CSIT-1110 PAL: Fix warnings by moving new docs

Change-Id: Ie6483e9245872bc6991ed1f3c7aab60131e1eeb1
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 208 insertions, 0 deletions

diff --git a/docs/new/cpta/methodology/index.rst b/docs/new/cpta/methodology/index.rst
new file mode 100644
index 0000000000..ff69eb1f9a
--- /dev/null
+++ b/docs/new/cpta/methodology/index.rst
@@ -0,0 +1,208 @@
+.. _trending_methodology:
+
+Trending Methodology
+====================
+
+Overview
+--------
+
+This document describes a high-level design of a system for continuous
+performance measuring, trending and change detection for FD.io VPP SW
+data plane. It builds upon the existing FD.io CSIT framework with
+extensions to its throughput testing methodology, CSIT data analytics
+engine (PAL – Presentation-and-Analytics-Layer) and associated Jenkins
+jobs definitions.
+
+Proposed design replaces existing CSIT performance trending jobs and
+tests with new Performance Trending (PT) CSIT module and separate
+Performance Analysis (PA) module ingesting results from PT and
+analysing, detecting and reporting any performance anomalies using
+historical trending data and statistical metrics. PA does also produce
+trending dashboard and graphs with summary and drill-down views across
+all specified tests that can be reviewed and inspected regularly by
+FD.io developers and users community.
+
+Performance Tests
+-----------------
+
+Performance trending is currently relying on the Maximum Receive Rate
+(MRR) tests. MRR tests measure the packet forwarding rate under the
+maximum load offered by traffic generator over a set trial duration,
+regardless of packet loss. Maximum load for specified Ethernet frame
+size is set to the bi-directional link rate.
+
+Current parameters for performance trending MRR tests:
+
+- **Ethernet frame sizes**: 64B (78B for IPv6 tests) for all tests, IMIX for
+  selected tests (vhost, memif); all quoted sizes include frame CRC, but
+  exclude per frame transmission overhead of 20B (preamble, inter frame
+  gap).
+- **Maximum load offered**: 10GE and 40GE link (sub-)rates depending on NIC
+  tested, with the actual packet rate depending on frame size,
+  transmission overhead and traffic generator NIC forwarding capacity.
+
+  - For 10GE NICs the maximum packet rate load is 2* 14.88 Mpps for 64B,
+    a 10GE bi-directional link rate.
+  - For 40GE NICs the maximum packet rate load is 2* 18.75 Mpps for 64B,
+    a 40GE bi-directional link sub-rate limited by TG 40GE NIC used,
+    XL710.
+
+- **Trial duration**: 10sec.
+- **Execution frequency**: twice a day, every 12 hrs (02:00, 14:00 UTC).
+
+Note: MRR tests should be reporting bi-directional link rate (or NIC
+rate, if lower) if tested VPP configuration can handle the packet rate
+higher than bi-directional link rate, e.g. large packet tests and/or
+multi-core tests. In other words MRR = min(VPP rate, bi-dir link rate,
+NIC rate).
+
+Trend Analysis
+--------------
+
+All measured performance trend data is treated as time-series data that
+can be modelled as concatenation of groups, each group modelled
+using normal distribution. While sometimes the samples within a group
+are far from being distributed normally, we do not have a better tractable model.
+
+The group boundaries are selected based on `Minimum Description Length`_.
+
+TODO: Decide the level of detail for describing group selection.
+
+Anomaly Detection
+`````````````````
+
+Once the trend data is divided into groups, each group has its population average.
+The start of the following group is marked as a regression (or progression)
+if the new group's average is lower (higher) then the previous group's.
+
+Metrics
+```````
+
+TODO: Only needed for current trend compliance.
+
+Following statistical metrics are used as performance trend indicators
+over the rolling window of last <N> sets of historical measurement data:
+
+- **TMM** : **Trimmed Moving Median**, median across the data set of <N>
+  values excluding the outliers. Used as a trending value and as a
+  reference for anomaly detection.
+
+Trend Compliance
+````````````````
+
+TODO: Apply new detection algorithm also to trend compliance.
+
+Trend compliance metrics are targeted to provide an indication of trend
+changes over a short-term (i.e. weekly) and a long-term (i.e.
