT state before each trial.
 | |
 | | ... | *Test (or broader scope) variables read:*
@@ -105,7 +105,7 @@
 | | ... | Display findings as a formatted test message.
 | | ... | Fail if a resulting lower bound has too high loss ratio.
 | | ... | Input rates are unidirectional, in transaction per second.
-| | ... | Reported result may contain aggregate pps rates, depending on test.
+| | ... | Reported result may contain aggregated pps rates, depending on test.
 | | ... | Additional latency measurements are performed for smaller loads,
 | | ... | even if latency stream is disabled in search. Their results
 | | ... | are also displayed.
@@ -468,7 +468,7 @@
 | | ... | *Arguments:*
 | | ... | - trial_duration - Duration of single trial [s].
 | | ... | Type: float
-| | ... | - rate - Target aggregate transmit rate [bps] / Bits per second
+| | ... | - rate - Target aggregated transmit rate [bps] / Bits per second.
 | | ... | Type: float
 | | ... | - frame_size - L2 Frame Size [B].
 | | ... | Type: integer or string
diff --git a/resources/libraries/robot/performance/performance_vars.robot b/resources/libraries/robot/performance/performance_vars.robot
index 4f2cc50fa3..f75d585e4b 100644
--- a/resources/libraries/robot/performance/performance_vars.robot
+++ b/resources/libraries/robot/performance/performance_vars.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -155,11 +155,11 @@
 | Get Packets Per Transaction Aggregated
 | | [Documentation]
 | | ... | Return value of \${packets_per_transaction_aggregated};
-| | ... | if not defined, assume traffic is symmetric and compute
-| | ... | from unidirectional values.
+| | ... | if not defined, assume traffic is symmetric (or unidirectional)
+| | ... | and compute from unidirectional values.
 | |
-| | ... | The return value is used when reporting PPS values from TPS found
-| | ... | by some search (e.g. NDRPDR).
+| | ... | The return value is used when reporting PPS (and bandwidth) values
+| | ... | from TPS found by some search (e.g. NDRPDR).
 | | ... | Return type: integer.
 | |
 | | ... | *Example:*
@@ -169,7 +169,6 @@
 | | ${ppta} = | Get Variable Value | \${packets_per_transaction_aggregated}
 | | ... | ${0}
 | | Return From Keyword If | "${ppta}" != "0" | ${ppta}
-| | # TODO: Insert TCP computation from packet size here.
 | | ${pptad} = | Get Packets Per Transaction And Direction
 | | ${traffic_directions} = | Get Traffic Directions
 | | # We do not support ASTF profiles with multiple transactions, yet.
@@ -181,8 +180,9 @@
 | | ... | Return value of \${packets_per_transaction_and_direction},
 | | ... | or ${1} if not defined.
 | |
-| | ... | The return value is used when computing max rate (TPS),
-| | ... | so for asymmetric transaction use the more numerous direction.
+| | ... | The return value is used when computing max rate (TPS)
+| | ... | from packet level (pps or bps) limits.
+| | ... | For asymmetric transactions, use the more numerous direction.
 | | ... | Return type: integer.
 | |
 | | ... | *Example:*
@@ -392,19 +392,14 @@
 
 | Set Jumbo
 | | [Documentation]
-| | ... | For jumbo frames detection, the maximal packet size is relevant,
-| | ... | encapsulation overhead (if any) has effect.
-| |
-| | ... | This keyword computes jumbo boolean (some suites need that for
-| | ... | configuration decisions).
+| | ... | Call Set Numeric Frame Sizes and set jumbo based on max framesize.
 | | ... | To streamline suite autogeneration, both input and output values
 | | ... | are communicated as test (or broader scope) variables,
 | | ... | instead of explicit arguments and return values.
 | |
 | | ... | *Test (or broader scope) variables read:*
 | | ... | - overhead - Overhead in bytes; default value: 0. Type: integer
-| | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
-| | ... | string
+| | ... | - frame_size - Framesize. Type: integer or string
 | |
 | | ... | *Test variables set:*
 | | ... | - jumbo - Jumbo boolean, true if jumbo packet support has to be
@@ -414,32 +409,22 @@
 | |
 | | ... | \| Set Jumbo \|
 | |
-| | # Already called by Set Max Rate And Jumbo, but some suites (e.g. device)
-| | # are calling this directly.
