Raw results chk keywords and initial TC

- Implementation of Display raw results
- Implementation of Traffic should pass with maximum rate
- Code optimizations
- L2BD, L2XC, IP4, IP6 TC

Change-Id: I0b50e995a853ed3c8f88323ccc650e47b8ed2496
Signed-off-by: Peter Mikus <pmikus@cisco.com>

9 files changed, 831 insertions, 77 deletions

diff --git a/bootstrap-verify-perf.sh b/bootstrap-verify-perf.sh
index c051b58bb7..8dedb530ab 100755
--- a/bootstrap-verify-perf.sh
+++ b/bootstrap-verify-perf.sh
@@ -165,19 +165,19 @@ case "$TEST_TAG" in
               tests/
         RETURN_STATUS=$(echo $?)
         ;;
-    VERIFY-PERF-NDRCHK )
+    VERIFY-PERF-MRR )
         pybot ${PYBOT_ARGS} \
               -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \
               -s "tests.vpp.perf" \
-              --include ndrchkAND1t1cORndrchkAND2t2c \
+              --include mrrAND1t1cORmrrAND2t2c \
               tests/
         RETURN_STATUS=$(echo $?)
         ;;
-    PERFTEST_NDRCHK_DAILY )
+    PERFTEST_MRR_DAILY )
         pybot ${PYBOT_ARGS} \
               -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \
               -s "tests.vpp.perf" \
-              --include ndrchkAND1t1cORndrchkAND2t2c \
+              --include mrrAND1t1cORmrrAND2t2c \
               tests/
         RETURN_STATUS=$(echo $?)
         ;;
@@ -241,15 +241,15 @@ case "$TEST_TAG" in
         pybot ${PYBOT_ARGS} \
               -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \
               -s "tests.vpp.perf.crypto" \
-              --include pdrdiscANDnic_intel-xl710AND1t1cANDipsechw \
-              --include pdrdiscANDnic_intel-xl710AND2t2cANDipsechw \
+              --include ndrdiscANDnic_intel-xl710AND1t1cANDipsechw \
+              --include ndrdiscANDnic_intel-xl710AND2t2cANDipsechw \
               tests/
         ;;
     VPP-VERIFY-PERF-IP4 )
         pybot ${PYBOT_ARGS} \
               -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \
               -s "tests.vpp.perf" \
-              --include pdrchkANDnic_intel-x520-da2AND1t1cANDip4baseORpdrchkANDnic_intel-x520-da2AND1t1cANDip4fwdANDfib_2m \
+              --include mrrANDnic_intel-x520-da2AND1t1cANDip4baseORmrrANDnic_intel-x520-da2AND1t1cANDip4fwdANDfib_2m \
               tests/
         RETURN_STATUS=$(echo $?)
         ;;
@@ -257,7 +257,7 @@ case "$TEST_TAG" in
         pybot ${PYBOT_ARGS} \
               -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \
               -s "tests.vpp.perf" \
-              --include pdrchkANDnic_intel-x520-da2AND1t1cANDip6baseORpdrchkANDnic_intel-x520-da2AND1t1cANDip6fwdANDfib_2m \
+              --include mrrANDnic_intel-x520-da2AND1t1cANDip6baseORmrrANDnic_intel-x520-da2AND1t1cANDip6fwdANDfib_2m \
               tests/
         RETURN_STATUS=$(echo $?)
         ;;
@@ -265,7 +265,7 @@ case "$TEST_TAG" in
         pybot ${PYBOT_ARGS} \
               -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \
               -s "tests.vpp.perf" \
-              --include pdrchkANDnic_intel-x520-da2AND1t1cANDl2xcbaseORpdrchkANDnic_intel-x520-da2AND1t1cANDl2bdbase \
+              --include mrrANDnic_intel-x520-da2AND1t1cANDl2xcbaseORmrrANDnic_intel-x520-da2AND1t1cANDl2bdbase \
               tests/
         RETURN_STATUS=$(echo $?)
         ;;
@@ -333,15 +333,7 @@ case "$TEST_TAG" in
         pybot ${PYBOT_ARGS} \
               -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \
               -s "tests.vpp.perf" \
-              -i NDRCHK \
-              tests/
-        RETURN_STATUS=$(echo $?)
-        ;;
-    PERFTEST_NIGHTLY )
-        #run all available tests
-        pybot ${PYBOT_ARGS} \
-              -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \
-              -s "tests.vpp.perf" \
+              -i MRR \
               tests/
         RETURN_STATUS=$(echo $?)
         ;;
@@ -365,14 +357,6 @@ if [ ! $? -eq 0 ]; then
     echo "Parsing ${SCRIPT_DIR}/output.xml failed"
 fi
 
