Small changes in semiweekly job

- rename the job
- small corrections in the job

Change-Id: I46c3920dfa1b8b0d220b1a6a507a944f3346db05
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 0 insertions, 429 deletions

diff --git a/bootstrap-vpp-master-verify-semiweekly.sh b/bootstrap-vpp-master-verify-semiweekly.sh
deleted file mode 100644
index 2c07d84d1f..0000000000
--- a/bootstrap-vpp-master-verify-semiweekly.sh
+++ /dev/null
@@ -1,429 +0,0 @@
-#!/bin/bash
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a ght (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not usecopy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -x
-
-RETURN_STATUS=0
-
-cat /etc/hostname
-cat /etc/hosts
-
-export DEBIAN_FRONTEND=noninteractive
-sudo apt-get -y update
-sudo apt-get -y install libpython2.7-dev python-virtualenv
-
-PYBOT_ARGS="--noncritical MULTI_THREAD"
-
-ARCHIVE_ARTIFACTS=(log.html output.xml report.html output_perf_data.json)
-
-CUR_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-export PYTHONPATH=${CUR_DIR}
-
-
-# 1st step: Download and prepare VPP packages
-
-# Temporarily download VPP packages from nexus.fd.io
-rm -f *.deb
-if [ "${#}" -ne "0" ]; then
-    arr=(${@})
-    echo ${arr[0]}
-else
-    # Download the latest VPP build .deb install packages
-    echo Downloading VPP packages...
-    bash ./resources/tools/download_install_vpp_pkgs.sh --skip-install
-fi
-
-VPP_DEBS=(*.deb)
-echo ${VPP_DEBS[@]}
-
-VPP_VER=$(echo ${VPP_DEBS#vpp-})
-VPP_VER=$(echo ${VPP_VER%.deb})
-echo VPP version to be tested: ${VPP_VER}
-
-set +x
-echo "******************************************************************************"
-echo "1st step: Download VPP packages                                       FINISHED"
-echo "******************************************************************************"
-set -x
-
-
-# 2nd step: Start virtual env and install requirements
-
-echo Starting virtual env...
-virtualenv env
-. env/bin/activate
-
-echo Installing requirements...
-pip install -r requirements.txt
-
-set +x
-echo "******************************************************************************"
-echo "2nd step: Start virtual env and install requirements                  FINISHED"
-echo "******************************************************************************"
-set -x
-
-
-# 3rd step: Prepare VIRL system
-echo Preparing VIRL system...
-
-VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30")
-VIRL_SERVER=""
-
-VIRL_USERNAME=jenkins-in
-VIRL_PKEY=priv_key
-VIRL_SERVER_STATUS_FILE="status"
-VIRL_SERVER_EXPECTED_STATUS="PRODUCTION"
-
-SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error"
-
-function ssh_do() {
-    echo
-    echo "### "  ssh $@
-    ssh ${SSH_OPTIONS} $@
-}
-
-rm -f ${VIRL_PKEY}
-cat > ${VIRL_PKEY} <<EOF
------BEGIN RSA PRIVATE KEY-----
-MIIEpQIBAAKCAQEA+IHXq87GcqMR1C47rzx6Cbip5Ghq8pKrbqKrP5Nf41HcYrT6
-GOXl9nFWKsMOzIlIn+8y7Il27eZh7csQGApbg8QLiHMtcYEmWNzKZpkqg4nuAPxX
-VXwlKgnKX902SrET9Gp9TDayiHtCRWVfrlPPPSA0UEXW6BjLN/uHJ+W/Xzrrab+9
-asBVa05vT2W6n0KJ66zfCaeDM912mQ6SttscAwFoWDmdHlegiVqrlIG2ABxOvxxz
