CSIT-811 HC Test: BGP tests - IPv4 CRUD

Tests configure BGP neighbor peers and simple routes for these peers.

Change-Id: I5102986d710551a451e838d934cc9650bcd38a60
Signed-off-by: selias <samelias@cisco.com>

9 files changed, 855 insertions, 17 deletions

diff --git a/resources/libraries/python/honeycomb/BGP.py b/resources/libraries/python/honeycomb/BGP.py
new file mode 100644
index 0000000000..ca50cc3120
--- /dev/null
+++ b/resources/libraries/python/honeycomb/BGP.py
@@ -0,0 +1,301 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Keywords to manipulate BGP configuration using Honeycomb REST API."""
+
+from resources.libraries.python.HTTPRequest import HTTPCodes
+from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
+from resources.libraries.python.honeycomb.HoneycombUtil \
+    import HoneycombUtil as HcUtil
+
+
+class BGPKeywords(object):
+    """Keywords to manipulate BGP configuration.
+
+    Implements keywords which read configuration and operational data for
+    the BGP feature, and configure BGP parameters using Honeycomb REST API.
+    """
+
+    def __init__(self):
+        pass
+
+    @staticmethod
+    def _configure_bgp_peer(node, path, data=None):
+        """Send BGP peer configuration data and check the response.
+
+        :param node: Honeycomb node.
+        :param path: Additional path to append to the base BGP config path.
+        :param data: Configuration data to be sent in PUT request.
+        :type node: dict
+        :type path: str
+        :type data: dict
+        :returns: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the status code in response on PUT is not
+        200 = OK or 201 = ACCEPTED.
+        """
+
+        if data is None:
+            status_code, resp = HcUtil. \
+                delete_honeycomb_data(node, "config_bgp_peer", path)
+        else:
+            status_code, resp = HcUtil.\
+                put_honeycomb_data(node, "config_bgp_peer", data, path)
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
+            raise HoneycombError(
+                "The configuration of BGP peer was not successful. "
+                "Status code: {0}.".format(status_code))
+        return resp
+
+    @staticmethod
+    def _configure_bgp_route(node, path, data=None):
+        """Send BGP route configuration data and check the response.
+
+        :param node: Honeycomb node.
+        :param path: Additional path to append to the base BGP config path.
+        :param data: Configuration data to be sent in PUT request.
+        :type node: dict
+        :type path: str
+        :type data: dict
+        :returns: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the status code in response on PUT is not
+        200 = OK or 201 = ACCEPTED.
+        """
+
+        if data is None:
+            status_code, resp = HcUtil. \
+                delete_honeycomb_data(node, "config_bgp_route", path)
+        else:
+            status_code, resp = HcUtil. \
+                put_honeycomb_data(node, "config_bgp_route", data, path)
+        if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
+            raise HoneycombError(
+                "The configuration of BGP route was not successful. "
+                "Status code: {0}.".format(status_code))
+        return resp
+
+    @staticmethod
+    def get_full_bgp_configuration(node):
+        """Get BGP configuration from the node.
+
+        :param node: Honeycomb node.
+        :type node: dict
+        :returns: BGP configuration data.
+        :rtype: dict
+        """
+
+        status_code, resp = HcUtil. \
+            get_honeycomb_data(node, "config_bgp_peer")
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get configuration information about BGP."
+                " Status code: {0}.".format(status_code))
+        return resp
+
+    @staticmethod
+    def get_bgp_peer(node, address):
+        """Get BGP configuration of the specified peer from the node.
+
+        :param node: Honeycomb node.
+        :param address: IP address of the peer.
+        :type node: dict
+        :type address: str
+        :returns: BGP peer configuration data.
+        :rtype: dict
+        """
+
+        path = "bgp-openconfig-extensions:neighbors/" \
+               "neighbor/{0}".format(address)
+        status_code, resp = HcUtil. \
+            get_honeycomb_data(node, "config_bgp_peer", path)
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get configuration information about the BGP"
+                " peer. Status code: {0}.".format(status_code))
+        return resp
+
+    @staticmethod
+    def add_bgp_peer(node, address, data):
+        """Configure a BGP peer on the node.
+
+        :param node: Honeycomb node.
+        :param address: IP address of the peer.
+        :param data: Peer configuration data.
+        :type node: dict
+        :type address: str
+        :type data: dict
+        :returns: Content of response.