-python ${SCRIPT_DIR}/resources/tools/report_gen/run_robot_json_data.py \
-       --input ${SCRIPT_DIR}/output.xml \
-       --output ${SCRIPT_DIR}/output_perf_data.json \
-       --vdevice ${VPP_STABLE_VER}
-if [ ! $? -eq 0 ]; then
-    echo "Generating JSON data for report from ${SCRIPT_DIR}/output.xml failed"
-fi
-
 # Archive artifacts
 mkdir -p archive
 for i in ${ARCHIVE_ARTIFACTS[@]}; do
diff --git a/docs/tag_documentation.rst b/docs/tag_documentation.rst
index e54fdc8e92..e33bd6fa6b 100644
--- a/docs/tag_documentation.rst
+++ b/docs/tag_documentation.rst
@@ -152,6 +152,16 @@ Performance testing tags
     Performance tests where TG verifies DUTs' throughput at ref-NDR (reference
     Non Drop Rate) with zero packet loss tolerance.
 
+.. topic:: PDRCHK
+
+    Performance tests where TG verifies DUTs' throughput at ref-PDR (reference
+    Partial Drop Rate) with 0.5% loss tolerance.
+
+.. topic:: MRR
+
+    Performance tests where TG sends the traffic at maximum rate (line rate)
+    and reports total sent/received packets over performance trial duration.
+
 .. topic:: NDRPDRDISC
 
     Find performance of DUT based on :rfc:`2544` with linear / binary / combined
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot
index 52be3a26a8..542583d1bd 100644
--- a/resources/libraries/robot/performance/performance_configuration.robot
+++ b/resources/libraries/robot/performance/performance_configuration.robot
@@ -117,16 +117,20 @@
 | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
 | | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
 | | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac}
-| | dut1_v4.set_arp | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac}
-| | dut2_v4.set_arp | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac}
-| | dut2_v4.set_arp | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac}
-| | dut1_v4.set_ip | ${dut1_if1} | 10.10.10.1 | 24
-| | dut1_v4.set_ip | ${dut1_if2} | 1.1.1.1 | 30
-| | dut2_v4.set_ip | ${dut2_if1} | 1.1.1.2 | 30
-| | dut2_v4.set_ip | ${dut2_if2} | 20.20.20.1 | 24
-| | dut1_v4.set_route | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2}
-| | dut2_v4.set_route | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1}
+| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac}
+| | Add arp on dut | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac}
+| | Add arp on dut | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac}
+| | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac}
+| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1}
+| | ... | 10.10.10.1 | 24
+| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2}
+| | ... | 1.1.1.1 | 30
+| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if1}
+| | ... | 1.1.1.2 | 30
+| | Configure IP addresses on interfaces | ${dut2} | ${dut2_if2}
+| | ... | 20.20.20.1 | 24
+| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2}
+| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1}
 | | All Vpp Interfaces Ready Wait | ${nodes}
 
 | Initialize IPv4 forwarding in 2-node circular topology
@@ -141,10 +145,12 @@
 | | Set Interface State | ${dut1} | ${dut1_if2} | up
 | | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
 | | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | dut1_v4.set_arp | ${dut1_if1} | 10.10.10.3 | ${tg1_if1_mac}
-| | dut1_v4.set_arp | ${dut1_if2} | 20.20.20.3 | ${tg1_if2_mac}
-| | dut1_v4.set_ip | ${dut1_if1} | 10.10.10.2 | 24
-| | dut1_v4.set_ip | ${dut1_if2} | 20.20.20.2 | 24
+| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.3 | ${tg1_if1_mac}
+| | Add arp on dut | ${dut1} | ${dut1_if2} | 20.20.20.3 | ${tg1_if2_mac}
+| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1}
+| | ... | 10.10.10.2 | 24
+| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2}
+| | ... | 20.20.20.2 | 24
 | | All Vpp Interfaces Ready Wait | ${nodes}
 
