aboutsummaryrefslogtreecommitdiffstats
path: root/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py
diff options
context:
space:
mode:
authorVratko Polak <vrpolak@cisco.com>2022-04-25 10:22:05 +0200
committerVratko Polak <vrpolak@cisco.com>2022-05-03 15:23:47 +0000
commit1daa6fdc0bae284dee1b61f34534e59b60b7526a (patch)
tree6314e011a8f029c4332586d5fd05b51d1a69a89c /GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py
parentcd417be7f836eb9346fad4f87bd4f75dc1d9a429 (diff)
feat(astf): Support framesizes for ASTF
- No support for IMIX. + Fix a bad bug in padding (most ASTF profiles had wrong frame sizes). + Fix a big typo in TCP PPS profiles (s->c was not data, just RST). + Control transaction size via ASTF_N_DATA_FRAMES env variable. - Default value 5 leads to transactions smaller than before. + It ensures transaction is one burst (per direction) even for jumbo. + Edit autogen to set supported frame sizes based on suite id. + Both TCP and UDP use the same values: + 64B for CPS (exact for UDP, nominal for TCP). + 100B, 1518B and 9000B for TPUT and PPS. - TCP TPUT achievable minimum is 70B. + Used 100B to leave room for possible IPv6 ASTF tests. + Separate function for code reused by vpp and trex tests. - I do not really like the new "copy and edit" approach added here. + But it is a quick edit, better autogen refactor is low priority. + Consider both established and transitory sessions as valid. - Mostly for compatibility with 2202 behavior and to avoid ramp-ups. - Assuming both session states have similar enough VPP CPU overhead. + Added a TODO to investigate and maybe reconsider later. + Update the state timeout value to 240s. + That is the default for TCP (for transitory state). - UDP could keep using 300s. + But I prefer UDP and TCP to behave as similarly as possible. + Use TRex tunables to get the exact frame size (for data packets). - It is not clear why the recipe for MSS has to be this complicated. + Move code away from profile init, as frame size is not known there. + Change internal profile API, so values related to MSS are passed. + Lower ramp-up rate for TCP TPUT tests. + Because without lower rate, jumbo fails on packet loss in ramp-up. + UDP TPUT ramp-up rate also lowered (just to keep suites more similar). + Distinguish one-direction and aggregated average frame size. + Update keyword documentation where the distiction matters. + One-direction is needed for turning bandwidth limit to TPS limit. + Aggregated is needed for correct NDRPDR bandwidth result value. - TCP TPUT will always be few percent below bidirectional maximum. + That is unavoidable, as one direction sends more control packets. + Add runtime consistency checks so future refactors are safer. + Fail if padding requested would be negative. + Fail if suite claims unexpected values for packets per transaction. + Edit the 4 types of ASTF profiles to keep them similar to each other. + Move UDP TPUT limit value from a field back to direct argument. + Stop pretending first UDP packet is not data. + Apply small improvements where convenient. + Replace "aggregate" with "aggregated" where possible. + To lower probability of any future typos in variable names. + Avoid calling Set Numeric Frame Sizes twice. + Code formatting, keyword documentation, code comments, ... + Add TODOs for less important code quality improvements. - Postpone updating of methodology pages to a subsequent change. Change-Id: I4b381e5210e69669f972326202fdcc5a2c9c923b Signed-off-by: Vratko Polak <vrpolak@cisco.com>
Diffstat (limited to 'GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py')
-rw-r--r--GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py58
1 files changed, 27 insertions, 31 deletions
diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py
index 78ee8f31fc..a1282adf2f 100644
--- a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-1024h.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
+# Copyright (c) 2022 Cisco and/or its affiliates.
#
# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
#
@@ -49,26 +49,6 @@ from profile_trex_astf_base_class import TrafficProfileBaseClass
class TrafficProfile(TrafficProfileBaseClass):
"""Traffic profile."""
- def __init__(self):
- """Initialization and setting of profile parameters."""
-
- super(TrafficProfileBaseClass, self).__init__()
-
- # IPs used in packet headers.
- self.p1_src_start_ip = u"192.168.0.0"
- self.p1_src_end_ip = u"192.168.3.255"
- self.p1_dst_start_ip = u"20.0.0.0"
- self.p1_dst_end_ip = u"20.0.3.255"
-
- # UDP messages
- self.udp_req = u"GET"
- self.udp_res = u"ACK"
-
- # Headers length
- self.headers_size = 42 # 14B l2 + 20B ipv4 + 8B udp
-
- # No need to set keepalive, both programs end just after start&send.
-
def define_profile(self):
"""Define profile to be used by advanced stateful traffic generator.
@@ -78,13 +58,29 @@ class TrafficProfile(TrafficProfileBaseClass):
:returns: IP generator and profile templates ASTFProfile().
:rtype: tuple
"""
- self.udp_req += self._gen_padding(self.headers_size + len(self.udp_req))
- self.udp_res += self._gen_padding(self.headers_size + len(self.udp_res))
+ # IPs used in packet headers.
+ p1_src_start_ip = u"192.168.0.0"
+ p1_src_end_ip = u"192.168.3.255"
+ p1_dst_start_ip = u"20.0.0.0"
+ p1_dst_end_ip = u"20.0.3.255"
+
+ # Headers length
+ headers_size = 46 # 18B L2 + 20B IPv4 + 8B UDP.
+
+ # UDP messages, not padded yet.
+ udp_req = u"GET"
+ udp_res = u"ACK"
+
+ # Padd to the required frame size.
+ udp_req += self._gen_padding(headers_size + len(udp_req))
+ udp_res += self._gen_padding(headers_size + len(udp_res))
+
+ # No need to set keepalive, both programs end just after start&send.
# client commands
prog_c = ASTFProgram(stream=False)
# send REQ message
- prog_c.send_msg(self.udp_req)
+ prog_c.send_msg(udp_req)
# No need to process the response, seeing L2 counter is enough.
# Client program can end here.
@@ -93,22 +89,22 @@ class TrafficProfile(TrafficProfileBaseClass):
# When server instance is created means REQ is visible in L2 counter.
# No need to receive explicitly?
# send RES message
- prog_s.send_msg(self.udp_res)
+ prog_s.send_msg(udp_res)
# Server program can end here.
# ip generators
ip_gen_c = ASTFIPGenDist(
- ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
- distribution=u"seq"
+ ip_range=[p1_src_start_ip, p1_src_end_ip],
+ distribution=u"seq",
)
ip_gen_s = ASTFIPGenDist(
- ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
- distribution=u"seq"
+ ip_range=[p1_dst_start_ip, p1_dst_end_ip],
+ distribution=u"seq",
)
ip_gen = ASTFIPGen(
glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
dist_client=ip_gen_c,
- dist_server=ip_gen_s
+ dist_server=ip_gen_s,
)
# server association
@@ -119,7 +115,7 @@ class TrafficProfile(TrafficProfileBaseClass):
program=prog_c,
ip_gen=ip_gen,
limit=64512, # TODO: set via input parameter ?
- port=8080
+ port=8080,
)
temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
template = ASTFTemplate(client_template=temp_c, server_template=temp_s)