+quarterly), comparing the last trend value, TMM[last], to one from week
+ago, TMM[last - 1week] and to the maximum of trend values over last
+quarter except last week, max(TMM[(last - 3mths)..(last - 1week)]),
+respectively. This results in following trend compliance calculations:
+
++-------------------------+---------------------------------+-----------+------------------------------------------+
+| Trend Compliance Metric | Trend Change Formula            | Value     | Reference                                |
++=========================+=================================+===========+==========================================+
+| Short-Term Change       | (Value - Reference) / Reference | TMM[last] | TMM[last - 1week]                        |
++-------------------------+---------------------------------+-----------+------------------------------------------+
+| Long-Term Change        | (Value - Reference) / Reference | TMM[last] | max(TMM[(last - 3mths)..(last - 1week)]) |
++-------------------------+---------------------------------+-----------+------------------------------------------+
+
+Trend Presentation
+------------------
+
+Performance Dashboard
+`````````````````````
+
+Dashboard tables list a summary of per test-case VPP MRR performance
+trend and trend compliance metrics and detected number of anomalies.
+
+Separate tables are generated for tested VPP worker-thread-core
+combinations (1t1c, 2t2c, 4t4c). Test case names are linked to
+respective trending graphs for ease of navigation thru the test data.
+
+Trendline Graphs
+````````````````
+
+Trendline graphs show per test case measured MRR throughput values with
+associated gruop averages. The graphs are constructed as follows:
+
+- X-axis represents performance trend job build Id (csit-vpp-perf-mrr-
+  daily-master-build).
+- Y-axis represents MRR throughput in Mpps.
+- Markers to indicate anomaly classification:
+
+  - Outlier - gray circle around MRR value point.
+  - Regression - red circle.
+  - Progression - green circle.
+
+In addition the graphs show dynamic labels while hovering over graph
+data points, representing (trend job build Id, MRR value) and the actual
+vpp build number (b<XXX>) tested.
+
+
+Jenkins Jobs
+------------
+
+Performance Trending (PT)
+`````````````````````````
+
+CSIT PT runs regular performance test jobs measuring and collecting MRR
+data per test case. PT is designed as follows:
+
+1. PT job triggers:
+
+   a) Periodic e.g. daily.
+   b) On-demand gerrit triggered.
+
+2. Measurements and data calculations per test case:
+
+  a) Max Received Rate (MRR) - send packets at link rate over a trial
+     period, count total received packets, divide by trial period.
+
+3. Archive MRR per test case.
+4. Archive all counters collected at MRR.
+
+Performance Analysis (PA)
+`````````````````````````
+
+CSIT PA runs performance analysis including trendline calculation, trend
+compliance and anomaly detection using specified trend analysis metrics
+over the rolling window of last <N> sets of historical measurement data.
+PA is defined as follows:
+
+1. PA job triggers:
+
+   a) By PT job at its completion.
+   b) On-demand gerrit triggered.
+
+2. Download and parse archived historical data and the new data:
+
+   a) Download RF output.xml files from latest PT job and compressed
+      archived data.
+   b) Parse out the data filtering test cases listed in PA specification
+      (part of CSIT PAL specification file).
+
+3. Re-calculate new groups and their averages.
+
+4. Evaluate new test data (TODO: Update.):
+
+   a) If within the range of (TMA +/- 3*TMSD) => Result = Pass,
+      Reason = Normal. (to be updated base on the final Jenkins code).
+   b) If below the range => Result = Fail, Reason = Regression.
+   c) If above the range => Result = Pass, Reason = Progression.
+
+5. Generate and publish results
+
+   a) Relay evaluation result to job result. (to be updated base on the
+      final Jenkins code).
+   b) Generate a new set of trend summary dashboard and graphs.
+   c) Publish trend dashboard and graphs in html format on
+      https://docs.fd.io/.
+
+Testbed HW configuration
+------------------------
+
+The testbed HW configuration is described on
+`this FD.IO wiki page <https://wiki.fd.io/view/CSIT/CSIT_LF_testbed#FD.IO_CSIT_testbed_-_Server_HW_Configuration>`_.
+
+.. _Minimum Description Length: https://en.wikipedia.org/wiki/Minimum_description_length