Remove THIS tag and use unix endlines

The THIS tag has sneaked in 10Ge2P1X520-Eth-L2Xcbase-Eth-1Memif-1Dcr-Mrr
but usually it is only to be used in draft testing.

Not sure about the way non-unix endlines crept in.
Is not git supposed to perform endline conversions on text files?
Or are .robot, .rst, .yaml and .vat not recognized as text?

Change-Id: Ia78cf942c05c3029c340a8639782786f37e57469
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 150 insertions, 150 deletions

diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst
index 377bd30d3f..0309885c0d 100644
--- a/docs/report/vpp_performance_tests/csit_release_notes.rst
+++ b/docs/report/vpp_performance_tests/csit_release_notes.rst
@@ -1,150 +1,150 @@
-CSIT Release Notes

-==================

-

-Changes in CSIT |release|

--------------------------

-

-#. **VPP performance tests**

-

-   - *MRR tests* - New Maximum Receive Rate tests measure the packet

-     forwarding rate under the maximum load offered by traffic

-     generator over a set trial duration, regardless of packet loss.

-     MRR tests are used for continuous performance trending and for

-     comparison between releases.

-

-   - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy

-     tests measure performance of SRv6 Endpoint fronting SR-unaware

-     appliance via masquerading (End.AM), dynamic proxy (End.AD) or

-     static proxy (End.AS) SR functions.

-

-#. **Presentation and Analytics Layer**

-

-   - *Performance trending* - Added continuous performance trending and

-     analysis. New Performance Trending and Performance Analysis jobs

-     executed regular throughput tests, with results being subsequently

-     analysed and trend and anomalies summarized and presented in VPP

-     Performance Dashboard and trendline graphs.

-

-#. **Test Framework Optimizations**

-

-   - *Performance tests efficiency* - Qemu build/install optimizations,

-     warmup phase handling, vpp restart handling. Resulted in improved

-     stability and reduced total execution time by 30% for single pkt

-     size e.g. 64B/78B.

-

-   - *General code housekeeping* - ongoing RF keywords optimizations,

-     removal of redundant RF keywords.

-

-Performance Changes

--------------------

-

-Relative performance changes in measured packet throughput in CSIT

-|release| are calculated against the results from CSIT |release-1|

-report. Listed mean and standard deviation values are computed based on

-a series of the same tests executed against respective VPP releases to

-verify test results repeatibility, with percentage change calculated for

-mean values. Note that the standard deviation is quite high for a small

-number of packet throughput tests, what indicates poor test results

-repeatability and makes the relative change of mean throughput value not

-fully representative for these tests. The root causes behind poor

-results repeatibility vary between the test cases.

-

-NDR Changes

-~~~~~~~~~~~

-

-NDR small packet throughput changes between releases are available in a

-CSV and pretty ASCII formats:

-

-  - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,

-  - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,

-  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,

-  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.

-

-.. note::

-

-    Test results have been generated by

-    `FD.io test executor vpp performance jobs`_ with Robot Framework result

-    files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.

-

-PDR Changes

-~~~~~~~~~~~

-

-NDR small packet throughput changes between releases are available in a

-CSV and pretty ASCII formats:

-

-  - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,

-  - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,

-  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,

-  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.

-

-.. note::

-

-    Test results have been generated by

-    `FD.io test executor vpp performance jobs`_ with Robot Framework result

-    files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.

-

-MRR Changes

-~~~~~~~~~~~

-

-MRR small packet throughput changes between releases are available in a

-CSV and pretty ASCII formats:

-

-  - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,

-  - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,

-  - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_,

-  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_,

-  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,

-  - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.

-

-.. note::

-

-    Test results have been generated by

-    `FD.io test executor vpp mrr jobs <https://jenkins.fd.io/view/csit/job/csit-vpp-perf-mrr-daily-master/>`_

-    with Robot Framework result files csit-vpp-perf-mrr-daily-master__*__output.xml.gz

-    `archived here <https://docs.fd.io/csit/master/trending/_static/archive/>`_.