+        :rtype: bytearray
+        """
+
+        path = "bgp-openconfig-extensions:neighbors/neighbor/{address}".format(
+            address=address)
+        return BGPKeywords._configure_bgp_peer(node, path, data)
+
+    @staticmethod
+    def remove_bgp_peer(node, address):
+        """Remove a BGP peer from the configuration.
+
+        :param node: Honeycomb node.
+        :param address: IP address of the peer.
+        :type node: dict
+        :type address: str
+        :returns: Content of response.
+        :rtype: bytearray
+        """
+
+        path = "bgp-openconfig-extensions:neighbors/neighbor/{address}".format(
+            address=address)
+        return BGPKeywords._configure_bgp_peer(node, path)
+
+    @staticmethod
+    def configure_bgp_route(node, peer_address, data, route_address,
+                            index, ip_version):
+        """Configure a route for the BGP peer specified by peer IP address.
+
+        :param node: Honeycomb node.
+        :param peer_address: IP address of the BGP peer.
+        :param data: Route configuration data.
+        :param route_address: IP address of the route.
+        :param index: Index number of the route within specified peer.
+        :param ip_version: IP protocol version. ipv4 or ipv6
+        :type node: dict
+        :type peer_address: str
+        :type data: dict
+        :type route_address: str
+        :type index: int
+        :type ip_version: str
+        :returns: Content of response.
+        :rtype: bytearray
+        """
+
+        route_address = route_address.replace("/", "%2F")
+
+        if ip_version.lower() == "ipv4":
+            path = "{0}/tables/bgp-types:ipv4-address-family/" \
+                   "bgp-types:unicast-subsequent-address-family/" \
+                   "bgp-inet:ipv4-routes/ipv4-route/{1}/{2}" \
+                .format(peer_address, route_address, index)
+        else:
+            path = "{0}/tables/bgp-types:ipv6-address-family/" \
+                   "bgp-types:unicast-subsequent-address-family/" \
+                   "bgp-inet:ipv6-routes/ipv6-route/{1}/{2}" \
+                .format(peer_address, route_address, index)
+
+        return BGPKeywords._configure_bgp_route(node, path, data)
+
+    @staticmethod
+    def get_bgp_route(node, peer_address, route_address, index, ip_version):
+        """Get all BGP peers from operational data.
+
+        :param node: Honeycomb node.
+        :param peer_address: IP address of the BGP peer.
+        :param route_address: IP address of the route.
+        :param index: Index number of the route within specified peer.
+        :param ip_version: IP protocol version. ipv4 or ipv6
+        :type node: dict
+        :type peer_address: str
+        :type route_address: str
+        :type index: int
+        :type ip_version: str
+        :returns: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the operation fails.
+        """
+
+        route_address = route_address.replace("/", "%2F")
+
+        if ip_version.lower() == "ipv4":
+            path = "{0}/tables/bgp-types:ipv4-address-family/" \
+                   "bgp-types:unicast-subsequent-address-family/" \
+                   "bgp-inet:ipv4-routes/ipv4-route/{1}/{2}" \
+                .format(peer_address, route_address, index)
+        else:
+            path = "{0}/tables/bgp-types:ipv6-address-family/" \
+                   "bgp-types:unicast-subsequent-address-family/" \
+                   "bgp-inet:ipv6-routes/ipv6-route/{1}/{2}" \
+                .format(peer_address, route_address, index)
+        status_code, resp = HcUtil. \
+            get_honeycomb_data(node, "config_bgp_route", path)
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get configuration information about the BGP"
+                " route. Status code: {0}.".format(status_code))
+
+        return resp
+
+    @staticmethod
+    def get_all_peer_routes(node, peer_address, ip_version):
+        """Get all configured routes for the given BGP peer.
+
+        :param node: HOneycomb node.
+        :param peer_address: IP address of the peer.
+        :param ip_version: IP protocol version. ipv4 or ipv6
+        :type node: dict
+        :type peer_address: str
+        :type ip_version: str
+        :returns: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the operation fails.
