CSIT-744 Update report content for proper parsing

Follow the good practices for formatting. Update the content of release
report RST files to use the proper directives like :cite:, :footnote:,
:abbr:, :captions: etc.With these markings we will be able to format
output in proper way and style it in various sphinx output builders.

Change-Id: Ibbb538d43c3bd364a6acdcc990097a477f49de00
Signed-off-by: Peter Mikus <pmikus@cisco.com>

2 files changed, 6 insertions, 449 deletions

diff --git a/docs/report/nsh_sfc_functional_tests/overview.rst b/docs/report/nsh_sfc_functional_tests/overview.rst
index 79403a2272..6420d6a660 100644
--- a/docs/report/nsh_sfc_functional_tests/overview.rst
+++ b/docs/report/nsh_sfc_functional_tests/overview.rst
@@ -4,15 +4,13 @@ Overview
 Tested Virtual Topologies

 -------------------------

 

-CSIT NSH_SFC functional tests are executed on virtualized topologies created

-using Virtual Internet Routing Lab (VIRL) simulation platform contributed by

+CSIT NSH_SFC functional tests are executed on virtualized topologies created using

+:abbr:`VIRL (Virtual Internet Routing Lab)` simulation platform contributed by

 Cisco. VIRL runs on physical baremetal servers hosted by LF FD.io project.

-Majority,of the tests are executed in the three node logical test topology -

+Majority of the tests are executed in the three node logical test topology -

 Traffic Generator (TG) node and two Systems Under Test (SUT) nodes connected in

 a loop. Some tests use two node logical test topology - TG node and SUT1 node.

-Both logical test topologies are shown in the figures below.

-

-::

+Both logical test topologies are shown in the figures below.::

 

     +------------------------+           +------------------------+

     |                        |           |                        |

@@ -68,9 +66,7 @@ For the test cases that require DUT (VPP) to communicate with VM over the
 vhost-user interfaces, a nested VM is created on SUT1 and/or SUT2 for the

 duration of these particular test cases only. DUT (VPP) test topology with VM

 is shown in the figure below including the applicable packet flow thru the VM

-(marked in the figure with ``***``).

-

-::

+(marked in the figure with ``***``).::

 

     +------------------------+           +------------------------+

     |      +----------+      |           |      +----------+      |

diff --git a/docs/report/nsh_sfc_functional_tests/test_environment.rst b/docs/report/nsh_sfc_functional_tests/test_environment.rst
index 79ca0e90c7..ca7285d5e7 100644
--- a/docs/report/nsh_sfc_functional_tests/test_environment.rst
+++ b/docs/report/nsh_sfc_functional_tests/test_environment.rst
@@ -1,440 +1 @@
-Test Environment

-================

-

-CSIT NSH_SFC functional tests are currently executed in FD.IO VIRL testbed. The

-physical VIRL testbed infrastructure consists of three identical VIRL hosts:

-

-- All hosts are Cisco UCS C240-M4 (2x Intel(R) Xeon(R) CPU E5-2699 v3 @2.30GHz,

-  18c, 512GB RAM)

-- Hosts run Ubuntu 14.04.3

-- VIRL software versions:

-

-  - STD server version 0.10.24.7

-  - UWM server version 0.10.24.7

-

-The VIRL host to run VIRL simulation is selected based on least load algorithm

-per VIRL simulation.

-

-Every VIRL simulation uses the same three-node - Traffic Generator (TG node) and

-two Systems Under Test (SUT1 and SUT2) - "double-ring" topology. The appropriate

-pre-built VPP packages built by Jenkins for the patch under review are then

-installed on the two SUTs, along with their /etc/vpp/startup.conf file, in all

-VIRL simulations.

