Separate files needing GPL license

+ Keep apache license for now, until this is completed:
  https://wiki.fd.io/view/TSC/Relicensing_Procedure
+ Add utilities for switching license comment blocks.
 - They do not preserve attributes, so executable flag is lost.
+ Move the affected files to GPL/.
 + Update paths so files are executed from the new location.
 + Change the way scripts are started to do not require executable flag.
 + Employ OptionString when constructing longer command lines.
+ Move also PacketVerifier.py and TrafficScriptArg.py
  as they are linked with traffic scripts.
 + That means the two files are outside "resources" package tree now.
 + Added __init__.py files so relative imports work in new package tree.
+ Start traffic scripts as python modules to allow relative imports.
 + Once again needed because they are outside the default PYTHONPATH.

Change-Id: Ieb135629e890adbaf5b79497570f3be25b746f9f
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 215 insertions, 0 deletions

diff --git a/GPL/traffic_profiles/trex/trex-sl-2n-ethip4-macsrc500kdst500k.py b/GPL/traffic_profiles/trex/trex-sl-2n-ethip4-macsrc500kdst500k.py
new file mode 100644
index 0000000000..9c55482078
--- /dev/null
+++ b/GPL/traffic_profiles/trex/trex-sl-2n-ethip4-macsrc500kdst500k.py
@@ -0,0 +1,215 @@
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Stream profile for T-rex traffic generator.
+
+Stream profile:
+ - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
+ - Packet: ETH / IP /
+ - Direction 0 --> 1:
+   - Source MAC address range:      ca:fe:00:00:00:00 - ca:fe:00:07:a1:1f
+   - Destination MAC address range: fa:ce:00:00:00:00 - fa:ce:00:07:a1:1f
+   - Source IP address range:       10.0.0.0 - 10.7.161.31
+   - Destination IP address range:  20.0.0.0 - 20.7.161.31
+ - Direction 1 --> 0:
+   - Source MAC address range:      fa:ce:00:00:00:00 - fa:ce:00:07:a1:1f
+   - Destination MAC address range: ca:fe:00:00:00:00 - ca:fe:00:07:a1:1f
+   - Source IP address range:       20.0.0.0 - 20.7.161.31
+   - Destination IP address range:  10.0.0.0 - 10.7.161.31
+"""
+
+from trex.stl.api import *
+from profile_trex_stateless_base_class import TrafficStreamsBaseClass
+
+
+class TrafficStreams(TrafficStreamsBaseClass):
+    """Stream profile."""
+
+    def __init__(self):
+        """Initialization and setting of streams' parameters."""
+
+        super(TrafficStreamsBaseClass, self).__init__()
+
+        self.clients = 500000
+
+        # MACs used in packet headers.
+        self.p1_src_start_mac = u"ca:fe:00:00:00:00" # mask: 00:00:FF:FF:FF:FF
+        self.p1_dst_start_mac = u"fa:ce:00:00:00:00" # mask: 00:00:FF:FF:FF:FF
+
+        self.p2_src_start_mac = u"fa:ce:00:00:00:00" # mask: 00:00:FF:FF:FF:FF
+        self.p2_dst_start_mac = u"ca:fe:00:00:00:00" # mask: 00:00:FF:FF:FF:FF
+
+        # IPs used in packet headers.
+        self.p1_src_start_ip = u"10.0.0.0"
+        self.p1_src_end_ip = u"10.7.161.31"
+
+        self.p1_dst_start_ip = u"20.0.0.0"
+        self.p1_dst_end_ip = u"20.7.161.31"
+
+        self.p2_src_start_ip = u"20.0.0.0"
+        self.p2_src_end_ip = u"20.7.161.31"
+
+        self.p2_dst_start_ip = u"10.0.0.0"
+        self.p2_dst_end_ip = u"10.7.161.31"
+
+    def define_packets(self):
+        """Defines the packets to be sent from the traffic generator.
+
+        Packet definition: | ETH | IP |
+
+        :returns: Packets to be sent from the traffic generator.
+        :rtype: tuple
+        """
+
+        # Direction 0 --> 1
+        base_pkt_a = (
+            Ether(
+                src=self.p1_src_start_mac,
+                dst=self.p1_dst_start_mac
+            ) /
+            IP(
+                src=self.p1_src_start_ip,
+                dst=self.p1_dst_start_ip,
+                proto=61
+            )
+        )
+        # Direction 1 --> 0
+        base_pkt_b = (
+          Ether(
+              src=self.p2_src_start_mac,
+              dst=self.p2_dst_start_mac
+          ) /
+          IP(
+              src=self.p2_src_start_ip,
+              dst=self.p2_dst_start_ip,
+              proto=61
+          )
+        )
+
+        # Direction 0 --> 1
+        vm1 = STLScVmRaw(
+            [
+                STLVmFlowVar(
+                    name=u"mac_src",
+                    min_value=0,
+                    max_value=self.clients-1,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmFlowVar(
+                    name=u"mac_dst",
+                    min_value=0,
+                    max_value=self.clients-1,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"mac_src",
+                    pkt_offset= 8
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"mac_dst",
+                    pkt_offset= 2
+                ),
+                STLVmFlowVar(
+                    name=u"ip_src",
+                    min_value=self.p1_src_start_ip,
+                    max_value=self.p1_src_end_ip,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"ip_src",
+                    pkt_offset=u"IP.src"
+                ),
+                STLVmFlowVar(
+                    name=u"ip_dst",
+                    min_value=self.p1_dst_start_ip,
+                    max_value=self.p1_dst_end_ip,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmWrFlowVar(
+                      fv_name=u"ip_dst",
+                      pkt_offset=u"IP.dst"
+                ),
+                STLVmFixIpv4(
+                      offset=u"IP"
+                )
+            ]
+        )
+        # Direction 1 --> 0
+        vm2 = STLScVmRaw(
+            [
+                STLVmFlowVar(
+                    name=u"mac_src",
+                    min_value=0,
+                    max_value=self.clients-1,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmFlowVar(
+                    name=u"mac_dst",
+                    min_value=0,
+                    max_value=self.clients-1,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"mac_src",
+                    pkt_offset= 8
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"mac_dst",
+                    pkt_offset= 2
+                ),
+                STLVmFlowVar(
+                    name=u"ip_src",
+                    min_value=self.p2_src_start_ip,
+                    max_value=self.p2_src_end_ip,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"ip_src",
+                    pkt_offset=u"IP.src"
+                ),
+                STLVmFlowVar(
+                    name=u"ip_dst",
+                    min_value=self.p2_dst_start_ip,
+                    max_value=self.p2_dst_end_ip,
+                    size=4,
+                    op=u"inc"
+                ),
+                STLVmWrFlowVar(
+                    fv_name=u"ip_dst",
+                    pkt_offset=u"IP.dst"
+                ),
+                STLVmFixIpv4(
+                    offset=u"IP"
+                )
+            ]
+        )
+
+        return base_pkt_a, base_pkt_b, vm1, vm2
+
+
+def register():
+    """Register this traffic profile to T-rex.
+
+    Do not change this function.
+
+    :return: Traffic streams.
+    :rtype: Object
+    """
+    return TrafficStreams()