 | Initialize IPv4 forwarding with scaling in 3-node circular topology
@@ -238,29 +244,29 @@
 | | Set Interface State | ${dut2} | ${dut2_vif1} | up
 | | Set Interface State | ${dut2} | ${dut2_vif2} | up
 | | Add Fib Table | ${dut1} | ${fib_table_1}
-| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1}
-| | ... | gateway=4.4.4.2 | interface=${dut1_vif1} | multipath=${TRUE}
+| | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1}
+| | ... | gateway=4.4.4.2 | interface=${dut1_vif1} | multipath=${TRUE}
 | | Add Fib Table | ${dut1} | ${fib_table_1}
 | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1}
-| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE}
+| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE}
 | | Add Fib Table | ${dut1} | ${fib_table_2}
 | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2}
-| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE}
+| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE}
 | | Add Fib Table | ${dut1} | ${fib_table_2}
 | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2}
-| | ... | gateway=5.5.5.2 | interface=${dut1_vif2} | multipath=${TRUE}
+| | ... | gateway=5.5.5.2 | interface=${dut1_vif2} | multipath=${TRUE}
 | | Add Fib Table | ${dut2} | ${fib_table_1}
 | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1}
-| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE}
+| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE}
 | | Add Fib Table | ${dut2} | ${fib_table_1}
 | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1}
-| | ... | gateway=4.4.4.1 | interface=${dut2_vif1} | multipath=${TRUE}
+| | ... | gateway=4.4.4.1 | interface=${dut2_vif1} | multipath=${TRUE}
 | | Add Fib Table | ${dut2} | ${fib_table_2}
 | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2}
-| | ... | gateway=5.5.5.2 | interface=${dut2_vif2} | multipath=${TRUE}
+| | ... | gateway=5.5.5.2 | interface=${dut2_vif2} | multipath=${TRUE}
 | | Add Fib Table | ${dut2} | ${fib_table_2}
 | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2}
-| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE}
+| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE}
 | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1}
 | | Assign Interface To Fib Table | ${dut1} | ${dut1_vif1} | ${fib_table_1}
 | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2}
@@ -354,16 +360,16 @@
 | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nr}
 | | Add Fib Table | ${dut1} | ${fib_table_1}
 | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_1}
-| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE}
+| | ... | gateway=1.1.1.2 | interface=${dut1_if1} | multipath=${TRUE}
 | | Add Fib Table | ${dut1} | ${fib_table_2}
 | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_2}
-| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE}
+| | ... | gateway=2.2.2.2 | interface=${dut1_if2} | multipath=${TRUE}
 | | Add Fib Table | ${dut2} | ${fib_table_1}
 | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_1}
-| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE}
+| | ... | gateway=2.2.2.1 | interface=${dut2_if1} | multipath=${TRUE}
 | | Add Fib Table | ${dut2} | ${fib_table_2}
 | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_2}
-| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE}
+| | ... | gateway=3.3.3.2 | interface=${dut2_if2} | multipath=${TRUE}
 | | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1}
 | | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2}
 | | Assign Interface To Fib Table | ${dut2} | ${dut2_if1} | ${fib_table_1}
@@ -412,19 +418,19 @@
 | | | Set Interface State | ${dut2} | ${dut2-vhost-${number}-if2} | up
 | | | Add Fib Table | ${dut1} | ${fib_table_1}
 | | | And Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | vrf=${fib_table_1}
-| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1-vhost-${number}-if1}
+| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut1-vhost-${number}-if1}
 | | | ... | multipath=${TRUE}
 | | | Add Fib Table | ${dut1} | ${fib_table_2}
 | | | And Vpp Route Add | ${dut1} | 10.10.10.0 | 24 | vrf=${fib_table_2}
-| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1-vhost-${number}-if2}
+| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut1-vhost-${number}-if2}
 | | | ... | multipath=${TRUE}
 | | | Add Fib Table | ${dut2} | ${fib_table_1}
 | | | And Vpp Route Add | ${dut2} | 20.20.20.0 | 24 | vrf=${fib_table_1}
-| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut2-vhost-${number}-if1}
+| | | ... | gateway=${ip_net_vif1}.1 | interface=${dut2-vhost-${number}-if1}
 | | | ... | multipath=${TRUE}
 | | | Add Fib Table | ${dut2} | ${fib_table_2}
 | | | And Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | vrf=${fib_table_2}
-| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut2-vhost-${number}-if2}
+| | | ... | gateway=${ip_net_vif2}.2 | interface=${dut2-vhost-${number}-if2}
 | | | ... | multipath=${TRUE}
 | | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1}
 | | | ... | ${fib_table_1}
@@ -2166,3 +2172,4 @@
 | | | ... | ${dut2-memif-${number}-if1} | ${number}
 | | | Add interface to bridge domain | ${dut2}
 | | | ... | ${dut2-memif-${number}-if2} | ${bd_id2}
+
diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot
index 0cc6388391..51e117ba9e 100644
--- a/resources/libraries/robot/performance/performance_setup.robot
+++ b/resources/libraries/robot/performance/performance_setup.robot
@@ -550,6 +550,13 @@
 | | Show VAT History On All DUTs | ${nodes}
 | | Show statistics on all DUTs | ${nodes}
 
