test: nat44det - add session number check

- some tests need to reduce rate for ramp-up phase
- some tests need to extend trail duration in ramp-up phase
- removed 2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63 suite
  as nat out ports are randomly selected from available port range
  so T-Rex stateless is not able to provide required out2in traffic

Change-Id: I1145496610d202f81d911e68aa819844d7600918
Signed-off-by: Jan Gelety <jgelety@cisco.com>

2 files changed, 0 insertions, 338 deletions

diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip4udp-1u63p.py b/GPL/traffic_profiles/trex/trex-stl-ethip4udp-1u63p.py
deleted file mode 100644
index ed28e915ca..0000000000
--- a/GPL/traffic_profiles/trex/trex-stl-ethip4udp-1u63p.py
+++ /dev/null
@@ -1,169 +0,0 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Stream profile for T-rex traffic generator.
-
-Stream profile:
- - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
- - Packet: ETH / IP / UDP
- - Direction 0 --> 1:
-   - Source IP address range:      192.168.0.0
-   - Destination IP address range: 20.0.0.0
-   - Source UDP port range:        1024 - 1086
-   - Destination UDP port range:   1024
- - Direction 1 --> 0:
-   - Source IP address range:      20.0.0.0
-   - Destination IP address range: 68.142.68.0
-   - Source UDP port range:        1024
-   - Destination UDP port range:   1024 - 16017
-"""
-
-from trex.stl.api import *
-from profile_trex_stateless_base_class import TrafficStreamsBaseClass
-
-
-class TrafficStreams(TrafficStreamsBaseClass):
-    """Stream profile."""
-
-    def __init__(self):
-        """Initialization and setting of streams' parameters."""
-
-        super(TrafficStreamsBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.0.0"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.0.0"
-
-        self.p2_src_start_ip = u"20.0.0.0"
-        self.p2_src_end_ip = u"20.0.0.0"
-        self.p2_dst_start_ip = u"68.142.68.0"
-        self.p2_dst_end_ip = u"68.142.68.0"
-
-        # UDP ports used in packet headers.
-        self.p1_src_start_udp_port = 1024
-        self.p1_src_end_udp_port = 1086
-        self.p1_dst_start_udp_port = 1024
-        self.p1_dst_end_udp_port = 1024
-
-        self.p2_src_start_udp_port = 1024
-        self.p2_src_end_udp_port = 1024
-        self.p2_dst_start_udp_port = 1024
-        self.p2_dst_end_udp_port = 16017
-
-    def define_packets(self):
-        """Defines the packets to be sent from the traffic generator.
-
-        Packet definition: | ETH | IP | UDP |
-
-        :returns: Packets to be sent from the traffic generator.
-        :rtype: tuple
-        """
-
-        # Direction 0 --> 1
-        base_pkt_a = (
-            Ether() /
-            IP(
-                src=self.p1_src_start_ip,
-                dst=self.p1_dst_start_ip,
-                proto=17
-            ) /
-            UDP(
-                sport=self.p1_src_start_udp_port,
-                dport=self.p1_dst_start_udp_port
-            )
-        )
-        # Direction 1 --> 0
-        base_pkt_b = (
-            Ether() /
-            IP(
-                src=self.p2_src_start_ip,
-                dst=self.p2_dst_start_ip,
-                proto=17
-            ) /
-            UDP(
-                sport=self.p2_src_start_udp_port,
-                dport=self.p2_dst_start_udp_port
-            )
-        )
-
-        # Direction 0 --> 1
-        vm1 = STLVM()
-        vm1.var(name="sIP",
-                min_value=self.p1_src_start_ip,
-                max_value=self.p1_src_end_ip,
-                size=4,
-                op="inc",
-                next_var="sport")
-        vm1.var(name="sport",
-                min_value=self.p1_src_start_udp_port,
