diff options
author | 2018-06-20 12:56:41 +0200 | |
---|---|---|
committer | 2018-06-20 12:56:41 +0200 | |
commit | 2e63ef13b419da1198439617e66cb0f1cfe6be65 (patch) | |
tree | 634ba3c2134a3ed8c81f8ebdc1a9c4a2ef14712b /docs/new/cpta/methodology/index.rst | |
parent | 39b4a07718ecab94ea331362edb62dfcf678bd09 (diff) |
CSIT-1110: Replace old trending with the new one
+ Remove /new/ folders in presentation and docs.
Change-Id: I870002ba8509189196e778aa1292b93e83a3ec17
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
Diffstat (limited to 'docs/new/cpta/methodology/index.rst')
-rw-r--r-- | docs/new/cpta/methodology/index.rst | 253 |
1 files changed, 0 insertions, 253 deletions
diff --git a/docs/new/cpta/methodology/index.rst b/docs/new/cpta/methodology/index.rst deleted file mode 100644 index 612f6b32db..0000000000 --- a/docs/new/cpta/methodology/index.rst +++ /dev/null @@ -1,253 +0,0 @@ -.. _trending_methodology: - -Trending Methodology -==================== - -Overview --------- - -This document describes a high-level design of a system for continuous -performance measuring, trending and change detection for FD.io VPP SW -data plane. It builds upon the existing FD.io CSIT framework with -extensions to its throughput testing methodology, CSIT data analytics -engine (PAL – Presentation-and-Analytics-Layer) and associated Jenkins -jobs definitions. - -Proposed design replaces existing CSIT performance trending jobs and -tests with new Performance Trending (PT) CSIT module and separate -Performance Analysis (PA) module ingesting results from PT and -analysing, detecting and reporting any performance anomalies using -historical trending data and statistical metrics. PA does also produce -trending dashboard and graphs with summary and drill-down views across -all specified tests that can be reviewed and inspected regularly by -FD.io developers and users community. - -Performance Tests ------------------ - -Performance trending is currently relying on the Maximum Receive Rate -(MRR) tests. MRR tests measure the packet forwarding rate under the -maximum load offered by traffic generator over a set trial duration, -regardless of packet loss. Maximum load for specified Ethernet frame -size is set to the bi-directional link rate. - -Current parameters for performance trending MRR tests: - -- **Ethernet frame sizes**: 64B (78B for IPv6 tests) for all tests, IMIX for - selected tests (vhost, memif); all quoted sizes include frame CRC, but - exclude per frame transmission overhead of 20B (preamble, inter frame - gap). -- **Maximum load offered**: 10GE and 40GE link (sub-)rates depending on NIC - tested, with the actual packet rate depending on frame size, - transmission overhead and traffic generator NIC forwarding capacity. - - - For 10GE NICs the maximum packet rate load is 2* 14.88 Mpps for 64B, - a 10GE bi-directional link rate. - - For 40GE NICs the maximum packet rate load is 2* 18.75 Mpps for 64B, - a 40GE bi-directional link sub-rate limited by TG 40GE NIC used, - XL710. - -- **Trial duration**: 10sec. -- **Execution frequency**: twice a day, every 12 hrs (02:00, 14:00 UTC). - -Note: MRR tests should be reporting bi-directional link rate (or NIC -rate, if lower) if tested VPP configuration can handle the packet rate -higher than bi-directional link rate, e.g. large packet tests and/or -multi-core tests. In other words MRR = min(VPP rate, bi-dir link rate, -NIC rate). - -Trend Analysis --------------- - -All measured performance trend data is treated as time-series data that -can be modelled as concatenation of groups, each group modelled -using normal distribution. While sometimes the samples within a group -are far from being distributed normally, we do not have a better tractable model. - -The group boundaries are selected based on `Minimum Description Length`_. - -Minimum Description Length --------------------------- - -`Minimum Description Length`_ (MDL) is a particular formalization -of `Occam's razor`_ principle. - -The general formulation mandates to evaluate a large set of models, -but for anomaly detection purposes, it is usefuls to consider -a smaller set of models, so that scoring and comparing them is easier. - -For each candidate model, the data should be compressed losslessly, -which includes model definitions, encoded model parameters, -and the raw data encoded based on probabilities computed by the model. -The model resulting in shortest compressed message is the "the" correct model. - -For our model set (groups of normally distributed samples), -we need to encode group length (which penalizes too many groups), -group average (more on that later), group stdev and then all the samples. - -Luckily, the "all the samples" part turns out to be quite easy to compute. -If sample values are considered as coordinates in (multi-dimensional) -Euclidean space, fixing stdev means the point with allowed coordinates -lays on a sphere. Fixing average intersects the sphere with a (hyper)-plane, -and Gaussian probability density on the resulting sphere is constant. -So the only contribution is the "area" of the sphere, which only depends -on the number of samples and stdev. - -A somehow ambiguous part is in choosing which encoding -is used for group size, average and stdev. -Diferent encodings cause different biases to large or small values. -In our implementation we have chosen probability density -corresponding to uniform distribution (from zero to maximal sample value) -for stdev and average of the first group, -but for averages of subsequent groups we have chosen a distribution -which disourages deliminating groups with averages close together. - -One part of our implementation which is not precise enough -is handling of measurement precision. -The minimal difference in MRR values is currently 0.1 pps -(the difference of one