+| | # Some suites (e.g. device) are not calling Set Max Rate And Jumbo.
 | | Set Numeric Frame Sizes
-| | ${jumbo} = | Set Variable If | ${max_frame_size} < 1522
-| | ... | ${False} | ${True}
+| | ${jumbo} = | Evaluate | ${max_frame_size} >= 1522
 | | Set Test Variable | \${jumbo}
 
 | Set Max Rate And Jumbo
 | | [Documentation]
-| | ... | Input framesize can be either integer in case of a single packet
-| | ... | in stream, or IMIX string defining mix of packets.
-| | ... | For jumbo frames detection, the maximal packet size is relevant.
-| | ... | For maximal transmit rate, the average packet size is relevant.
-| | ... | In both cases, encapsulation overhead (if any) has effect.
-| | ... | The maximal rate is computed from NIC name.
-| | ... | The implementation works by mapping from exact
-| | ... | whitelisted NIC names.
-| | ... | The mapping is hardcoded in nic_limits.yaml
-| | ... | TODO: Make the mapping from NIC names case insensistive.
-| |
 | | ... | This keyword computes maximal unidirectional transmit rate
 | | ... | and jumbo boolean (some suites need that for configuration decisions).
 | | ... | To streamline suite autogeneration, both input and output values
 | | ... | are communicated as test (or broader scope) variables,
 | | ... | instead of explicit arguments and return values.
 | |
+| | ... | For correctly applying bandwidth limit, average frame size is used,
+| | ... | see Set Numeric Frame Sizes keyword documentation for details.
+| |
 | | ... | If this keyword detects the test is interested in (unidirectional)
 | | ... | transactons per second maximal rate (tps), that is returned (not pps).
 | |
@@ -448,8 +433,13 @@
 | | ... | - overhead - Overhead in bytes; default value: 0. Type: integer
 | | ... | - frame_size - L2 Frame Size [B] or IMIX string. Type: integer or
 | | ... | string
-| | ... | - packets_per_transaction_and_direction - Pps-tps conversion.
-| | ... | Optional, default 1.
+| | ... | - ASTF_N_DATA_FRAMES - Number of data frames per transaction
+| | ... | and direction. Type: integer
+| | ... | - packets_per_transaction_and_direction - May be unset.
+| | ... | See Get Packets Per Transaction And Direction keyword. Type: integer
+| | ... | - packets_per_transaction_aggregated - May be unset.
+| | ... | See Get Packets Per Transaction Aggregated keyword. Type: integer
+| | ... | - TEST_TAGS - Robot tags of this test. Type: list of string
 | |
 | | ... | *Test variables set:*
 | | ... | - max_rate - Calculated unidirectional maximal transmit rate [pps].
@@ -457,8 +447,11 @@
 | | ... | Type: float
 | | ... | - jumbo - Jumbo boolean, true if jumbo packet support has to be
 | | ... | enabled. Type: boolean
-| | ... | avg_frame_size - Average frame size including overhead. Type: float
-| | ... | max_frame_size - Maximal frame size including overhead. Type: float
+| | ... | - max_frame_size - Maximal frame size including overhead. Type: float
+| | ... | - avg_directional_frame_size - Average frame size including overhead
+| | ... | for the more loaded direction. Type: float
+| | ... | - avg_aggregated_frame_size - Average frame size including overhead
+| | ... | across both traffic directions. Type: float
 | |
 | | ... | *Example:*
 | |
@@ -470,68 +463,188 @@
 | | ... | ${NIC_NAME_TO_PPS_LIMIT} | ${nic_name}
 | | ${bps_limit} = | Get From Dictionary
 | | ... | ${NIC_NAME_TO_BPS_LIMIT} | ${nic_name}
-| | Set Numeric Frame Sizes
-| | # We need to add 20B (Ethernet preamble and inter-frame gap)
-| | # to avg_frame_size
-| | ${rate} = | Evaluate | ${bps_limit} / ((${avg_frame_size} + 20.0) * 8)
+| | # Set Jumbo also calls Set Numeric Frame Sizes.
+| | Set Jumbo
+| | # We need to add 20B (Ethernet preamble and inter-frame gap).