+        """
+
+        if ip_version.lower() == "ipv4":
+            path = "{0}/tables/bgp-types:ipv4-address-family/" \
+                   "bgp-types:unicast-subsequent-address-family/" \
+                   "bgp-inet:ipv4-routes".format(peer_address)
+        else:
+            path = "{0}/tables/bgp-types:ipv6-address-family/" \
+                   "bgp-types:unicast-subsequent-address-family/" \
+                   "bgp-inet:ipv6-routes".format(peer_address)
+        status_code, resp = HcUtil. \
+            get_honeycomb_data(node, "config_bgp_route", path)
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get configuration information about BGP"
+                " routes. Status code: {0}.".format(status_code))
+
+        return resp
+
+    @staticmethod
+    def remove_bgp_route(node, peer_address, route_address, index, ip_version):
+        """Remove the specified BGP route from configuration.
+
+        :param node: Honeycomb node.
+        :param peer_address: IP address of the BGP peer.
+        :param route_address: IP address of the route.
+        :param index: Index number of the route within specified peer.
+        :param ip_version: IP protocol version. ipv4 or ipv6
+        :type node: dict
+        :type peer_address: str
+        :type route_address: str
+        :type index: int
+        :type ip_version: str
+        :returns: Content of response.
+        :rtype: bytearray
+        """
+
+        route_address = route_address.replace("/", "%2F")
+
+        if ip_version.lower() == "ipv4":
+            path = "{0}/tables/bgp-types:ipv4-address-family/" \
+                   "bgp-types:unicast-subsequent-address-family/" \
+                   "bgp-inet:ipv4-routes/ipv4-route/{1}/{2}" \
+                .format(peer_address, route_address, index)
+        else:
+            path = "{0}/tables/bgp-types:ipv6-address-family/" \
+                   "bgp-types:unicast-subsequent-address-family/" \
+                   "bgp-inet:ipv6-routes/ipv6-route/{1}/{2}" \
+                .format(peer_address, route_address, index)
+
+        return BGPKeywords._configure_bgp_route(node, path)
diff --git a/resources/libraries/python/honeycomb/HoneycombSetup.py b/resources/libraries/python/honeycomb/HoneycombSetup.py
index d10a5ccb4e..fba2bd4225 100644
--- a/resources/libraries/python/honeycomb/HoneycombSetup.py
+++ b/resources/libraries/python/honeycomb/HoneycombSetup.py
@@ -293,7 +293,8 @@ class HoneycombSetup(object):
                 "which java",
                 "java -version",
                 "dpkg --list | grep openjdk",
-                "ls -la /opt/honeycomb")
+                "ls -la /opt/honeycomb",
+                "cat /opt/honeycomb/modules/*module-config")
 
         for node in nodes:
             if node['type'] == NodeType.DUT:
@@ -365,27 +366,32 @@ class HoneycombSetup(object):
          """
 
         disabled_features = {
-            "NSH": "io.fd.hc2vpp.vppnsh.impl.VppNshModule"
+            "NSH": ["io.fd.hc2vpp.vppnsh.impl.VppNshModule"],
+            "BGP": ["io.fd.hc2vpp.bgp.inet.BgpInetModule",
+                    "io.fd.honeycomb.infra.bgp.BgpModule",
+                    "io.fd.honeycomb.infra.bgp.BgpReadersModule",
+                    "io.fd.honeycomb.infra.bgp.BgpWritersModule"]
         }
 
         ssh = SSH()
         ssh.connect(node)
 
         if feature in disabled_features.keys():
-            # uncomment by replacing the entire line
-            find = replace = "{0}".format(disabled_features[feature])
-            if disable:
-                replace = "// {0}".format(find)
-
-            argument = '"/{0}/c\\ {1}"'.format(find, replace)
-            path = "{0}/modules/*module-config"\
-                .format(Const.REMOTE_HC_DIR)
-            command = "sed -i {0} {1}".format(argument, path)
-
-            (ret_code, _, stderr) = ssh.exec_command_sudo(command)
-            if ret_code != 0:
-                raise HoneycombError("Failed to modify configuration on "
-                                     "node {0}, {1}".format(node, stderr))
+            # for every module, uncomment by replacing the entire line
+            for item in disabled_features[feature]:
+                find = replace = "{0}".format(item)
+                if disable:
+                    replace = "// {0}".format(find)
+
+                argument = '"/{0}/c\\ {1}"'.format(find, replace)