-

-Throughput Trending

--------------------

-

-In addition to reporting throughput changes between VPP releases, CSIT

-provides continuous performance trending for VPP master branch:

-

-#. `VPP Performance Dashboard <https://docs.fd.io/csit/master/trending/introduction/index.html>`_

-   - per VPP test case throughput trend, trend compliance and summary of

-   detected anomalies.

-

-#. `Trending Methodology <https://docs.fd.io/csit/master/trending/methodology/index.html>`_

-   - throughput test metrics, trend calculations and anomaly

-   classification (progression, regression, outlier).

-

-#. `Trendline Graphs <https://docs.fd.io/csit/master/trending/trending/index.html>`_

-   - per VPP build MRR throughput measurements against the trendline

-   with anomaly highlights, with associated CSIT test jobs.

-

-Known Issues

-------------

-

-List of known issues in CSIT |release| for VPP performance tests:

-

-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+

-| # | Issue                                           | Jira ID    | Description                                                     |

-+===+=================================================+============+=================================================================+

-| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570   | DPDK reporting rx-errors, indicating L1 issue. Suspected issue  |

-|   | on x520.                                        |            | with HW combination of X710-X520 in LF testbeds. Not observed   |

-|   |                                                 |            | outside of LF testbeds.                                         |

-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+

-| 2 | Lower than expected NDR throughput of DPDK      | CSIT-571   | Suspected NIC firmware or DPDK driver issue affecting NDR and   |

-|   | testpmd and VPP L2 path NDR throughput with     |            | PDR throughput on XL710 and X710 NICs.                          |

-|   | xl710 and x710 NICs, compared to x520 NICs.     |            |                                                                 |

-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+

-| 3 | Tagged Ethernet dot1q and dot1ad L2 path        | CSIT-1066  | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: |

-|   | throughput regression.                          |            | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd          |

-|   |                                                 |            | performance tests.                                              |

-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+

-| 4 | IPSec (software, no QAT HW) throughput          | CSIT-1064  | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR    |

-|   | regression.                                     |            | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected.    |

-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+

-| 5 | High failure rate of creating working container | CSIT-1065  | About 20% of orchestrated container topology tests failing data |

-|   | topologies with K8s/Ligato orchestration.       |            | plane verification indicating configuration issue. Suspected    |

-|   |                                                 |            | issue with Ligato vpp-agent.                                    |