+| | ${adfs} = | Get Variable Value | \${avg_directional_frame_size}
+| | ${rate} = | Evaluate | ${bps_limit} / ((${adfs} + 20.0) * 8)
 | | ${max_rate} = | Set Variable If | ${rate} > ${pps_limit}
 | | ... | ${pps_limit} | ${rate}
 | | ${pptad} = | Get Packets Per Transaction And Direction
 | | ${max_rate} = | Evaluate | ${max_rate} / ${pptad}
 | | Set Test Variable | \${max_rate}
-| | Set Jumbo
 
 | Set Numeric Frame Sizes
 | | [Documentation]
 | | ... | Framesize can be either integer in case of a single packet
 | | ... | in stream, or set of packets in case of IMIX type or simmilar.
 | | ... | For jumbo decisions, we need a numeric size of the biggest packet.
-| | ... | For max rate decisions, we need a numeric average packet size.
-| | ... | This keyword computes both and sets them as test variables.
+| | ... | For bandwidth limit decisions, we need a numeric average packet size
+| | ... | in the more bit intensive direction if traffic is non-symmetric.
+| | ... | Computation of max_rate assumes it is also the more pps direction
+| | ... | (so it can have smaller average frame size than the aggregated one).
+| | ... | Average (across both directions) frame size is also used
+| | ... | for displaying the bidirectional bandwidth forwarded.
+| | ... | This keyword computes all three values (accounting for overheads)
+| | ... | and sets them as test variables.
 | |
 | | ... | Each suite sets a value named \${overhead},
 | | ... | which describes by how many bytes the frames on DUT-DUT link
 | | ... | are larger (due to encapsulation) than those
-| | ... | on the primary TG-DUT link. But for some suites that value
+| | ... | on the primary TG-DUT link. For some suites that value
 | | ... | can be negaive (if TG-DUT is encapsulated more heavily).
 | | ... | For calculations in this keyword, we need largest sizes
 | | ... | across links, so zero is used if \${overhead} is negative.
 | |
+| | ... | The other overhead is from TCP control packets (only IPv4 supported).
+| | ... | TCP_CPS tests have SYN frames of length 78B and other frames 70B.
+| | ... | The more loaded is client-to-server direction with 1 SYN and 3 other,
+| | ... | across both directions it is 2 SYN and 5 other.
+| | ... | TCP_PPS and TCP_TPUT tests have one other control packet less
+| | ... | (in the less loaded direction), but they do contain data frames.
+| |
 | | ... | *Test variables read:*
 | | ... | - frame_size - Framesize. Type: integer or string
 | | ... | - overhead - Overhead in bytes; default value: ${0}. Type: integer
+| | ... | - ASTF_N_DATA_FRAMES - Number of data frames per transaction
+| | ... | and direction. Type: integer
+| | ... | - packets_per_transaction_and_direction - May be unset.
+| | ... | See Get Packets Per Transaction And Direction keyword. Type: integer
+| | ... | - packets_per_transaction_aggregated - May be unset.
+| | ... | See Get Packets Per Transaction Aggregated keyword. Type: integer
+| | ... | - TEST_TAGS - Robot tags of this test. Type: list of string
 | |
 | | ... | *Test variables set*
-| | ... | avg_frame_size - Average frame size including overhead. Type: float
-| | ... | max_frame_size - Maximal frame size including overhead. Type: float
+| | ... | - max_frame_size - Maximal frame size including overhead. Type: float
+| | ... | - avg_directional_frame_size - Average frame size including overhead
+| | ... | for the more loaded direction. Type: float
+| | ... | - avg_aggregated_frame_size - Average frame size including overhead
+| | ... | across both traffic directions. Type: float
 | |
 | | ... | *Example:*
 | |
 | | ... | \| Set Numeric Frame Sizes \|
 | |
+| | ${bare_max_frame_size} = | Run Keyword If
+| | ... | '${frame_size}' == 'IMIX_v4_1' | Set Variable | ${1518.0}
+| | ... | ELSE | Convert To Number | ${frame_size}
+| | ${bafs} = | Run Keyword If
+| | ... | '${frame_size}' == 'IMIX_v4_1' | Set Variable | ${353.8333333333333}
+| | ... | ELSE | Convert To Number | ${frame_size}
+| | # Long boolean formula in 2 lines.