+                path = "{0}/modules/*module-config"\
+                    .format(Const.REMOTE_HC_DIR)
+                command = "sed -i {0} {1}".format(argument, path)
+
+                (ret_code, _, stderr) = ssh.exec_command_sudo(command)
+                if ret_code != 0:
+                    raise HoneycombError("Failed to modify configuration on "
+                                         "node {0}, {1}".format(node, stderr))
         else:
             raise HoneycombError(
                 "Unrecognized feature {0}.".format(feature))
diff --git a/resources/libraries/python/honeycomb/Routing.py b/resources/libraries/python/honeycomb/Routing.py
index 495e96e0fd..4c6a3f205b 100644
--- a/resources/libraries/python/honeycomb/Routing.py
+++ b/resources/libraries/python/honeycomb/Routing.py
@@ -157,7 +157,7 @@ class RoutingKeywords(object):
         if status_code != HTTPCodes.OK:
             raise HoneycombError(
                 "Not possible to get operational information about the "
-                "classify tables. Status code: {0}.".format(status_code))
+                "routing tables. Status code: {0}.".format(status_code))
 
         data = RoutingKeywords.clean_routing_oper_data(
             resp['routing-protocol'][0]['static-routes']
diff --git a/resources/libraries/robot/honeycomb/bgp.robot b/resources/libraries/robot/honeycomb/bgp.robot
new file mode 100644
index 0000000000..d4c2d6b0a2
--- /dev/null
+++ b/resources/libraries/robot/honeycomb/bgp.robot
@@ -0,0 +1,173 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.honeycomb.BGP.BGPKeywords
+| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
+
+*** Keywords ***
+| No BGP peers should be configured
+| | [Documentation] | Uses Honeycomb API to read BGP configuration and checks
+| | ... | if there ary BGP peers conffigured.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| No BGP peers should be configured \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${node}
+| | ...
+| | ${oper_data}= | Get Full BGP Configuration | ${node}
+| | Should be Empty | ${oper_data['bgp-openconfig-extensions:bgp']['neighbors']}
+
+| Honeycomb adds BGP peer
+| | [Documentation] | Uses Honeycomb API to add a BGP peer.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - address - IP address of the peer. Type: string
+| | ... | - data - Peer configuration data. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb adds BGP peer \| ${nodes['DUT1']} \| 192.168.0.1 \
+| | ... | \| ${data} \|
+| | ...
+| | [Arguments] | ${node} | ${address} | ${data}
+| | ...
+| | Add BGP Peer | ${node} | ${address} | ${data}
+
+| BGP Peer From Honeycomb Should be
+| | [Documentation] | Uses Honeycomb API to verify BGP peer operational data.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - address - IP address of the peer. Type: string
+| | ... | - data - Peer configuration data. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| BGP Peer From Honeycomb Should be \
+| | ... | \| ${nodes['DUT1']} \| 192.168.0.1 \| ${data} \|
+| | ...
+| | [Arguments] | ${node} | ${address} | ${data}
+| | ...
+| | ${oper_data}= | Get BGP Peer | ${node} | ${address}
+| | Compare Data Structures | ${oper_data} | ${data}
+
+| Honeycomb removes BGP peer
+| | [Documentation] | Uses Honeycomb API to add a BGP peer.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - address - IP address of the peer. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb adds BGP peer \| ${nodes['DUT1']} \| 192.168.0.1 \|
+| | ...
+| | [Arguments] | ${node} | ${address}
+| | ...
+| | Remove BGP Peer | ${node} | ${address}
+
+| Honeycomb configures BGP route
+| | [Documentation] | Uses Honeycomb API to add a BGP route\
+| | ... | to the specified peer.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - peer_address - IP address of the peer. Type: string
+| | ... | - data - Peer configuration data. Type: dictionary
+| | ... | - route_address - IP address of the route. Type: string
+| | ... | - route_index - Numeric index of the route under the peer.\
+| | ... | Type: integer
+| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb adds BGP peer \| ${nodes['DUT1']} \| 192.168.0.1 \
+| | ... | \| ${data} \| 192.168.0.2 \| ${0} \| ipv4 \|
+| | ...
+| | [Arguments] | ${node} | ${peer_address} | ${data}
+| | ... | ${route_address} | ${route_index} | ${ip_version}
+| | ...