+| Tear down performance mrr test
+| | [Documentation] | Common test teardown for max-received-rate performance
+| | ... | tests.
+| | ...
+| | Remove All Added Ports On All DUTs From Topology | ${nodes}
+| | Show VAT History On All DUTs | ${nodes}
+
 | Tear down performance test with wrk
 | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
 | | ... | tests.
diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot
index 88826a7c9b..fa3174983e 100644
--- a/resources/libraries/robot/performance/performance_utils.robot
+++ b/resources/libraries/robot/performance/performance_utils.robot
@@ -370,7 +370,7 @@
 | | ... | Througput is calculated as:
 | | ... | Measured rate per stream * Total number of streams
 | | ... | Bandwidth is calculated as:
-| | ... | (Througput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
+| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
 | | ...
 | | ... | *Arguments:*
 | | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string
@@ -403,7 +403,7 @@
 | | ... | Througput is calculated as:
 | | ... | Measured rate per stream * Total number of streams
 | | ... | Bandwidth is calculated as:
-| | ... | (Througput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
+| | ... | (Throughput * (L2 Frame Size + IPG) * 8) / Max bitrate of NIC
 | | ...
 | | ... | *Arguments:*
 | | ... | - rate_per_stream - Measured rate per stream [pps]. Type: string
@@ -435,6 +435,30 @@
 | | ... | ${\n}LOSS_ACCEPTANCE: ${loss_acceptance} ${loss_acceptance_type}
 | | ... | append=yes
 