+| | ${is_tcp_pps} = | Evaluate | 'TCP_PPS' in ${TEST_TAGS}
+| | ${is_tcp_tput} = | Evaluate | ${is_tcp_pps} or 'TCP_TPUT' in ${TEST_TAGS}
+| | ${avg_dir_frame_size} | ${avg_agg_frame_size} = | Run Keyword If
+| | ... | 'TCP_CPS' in ${TEST_TAGS} | Apply Tcp Cps Proto Overhead | ${bafs}
+| | ... | ELSE IF | ${is_tcp_tput} | Apply Tcp Tput Proto Overhead | ${bafs}
+| | ... | ELSE | Set Variable | ${bafs} | ${bafs}
 | | ${max_overhead} = | Set Variable If | ${overhead} >= 0 | ${overhead} | ${0}
-| | ${bare_avg_frame_size} = | Run Keyword If | '${frame_size}' == 'IMIX_v4_1'
-| | ... | Set Variable | ${353.83333}
-| | ... | ELSE
-| | ... | Convert To Number | ${frame_size}
-| | # Do not use $max_overhead (without braces), that does not tolerate string.
-| | ${avg_frame_size} = | Evaluate | ${bare_avg_frame_size} + ${max_overhead}
-| | Set Test Variable | \${avg_frame_size}
-| | ${bare_max_frame_size} = | Run Keyword If | '${frame_size}' == 'IMIX_v4_1'
-| | ... | Set Variable | ${1518}
-| | ... | ELSE
-| | ... | Convert To Number | ${frame_size}
-| | ${max_frame_size} = | Evaluate | $bare_max_frame_size + $max_overhead
-| | Set Test Variable | ${max_frame_size}
+| | ${mfs} = | Evaluate | ${bare_max_frame_size} + ${max_overhead}
+| | ${adfs} = | Evaluate | ${avg_dir_frame_size} + ${max_overhead}
+| | ${aafs} = | Evaluate | ${avg_agg_frame_size} + ${max_overhead}
+| | Set Test Variable | \${max_frame_size} | ${mfs}
+| | Set Test Variable | \${avg_directional_frame_size} | ${adfs}
+| | Set Test Variable | \${avg_aggregated_frame_size} | ${aafs}
+
+| Apply Tcp Cps Proto Overhead
+| | [Documentation]
+| | ... | Recompute average frame size for TCP CPS test cases.
+| |
+| | ... | This is contitionally called from Set Numeric Frame Sizes.
+| | ... | In Robot Framework it is more convenient to wrap such a block
+| | ... | as a standalone keyword to Run Keyword If.
+| |
+| | ... | *Test variables read:*
+| | ... | - ASTF_N_DATA_FRAMES - Number of data frames per transaction
+| | ... | and direction. Usually set globally. Type: integer
+| | ... | - packets_per_transaction_and_direction - May be unset.
+| | ... | See Get Packets Per Transaction And Direction keyword. Type: integer
+| | ... | - packets_per_transaction_aggregated - May be unset.
+| | ... | See Get Packets Per Transaction Aggregated keyword. Type: integer
+| |
+| | ... | *Arguments:*
+| | ... | - bare_avg_frame_size - Average numeric framesize without overheads.
+| |
+| | ... | *Returns:*
+| | ... | - avg_dir_frame_size - Average framesize for more loaded direction.
+| | ... | - avg_agg_frame_size - Average framesize across both directions.
+| |
+| | ... | *Example:*
+| |
+| | ... | \| \${adfs} \| \${aafs} = \| Apply Tcp Cps Proto Overhead \| \${bafs}
+| |
+| | [Arguments] | ${bare_avg_frame_size}
+| |
+| | # Increase max_frame_size for TCP tests if used for more than just jumbo.
+| | Run Keyword If | ${bare_avg_frame_size} != 64
+| | ... | Fail | TCP_CPS tests are only supported for (nominal) 64B frames.
+| | # TODO: Unify with packets_per_transaction_* variables when adding PCAP.
+| | ${pptad} = | Get Packets Per Transaction And Direction
+| | ${ppta} = | Get Packets Per Transaction Aggregated
+| | ${avg_dir_frame_size} = | Evaluate | (78.0 * 1 + 70.0 * 3) / (1 + 3)
+| | Run Keyword If | '${pptad}' != '4'
+| | ... | Fail | TCP CPS with pptad '${pptad}' != '4'.
+| | ${avg_agg_frame_size} = | Evaluate | (78.0 * 2 + 70.0 * 5) / (2 + 5)
+| | Run Keyword If | '${ppta}' != '7'
+| | ... | Fail | TCP CPS with ppta '${ppta}' != '7'.
+| | Return From Keyword | ${avg_dir_frame_size} | ${avg_agg_frame_size}
+
+| Apply Tcp Tput Proto Overhead
+| | [Documentation]
+| | ... | Recompute average frame size for TCP TPUT (or PPS) test cases.