+| | Configure BGP Route | ${node} | ${peer_address} | ${data}
+| | ... | ${route_address} | ${route_index} | ${ip_version}
+
+| BGP Route From Honeycomb Should be
+| | [Documentation] | Uses Honeycomb API to verify BGP route operational data.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - peer_address - IP address of the peer. Type: string
+| | ... | - data - Peer configuration data. Type: dictionary
+| | ... | - route_address - IP address of the route. Type: string
+| | ... | - route_index - Numeric index of the route under the peer.\
+| | ... | Type: integer
+| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| BGP Peers From Honeycomb Should Include \
+| | ... | \| ${nodes['DUT1']} \| ${data} \|
+| | ...
+| | [Arguments] | ${node} | ${peer_address} | ${data}
+| | ... | ${route_address} | ${route_index} | ${ip_version}
+| | ...
+| | ${oper_data}= | Get BGP Route | ${node} | ${peer_address}
+| | ... | ${route_address} | ${route_index} | ${ip_version}
+| | Compare Data Structures | ${oper_data} | ${data}
+
+| Honeycomb removes BGP route
+| | [Documentation] | Uses Honeycomb API to remove a BGP route.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - peer_address - IP address of the peer. Type: string
+| | ... | - route_address - IP address of the route. Type: string
+| | ... | - route_index - Numeric index of the route under the peer.\
+| | ... | Type: integer
+| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb removes BGP route \| ${nodes['DUT1']} \| 192.168.0.1 \
+| | ... | \| 192.168.0.2 \| ${0} \| ipv4 \|
+| | ...
+| | [Arguments] | ${node} | ${peer_address} | ${route_address}
+| | ... | ${route_index} | ${ip_version}
+| | ...
+| | Remove BGP Route | ${node} | ${peer_address} | ${route_address}
+| | ... | ${route_index} | ${ip_version}
+
+| No BGP routes should be configured
+| | [Documentation] | Uses Honeycomb API to verify that no BGP routes\
+| | ... | are configured under the specified peer.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - peer_address - IP address of the peer. Type: string
+| | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| No BGP routes should be configured \| ${nodes['DUT1']} \
+| | ... | \| 192.168.0.1 \| ipv4 \|
+| | ...
+| | [Arguments] | ${node} | ${peer_address} | ${ip_version}
+| | ...
+| | ${oper_data}= | Get All Peer Routes
+| | ... | ${node} | ${peer_address} | ${ip_version}
+| | Should be Empty | ${oper_data['bgp-inet:${ip_version}-routes']}
diff --git a/resources/templates/honeycomb/config_bgp_peer.url b/resources/templates/honeycomb/config_bgp_peer.url
new file mode 100644
index 0000000000..b5f0666f07
--- /dev/null
+++ b/resources/templates/honeycomb/config_bgp_peer.url
@@ -0,0 +1 @@
+/restconf/config{odl_url_part}/openconfig-network-instance:network-instances/network-instance/global-bgp/openconfig-network-instance:protocols/protocol/openconfig-policy-types:BGP/hc-bgp-instance/bgp/
\ No newline at end of file
diff --git a/resources/templates/honeycomb/config_bgp_route.url b/resources/templates/honeycomb/config_bgp_route.url
new file mode 100644
index 0000000000..71d7f0a250
--- /dev/null
+++ b/resources/templates/honeycomb/config_bgp_route.url
@@ -0,0 +1 @@
+/restconf/config{odl_url_part}/bgp-rib:application-rib/
\ No newline at end of file
diff --git a/resources/templates/honeycomb/oper_bgp.url b/resources/templates/honeycomb/oper_bgp.url
new file mode 100644
index 0000000000..c2f90863c4
--- /dev/null
+++ b/resources/templates/honeycomb/oper_bgp.url
@@ -0,0 +1 @@
+/restconf/operational{odl_url_part}/bgp-rib:bgp-rib/rib/hc-bgp-instance/
\ No newline at end of file
diff --git a/resources/test_data/honeycomb/bgp.py b/resources/test_data/honeycomb/bgp.py
new file mode 100644
index 0000000000..f9dc4ab233
--- /dev/null
+++ b/resources/test_data/honeycomb/bgp.py
@@ -0,0 +1,192 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from copy import deepcopy
+
+"""Test variables for BGP test suite."""
