report 1904: updated methodology (nfv density, startup.conf) and vpp perf rls notes

Change-Id: If6d24511d5d29dcc25c21437364e0da15af3cca1
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

2 files changed, 22 insertions, 22 deletions

diff --git a/docs/report/introduction/methodology_nfv_service_density.rst b/docs/report/introduction/methodology_nfv_service_density.rst
index 23bdac9d7c..b09c1be629 100644
--- a/docs/report/introduction/methodology_nfv_service_density.rst
+++ b/docs/report/introduction/methodology_nfv_service_density.rst
@@ -19,15 +19,13 @@ different service density setups by varying two parameters:
 - Number of service instances (e.g. 1,2,4..10).
 - Number of NFs per service instance (e.g. 1,2,4..10).
 
-The initial implementation of NFV service density tests in
-|csit-release| is using two NF applications:
+Implementation of NFV service density tests in |csit-release| is using two NF
+applications:
 
 - VNF: VPP of the same version as vswitch running in KVM VM, configured with /8
   IPv4 prefix routing.
 - CNF: VPP of the same version as vswitch running in Docker Container,
-  configured with /8 IPv4 prefix routing. VPP got chosen as a fast IPv4 NF
-  application that supports required memif interface (L3fwd does not). This is
-  similar to all other Container tests in CSIT that use VPP.
+  configured with /8 IPv4 prefix routing.
 
 Tests are designed such that in all tested cases VPP vswitch is the most
 stressed application, as for each flow vswitch is processing each packet
@@ -103,9 +101,8 @@ physical core mapping ratios:
 
     - (main:core) = (2:1) => 2mt1c - 2 Main Threads on 1 Core, 1 Thread
       per NF, core shared between two NFs.
-    - (data:core) = (2:1) => 1dt1c - 1 Data-plane Threads on 1 Core per
-      NF.
-
+    - (data:core) = (2:1) => 2dt1c - 2 Data-plane Threads on 1 Core, 1
+      Thread per NF, core shared between two NFs.
 
 Maximum tested service densities are limited by a number of physical
 cores per NUMA. |csit-release| allocates cores within NUMA0. Support for
diff --git a/docs/report/introduction/methodology_vpp_startup_settings.rst b/docs/report/introduction/methodology_vpp_startup_settings.rst
index 81c5e4e73e..e3e8d29b23 100644
--- a/docs/report/introduction/methodology_vpp_startup_settings.rst
+++ b/docs/report/introduction/methodology_vpp_startup_settings.rst
@@ -1,29 +1,32 @@
 VPP Startup Settings
 --------------------
 
-CSIT code manipulates a number of VPP settings in startup.conf for optimized
-performance. List of common settings applied to all tests and test
-dependent settings follows.
+CSIT code manipulates a number of VPP settings in startup.conf for
+optimized performance. List of common settings applied to all tests and
+test dependent settings follows.
 
-See `VPP startup.conf`_
-for a complete set and description of listed settings.
+See `VPP startup.conf`_ for a complete set and description of listed
+settings.
 
 Common Settings
 ~~~~~~~~~~~~~~~
 
-List of vpp startup.conf settings applied to all tests:
+List of VPP startup.conf settings applied to all tests:
 
 #. heap-size <value> - set separately for ip4, ip6, stats, main
    depending on scale tested.
-#. no-tx-checksum-offload - disables UDP / TCP TX checksum offload in DPDK.
-   Typically needed for use faster vector PMDs (together with
+#. no-tx-checksum-offload - disables UDP / TCP TX checksum offload in
+   DPDK. Typically needed for use faster vector PMDs (together with
    no-multi-seg).
-#. buffers-per-numa <value> - increases number of buffers allocated, needed
-   in scenarios with large number of interfaces and worker threads.
-   Value is per CPU socket. Default is 16384. CSIT is setting statically
-   107520 buffers per CPU thread (215040 if HTT is enabled). This value is also
-   maximum possible amount limited by number of memory mappings in DPDK
-   libraries for 2MB Hugepages used in CSIT.
+#. buffers-per-numa <value> - sets a number of memory buffers allocated
+   to VPP per CPU socket. VPP default is 16384. Needs to be increased for
+   scenarios with large number of interfaces and worker threads. To
+   accommodate for scale tests, CSIT is setting it to the maximum possible
+   value corresponding to the limit of DPDK memory mappings (currently
+   256). For Xeon Skylake platforms configured with 2MB hugepages and VPP
+   data-size and buffer-size defaults (2048B and 2496B respectively), this
+   results in value of 215040 (256 * 840 = 215040, 840 * 2496B buffers fit
+   in 2MB hugepage ). For Xeon Haswell nodes value of 107520 is used.
 
 Per Test Settings
 ~~~~~~~~~~~~~~~~~