Perf: NAT44 endpoint-dependent mode - udp, part I

- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was
reached limit of changes (1000)

Jira: CSIT-1711

- udp synthetic profiles w/o data packets
- udp cps perf tests, phase I (no special "search cps" KW)

Part I means that we are using MRR tests to collect traffic data
until there is ready new CPS test type with corresponding algorithm.

Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 130 insertions, 0 deletions

diff --git a/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py
new file mode 100644
index 0000000000..bf1ac295e7
--- /dev/null
+++ b/GPL/traffic_profiles/trex/trex-astf-ethip4udp-16384h.py
@@ -0,0 +1,130 @@
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Traffic profile for T-rex advanced stateful (astf) traffic generator.
+
+Traffic profile:
+ - Two streams sent in directions 0 --> 1 (client -> server, requests) and
+   1 --> 0 (server -> client, responses) at the same time.
+ - Packet: ETH / IP / UDP
+ - Direction 0 --> 1:
+   - Source IP address range:      192.168.0.0 - 192.168.63.255
+   - Destination IP address range: 20.0.0.0 - 20.0.63.255
+ - Direction 1 --> 0:
+   - Source IP address range:      destination IP address from packet received
+     on port 1
+   - Destination IP address range: source IP address from packet received
+     on port 1
+"""
+
+from trex.astf.api import *
+
+from profile_trex_astf_base_class import TrafficProfileBaseClass
+
+
+class TrafficProfile(TrafficProfileBaseClass):
+    """Traffic profile."""
+
+    def __init__(self):
+        """Initialization and setting of profile parameters."""
+
+        super(TrafficProfileBaseClass, self).__init__()
+
+        # IPs used in packet headers.
+        self.p1_src_start_ip = u"192.168.0.0"
+        self.p1_src_end_ip = u"192.168.63.255"
+        self.p1_dst_start_ip = u"20.0.0.0"
+        self.p1_dst_end_ip = u"20.0.63.255"
+
+        # UDP messages
+        self.udp_req = u"GET"
+        self.udp_res = u"ACK"
+
+        # Headers length
+        self.headers_size = 42  # 14B l2 + 20B ipv4 + 8B udp
+
+        # Required UDP keepalive value for T-Rex
+        self.udp_keepalive = 2000  # 2s (2,000 msec)
+
+    def define_profile(self):
+        """Define profile to be used by advanced stateful traffic generator.
+
+        This method MUST return:
+            return ip_gen, templates, None
+
+        :returns: IP generator and profile templates ASTFProfile().
+        :rtype: tuple
+        """
+        self.udp_req += self._gen_padding(self.headers_size + len(self.udp_req))
+        self.udp_res += self._gen_padding(self.headers_size + len(self.udp_res))
+
+        # client commands
+        prog_c = ASTFProgram(stream=False)
+        # set the keepalive timer for UDP flows to not close udp session
+        # immediately after packet exchange
+        prog_c.set_keepalive_msg(self.udp_keepalive)
+        # send REQ message
+        prog_c.send_msg(self.udp_req)
+        # receive RES message
+        prog_c.recv_msg(1)
+
+        # server commands
+        prog_s = ASTFProgram(stream=False)
+        # set the keepalive timer for UDP flows to not close udp session
+        # immediately after packet exchange
+        prog_c.set_keepalive_msg(self.udp_keepalive)
+        # receive REQ message
+        prog_s.recv_msg(1)
+        # send RES message
+        prog_s.send_msg(self.udp_res)
+
+        # ip generators
+        ip_gen_c = ASTFIPGenDist(
+            ip_range=[self.p1_src_start_ip, self.p1_src_end_ip],
+            distribution=u"seq"
+        )
+        ip_gen_s = ASTFIPGenDist(
+            ip_range=[self.p1_dst_start_ip, self.p1_dst_end_ip],
+            distribution=u"seq"
+        )
+        ip_gen = ASTFIPGen(
+            glob=ASTFIPGenGlobal(ip_offset=u"0.0.0.1"),
+            dist_client=ip_gen_c,
+            dist_server=ip_gen_s
+        )
+
+        # server association
+        s_assoc = ASTFAssociation(rules=ASTFAssociationRule(port=8080))
+
+        # template
+        temp_c = ASTFTCPClientTemplate(
+            program=prog_c,
+            ip_gen=ip_gen,
+            limit=1032192,  # TODO: set via input parameter ?
+            port=8080
+        )
+        temp_s = ASTFTCPServerTemplate(program=prog_s, assoc=s_assoc)
+        template = ASTFTemplate(client_template=temp_c, server_template=temp_s)
+
+        return ip_gen, template, None
+
+
+def register():
+    """Register this traffic profile to T-Rex.
+
+    Do not change this function.
+
+    :return: Traffic Profiles.
+    :rtype: Object
+    """
+    return TrafficProfile()