+
+# Internal BGP peers for CRUD tests
+address_internal = "192.168.0.2"
+address_internal2 = "192.168.0.3"
+peer_internal = {
+    "bgp-openconfig-extensions:neighbor": [{
+        "neighbor-address": address_internal,
+        "config": {
+            "peer-type": "INTERNAL"
+        },
+        "timers": {
+            "config": {
+                "connect-retry": 10,
+                "hold-time": 60
+            }
+        },
+        "transport": {
+            "config": {
+                "remote-port": 17900,
+                "passive-mode": False
+            }
+        },
+        "afi-safis": {
+            "afi-safi": [{
+                "afi-safi-name": "openconfig-bgp-types:IPV4-UNICAST",
+                "receive": True,
+                "send-max": 0
+                }]
+            }
+        }]
+    }
+
+peer_internal_update = {
+    "bgp-openconfig-extensions:neighbor": [{
+        "neighbor-address": address_internal,
+        "config": {
+            "peer-type": "INTERNAL"
+        },
+        "timers": {
+            "config": {
+                "connect-retry": 5,
+                "hold-time": 120
+            }
+        },
+        "transport": {
+            "config": {
+                "remote-port": 17901,
+                "passive-mode": True
+            }
+        },
+        "afi-safis": {
+            "afi-safi": [{
+                "afi-safi-name": "openconfig-bgp-types:IPV6-UNICAST",
+                "receive": False,
+                "send-max": 1
+                }]
+            }
+        }]
+    }
+
+peer_internal2 = deepcopy(peer_internal)
+peer_internal2["bgp-openconfig-extensions:neighbor"][0]["neighbor-address"] = \
+    address_internal2
+
+# Application BGP peer for CRUD tests
+address_application = "192.168.0.4"
+peer_application = {
+    "bgp-openconfig-extensions:neighbor": [{
+        "neighbor-address": address_application,
+        "config": {
+            "peer-group": "application-peers"
+        },
+        "afi-safis": {
+            "afi-safi": [
+                {
+                    "afi-safi-name": "openconfig-bgp-types:IPV4-UNICAST",
+                    "receive": True,
+                    "send-max": 0
+                },
+                {
+                    "afi-safi-name":
+                        "openconfig-bgp-types:IPV4-LABELLED-UNICAST",
+                    "receive": True,
+                    "send-max": 0
+                }]
+            }
+        }]
+    }
+
+route_address_ipv4 = "192.168.0.5/32"
+route_id_ipv4 = 0
+route_data_ipv4 = {
+    "bgp-inet:ipv4-route": [{
+        "path-id": route_id_ipv4,
+        "prefix": route_address_ipv4,
+        "attributes": {
+            "as-path": {},
+            "origin": {
+                "value": "igp"
+            },
+            "local-pref": {
+                "pref": 100
+            },
+            "ipv4-next-hop": {
+                "global": "192.168.1.1"
+            }
+        }
+    }]
+}
+
+route_data_ipv4_update = {
+    "bgp-inet:ipv4-route": [{
+        "path-id": route_id_ipv4,
+        "prefix": route_address_ipv4,
+        "attributes": {
+            "as-path": {},
+            "origin": {
+                "value": "egp"
+            },
+            "local-pref": {
+                "pref": 200
+            },
+            "ipv4-next-hop": {
+                "global": "192.168.1.2"
+            }
+        }
+    }]
+}
+
+route_address_ipv4_2 = "192.168.0.6/32"
+route_id_ipv4_2 = 1
+route_data_ipv4_2 = {
+    "bgp-inet:ipv4-route": [{
+        "path-id": route_id_ipv4_2,
+        "prefix": route_address_ipv4_2,
+        "attributes": {
+            "as-path": {},
+            "origin": {
+                "value": "igp"
+            },
+            "local-pref": {
+                "pref": 100
+            },
+            "ipv4-next-hop": {
+                "global": "192.168.1.2"
+            }
+        }
+    }]
+}
+
+route_address_ipv6 = "3ffe:62::1/64"
+route_id_ipv6 = 0
+route_data_ipv6 = {
+    "bgp-inet:ipv6-route": [{
+        "path-id": route_id_ipv6,
+        "prefix": route_address_ipv6,
+        "attributes": {
+            "as-path": {},
+            "origin": {
+                "value": "igp"
+            },
+            "local-pref": {
+                "pref": 100
+            },
+            "ipv6-next-hop": {
+                "global": "3ffe:63::1"
+            }
+        }
+    }]
+}
+
+table1_oper = {
+    "destination-prefix": route_address_ipv4,
+    "next-hop": "192.168.1.1",
+    "vpp-ipv4-route-state": {}
+}
\ No newline at end of file
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot
new file mode 100644
index 0000000000..da662dbc69
--- /dev/null
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot
@@ -0,0 +1,163 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Interface to run tests on.