-                max_value=self.p1_src_end_udp_port,
-                size=2,
-                op="inc")
-        vm1.var(name="dIP",
-                min_value=self.p1_dst_start_ip,
-                max_value=self.p1_dst_end_ip,
-                size=4,
-                op="inc")
-        vm1.var(name="dport",
-                min_value=self.p1_dst_start_udp_port,
-                max_value=self.p1_dst_end_udp_port,
-                size=2,
-                op="inc")
-        vm1.write(fv_name="sIP", pkt_offset="IP.src")
-        vm1.write(fv_name="sport", pkt_offset="UDP.sport")
-        vm1.write(fv_name="dIP", pkt_offset="IP.dst")
-        vm1.write(fv_name="dport", pkt_offset="UDP.dport")
-        vm1.fix_chksum(offset='IP')
-        # Direction 0 --> 1
-        vm2 = STLVM()
-        vm2.var(name="sIP",
-                min_value=self.p2_src_start_ip,
-                max_value=self.p2_src_end_ip,
-                size=4,
-                op="inc",
-                next_var="sport")
-        vm2.var(name="sport",
-                min_value=self.p2_src_start_udp_port,
-                max_value=self.p2_src_end_udp_port,
-                size=2,
-                op="inc")
-        vm2.var(name="dIP",
-                min_value=self.p2_dst_start_ip,
-                max_value=self.p2_dst_end_ip,
-                size=4,
-                op="inc",
-                next_var="dport")
-        vm2.var(name="dport",
-                min_value=self.p2_dst_start_udp_port,
-                max_value=self.p2_dst_end_udp_port,
-                size=2,
-                op="inc")
-        vm2.write(fv_name="sIP", pkt_offset="IP.src")
-        vm2.write(fv_name="sport", pkt_offset="UDP.sport")
-        vm2.write(fv_name="dIP", pkt_offset="IP.dst")
-        vm2.write(fv_name="dport", pkt_offset="UDP.dport")
-        vm2.fix_chksum(offset='IP')
-
-        return base_pkt_a, base_pkt_b, vm1, vm2
-
-def register():
-    """Register this traffic profile to T-rex.
-
-    Do not change this function.
-
-    :return: Traffic streams.
-    :rtype: Object
-    """
-    return TrafficStreams()
diff --git a/GPL/traffic_profiles/trex/trex-stl-ethip4udp-238u63p.py b/GPL/traffic_profiles/trex/trex-stl-ethip4udp-238u63p.py
deleted file mode 100644
index f6b2276351..0000000000
--- a/GPL/traffic_profiles/trex/trex-stl-ethip4udp-238u63p.py
+++ /dev/null
@@ -1,169 +0,0 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Stream profile for T-rex traffic generator.
-
-Stream profile:
- - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
- - Packet: ETH / IP / UDP
- - Direction 0 --> 1:
-   - Source IP address range:      192.168.0.0 - 192.168.0.237
-   - Destination IP address range: 20.0.0.0
-   - Source UDP port range:        1024 - 1086
-   - Destination UDP port range:   1024
- - Direction 1 --> 0:
-   - Source IP address range:      20.0.0.0
-   - Destination IP address range: 68.142.68.0
-   - Source UDP port range:        1024
-   - Destination UDP port range:   1024 - 16017
-"""
-
-from trex.stl.api import *
-from profile_trex_stateless_base_class import TrafficStreamsBaseClass
-
-
-class TrafficStreams(TrafficStreamsBaseClass):
-    """Stream profile."""
-
-    def __init__(self):
-        """Initialization and setting of streams' parameters."""
-
-        super(TrafficStreamsBaseClass, self).__init__()
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"192.168.0.0"
-        self.p1_src_end_ip = u"192.168.0.237"
-        self.p1_dst_start_ip = u"20.0.0.0"
-        self.p1_dst_end_ip = u"20.0.0.0"
-
-        self.p2_src_start_ip = u"20.0.0.0"
-        self.p2_src_end_ip = u"20.0.0.0"
-        self.p2_dst_start_ip = u"68.142.68.0"
-        self.p2_dst_end_ip = u"68.142.68.0"
-
-        # UDP ports used in packet headers.