+| |
+| | ... | This is contitionally called from Set Numeric Frame Sizes.
+| | ... | In Robot Framework it is more convenient to wrap such a block
+| | ... | as a standalone keyword to Run Keyword If.
+| |
+| | ... | *Test variables read:*
+| | ... | - ASTF_N_DATA_FRAMES - Number of data frames per transaction
+| | ... | and direction. Usually set globally. Type: integer
+| | ... | - packets_per_transaction_and_direction - May be unset.
+| | ... | See Get Packets Per Transaction And Direction keyword. Type: integer
+| | ... | - packets_per_transaction_aggregated - May be unset.
+| | ... | See Get Packets Per Transaction Aggregated keyword. Type: integer
+| |
+| | ... | *Arguments:*
+| | ... | - bare_framesize - Average numeric framesize without overheads.
+| |
+| | ... | *Returns:*
+| | ... | - avg_dir_frame_size - Average framesize for more loaded direction.
+| | ... | - avg_agg_frame_size - Average framesize across both directions.
+| |
+| | ... | *Example:*
+| |
+| | ... | \| \${adfs} \| \${aafs} = \| Apply Tcp Cps Proto Overhead \| \${bafs}
+| |
+| | [Arguments] | ${bare_framesize}
+| |
+| | # TODO: Unify with packets_per_transaction_* variables when adding PCAP.
+| | ${pptad} = | Get Packets Per Transaction And Direction
+| | ${ppta} = | Get Packets Per Transaction Aggregated
+| | # Long float formula in 4 lines.
+| | ${numerator} = | Evaluate | ${bare_framesize} * ${ASTF_N_DATA_FRAMES}
+| | ${numerator} = | Evaluate | 78.0 * 1 + 70.0 * 3 + ${numerator}
+| | ${denominator} = | Evaluate | 1 + 3 + ${ASTF_N_DATA_FRAMES}
+| | ${avg_dir_frame_size} = | Evaluate | ${numerator} / ${denominator}
+| | Run Keyword If | '${pptad}' != '${denominator}'
+| | ... | Fail | TCP TPUT with pptad '${pptad}' != '${denominator}'.
+| | # Long float formula in 4 lines.
+| | ${numerator} = | Evaluate | ${bare_framesize} * 2 * ${ASTF_N_DATA_FRAMES}
+| | ${numerator} = | Evaluate | 78.0 * 2 + 70.0 * 4 + ${numerator}
+| | ${denominator} = | Evaluate | 2 + 4 + 2 * ${ASTF_N_DATA_FRAMES}
+| | ${avg_agg_frame_size} = | Evaluate | ${numerator} / ${denominator}
+| | Run Keyword If | '${ppta}' != '${denominator}'
+| | ... | Fail | TCP TPUT with ppta '${ppta}' != '${denominator}'.
+| | Return From Keyword | ${avg_dir_frame_size} | ${avg_agg_frame_size}
 
 | Set Rates For Policer
 | | [Documentation]
 | | ... | Policer tests need these values,
-| | ... | currently computed from \${avg_frame_size}.
+| | ... | currently computed from \${avg_directional_frame_size}.
 | | ... | TODO: Verify the units match and computation is correct.
 | |
 | | ... | *Test (or broader scope) variables read:*
-| | ... | - avg_frame_size - Average L2 Frame Size [B]. Type: float
+| | ... | - avg_directional_frame_size - Average L2 Frame Size [B]. Type: float
 | | ... | Set by Set Max Rate And Jumbo keyword.