+| Display raw results
+| | [Documentation]
+| | ... | Display raw results from TG in total received/send packets over trial
+| | ... | duration in seconds.
+| | ...
+| | ... | *Arguments:*
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - results - Measured results. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Display raw results \| 64 \| results \|
+| | ...
+| | [Arguments] | ${framesize} | ${results}
+| | ...
+| | ${framesize}= | Get Frame Size | ${framesize}
+| | @{tokens}= | Split String | ${results} | ,
+| | @{received}= | Split String | @{tokens}[1] | =
+| | @{sent}= | Split String | @{tokens}[2] | =
+| | ${total_received} = | Set Variable | @{received}[1]
+| | ${total_sent} = | Set Variable | @{sent}[1]
+| | Set Test Message | MaxReceivedRate_Results [pkts/${perf_trial_duration}sec]:
+| | Set Test Message | tx ${total_sent}, rx ${total_received} | append=yes
+
 | Measure latency pps
 | | [Documentation]
 | | ... | Send traffic at specified rate. Measure min/avg/max latency
@@ -442,7 +466,7 @@
 | | ... | *Arguments:*
 | | ... | - duration - Duration of traffic run [s]. Type: integer
 | | ... | - rate - Rate for sending packets. Type: integer
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
 | | ... | - topology_type - Topology type. Type: string
 | | ...
 | | ... | *Example:*
@@ -467,7 +491,7 @@
 | | ... | *Arguments:*
 | | ... | - duration - Duration of traffic run [s]. Type: integer
 | | ... | - rate - Rate for sending packets. Type: string
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
 | | ... | - topology_type - Topology type. Type: string
 | | ... | - fail_on_loss - If True, the keyword fails if loss occurred.
 | | ... | Type: boolean
@@ -480,17 +504,8 @@
 | | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
 | | ... | ${fail_on_loss}=${True}
 | | ...
-| | Clear and show runtime counters with running traffic | ${duration}
-| | ... | ${rate} | ${framesize} | ${topology_type}
-| | ${ret}= | Is DPDK performance test
-| | Run Keyword If | ${ret}==${False} | Clear all counters on all DUTs
-| | Run Keyword If | ${ret}==${False} and ${pkt_trace}==${True}
-| | ... | VPP Enable Traces On All DUTs | ${nodes}
-| | Send traffic on tg | ${duration} | ${rate} | ${framesize}
-| | ... | ${topology_type} | warmup_time=0
-| | Run Keyword If | ${ret}==${False} | Show statistics on all DUTs | ${nodes}
-| | Run Keyword If | ${ret}==${False} and ${pkt_trace}==${True}
-| | ... | Show Packet Trace On All Duts | ${nodes}
+| | Send traffic at specified rate | ${duration} | ${rate} | ${framesize}
+| | ... | ${topology_type}
 | | Run Keyword If | ${fail_on_loss} | No traffic loss occurred
 
 | Traffic should pass with partial loss
@@ -501,7 +516,7 @@
 | | ... | *Arguments:*
 | | ... | - duration - Duration of traffic run [s]. Type: integer
 | | ... | - rate - Rate for sending packets. Type: string
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
 | | ... | - topology_type - Topology type. Type: string
 | | ... | - loss_acceptance - Accepted loss during search. Type: float
 | | ... | - loss_acceptance_type - Percentage or frames. Type: string
@@ -515,19 +530,63 @@
 | | ... | ${loss_acceptance} | ${loss_acceptance_type}
 | | ... | ${fail_on_loss}=${True}
 | | ...
+| | Send traffic at specified rate | ${duration} | ${rate} | ${framesize}
+| | ... | ${topology_type}
+| | Run Keyword If | ${fail_on_loss} | Partial traffic loss accepted
+| | ... | ${loss_acceptance} | ${loss_acceptance_type}
+
+| Traffic should pass with maximum rate
+| | [Documentation]
+| | ... | Send traffic at maximum rate.
+| | ...
+| | ... | *Arguments:*
+| | ... | - duration - Duration of traffic run [s]. Type: integer
+| | ... | - rate - Rate for sending packets. Type: string
+| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
+| | ... | - topology_type - Topology type. Type: string
+| | ... | Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Traffic should pass with no loss \| 10 \| 4.0mpps \| 64 \
+| | ... | \| 3-node-IPv4 \|
+| | ...
+| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
+| | ...
+| | ${results}= | Send traffic at specified rate | ${duration} | ${rate}
+| | ... | ${framesize} | ${topology_type}
+| | Display raw results | ${framesize} | ${results}
+
+| Send traffic at specified rate
+| | [Documentation]
+| | ... | Send traffic at specified rate.
+| | ...
+| | ... | *Arguments:*
+| | ... | - duration - Duration of traffic run [s]. Type: integer
+| | ... | - rate - Rate for sending packets. Type: string
+| | ... | - framesize - L2 Frame Size [B]. Type: integer/string
+| | ... | - topology_type - Topology type. Type: string
+| | ... | Type: boolean
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Send traffic at specific rate \| 10 \| 4.0mpps \| 64 \
+| | ... | \| 3-node-IPv4 \|
+| | ...
+| | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
+| | ...
 | | Clear and show runtime counters with running traffic | ${duration}
 | | ... | ${rate} | ${framesize} | ${topology_type}
 | | ${ret}= | Is DPDK performance test
 | | Run Keyword If | ${ret}==${False} | Clear all counters on all DUTs
 | | Run Keyword If | ${ret}==${False} and ${pkt_trace}==${True}
 | | ... | VPP Enable Traces On All DUTs | ${nodes}
-| | Send traffic on tg | ${duration} | ${rate} | ${framesize}
+| | ${results} = | Send traffic on tg | ${duration} | ${rate} | ${framesize}
 | | ... | ${topology_type} | warmup_time=0
 | | Run Keyword If | ${ret}==${False} | Show statistics on all DUTs | ${nodes}
 | | Run Keyword If | ${ret}==${False} and ${pkt_trace}==${True}
 | | ... | Show Packet Trace On All Duts | ${nodes}
-| | Run Keyword If | ${fail_on_loss} | Partial traffic loss accepted
-| | ... | ${loss_acceptance} | ${loss_acceptance_type}
+| | Return From Keyword | ${results}
 