-        self.p1_src_start_udp_port = 1024
-        self.p1_src_end_udp_port = 1086
-        self.p1_dst_start_udp_port = 1024
-        self.p1_dst_end_udp_port = 1024
-
-        self.p2_src_start_udp_port = 1024
-        self.p2_src_end_udp_port = 1024
-        self.p2_dst_start_udp_port = 1024
-        self.p2_dst_end_udp_port = 16017
-
-    def define_packets(self):
-        """Defines the packets to be sent from the traffic generator.
-
-        Packet definition: | ETH | IP | UDP |
-
-        :returns: Packets to be sent from the traffic generator.
-        :rtype: tuple
-        """
-
-        # Direction 0 --> 1
-        base_pkt_a = (
-            Ether() /
-            IP(
-                src=self.p1_src_start_ip,
-                dst=self.p1_dst_start_ip,
-                proto=17
-            ) /
-            UDP(
-                sport=self.p1_src_start_udp_port,
-                dport=self.p1_dst_start_udp_port
-            )
-        )
-        # Direction 1 --> 0
-        base_pkt_b = (
-            Ether() /
-            IP(
-                src=self.p2_src_start_ip,
-                dst=self.p2_dst_start_ip,
-                proto=17
-            ) /
-            UDP(
-                sport=self.p2_src_start_udp_port,
-                dport=self.p2_dst_start_udp_port
-            )
-        )
-
-        # Direction 0 --> 1
-        vm1 = STLVM()
-        vm1.var(name="sIP",
-                min_value=self.p1_src_start_ip,
-                max_value=self.p1_src_end_ip,
-                size=4,
-                op="inc",
-                next_var="sport")
-        vm1.var(name="sport",
-                min_value=self.p1_src_start_udp_port,
-                max_value=self.p1_src_end_udp_port,
-                size=2,
-                op="inc")
-        vm1.var(name="dIP",
-                min_value=self.p1_dst_start_ip,
-                max_value=self.p1_dst_end_ip,
-                size=4,
-                op="inc")
-        vm1.var(name="dport",
-                min_value=self.p1_dst_start_udp_port,
-                max_value=self.p1_dst_end_udp_port,
-                size=2,
-                op="inc")
-        vm1.write(fv_name="sIP", pkt_offset="IP.src")
-        vm1.write(fv_name="sport", pkt_offset="UDP.sport")
-        vm1.write(fv_name="dIP", pkt_offset="IP.dst")
-        vm1.write(fv_name="dport", pkt_offset="UDP.dport")
-        vm1.fix_chksum(offset='IP')
-        # Direction 0 --> 1
-        vm2 = STLVM()
-        vm2.var(name="sIP",
-                min_value=self.p2_src_start_ip,
-                max_value=self.p2_src_end_ip,
-                size=4,
-                op="inc",
-                next_var="sport")
-        vm2.var(name="sport",
-                min_value=self.p2_src_start_udp_port,
-                max_value=self.p2_src_end_udp_port,
-                size=2,
-                op="inc")
-        vm2.var(name="dIP",
-                min_value=self.p2_dst_start_ip,
-                max_value=self.p2_dst_end_ip,
-                size=4,
-                op="inc",
-                next_var="dport")
-        vm2.var(name="dport",
-                min_value=self.p2_dst_start_udp_port,
-                max_value=self.p2_dst_end_udp_port,
-                size=2,
-                op="inc")
-        vm2.write(fv_name="sIP", pkt_offset="IP.src")
-        vm2.write(fv_name="sport", pkt_offset="UDP.sport")
-        vm2.write(fv_name="dIP", pkt_offset="IP.dst")
-        vm2.write(fv_name="dport", pkt_offset="UDP.dport")
-        vm2.fix_chksum(offset='IP')
-
-        return base_pkt_a, base_pkt_b, vm1, vm2
-
-def register():
-    """Register this traffic profile to T-rex.
-
-    Do not change this function.
-
-    :return: Traffic streams.
-    :rtype: Object
-    """
-    return TrafficStreams()