 | |
 | | ... | *Test variables set:*
@@ -542,5 +655,5 @@
 | |
 | | ... | \| Set Rates For Policer \|
 | |
-| | Set Test Variable | \${eb} | ${avg_frame_size}
-| | Set Test Variable | \${cb} | ${avg_frame_size}
+| | Set Test Variable | \${eb} | ${avg_directional_frame_size}
+| | Set Test Variable | \${cb} | ${avg_directional_frame_size}
diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
index 2aff856510..eb4561cdf0 100644
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
@@ -57,7 +57,8 @@
 # Scale settings
 | ${n_hosts}= | ${1024}
 | ${n_ports}= | ${63}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
@@ -82,6 +83,14 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B--ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr
-| | [Tags] | 64B
-| | frame_size=${64}
+| 100B--ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr
+| | [Tags] | 100B
+| | frame_size=${100}
+
+| 1518B--ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr
+| | [Tags] | 1518B
+| | frame_size=${1518}
+
+| 9000B--ethip4tcp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr
+| | [Tags] | 9000B
+| | frame_size=${9000}
diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
index d898b08fe0..7d9ac98b3a 100644
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
@@ -57,7 +57,8 @@
 # Scale settings
 | ${n_hosts}= | ${262144}
 | ${n_ports}= | ${63}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
@@ -82,6 +83,14 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B--ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr
-| | [Tags] | 64B
-| | frame_size=${64}
+| 100B--ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr
+| | [Tags] | 100B
+| | frame_size=${100}
+
+| 1518B--ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr
+| | [Tags] | 1518B
+| | frame_size=${1518}
+
+| 9000B--ethip4tcp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr
+| | [Tags] | 9000B
+| | frame_size=${9000}
diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
index 9fee391975..9d94da78b3 100644
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr.robot
@@ -58,7 +58,7 @@
 | ${n_hosts}= | ${1024}
 | ${n_ports}= | ${63}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -82,6 +82,14 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B--ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr
-| | [Tags] | 64B
-| | frame_size=${64}
+| 100B--ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr
+| | [Tags] | 100B
+| | frame_size=${100}
+
+| 1518B--ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr
+| | [Tags] | 1518B
+| | frame_size=${1518}
+
+| 9000B--ethip4udp-ip4base-h1024-p63-s64512-pps-tg-ndrpdr
+| | [Tags] | 9000B
+| | frame_size=${9000}
diff --git a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
index 7f19359f1a..547c21412e 100644
--- a/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
+++ b/tests/trex/perf/ip4/1n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr.robot
@@ -57,7 +57,7 @@
 | ${n_hosts}= | ${262144}
 | ${n_ports}= | ${63}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -81,6 +81,14 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B--ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr
-| | [Tags] | 64B
-| | frame_size=${64}
+| 100B--ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr
+| | [Tags] | 100B
+| | frame_size=${100}
+
+| 1518B--ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr
+| | [Tags] | 1518B
+| | frame_size=${1518}
+
+| 9000B--ethip4udp-ip4base-h262144-p63-s16515072-pps-tg-ndrpdr
+| | [Tags] | 9000B
+| | frame_size=${9000}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
index 276e71df99..ed44269117 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -66,7 +66,8 @@
 # Scale settings
 | ${n_hosts}= | ${1024}
 | ${n_ports}= | ${63}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
@@ -109,14 +110,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
index 3765ee6cbe..87cfbcb9d3 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -66,7 +66,8 @@
 # Scale settings
 | ${n_hosts}= | ${16384}
 | ${n_ports}= | ${63}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
@@ -109,14 +110,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
index b126444065..d21184b5e0 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -66,7 +66,8 @@
 # Scale settings
 | ${n_hosts}= | ${262144}
 | ${n_ports}= | ${63}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
@@ -109,14 +110,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
index 6b6cf171a2..d3cf02573f 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -66,7 +66,8 @@
 # Scale settings
 | ${n_hosts}= | ${4096}
 | ${n_ports}= | ${63}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
@@ -109,14 +110,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
index 8d2f9dec78..35100bf88e 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -66,7 +66,8 @@
 # Scale settings
 | ${n_hosts}= | ${65536}
 | ${n_ports}= | ${63}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
@@ -109,14 +110,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
index e2f1ab3eb1..89bc7d9ace 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,7 +85,8 @@
 | ${n_hosts}= | ${1024}
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${n_sessions}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
@@ -128,14 +129,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
index 964eac7611..a14a655cf6 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,10 +85,11 @@
 | ${n_hosts}= | ${1024}
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${n_sessions}
 # Ramp-up settings
-| ${ramp_up_rate}= | ${70000}
+| ${ramp_up_rate}= | ${30000}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
 | ${transaction_type}= | tcp_pps
@@ -133,14 +134,38 @@
 | | And Verify NAT44 TCP sessions number on DUT1 node
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
index 08cb4ed209..9c9ae4de3f 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,7 +85,8 @@
 | ${n_hosts}= | ${16384}
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${n_sessions}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
@@ -128,14 +129,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
index edc2629706..1c7855630e 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,10 +85,11 @@
 | ${n_hosts}= | ${16384}
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${n_sessions}
 # Ramp-up settings
-| ${ramp_up_rate}= | ${70000}
+| ${ramp_up_rate}= | ${30000}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
 | ${transaction_type}= | tcp_pps
@@ -133,14 +134,38 @@
 | | And Verify NAT44 TCP sessions number on DUT1 node
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
index 7b7ebc8787..f4d27549bb 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,7 +85,8 @@
 | ${n_hosts}= | ${262144}
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${n_sessions}
 # Main heap size multiplicator
 | ${heap_size_mult}= | ${7}
@@ -130,14 +131,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