 | Clear and show runtime counters with running traffic
 | | [Documentation]
@@ -538,7 +597,7 @@
 | | ... | *Arguments:*
 | | ... | - duration - Duration of traffic run [s]. Type: integer
 | | ... | - rate - Rate for sending packets. Type: string
-| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - framesize - L2 Frame Size [B] or IMIX_v4_1. Type: integer/string
 | | ... | - topology_type - Topology type. Type: string
 | | ...
 | | ... | *Example:*
diff --git a/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot
new file mode 100644
index 0000000000..59216416eb
--- /dev/null
+++ b/tests/vpp/perf/ip4/10ge2p1x520-ethip4-ip4base-mrr.robot
@@ -0,0 +1,172 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE | IP4BASE
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv4 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
+| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
+
+*** Keywords ***
+| Check RR for ethip4-ip4base
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Initialize IPv4 forwarding in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | framesize=${64} | wt=1 | rxq=1
+
+| tc02-1518B-1t1c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | framesize=${1518} | wt=1 | rxq=1
+
+| tc03-9000B-1t1c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | framesize=${9000} | wt=1 | rxq=1
+
+| tc04-64B-2t2c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | framesize=${64} | wt=2 | rxq=1
+
+| tc05-1518B-2t2c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | framesize=${1518} | wt=2 | rxq=1
+
+| tc06-9000B-2t2c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | framesize=${9000} | wt=2 | rxq=1
+
+| tc07-64B-4t4c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | framesize=${64} | wt=4 | rxq=2
+
+| tc08-1518B-4t4c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | framesize=${1518} | wt=4 | rxq=2
+
+| tc09-9000B-4t4c-ethip4-ip4base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip4-ip4base
+| | framesize=${9000} | wt=4 | rxq=2
diff --git a/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot
new file mode 100644
index 0000000000..22c14ad4db
--- /dev/null
+++ b/tests/vpp/perf/ip6/10ge2p1x520-ethip6-ip6base-mrr.robot
@@ -0,0 +1,172 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE | IP6BASE
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results IPv6 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv6 header and
+| ... | static payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip6-ip6src253
+
+*** Keywords ***
+| Check RR for ethip6-ip6base
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Initialize IPv6 forwarding in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-78B-1t1c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${78} | wt=1 | rxq=1
+
+| tc02-1518B-1t1c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${1518} | wt=1 | rxq=1
+
+| tc03-9000B-1t1c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${9000} | wt=1 | rxq=1
+
+| tc04-78B-2t2c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${78} | wt=2 | rxq=1
+
+| tc05-1518B-2t2c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${1518} | wt=2 | rxq=1
+
+| tc06-9000B-2t2c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${9000} | wt=2 | rxq=1
+
+| tc07-78B-4t4c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${78} | wt=4 | rxq=2
+
+| tc08-1518B-4t4c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${1518} | wt=4 | rxq=2
+
+| tc09-9000B-4t4c-ethip6-ip6base-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for ethip6-ip6base
+| | framesize=${9000} | wt=4 | rxq=2
diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot
new file mode 100644
index 0000000000..e834475dc9
--- /dev/null
+++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-mrr.robot
@@ -0,0 +1,172 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | L2BDBASE
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X520-DA2
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results L2BD test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
+| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC
+| ... | X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+
+*** Keywords ***
+| Check RR for l2bdbasemaclrn
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Initialize L2 bridge domain in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-eth-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for l2bdbasemaclrn
+| | framesize=${64} | wt=1 | rxq=1
+
