diff options
author | 2017-01-17 15:32:46 +0100 | |
---|---|---|
committer | 2017-02-01 15:48:56 +0100 | |
commit | 223a5c2eed4a935b27d390b89aa849a3825d86bb (patch) | |
tree | 40f8a566e883e6c027de54929ce1ba492d994140 /docs/report/honeycomb_functional_tests_virl/overview.rst | |
parent | 5362fa4f79de701a737b4d1ff794ad4e513f6486 (diff) |
CSIT 1701 report files and script
Add RST source files and script to generate CSIT 1701 report
Change-Id: I4345564547270ba10c64d6beebf2c2b5a83de459
Signed-off-by: pmikus <pmikus@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
Signed-off-by: pmikus <pmikus@cisco.com>
Diffstat (limited to 'docs/report/honeycomb_functional_tests_virl/overview.rst')
-rw-r--r-- | docs/report/honeycomb_functional_tests_virl/overview.rst | 127 |
1 files changed, 127 insertions, 0 deletions
diff --git a/docs/report/honeycomb_functional_tests_virl/overview.rst b/docs/report/honeycomb_functional_tests_virl/overview.rst new file mode 100644 index 0000000000..70a2777e7f --- /dev/null +++ b/docs/report/honeycomb_functional_tests_virl/overview.rst @@ -0,0 +1,127 @@ +Overview
+========
+
+Honeycombe Functional Test Topologies in VIRL
+---------------------------------------------
+
+CSIT Honeycomb functional tests are executed on virtualized topologies created
+using Virtual Internet Routing Lab (VIRL) simulation platform contributed by
+Cisco. VIRL runs on physical baremetal servers hosted by LF FD.io project. All
+tests are executed in two node logical test topology - TG node and SUT node.
+Used logical test topology is shown in the figure below.::
+
+ +------------------------+
+ | |
+ | +------------------+ |
+ +---------------> <--------------+
+ | | | | | |
+ | |------------> DUT1 <-----------+ |
+ | | | +------------------+ | | |
+ | | | | | |
+ | | | SUT1 | | |
+ | | +------------------------+ | |
+ | | | |
+ | | | |
+ | | +-----------+ | |
+ | +---------------> <---------------+ |
+ | | TG | |
+ +------------------> <------------------+
+ +-----------+
+
+Virtual testbeds are created dynamically whenever a verification job is
+started triggered by the patch submission to gerrit and destroyed upon
+completion of all functional tests. During test execution, all nodes are
+reachable thru the MGMT network connected to every node via dedicated NICs and
+links (not shown above for clarity). Each node is a Virtual Machine and each
+connection that is drawn on the diagram is available for use in any test case.
+
+Honeycomb Functional Tests Overview
+-----------------------------------
+
+The following Honeycomb functional test areas are included in the CSIT |release|
+with results listed in this report:
+
+- **Basic interface management** - CRUD for interface state,
+ - ipv4/ipv6 address, ipv4 neighbor, MTU value.
+ - Test case count: 7
+- **L2BD** - CRUD for L2 Bridge-Domain, interface assignment.
+ - Create up to two bridge domains with all implemented functions turned on.
+ - (flooding, unknown-unicast flooding, forwarding, learning, arp-termination)
+ - Assign up to two physical interfaces to a single bridge domain.
+ - Remove interface assignments, remove bridge domains.
+ - Test case count: 5
+- **L2FIB** - CRD for L2-FIB entries.
+ - Create 4 FIB entries
+ - (one of each for filter/forward, static/dynamic combinations).
+ - Remove FIB entries.
+ - Test case count: 7
+- **VxLAN** - CRD for VxLAN tunnels.
+ - Create VxLAN interface.
+ - Disable VxLAN interface.
+ - Re-create a disabled VxLAN interface.
+ - Test case count: 6
+- **VxLAN-GPE** - CRD for VxLAN GPE tunnels.
+ - Create VxLAN GPE interface.
+ - Disable VxLAN interface.
+ - Re-create a disabled VxLAN interface.
+ - Test case count: 7
+- **Vhost-user** - CRUD for Vhost-user interfaces.
+ - Create, modify and delete Vhost-user interface, as client and server.
+ - Test case count: 8
+- **TAP** - CRUD for Tap interface management.
+ - Create, modify and delete TAP interface.
+ - Test case count: 3
+- **VLAN** - CRUD for VLAN sub-interface management.
+ - Create VLAN sub-interface over a physical interface.
+ - Toggle interface state separately for super-interface and sub-interface.
+ - Configure IP address and bridge domain assignment on sub-interface.
+ - Configure VLAN tag rewrite on sub-interface.
+ - Test case count: 17
+- **ACL** - CRD for low-level classifiers: table and session management,
+ - interface assignment.
+ - Configure up to 2 classify tables.
+ - Configure up to 2 classify sessions on one table.
+ - Assign classify session to a physical interface.
+ - Remove tables, sessions, interface assignments.
+ - Test case count: 9
+- **PBB** - CRD for provider backbone bridge sub-interface.
+ - Configure, modify and remove a PBB sub-interface over a physical interface.
+ - Test case count: 9
+- **NSH_SFC** - CRD for NSH maps and entries, using NSH_SFC plugin.
+ - Configure up to 2 NSH entries.
+ - Configure up to 2 NSH maps.
+ - Modify and delete NSH maps and entries.
+ - Test case count: 8
+- **LISP** - CRD for Lisp: mapping, locator set, adjacency, map resolver.
+ - Toggle Lisp feature status.
+ - Configure and delete Lisp mapping as local and remote.
+ - Configure and delete Lisp adjacency mapping
+ - Configure and delete Lisp map resolver, proxy ITR.
+ - Test case count: 11
+- **NAT** - CRD for NAT entries, interface assignment.
+ - Configure and delete up to two NAT entries.
+ - Assign NAT entries to a physical interface.
+ - Test case count: 6
+- **Port mirroring** - CRD for SPAN port mirroring, interface assignment.
+ - Configure SPAN port mirroring on a physical interface, mirroring
+ - up to 2 interfaces.
+ - Remove SPAN configuration from interfaces.
+ - Test case count: 3
+- **Honeycomb Infractructure** - configuration persistence,
+ - Netconf notifications for interface events,
+ - Netconf negative tests aimed at specific issues
+
+Total 111 Honeycomb tests in the CSIT |release|.
+
+Operational data in Honeycomb should mirror configuration data at all times.
+Because of this, test cases follow this general pattern:
+
+#. read operational data of the feature using restconf.
+#. read status of the feature using VPP API dump.
+#. modify configuration of the feature using restconf.
+#. verify changes to operational data using restconf.
+#. verify changes using VPP API dump.
+
+Test cases involving network interfaces utilize the first two interfaces on
+the DUT node.
+
|