+| ${interface}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/bgp.robot
+| Resource | resources/libraries/robot/honeycomb/routing.robot
+| Variables | resources/test_data/honeycomb/bgp.py
+| ...
+| Suite Setup | Run Keywords
+| ... | Enable Honeycomb Feature | ${node} | BGP | AND
+| ... | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Run Keywords
+| ... | Tear Down Honeycomb Functional Test Suite | ${node} | AND
+| ... | Disable Honeycomb Feature | ${node} | BGP
+| ...
+| Force Tags | HC_FUNC
+| ...
+| Documentation | *Honeycomb BGP management test suite.*
+
+*** Test Cases ***
+| TC01: Honeycomb configures BGP peer - Internal
+| | [Documentation] | Check if Honeycomb can configure an internal BGP peer.
+| | ...
+| | When Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | Then BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+
+| TC03: Honeycomb removes peer configuration
+| | [Documentation] | Check if Honeycomb can remove a configured BGP peer.
+| | ...
+| | Given BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | When Honeycomb removes BGP peer | ${node} | ${address_internal}
+| | Then No BGP peers should be configured | ${node}
+
+| TC02: Honeycomb updates existing BGP peer - Internal
+| | [Documentation] | Check if Honeycomb can update an existing BGP peer.
+| | ...
+| | [Teardown] | Honeycomb removes BGP peer | ${node} | ${address_internal}
+| | ...
+| | Given No BGP peers should be configured | ${node}
+| | When Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | And Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal} | ${peer_internal_update}
+| | Then BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal_update}
+
+| TC04: Honeycomb configures BGP peer - Application
+| | [Documentation] | Check if Honeycomb can configure an application BGP peer.
+| | ...
+| | [Teardown] | Honeycomb removes BGP peer | ${node} | ${address_application}
+| | ...
+| | Given No BGP peers should be configured | ${node}
+| | When Honeycomb adds BGP peer
+| | ... | ${node} | ${address_application} | ${peer_application}
+| | Then BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_application} | ${peer_application}
+
+| TC05: Honeycomb configures a second BGP peer
+| | [Documentation] | Check if Honeycomb can configure more than one BGP peer.
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal} | AND
+| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal2}
+| | ...
+| | Given No BGP peers should be configured | ${node}
+| | When Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | And Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal2} | ${peer_internal2}
+| | Then BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | And BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal2} | ${peer_internal2}
+
+| TC06: Honeycomb configures IPv4 route using BGP
+| | [Documentation] | Check if Honeycomb can configure a BGP route under a peer.
+| | ...
+| | Given Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | When Honeycomb configures BGP route
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | Then BGP Route from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+
+| TC08: Honeycomb removes IPv4 route configuration
+| | [Documentation] | Check if Honeycomb can remove a configured BGP route.
+| | ...
+| | Given BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | And BGP Route from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | When Honeycomb removes BGP route | ${node} | ${address_internal}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | Then No BGP Routes Should be Configured
+| | ... | ${node} | ${address_internal} | ipv4
+
+| TC07: Honeycomb updates existing IPv4 route using BGP
+| | [Documentation] | Check if Honeycomb can update an existing BGP route.
+| | ...
+| | [Teardown] | Honeycomb removes BGP route | ${node} | ${address_internal}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | ...
+| | Given BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | And No BGP Routes Should be Configured
+| | ... | ${node} | ${address_internal} | ipv4
+| | When Honeycomb configures BGP route
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | And Honeycomb configures BGP route
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4_update}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | Then BGP Route from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4_update}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+
+| TC09: Honeycomb configures a second IPv4 route
+| | [Documentation] | Check if Honeycomb can configure more than one BGP route.
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb removes BGP route | ${node} | ${address_internal}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 | AND
+| | ... | Honeycomb removes BGP route | ${node} | ${address_internal}
+| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4
+| | ...
+| | Given BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | When Honeycomb configures BGP route
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | And Honeycomb configures BGP route
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4_2}
+| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4
+| | Then BGP Route from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | And BGP Route from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4_2}
+| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4