+| tc02-1518B-1t1c-eth-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for l2bdbasemaclrn
+| | framesize=${1518} | wt=1 | rxq=1
+
+| tc03-9000B-1t1c-eth-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for l2bdbasemaclrn
+| | framesize=${9000} | wt=1 | rxq=1
+
+| tc04-64B-2t2c-eth-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2bdbasemaclrn
+| | framesize=${64} | wt=2 | rxq=1
+
+| tc05-1518B-2t2c-eth-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2bdbasemaclrn
+| | framesize=${1518} | wt=2 | rxq=1
+
+| tc06-9000B-2t2c-eth-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2bdbasemaclrn
+| | framesize=${9000} | wt=2 | rxq=1
+
+| tc07-64B-4t4c-eth-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2bdbasemaclrn
+| | framesize=${64} | wt=4 | rxq=2
+
+| tc08-1518B-4t4c-eth-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2bdbasemaclrn
+| | framesize=${1518} | wt=4 | rxq=2
+
+| tc09-9000B-4t4c-eth-l2bdbasemaclrn-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2bdbasemaclrn
+| | framesize=${9000} | wt=4 | rxq=2
diff --git a/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot
new file mode 100644
index 0000000000..02c65ebb8b
--- /dev/null
+++ b/tests/vpp/perf/l2/10ge2p1x520-eth-l2xcbase-mrr.robot
@@ -0,0 +1,171 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
+| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | L2XCBASE
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X520-DA2
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance mrr test
+| ...
+| Documentation | *Raw results L2XC test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
+| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic
+| ... | at line rate and reports total received/sent packets over trial period.
+| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
+| ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
+| ... | flow-group) with all packets containing Ethernet header, IPv4 header
+| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
+| ... | addresses of the TG node interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+# X520-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+
+*** Keywords ***
+| Check RR for l2xcbase
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC config with ${wt} thread(s), ${wt}\
+| | ... | phy core(s), ${rxq} receive queue(s) per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ...
+| | # Test Variables required for test teardown
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ...
+| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Run Keyword If | ${get_framesize} < ${1522}
+| | ... | Add no multi seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And Initialize L2 xconnect in 3-node circular topology
+| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-eth-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for l2xcbase
+| | framesize=${64} | wt=1 | rxq=1
+
+| tc02-1518B-1t1c-eth-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for l2xcbase
+| | framesize=${1518} | wt=1 | rxq=1
+
+| tc03-9000B-1t1c-eth-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 1T1C | STHREAD
+| | ...
+| | [Template] | Check RR for l2xcbase
+| | framesize=${9000} | wt=1 | rxq=1
+
+| tc04-64B-2t2c-eth-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2xcbase
+| | framesize=${64} | wt=2 | rxq=1
+
+| tc05-1518B-2t2c-eth-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2xcbase
+| | framesize=${1518} | wt=2 | rxq=1
+
+| tc06-9000B-2t2c-eth-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC config with 2 threads, 2 phy cores,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 2T2C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2xcbase
+| | framesize=${9000} | wt=2 | rxq=1
+
+| tc07-64B-4t4c-eth-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
+| | ... | throughput test.
+| | [Tags] | 64B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2xcbase
+| | framesize=${64} | wt=4 | rxq=2
+
+| tc08-1518B-4t4c-eth-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 1518B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2xcbase
+| | framesize=${1518} | wt=4 | rxq=2
+
+| tc09-9000B-4t4c-eth-l2xcbase-mrr
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC config with 4 threads, 4 phy cores,\
+| | ... | 2 receive queues per NIC port.
+| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single\
+| | ... | trial throughput test.
+| | [Tags] | 9000B | 4T4C | MTHREAD
+| | ...
+| | [Template] | Check RR for l2xcbase
+| | framesize=${9000} | wt=4 | rxq=2