-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+

+CSIT Release Notes
+==================
+
+Changes in CSIT |release|
+-------------------------
+
+#. **VPP performance tests**
+
+   - *MRR tests* - New Maximum Receive Rate tests measure the packet
+     forwarding rate under the maximum load offered by traffic
+     generator over a set trial duration, regardless of packet loss.
+     MRR tests are used for continuous performance trending and for
+     comparison between releases.
+
+   - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy
+     tests measure performance of SRv6 Endpoint fronting SR-unaware
+     appliance via masquerading (End.AM), dynamic proxy (End.AD) or
+     static proxy (End.AS) SR functions.
+
+#. **Presentation and Analytics Layer**
+
+   - *Performance trending* - Added continuous performance trending and
+     analysis. New Performance Trending and Performance Analysis jobs
+     executed regular throughput tests, with results being subsequently
+     analysed and trend and anomalies summarized and presented in VPP
+     Performance Dashboard and trendline graphs.
+
+#. **Test Framework Optimizations**
+
+   - *Performance tests efficiency* - Qemu build/install optimizations,
+     warmup phase handling, vpp restart handling. Resulted in improved
+     stability and reduced total execution time by 30% for single pkt
+     size e.g. 64B/78B.
+
+   - *General code housekeeping* - ongoing RF keywords optimizations,
+     removal of redundant RF keywords.
+
+Performance Changes
+-------------------
+
+Relative performance changes in measured packet throughput in CSIT
+|release| are calculated against the results from CSIT |release-1|
+report. Listed mean and standard deviation values are computed based on
+a series of the same tests executed against respective VPP releases to
+verify test results repeatibility, with percentage change calculated for
+mean values. Note that the standard deviation is quite high for a small
+number of packet throughput tests, what indicates poor test results
+repeatability and makes the relative change of mean throughput value not
+fully representative for these tests. The root causes behind poor
+results repeatibility vary between the test cases.
+
+NDR Changes
+~~~~~~~~~~~
+
+NDR small packet throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+  - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,
+  - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,
+  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,
+  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.
+
+.. note::
+
+    Test results have been generated by
+    `FD.io test executor vpp performance jobs`_ with Robot Framework result
+    files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.
+
+PDR Changes
+~~~~~~~~~~~
+
+NDR small packet throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+  - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,
+  - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,
+  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,
+  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.
+
+.. note::
+
+    Test results have been generated by
+    `FD.io test executor vpp performance jobs`_ with Robot Framework result
+    files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.
+
+MRR Changes
+~~~~~~~~~~~
+
+MRR small packet throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+  - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,
+  - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,
+  - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_,
+  - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_,
+  - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,
+  - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.
+
+.. note::
+
+    Test results have been generated by
+    `FD.io test executor vpp mrr jobs <https://jenkins.fd.io/view/csit/job/csit-vpp-perf-mrr-daily-master/>`_
+    with Robot Framework result files csit-vpp-perf-mrr-daily-master__*__output.xml.gz
+    `archived here <https://docs.fd.io/csit/master/trending/_static/archive/>`_.
+
+Throughput Trending
+-------------------
+
+In addition to reporting throughput changes between VPP releases, CSIT
+provides continuous performance trending for VPP master branch:
+
+#. `VPP Performance Dashboard <https://docs.fd.io/csit/master/trending/introduction/index.html>`_
+   - per VPP test case throughput trend, trend compliance and summary of
+   detected anomalies.
+
+#. `Trending Methodology <https://docs.fd.io/csit/master/trending/methodology/index.html>`_
+   - throughput test metrics, trend calculations and anomaly
+   classification (progression, regression, outlier).
+
+#. `Trendline Graphs <https://docs.fd.io/csit/master/trending/trending/index.html>`_
+   - per VPP build MRR throughput measurements against the trendline
+   with anomaly highlights, with associated CSIT test jobs.
+
+Known Issues
+------------
+
+List of known issues in CSIT |release| for VPP performance tests:
+
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| # | Issue                                           | Jira ID    | Description                                                     |
++===+=================================================+============+=================================================================+
+| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570   | DPDK reporting rx-errors, indicating L1 issue. Suspected issue  |
+|   | on x520.                                        |            | with HW combination of X710-X520 in LF testbeds. Not observed   |
+|   |                                                 |            | outside of LF testbeds.                                         |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 2 | Lower than expected NDR throughput of DPDK      | CSIT-571   | Suspected NIC firmware or DPDK driver issue affecting NDR and   |
+|   | testpmd and VPP L2 path NDR throughput with     |            | PDR throughput on XL710 and X710 NICs.                          |
+|   | xl710 and x710 NICs, compared to x520 NICs.     |            |                                                                 |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 3 | Tagged Ethernet dot1q and dot1ad L2 path        | CSIT-1066  | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: |
+|   | throughput regression.                          |            | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd          |
+|   |                                                 |            | performance tests.                                              |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 4 | IPSec (software, no QAT HW) throughput          | CSIT-1064  | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR    |
+|   | regression.                                     |            | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected.    |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 5 | High failure rate of creating working container | CSIT-1065  | About 20% of orchestrated container topology tests failing data |
+|   | topologies with K8s/Ligato orchestration.       |            | plane verification indicating configuration issue. Suspected    |
+|   |                                                 |            | issue with Ligato vpp-agent.                                    |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+