feat(trex): cleanup t-rex profiles

Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ib93dc1552945fe91ab5346b9b759d56c7468debf

1 files changed, 0 insertions, 143 deletions

diff --git a/GPL/traffic_profiles/trex/trex-stl-2n-dot1qip4asym-ip4src254.py b/GPL/traffic_profiles/trex/trex-stl-2n-dot1qip4asym-ip4src254.py
deleted file mode 100644
index 91df41eba7..0000000000
--- a/GPL/traffic_profiles/trex/trex-stl-2n-dot1qip4asym-ip4src254.py
+++ /dev/null
@@ -1,143 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-#
-# SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
-#
-# Licensed under the Apache License 2.0 or
-# GNU General Public License v2.0 or later;  you may not use this file
-# except in compliance with one of these Licenses. You
-# may obtain a copy of the Licenses at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#     https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html
-#
-# Note: If this file is linked with Scapy, which is GPLv2+, your use of it
-# must be under GPLv2+.  If at any point in the future it is no longer linked
-# with Scapy (or other GPLv2+ licensed software), you are free to choose
-# Apache 2.
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Stream profile for T-rex traffic generator.
-
-Stream profile:
- - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
- - Direction 0 --> 1:
-   - Packet:                       ETH / IP /
-   - Source IP address range:      10.10.10.1 - 10.10.10.254
-   - Destination IP address range: 20.20.20.1
- - Direction 1 --> 0:
-   - Packet:                       ETH / DOT1Q / IP /
-   - Source IP address range:      20.20.20.1 - 20.20.20.254
-   - Destination IP address range: 10.10.10.1
-"""
-
-from trex.stl.api import *
-from profile_trex_stateless_base_class import TrafficStreamsBaseClass
-
-
-class TrafficStreams(TrafficStreamsBaseClass):
-    """Stream profile."""
-
-    def __init__(self):
-        """Initialization and setting of streams' parameters."""
-
-        super(TrafficStreamsBaseClass, self).__init__()
-
-        # VLAN ID
-        self.vlan_id = 10
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"10.10.10.1"
-        self.p1_src_end_ip = u"10.10.10.254"
-        self.p1_dst_start_ip = u"20.20.20.1"
-
-        self.p2_src_start_ip = u"20.20.20.1"
-        self.p2_src_end_ip = u"20.20.20.254"
-        self.p2_dst_start_ip = u"10.10.10.1"
-
-    def define_packets(self):
-        """Defines the packets to be sent from the traffic generator.
-
-        Packet definition: | ETH | IP |
-
-        :returns: Packets to be sent from the traffic generator.
-        :rtype: tuple
-        """
-
-        # Direction 0 --> 1
-        base_pkt_a = (
-            Ether() /
-            IP(
-                src=self.p1_src_start_ip,
-                dst=self.p1_dst_start_ip,
-                proto=61
-            )
-        )
-        # Direction 1 --> 0
-        base_pkt_b = (
-            Ether() /
-            Dot1Q(
-                vlan=self.vlan_id
-            ) /
-            IP(
-                src=self.p2_src_start_ip,
-                dst=self.p2_dst_start_ip,
-                proto=61
-            )
-        )
-
-        # Direction 0 --> 1
-        vm1 = STLScVmRaw(
-            [
-                STLVmFlowVar(
-                    name=u"src",
-                    min_value=self.p1_src_start_ip,
-                    max_value=self.p1_src_end_ip,
-                    size=4,
-                    op=u"inc"
-                ),
-                STLVmWrFlowVar(
-                    fv_name=u"src",
-                    pkt_offset=u"IP.src"
-                ),
-                STLVmFixIpv4(
-                    offset=u"IP"
-                )
-            ]
-        )
-        # Direction 1 --> 0
-        vm2 = STLScVmRaw(
-            [
-                STLVmFlowVar(
-                    name=u"src",
-                    min_value=self.p2_src_start_ip,
-                    max_value=self.p2_src_end_ip,
-                    size=4,
-                    op=u"inc"
-                ),
-                STLVmWrFlowVar(
-                    fv_name=u"src",
-                    pkt_offset=u"IP.src"
-                ),
-                STLVmFixIpv4(
-                    offset=u"IP"
-                )
-            ]
-        )
-
-        return base_pkt_a, base_pkt_b, vm1, vm2
-
-
-def register():
-    """Register this traffic profile to T-rex.
-
-    Do not change this function.
-
-    :return: Traffic streams.
-    :rtype: Object
-    """
-    return TrafficStreams()