index 8154b1d0a2..3758c30dd2 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,12 +85,13 @@
 | ${n_hosts}= | ${262144}
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${n_sessions}
 # Main heap size multiplicator
 | ${heap_size_mult}= | ${7}
 # Ramp-up settings
-| ${ramp_up_rate}= | ${70000}
+| ${ramp_up_rate}= | ${30000}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
 | ${transaction_type}= | tcp_pps
@@ -135,14 +136,38 @@
 | | And Verify NAT44 TCP sessions number on DUT1 node
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
index b9a4c49786..34b90c95d3 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,7 +85,8 @@
 | ${n_hosts}= | ${4096}
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${n_sessions}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
@@ -128,14 +129,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
index 927ba9b8a8..e006a1b2bc 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,10 +85,11 @@
 | ${n_hosts}= | ${4096}
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${n_sessions}
 # Ramp-up settings
-| ${ramp_up_rate}= | ${70000}
+| ${ramp_up_rate}= | ${30000}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
 | ${transaction_type}= | tcp_pps
@@ -133,14 +134,38 @@
 | | And Verify NAT44 TCP sessions number on DUT1 node
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
index 691c320443..82279bb270 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,7 +85,8 @@
 | ${n_hosts}= | ${65536}
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${n_sessions}
 # Main heap size multiplicator
 | ${heap_size_mult}= | ${2}
@@ -130,14 +131,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
index 7011470869..0ab425b9b0 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,12 +85,13 @@
 | ${n_hosts}= | ${65536}
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${11}
+| ${packets_per_transaction_and_direction}= | ${4 + ${ASTF_N_DATA_FRAMES}}
+| ${packets_per_transaction_aggregated}= | ${6 + 2 * ${ASTF_N_DATA_FRAMES}}
 | ${transaction_scale}= | ${n_sessions}
 # Main heap size multiplicator
 | ${heap_size_mult}= | ${2}
 # Ramp-up settings
-| ${ramp_up_rate}= | ${70000}
+| ${ramp_up_rate}= | ${30000}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h-pps
 | ${transaction_type}= | tcp_pps
@@ -135,14 +136,38 @@
 | | And Verify NAT44 TCP sessions number on DUT1 node
 
 *** Test Cases ***
-| 64B-1c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4tcp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
index c72f66e9ad..ba11e1fb43 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -66,7 +66,7 @@
 | ${n_hosts}= | ${1024}
 | ${n_ports}= | ${63}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -108,14 +108,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-ip4base-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
index 549120595f..74049bf8ea 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -66,7 +66,7 @@
 | ${n_hosts}= | ${16384}
 | ${n_ports}= | ${63}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -108,14 +108,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-ip4base-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
index 63e19b3550..516708ee2f 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -66,7 +66,7 @@
 | ${n_hosts}= | ${262144}
 | ${n_ports}= | ${63}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -108,14 +108,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-ip4base-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
index 8bb7dda830..e15527eaa2 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -66,7 +66,7 @@
 | ${n_hosts}= | ${4096}
 | ${n_ports}= | ${63}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -108,14 +108,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-ip4base-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
index e7135a7294..ab38c6c6df 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -66,7 +66,7 @@
 | ${n_hosts}= | ${65536}
 | ${n_ports}= | ${63}
 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Traffic profile:
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -108,14 +108,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-ip4base-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
index 1efffef968..67ed916ec1 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,7 +85,7 @@
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
 | ${transaction_scale}= | ${n_sessions}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -127,14 +127,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-nat44ed-h1024-p63-s64512-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
index 39e5d2456a..5135ac771c 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,9 +85,9 @@
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
 | ${transaction_scale}= | ${n_sessions}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Ramp-up settings
-| ${ramp_up_rate}= | ${36000}
+| ${ramp_up_rate}= | ${30000}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -132,14 +132,38 @@
 | | And Verify NAT44 UDP sessions number on DUT1 node
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-nat44ed-h1024-p63-s64512-tput-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
index 35852dc529..711db0cb24 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,7 +85,7 @@
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
 | ${transaction_scale}= | ${n_sessions}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -127,14 +127,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-nat44ed-h16384-p63-s1032192-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
index 9aa2358a70..021f787408 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -86,9 +86,9 @@
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
 | ${transaction_scale}= | ${n_sessions}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Ramp-up settings
-| ${ramp_up_rate}= | ${36000}
+| ${ramp_up_rate}= | ${30000}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -133,14 +133,38 @@
 | | And Verify NAT44 UDP sessions number on DUT1 node
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-nat44ed-h16384-p63-s1032192-tput-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
index b2f95d7e2a..d94a5b527d 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,7 +85,7 @@
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
 | ${transaction_scale}= | ${n_sessions}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Main heap size multiplicator
 | ${heap_size_mult}= | ${7}
 # Traffic profile
@@ -129,14 +129,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-nat44ed-h262144-p63-s16515072-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
index b1dbdfa0ae..d2b08f7e10 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -86,12 +86,12 @@
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
 | ${transaction_scale}= | ${n_sessions}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Main heap size multiplicator