-L3dM3iSmlmQlzv9bThjo+nI4KFYh6m5wrZmAo5r/4q9CIJc21HVnTqkGOWJIZz6J
-73lePJVSq5gYqaoGw3swFEA/MDkOx7baWKSoLQIDAQABAoIBAQCNBeolNp+JWJ76
-gQ4fwLsknyXSV6sxYyhkDW4PEwwcTU06uqce0AAzXVffxne0fMe48x47+zqBgPbb
-4huM+Pu8B9nfojUMr5TaYtl9Zbgpk3F8H7dT7LKOa6XrxvZTZrADSRc30+Z26zPN
-e9zTaf42Gvt0/l0Zs1BHwbaOXqO+XuwJ3/F9Sf3PQYWXD3EOWjpHDP/X/1vAs6lV
-SLkm6J/9KKE1m6I6LTYjIXuYt4SXybW6N2TSy54hhQtYcDUnIU2hR/PHVWKrGA0J
-kELgrtTNTdbML27O5gFWU4PLUEYTZ9fN11D6qUZKxLcPOiPPHXkiILMRCCnG5DYI
-ksBAU/YlAoGBAPxZO9VO18TYc8THV1nLKcvT2+1oSs1UcA2wNQMU55t910ZYinRa
-MRwUhMOf8Mv5wOeiZaRICQB1PnVWtDVmGECgPpK6jUxqAwn8rgJcnoafLGL5YKMY
-RVafTe6N5LXgCaOcJrk21wxs6v7ninEbUxxc575urOvZMBkymDw91dwbAoGBAPwa
-YRhKhrzFKZzdK0RadVjnxKvolUllpoqqg3XuvmeAJHAOAnaOgVWq68NAcp5FZJv0
-2D2Up7TX8pjf9MofP1SJbcraKBpK4NzfNkA0dSdEi+FhVofAJ9umB2o5LW1n7sab
-UIrjsdzSJK/9Zb9yTTHPyibYzNEgaJV1HsbxfEFXAoGAYO2RmvRm0phll18OQVJV
-IpKk9kLKAKZ/R/K32hAsikBC8SVPQTPniyaifFWx81diblalff2hX4ipTf7Yx24I
-wMIMZuW7Im/R7QMef4+94G3Bad7p7JuE/qnAEHJ2OBnu+eYfxaK35XDsrq6XMazS
-NqHE7hOq3giVfgg+C12hCKMCgYEAtu9dbYcG5owbehxzfRI2/OCRsjz/t1bv1seM
-xVMND4XI6xb/apBWAZgZpIFrqrWoIBM3ptfsKipZe91ngBPUnL9s0Dolx452RVAj
-yctHB8uRxWYgqDkjsxtzXf1HnZBBkBS8CUzYj+hdfuddoeKLaY3invXLCiV+PpXS
-U4KAK9kCgYEAtSv0m5+Fg74BbAiFB6kCh11FYkW94YI6B/E2D/uVTD5dJhyEUFgZ
-cWsudXjMki8734WSpMBqBp/J8wG3C9ZS6IpQD+U7UXA+roB7Qr+j4TqtWfM+87Rh
-maOpG56uAyR0w5Z9BhwzA3VakibVk9KwDgZ29WtKFzuATLFnOtCS46E=
------END RSA PRIVATE KEY-----
-EOF
-chmod 600 ${VIRL_PKEY}
-
-#
-# Pick a random host from the array of VIRL servers, and attempt
-# to reach it and verify it's status.
-#
-# The server must be reachable, and have a "status" file with
-# the content "PRODUCTION", to be selected.
-#
-# If the server is not reachable, or does not have the correct
-# status, remove it from the array and start again.
-#
-# Abort if there are no more servers left in the array.
-#
-while [[ ! "$VIRL_SERVER" ]]
-do
-    num_hosts=${#VIRL_SERVERS[@]}
-    if [ $num_hosts == 0 ]
-    then
-        echo "No more VIRL candidate hosts available, failing."
-        exit 127
-    fi
-    element=$[ $RANDOM % $num_hosts ]
-    virl_server_candidate=${VIRL_SERVERS[$element]}
-    virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${virl_server_candidate} cat $VIRL_SERVER_STATUS_FILE 2>&1)
-    echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\"
-    if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ]
-    then
-        # Candidate is in good status. Select this server.
-        VIRL_SERVER="$virl_server_candidate"
-    else
-        # Candidate is in bad status. Remove from array.
-        VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}")
-    fi
-done
-
-
-VIRL_DIR_LOC="/tmp"
-VPP_DEBS_VIRL=(${VPP_DEBS[@]})
-
-# Prepend directory location at remote host to deb file list
-for index in "${!VPP_DEBS_VIRL[@]}"; do
-    VPP_DEBS_VIRL[${index}]=${VIRL_DIR_LOC}/${VPP_DEBS_VIRL[${index}]}
-done
-
-echo "Updated file names: " ${VPP_DEBS_VIRL[@]}
-
-cat ${VIRL_PKEY}
-# Copy the files to VIRL host
-scp ${SSH_OPTIONS} *.deb \
-    ${VIRL_USERNAME}@${VIRL_SERVER}:${VIRL_DIR_LOC}/
-
-result=$?