-

-SUT Configuration - VIRL Guest VM

----------------------------------

-

-Configuration of the SUT VMs is defined in file

-

-   /csit/resources/tools/virl/topologies/double-ring-nested.xenial.virl

-

-- List of SUT VM interfaces:::

-

-    <interface id="0" name="GigabitEthernet0/4/0"/>

-    <interface id="1" name="GigabitEthernet0/5/0"/>

-    <interface id="2" name="GigabitEthernet0/6/0"/>

-    <interface id="3" name="GigabitEthernet0/7/0"/>

-

-- Number of 2MB hugepages: 1024

-

-- Maximum number of memory map areas: 20000

-

-- Kernel Shared Memory Max: 2147483648 (vm.nr_hugepages * 2 * 1024 * 1024)

-

-SUT Configuration - VIRL Guest OS Linux

----------------------------------------

-

-In CSIT terminology, the VM operating system for both SUTs that |vpp-release| has

-been tested with, is the following:

-

-**#. Ubuntu VIRL image**

-

-This image implies Ubuntu 16.04.1 LTS, current as of yyyy-mm-dd (that is,

-package versions are those that would have been installed by a "apt-get update",

-"apt-get upgrade" on that day), produced by CSIT disk image build scripts.

-

-The exact list of installed packages and their versions (including the Linux

-kernel package version) are included in CSIT source repository:

-

-  resources/tools/disk-image-builder/ubuntu/lists/|virl-image-ubuntu|

-

-A replica of this VM image can be built by running the "build.sh" script in CSIT

-repository resources/tools/disk-image-builder/ubuntu.

-

-**#. CentOS VIRL image**

-

-The Centos7.3 image is ready to be used but no tests running on it now.

-Corresponding Jenkins jobs are under preparation.

-

-The exact list of installed packages and their versions (including the Linux

-kernel package version) are included in CSIT source repository:

-

-  resources/tools/disk-image-builder/ubuntu/lists/|virl-image-centos|

-

-A replica of this VM image can be built by running the "build.sh" script in CSIT

-repository resources/tools/disk-image-builder/centos.

-

-**#. Nested VM image**

-

-In addition to the "main" VM image, tests which require VPP to communicate to a

-VM over a vhost-user interface, utilize a "nested" VM image.

-

-This "nested" VM is dynamically created and destroyed as part of a test case,

-and therefore the "nested" VM image is optimized to be small, lightweight and

-have a short boot time. The "nested" VM image is not built around any

-established Linux distribution, but is based on `BuildRoot

-<https://buildroot.org/>`_, a tool for building embedded Linux systems. Just as

-for the "main" image, scripts to produce an identical replica of the "nested"

-image are included in CSIT GIT repository, and the image can be rebuilt using

-the "build.sh" script at:

-

-   resources/tools/disk-image-builder/ubuntu/lists/nested

-

-DUT Configuration - VPP

------------------------

-

-Every System Under Test runs VPP SW application in Linux user-mode as a Device

-Under Test (DUT) node.

-

-**DUT port configuration**

-

-Port configuration of DUTs is defined in topology file that is generated per

-VIRL simulation based on the definition stored in file

-

-   /csit/resources/tools/virl/topologies/double-ring-nested.xenial.yaml

-

-Example of DUT nodes configuration:::

-

-    DUT1:

-        type: DUT

-        host: "10.30.51.157"

-        port: 22

-        username: cisco

-        honeycomb:

-          user: admin

-          passwd: admin

-          port: 8183

-          netconf_port: 2831

-        priv_key: |

-          -----BEGIN RSA PRIVATE KEY-----

-          MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb

-          v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd

-          vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2

-          4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc

-          1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs

-          8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7

-          0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN

-          EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN

-          0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU

-          MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD

-          p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW

-          79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG

-          OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD

-          GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef

-          bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg

-          8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu

-          f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u

-          UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/

-          +m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT

-          D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/

-          sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn

-          g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY

-          qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8

-          EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD

-          BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN

-          -----END RSA PRIVATE KEY-----

-

-        interfaces:

-          port1:

-            mac_address: "fa:16:3e:9b:89:52"

-            pci_address: "0000:00:04.0"

-            link: link1

-          port2:

-            mac_address: "fa:16:3e:7a:33:60"

-            pci_address: "0000:00:05.0"

-            link: link4

-          port3:

-            mac_address: "fa:16:3e:29:b7:ae"

-            pci_address: "0000:00:06.0"

-            link: link3

-          port4:

-            mac_address: "fa:16:3e:76:8d:ff"

-            pci_address: "0000:00:07.0"

-            link: link6

-      DUT2:

-        type: DUT

-        host: "10.30.51.156"

-        port: 22

-        username: cisco

-        honeycomb:

-          user: admin

-          passwd: admin

-          port: 8183

-          netconf_port: 2831

-        priv_key: |

-          -----BEGIN RSA PRIVATE KEY-----

-          MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb

-          v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd

-          vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2

-          4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc

-          1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs

-          8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7

-          0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN

-          EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN

-          0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU

-          MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD

-          p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW

-          79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG

-          OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD

-          GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef

-          bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg

-          8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu

-          f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u

-          UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/

-          +m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT

-          D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/

-          sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn

-          g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY

-          qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8

-          EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD

-          BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN

-          -----END RSA PRIVATE KEY-----

-

-        interfaces:

-          port1:

-            mac_address: "fa:16:3e:ad:6c:7d"

-            pci_address: "0000:00:04.0"

-            link: link2

-          port2:

-            mac_address: "fa:16:3e:94:a4:99"

-            pci_address: "0000:00:05.0"

-            link: link5

-          port3:

-            mac_address: "fa:16:3e:75:92:da"

-            pci_address: "0000:00:06.0"

-            link: link3

-          port4:

-            mac_address: "fa:16:3e:2c:b1:2a"

-            pci_address: "0000:00:07.0"

-            link: link6

-

-**VPP Version**

-

-|vpp-release|

-

-**VPP Installed Packages**

-::

-

-    $ dpkg -l vpp\*

-    Desired=Unknown/Install/Remove/Purge/Hold

-    | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend

-    |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)

-    ||/ Name           Version       Architecture Description

-    +++-==============-=============-============-=============================================

-    ii  vpp            17.07-release amd64        Vector Packet Processing--executables

-    ii  vpp-dbg        17.07-release amd64        Vector Packet Processing--debug symbols

-    ii  vpp-dev        17.07-release amd64        Vector Packet Processing--development support

-    ii  vpp-dpdk-dev   17.07-release amd64        Vector Packet Processing--development support

-    ii  vpp-dpdk-dkms  17.07-release amd64        DPDK 2.1 igb_uio_driver

-    ii  vpp-lib        17.07-release amd64        Vector Packet Processing--runtime libraries

-    ii  vpp-plugins    17.07-release amd64        Vector Packet Processing--runtime plugins

-

-**VPP Startup Configuration**

-

-VPP startup configuration is common for all test cases.

-

-::

-

-    $ cat /etc/vpp/startup.conf

-    unix {

-      nodaemon

-      log /tmp/vpp.log

-      full-coredump

-    }

-

-    api-trace {

-      on

-    }

-

-    api-segment {

-      gid vpp

-    }

-

-    cpu {

-        ## In the VPP there is one main thread and optionally the user can create worker(s)

-        ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically

-

-        ## Manual pinning of thread(s) to CPU core(s)

-

-        ## Set logical CPU core where main thread runs

-        # main-core 1

-

-        ## Set logical CPU core(s) where worker threads are running

-        # corelist-workers 2-3,18-19

-

-        ## Automatic pinning of thread(s) to CPU core(s)

-

-        ## Sets number of CPU core(s) to be skipped (1 ... N-1)

-        ## Skipped CPU core(s) are not used for pinning main thread and working thread(s).