 | ${heap_size_mult}= | ${7}
 # Ramp-up settings
 # This scale needs more than 55 ktps, which is more than current NDR results.
-| ${ramp_up_rate}= | ${56000}
+| ${ramp_up_rate}= | ${30000}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -136,14 +136,38 @@
 | | And Verify NAT44 UDP sessions number on DUT1 node
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-nat44ed-h262144-p63-s16515072-tput-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
index 7d717937d6..d3aee213e9 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -86,7 +86,7 @@
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
 | ${transaction_scale}= | ${n_sessions}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -128,14 +128,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-nat44ed-h4096-p63-s258048-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
index d76e7e5616..6febe234ae 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -86,9 +86,9 @@
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
 | ${transaction_scale}= | ${n_sessions}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Ramp-up settings
-| ${ramp_up_rate}= | ${36000}
+| ${ramp_up_rate}= | ${30000}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -133,14 +133,38 @@
 | | And Verify NAT44 UDP sessions number on DUT1 node
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-nat44ed-h4096-p63-s258048-tput-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
index 383c9eb488..63da9ecee3 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,7 +85,7 @@
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
 | ${transaction_scale}= | ${n_sessions}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Main heap size multiplicator
 | ${heap_size_mult}= | ${2}
 # Traffic profile
@@ -129,14 +129,38 @@
 | | Then Find NDR and PDR intervals using optimized search
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-nat44ed-h65536-p63-s4128768-pps-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}
diff --git a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
index a743ad1844..0dcff13163 100644
--- a/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
+++ b/tests/vpp/perf/ip4/2n1l-10ge2p1x710-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -85,11 +85,11 @@
 | ${n_ports}= | ${63}
 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
 | ${transaction_scale}= | ${n_sessions}
-| ${packets_per_transaction_and_direction}= | ${33}
+| ${packets_per_transaction_and_direction}= | ${ASTF_N_DATA_FRAMES}
 # Main heap size multiplicator
 | ${heap_size_mult}= | ${2}
 # Ramp-up settings
-| ${ramp_up_rate}= | ${36000}
+| ${ramp_up_rate}= | ${30000}
 # Traffic profile
 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h-pps
 | ${transaction_type}= | udp_pps
@@ -134,14 +134,38 @@
 | | And Verify NAT44 UDP sessions number on DUT1 node
 
 *** Test Cases ***
-| 64B-1c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
+| 100B-1c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 100B | 1C
+| | frame_size=${100} | phy_cores=${1}
 
-| 64B-2c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
+| 100B-2c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 100B | 2C
+| | frame_size=${100} | phy_cores=${2}
 
-| 64B-4c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
+| 100B-4c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 100B | 4C
+| | frame_size=${100} | phy_cores=${4}
+
+| 1518B-1c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 1518B | 1C
+| | frame_size=${1518} | phy_cores=${1}
+
+| 1518B-2c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 1518B | 2C
+| | frame_size=${1518} | phy_cores=${2}
+
+| 1518B-4c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 1518B | 4C
+| | frame_size=${1518} | phy_cores=${4}
+
+| 9000B-1c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 9000B | 1C
+| | frame_size=${9000} | phy_cores=${1}
+
+| 9000B-2c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 9000B | 2C
+| | frame_size=${9000} | phy_cores=${2}
+
+| 9000B-4c-ethip4udp-nat44ed-h65536-p63-s4128768-tput-ndrpdr
+| | [Tags] | 9000B | 4C
+| | frame_size=${9000} | phy_cores=${4}