-if [ "${result}" -ne "0" ]; then
-    echo "Failed to copy vpp deb files to virl host"
-    echo ${result}
-    exit ${result}
-fi
-
-# Start a simulation on VIRL server
-echo "Starting simulation on VIRL server"
-
-function stop_virl_simulation {
-    ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER}\
-        "stop-testcase ${VIRL_SID}"
-}
-
-VIRL_SID=$(ssh ${SSH_OPTIONS} \
-    ${VIRL_USERNAME}@${VIRL_SERVER} \
-    "start-testcase -c double-ring-nested ${VPP_DEBS_VIRL[@]}")
-retval=$?
-if [ "$?" -ne "0" ]; then
-    echo "VIRL simulation start failed"
-    exit ${retval}
-fi
-
-if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9_]{6} ]]; then
-    echo "No VIRL session ID reported."
-    exit 127
-fi
-
-# Upon script exit, cleanup the VIRL simulation execution
-trap stop_virl_simulation EXIT
-echo ${VIRL_SID}
-
-ssh_do ${VIRL_USERNAME}@${VIRL_SERVER} cat /scratch/${VIRL_SID}/topology.yaml
-
-# Download the topology file from VIRL session
-scp ${SSH_OPTIONS} \
-    ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/topology.yaml \
-    topologies/enabled/topology_VIRL.yaml
-
-retval=$?
-if [ "$?" -ne "0" ]; then
-    echo "Failed to copy topology file from VIRL simulation"
-    exit ${retval}
-fi
-
-set +x
-echo "******************************************************************************"
-echo "3rd step: Start the simulation on the VIRL server                     FINISHED"
-echo "******************************************************************************"
-set -x
-
-
-# 4th step: Run functional test suites
-
-RC=0
-MORE_FAILS=0
-
-echo Running functional tests on the VIRL system...
-
-# There are used three iterations of functional tests there
-# to check the stability and reliability of the results.
-for test_set in 1 2 3
-do
-    echo
-    echo Functional test loop: ${test_set}
-    echo
-
-    pybot -L TRACE \
-        -v TOPOLOGY_PATH:topologies/enabled/topology_VIRL.yaml \
-        --include vm_envAND3_node_single_link_topo \
-        --include vm_envAND3_node_double_link_topo \
-        --exclude PERFTEST \
-        --noncritical EXPECTED_FAILING \
-        --output log_func_test_set${test_set} \
-        tests/
-    PARTIAL_RC=$(echo $?)
-    if [ ${PARTIAL_RC} -eq 250 ]; then
-        MORE_FAILS=1
-    fi
-    RC=$((RC+PARTIAL_RC))
-done
-
-set +x
-echo "******************************************************************************"
-echo "4th step: Run functional tests                                        FINISHED"
-echo "******************************************************************************"
-set -x
-
-
-# 5th step: Reserve and prepare HW system
-
-echo Making a reservation for the HW system...
-
-# Space separated list of available testbeds, described by topology files
-TOPOLOGIES="topologies/available/lf_testbed1-X710-X520.yaml \
-            topologies/available/lf_testbed2-X710-X520.yaml \
-            topologies/available/lf_testbed3-X710-X520.yaml"
-
-# Reservation dir
-RESERVATION_DIR="/tmp/reservation_dir"
-INSTALLATION_DIR="/tmp/install_dir"
-
-WORKING_TOPOLOGY=""
-
-# We iterate over available topologies and wait until we reserve topology
-while :; do
-    for TOPOLOGY in ${TOPOLOGIES};
-    do
-        python ${CUR_DIR}/resources/tools/topo_reservation.py -t ${TOPOLOGY}
-        if [ $? -eq 0 ]; then
-            WORKING_TOPOLOGY=${TOPOLOGY}
-            echo "Reserved: ${WORKING_TOPOLOGY}"
-            break
-        fi
-    done
-
-    if [ ! -z "${WORKING_TOPOLOGY}" ]; then
-        # Exit the infinite while loop if we made a reservation
-        break
-    fi
-
-    # Wait ~3minutes before next try
-    SLEEP_TIME=$[ ( $RANDOM % 20 ) + 180 ]s
-    echo "Sleeping ${SLEEP_TIME}"
-    sleep ${SLEEP_TIME}
-done
-
-function cancel_all {
-    python ${CUR_DIR}/resources/tools/topo_installation.py -c -d ${INSTALLATION_DIR} -t $1
-    python ${CUR_DIR}/resources/tools/topo_reservation.py -c -t $1
-}
-
-# Upon script exit, cleanup the VIRL simulation execution
-# and cancel the reservation and installation of HW system
-# and delete all vpp packages.