packet over 10 second trial), -but the code assumes the precision is 1.0. -Also, all the calculations assume 1.0 is totally negligible, -compared to stdev value. - -The group selection algorithm currently has no parameters, -all the aforementioned encodings and handling of precision is hardcoded. -In principle, every group selection is examined, and the one encodable -with least amount of bits is selected. -As the bit amount for a selection is just sum of bits for every group, -finding the best selection takes number of comparisons -quadratically increasing with the size of data, -the overall time complexity being probably cubic. - -The resulting group distribution looks good -if samples are distributed normally enough within a group. -But for obviously different distributions (for example `bimodal distribution`_) -the groups tend to focus on less relevant factors (such as "outlier" density). - -Anomaly Detection -````````````````` - -Once the trend data is divided into groups, each group has its population average. -The start of the following group is marked as a regression (or progression) -if the new group's average is lower (higher) then the previous group's. - -Trend Compliance -```````````````` - -Trend compliance metrics are targeted to provide an indication of trend -changes over a short-term (i.e. weekly) and a long-term (i.e. -quarterly), comparing the last group average AVG[last], to the one from week -ago, AVG[last - 1week] and to the maximum of trend values over last -quarter except last week, max(AVG[last - 3mths]..ANV[last - 1week]), -respectively. This results in following trend compliance calculations: - -+-------------------------+---------------------------------+-----------+-------------------------------------------+ -| Trend Compliance Metric | Trend Change Formula | Value | Reference | -+=========================+=================================+===========+===========================================+ -| Short-Term Change | (Value - Reference) / Reference | AVG[last] | AVG[last - 1week] | -+-------------------------+---------------------------------+-----------+-------------------------------------------+ -| Long-Term Change | (Value - Reference) / Reference | AVG[last] | max(AVG[last - 3mths]..AVG[last - 1week]) | -+-------------------------+---------------------------------+-----------+-------------------------------------------+ - -Trend Presentation ------------------- - -Performance Dashboard -````````````````````` - -Dashboard tables list a summary of per test-case VPP MRR performance -trend and trend compliance metrics and detected number of anomalies. - -Separate tables are generated for tested VPP worker-thread-core -combinations (1t1c, 2t2c, 4t4c). Test case names are linked to -respective trending graphs for ease of navigation thru the test data. - -Trendline Graphs -```````````````` - -Trendline graphs show per test case measured MRR throughput values with -associated gruop averages. The graphs are constructed as follows: - -- X-axis represents performance trend job build Id (csit-vpp-perf-mrr- - daily-master-build). -- Y-axis represents MRR throughput in Mpps. -- Markers to indicate anomaly classification: - - - Regression - red circle. - - Progression - green circle. - -- The line shows average of each group. - -In addition the graphs show dynamic labels while hovering over graph -data points, representing (trend job build Id, MRR value) and the actual -vpp build number (b<XXX>) tested. - - -Jenkins Jobs ------------- - -Performance Trending (PT) -````````````````````````` - -CSIT PT runs regular performance test jobs measuring and collecting MRR -data per test case. PT is designed as follows: - -1. PT job triggers: - - a) Periodic e.g. daily. - b) On-demand gerrit triggered. - -2. Measurements and data calculations per test case: - - a) Max Received Rate (MRR) - send packets at link rate over a trial - period, count total received packets, divide by trial period. - -3. Archive MRR per test case. -4. Archive all counters collected at MRR. - -Performance Analysis (PA) -````````````````````````` - -CSIT PA runs performance analysis including trendline calculation, trend -compliance and anomaly detection using specified trend analysis metrics -over the rolling window of last <N> sets of historical measurement data. -PA is defined as follows: - -1. PA job triggers: - - a) By PT job at its completion. - b) On-demand gerrit triggered. - -2. Download and parse archived historical data and the new data: - - a) Download RF output.xml files from latest PT job and compressed - archived data. - b) Parse out the data filtering test cases listed in PA specification - (part of CSIT PAL specification file). - -3. Re-calculate new groups and their averages. - -4. Evaluate new test data: - - a) If the existing group is prolonged => Result = Pass, - Reason = Normal. (to be updated base on the final Jenkins code). - b) If a new group is detected with lower average => Result = Fail, Reason = Regression. - c) If a new group is detected with higher average => Result = Pass, Reason = Progression. - -5. Generate and publish results - - a) Relay evaluation result to job result. (to be updated base on the - final Jenkins code). - b) Generate a new set of trend summary dashboard and graphs. - c) Publish trend dashboard and graphs in html format on - https://docs.fd.io/. - -Testbed HW configuration ------------------------- - -The testbed HW configuration is described on -`this FD.IO wiki page <https://wiki.fd.io/view/CSIT/CSIT_LF_testbed#FD.IO_CSIT_testbed_-_Server_HW_Configuration>`_. - -.. _Minimum Description Length: https://en.wikipedia.org/wiki/Minimum_description_length -.. _Occam's razor: https://en.wikipedia.org/wiki/Occam%27s_razor -.. _bimodal distribution: https://en.wikipedia.org/wiki/Bimodal_distribution |