-        ## The main thread is automatically pinned to the first available CPU core and worker(s)

-        ## are pinned to next free CPU core(s) after core assigned to main thread

-        # skip-cores 4

-

-        ## Specify a number of workers to be created

-        ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)

-        ## and main thread's CPU core

-        # workers 2

-

-        ## Set scheduling policy and priority of main and worker threads

-

-        ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)

-        ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)

-        # scheduler-policy fifo

-

-        ## Scheduling priority is used only for "real-time policies (fifo and rr),

-        ## and has to be in the range of priorities supported for a particular policy

-        # scheduler-priority 50

-    }

-

-    dpdk {

-        ## Change default settings for all intefaces

-        # dev default {

-            ## Number of receive queues, enables RSS

-            ## Default is 1

-            # num-rx-queues 3

-

-            ## Number of transmit queues, Default is equal

-            ## to number of worker threads or 1 if no workers treads

-            # num-tx-queues 3

-

-            ## Number of descriptors in transmit and receive rings

-            ## increasing or reducing number can impact performance

-            ## Default is 1024 for both rx and tx

-            # num-rx-desc 512

-            # num-tx-desc 512

-

-            ## VLAN strip offload mode for interface

-            ## Default is off

-            # vlan-strip-offload on

-        # }

-

-        ## Whitelist specific interface by specifying PCI address

-        # dev 0000:02:00.0

-

-        ## Whitelist specific interface by specifying PCI address and in

-        ## addition specify custom parameters for this interface

-        # dev 0000:02:00.1 {

-        #	num-rx-queues 2

-        # }

-

-        ## Change UIO driver used by VPP, Options are: uio_pci_generic, vfio-pci

-        ## and igb_uio (default)

-        # uio-driver uio_pci_generic

-

-        ## Disable mutli-segment buffers, improves performance but

-        ## disables Jumbo MTU support

-        # no-multi-seg

-

-        ## Increase number of buffers allocated, needed only in scenarios with

-        ## large number of interfaces and worker threads. Value is per CPU socket.

-        ## Default is 32768

-        # num-mbufs 128000

-

-        ## Change hugepages allocation per-socket, needed only if there is need for

-        ## larger number of mbufs. Default is 256M on each detected CPU socket

-        # socket-mem 2048,2048

-    }

-

-TG Configuration

-----------------

-

-Traffic Generator node is VM running the same OS Linux as SUTs. Ports of this

-VM are used as source (Tx) and destination (Rx) ports for the traffic.

-

-Traffic scripts of test cases are executed on this VM.

-

-**TG VM configuration**

-

-Configuration of the TG VMs is defined in file

-

-   /csit/resources/tools/virl/topologies/double-ring-nested.xenial.virl

-

-- List of TG VM interfaces:::

-

-    <interface id="0" name="eth1"/>

-    <interface id="1" name="eth2"/>

-    <interface id="2" name="eth3"/>

-    <interface id="3" name="eth4"/>

-    <interface id="4" name="eth5"/>

-    <interface id="5" name="eth6"/>

-

-**TG node port configuration**

-

-Port configuration of TG is defined in topology file that is generated per VIRL

-simulation based on the definition stored in file

-

-   /csit/resources/tools/virl/topologies/double-ring-nested.xenial.yaml

-

-Example of TG node configuration:::

-

-    TG:

-        type: TG

-        host: "10.30.51.155"