-trap "stop_virl_simulation; cancel_all ${WORKING_TOPOLOGY}" EXIT
-
-python ${CUR_DIR}/resources/tools/topo_installation.py -t ${WORKING_TOPOLOGY} \
-                                                       -d ${INSTALLATION_DIR} \
-                                                       -p ${VPP_DEBS[@]}
-
-if [ $? -eq 0 ]; then
-    echo "VPP Installed on hosts from: ${WORKING_TOPOLOGY}"
-else
-    echo "Failed to copy vpp deb files to DUTs"
-    exit 1
-fi
-
-set +x
-echo "******************************************************************************"
-echo "5th step: Making a reservation for HW system                          FINISHED"
-echo "******************************************************************************"
-set -x
-
-# 6th step: Run performance tests
-
-# Performance tests on HW system
-echo Performance tests on HW system
-
-pybot ${PYBOT_ARGS} \
-    -L TRACE \
-    -v TOPOLOGY_PATH:${WORKING_TOPOLOGY} \
-    --include perftest_long \
-    --output log_perf_test_set \
-    tests/
-
-PARTIAL_RC=$(echo $?)
-if [ ${PARTIAL_RC} -eq 250 ]; then
-    MORE_FAILS=1
-fi
-RC=$((RC+PARTIAL_RC))
-
-set +x
-echo "******************************************************************************"
-echo "6th step: Run performance tests                                       FINISHED"
-echo "******************************************************************************"
-set -x
-
-
-# Set RETURN_STATUS=1 if some critical test failed
-if [ ! ${RC} -eq 0 ]; then
-        RETURN_STATUS=1
-fi
-
-# Log the final result
-if [ ${RC} -eq 0 ]; then
-    set +x
-    echo
-    echo "=============================================================================="
-    echo "Final result of all test loops:                                       | PASS |"
-    echo "All critical tests have passed."
-    echo "=============================================================================="
-    echo
-    set -x
-elif [ ${MORE_FAILS} -eq 0 ]; then
-    if [ ${RC} -eq 1 ]; then
-        HLP_STR="test has"
-    else
-        HLP_STR="tests have"
-    fi
-    set +x
-    echo
-    echo "=============================================================================="
-    echo "Final result of all test loops:                                       | FAIL |"
-    echo "${RC} critical ${HLP_STR} failed."
-    echo "=============================================================================="
-    echo
-    set -x
-else
-    set +x
-    echo
-    echo "=============================================================================="
-    echo "Final result of all test loops:                                       | FAIL |"
-    echo "More then 250 critical tests have failed in one test loop."
-    echo "=============================================================================="
-    echo
-    set -x
-fi
-
-
-# 7th step: Post-processing test data
-echo Post-processing test data...
-
-# Getting JSON perf data output
-python ${CUR_DIR}/resources/tools/robot_output_parser.py \
-       -i ${CUR_DIR}/log_perf_test_set.xml \
-       -o ${CUR_DIR}/output_perf_data.json \
-       -v ${VPP_VER}
-if [ ! $? -eq 0 ]; then
-    echo "Parsing ${CUR_DIR}/log_perf_test_set.xml failed"
-fi
-
-# Rebot output post-processing
-rebot --output output.xml ./log_func_test_set1.xml ./log_func_test_set2.xml \
-    ./log_func_test_set3.xml ./log_perf_test_set.xml
-
-# Remove unnecessary files
-rm -f ./log_test_set1.xml ./log_test_set2.xml ./log_test_set3.xml \
-    ./log_perf_test_set.xml
-
-# Archive artifacts
-mkdir archive
-for i in ${ARCHIVE_ARTIFACTS[@]}; do
-    cp $( readlink -f ${i} | tr '\n' ' ' ) archive/
-done
-
-echo Post-processing finished.
-
-exit ${RETURN_STATUS}