1807 report: updated virtual topologies for all functional tests.

Change-Id: I3053c7a9733ca7c03df993698472ad8d031dba96
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 34 insertions, 46 deletions

diff --git a/docs/report/dmm_functional_tests/overview.rst b/docs/report/dmm_functional_tests/overview.rst
index d30398a282..aa9e853817 100644
--- a/docs/report/dmm_functional_tests/overview.rst
+++ b/docs/report/dmm_functional_tests/overview.rst
@@ -4,20 +4,13 @@ Overview
 Virtual Topologies
 ------------------
 
-CSIT DMM functional tests are executed on virtualized topologies created using
-:abbr:`VIRL (Virtual Internet Routing Lab)` simulation platform contributed by
-Cisco. VIRL runs on physical baremetal servers hosted by LF FD.io project.
-Based on the packet path through server SUTs, one logical topology type
-is used for DMM DUT data plane testing:
+CSIT DMM functional tests are executed in VM-based virtual topologies
+created on demand using :abbr:`VIRL (Virtual Internet Routing Lab)`
+simulation platform contributed by Cisco. VIRL runs on physical
+baremetal servers hosted by LF FD.io project.
 
-#. NIC-to-NIC switching topologies.
-
-NIC-to-NIC Switching
-~~~~~~~~~~~~~~~~~~~~
-
-The simplest logical topology for software data plane application like
-DMM is NIC-to-NIC switching. Tested topologies for the 3-Node
-testbed is shown in the figure below.
+All tests are executed in three-node virtual test topology shown in the
+figure below.
 
 .. only:: latex
 
@@ -25,42 +18,37 @@ testbed is shown in the figure below.
 
         \begin{figure}[H]
             \centering
-                \graphicspath{{../_tmp/src/vpp_performance_tests/}}
-                \includegraphics[width=0.90\textwidth]{logical-3n-nic2nic}
-                \label{fig:logical-3n-nic2nic}
+                \graphicspath{{../_tmp/src/vpp_functional_tests/}}
+                \includegraphics[width=0.90\textwidth]{virtual-3n-nic2nic}
+                \label{fig:virtual-3n-nic2nic}
         \end{figure}
 
 .. only:: html
 
-    .. figure:: ../vpp_performance_tests/logical-3n-nic2nic.svg
-        :alt: logical-3n-nic2nic
+    .. figure:: ../vpp_functional_tests/virtual-3n-nic2nic.svg
+        :alt: virtual-3n-nic2nic
         :align: center
 
-SUT1 and SUT2 are two VMs (Ubuntu), TG
-is a Traffic Generator (TG, another Ubuntu VM). SUTs run sample server-client
-application using the DMM libs in Linux user-mode as a Device Under Test (DUT)
-within the VM. Currently TG node is not being used in DMM-CSIT. Logical
-connectivity between SUTs is provided using virtual NICs using VMs' virtio
-driver.
-
-Virtual testbeds are created on-demand whenever a verification job is started
-(e.g. triggered by the gerrit patch submission) and destroyed upon completion
-of all functional tests. Each node is a Virtual Machine and each connection
-that is drawn on the diagram is available for use in any test case. During the
-test execution, all nodes are reachable through the Management network connected
-to every node via dedicated virtual NICs and virtual links (not shown above
-for clarity).
-
-DMM Functional Tests Coverage
------------------------------
-
-Following DMM functional test areas are covered in the |csit-release| with
-results listed in this report:
-
-- **DMM basic testcase** - DMM has only one test case right now.
-  The testcase demonstrates single server[DUT1] and single client[DUT2] scenario
-  using DMM framework and kernel tcp/ip stack.
-
-  - Test case count: 1
-
-Total 1 DMM functional test in the |csit-release|.
+SUT1 and SUT2 are two VMs (running Ubuntu), TG is a Traffic Generator VM
+(running Ubuntu). SUTs run
+sample server-client application using the DMM libraries in Linux user-
+mode as a Device Under Test (DUT) within the VM. Currently TG node is
+not being used in DMM-CSIT. Network connectivity between SUTs and to TG
+is provided using virtual NICs and VMs' virtio drivers.
+
+Functional Tests Coverage
+-------------------------
+
+|csit-release| includes following DMM functionality tested in virtual VM
+environment:
+
++-----------------------+----------------------------------------------+
+| Functionality         |  Description                                 |
++=======================+==============================================+
+| DMM basic operation   | DMM has only one test case right now. The    |
+|                       | testcase demonstrates single server[DUT1]    |
+|                       | and single client[DUT2] scenario using DMM   |
+|                       | framework and kernel tcp/ip stack.           |
+|                       |                                              |
+|                       | Test case count: 1.                          |
++-----------------------+----------------------------------------------+