-        port: 22

-        username: cisco

-        priv_key: |

-          -----BEGIN RSA PRIVATE KEY-----

-          MIIEpgIBAAKCAQEAwUDlTpzSHpwLQotZOFS4AgcPNEWCnP1AB2hWFmvI+8Kah/gb

-          v8ruZU9RqhPs56tyKzxbhvNkY4VbH5F1GilHZu3mLqzM4KfghMmaeMEjO1T7BYYd

-          vuBfTvIluljfQ2vAlnYrDwn+ClxJk81m0pDgvrLEX4qVVh2sGh7UEkYy5r82DNa2

-          4VjzPB1J/c8a9zP8FoZUhYIzF4FLvRMjUADpbMXgJMsGpaZLmz95ap0Eot7vb1Cc

-          1LvF97iyBCrtIOSKRKA50ZhLGjMKmOwnYU+cP5718tbproDVi6VJOo7zeuXyetMs

-          8YBl9kWblWG9BqP9jctFvsmi5G7hXgq1Y8u+DwIDAQABAoIBAQC/W4E0DHjLMny7

-          0bvw2YKzD0Zw3fttdB94tkm4PdZv5MybooPnsAvLaXVV0hEdfVi5kzSWNl/LY/tN

-          EP1BgGphc2QgB59/PPxGwFIjDCvUzlsZpynBHe+B/qh5ExNQcVvsIOqWI7DXlXaN

-          0i/khOzmJ6HncRRah1spKimYRsaUUDskyg7q3QqMWVaqBbbMvLs/w7ZWd/zoDqCU

-          MY/pCI6hkB3QbRo0OdiZLohphBl2ShABTwjvVyyKL5UA4jAEneJrhH5gWVLXnfgD

-          p62W5CollKEYblC8mUkPxpP7Qo277zw3xaq+oktIZhc5SUEUd7nJZtNqVAHqkItW

-          79VmpKyxAoGBAPfU+kqNPaTSvp+x1n5sn2SgipzDtgi9QqNmC4cjtrQQaaqI57SG

-          OHw1jX8i7L2G1WvVtkHg060nlEVo5n65ffFOqeVBezLVJ7ghWI8U+oBiJJyQ4boD

-          GJVNsoOSUQ0rtuGd9eVwfDk3ol9aCN0KK53oPfIYli29pyu4l095kg11AoGBAMef

-          bPEMBI/2XmCPshLSwhGFl+dW8d+Klluj3CUQ/0vUlvma3dfBOYNsIwAgTP0iIUTg

-          8DYE6KBCdPtxAUEI0YAEAKB9ry1tKR2NQEIPfslYytKErtwjAiqSi0heM6+zwEzu

-          f54Z4oBhsMSL0jXoOMnu+NZzEc6EUdQeY4O+jhjzAoGBAIogC3dtjMPGKTP7+93u

-          UE/XIioI8fWg9fj3sMka4IMu+pVvRCRbAjRH7JrFLkjbUyuMqs3Arnk9K+gbdQt/

-          +m95Njtt6WoFXuPCwgbM3GidSmZwYT4454SfDzVBYScEDCNm1FuR+8ov9bFLDtGT

-          D4gsngnGJj1MDFXTxZEn4nzZAoGBAKCg4WmpUPaCuXibyB+rZavxwsTNSn2lJ83/

-          sYJGBhf/raiV/FLDUcM1vYg5dZnu37RsB/5/vqxOLZGyYd7x+Jo5HkQGPnKgNwhn

-          g8BkdZIRF8uEJqxOo0ycdOU7n/2O93swIpKWo5LIiRPuqqzj+uZKnAL7vuVdxfaY

-          qVz2daMPAoGBALgaaKa3voU/HO1PYLWIhFrBThyJ+BQSQ8OqrEzC8AnegWFxRAM8

-          EqrzZXl7ACUuo1dH0Eipm41j2+BZWlQjiUgq5uj8+yzy+EU1ZRRyJcOKzbDACeuD

-          BpWWSXGBI5G4CppeYLjMUHZpJYeX1USULJQd2c4crLJKb76E8gz3Z9kN

-          -----END RSA PRIVATE KEY-----

-

-        interfaces:

-          port3:

-            mac_address: "fa:16:3e:b9:e1:27"

-            pci_address: "0000:00:06.0"

-            link: link1

-            driver: virtio-pci

-          port4:

-            mac_address: "fa:16:3e:e9:c8:68"

-            pci_address: "0000:00:07.0"

-            link: link4

-            driver: virtio-pci

-          port5:

-            mac_address: "fa:16:3e:e8:d3:47"

-            pci_address: "0000:00:08.0"

-            link: link2

-            driver: virtio-pci

-          port6:

-            mac_address: "fa:16:3e:cf:ca:58"

-            pci_address: "0000:00:09.0"

-            link: link5

-            driver: virtio-pci

-

-**Traffic generator**

-

-Functional tests utilize Scapy as a traffic generator. There was used Scapy

-v2.3.1 for |vpp-release| tests.

-

+.. include:: ../vpp_functional_tests/test_environment.rst