Report: Add SRv6, fix greps

Change-Id: I55fea325dbc54bc6f2f2e42f0b6166d68f2e7300
Signed-off-by: Tibor Frank <tifrank@cisco.com>

3 files changed, 83 insertions, 10 deletions

diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/index.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/index.rst
index 50074e1b6a..4507978b66 100644
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/index.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/index.rst
@@ -27,6 +27,7 @@ TGint2-to-SUT2-to-SUT1-to-TGint1.
     l2
     ip4
     ip6
+    srv6
     ip4_tunnels
     ip6_tunnels
     vm_vhost
diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst
index dee31cef84..7842fc8343 100644
--- a/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/l2.rst
@@ -22,22 +22,22 @@ VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph belo
             \label{fig:64B-1t1c-l2-sel1-ndrdisc-lat50}
     \end{figure}
 
+*Figure 1a. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
 .. only:: html
 
-   .. program-output:: cd ../../../../../ && set +x && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/container_memif/*
+   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
       :shell:
 
 .. only:: latex
 
    .. code-block:: bash
 
-      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* && grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/container_memif/*
-
-*Figure 1a. VPP 1thread 1core - packet latency for Phy-to-Phy L2 Ethernet
-Switching (base).*
+      $ grep -E "64B-1t1c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
 
 .. raw:: html
 
@@ -85,22 +85,22 @@ VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph belo
             \label{fig:64B-2t2c-l2-sel1-ndrdisc-lat50}
     \end{figure}
 
+*Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
+Switching (base).*
+
 CSIT source code for the test cases used for above plots can be found in CSIT
 git repository:
 
 .. only:: html
 
-   .. program-output:: cd ../../../../../ && set +x && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/container_memif/*
+   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/l2/ && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" *
       :shell:
 
 .. only:: latex
 
    .. code-block:: bash
 
-      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/* && grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/container_memif/*
-
-*Figure 2a. VPP 2threads 2cores - packet latency for Phy-to-Phy L2 Ethernet
-Switching (base).*
+      $ grep -E "64B-2t2c-(eth|dot1q|dot1ad)-(l2xcbase|l2bdbasemaclrn|l2bdscale.*|l2dbscale.*)-(eth.*)*ndrdisc" tests/vpp/perf/l2/*
 
 .. raw:: html
 
diff --git a/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst b/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst
new file mode 100644
index 0000000000..bb45c4b9a5
--- /dev/null
+++ b/docs/report/vpp_performance_tests/packet_latency_graphs/srv6.rst
@@ -0,0 +1,72 @@
+SRv6
+====
+
+This section includes summary graphs of VPP Phy-to-Phy packet latency
+with SRv6 measured at 50% of discovered NDR throughput
+rate. Latency is reported for VPP running in multiple configurations of
+VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
+physical CPU core(s) placement.
+
+VPP packet latency in 1t1c setup (1thread, 1core) is presented in the graph below.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-1t1c-ethip6-srv6-ndrdisc-lat50.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-1t1c-ethip6-srv6-ndrdisc-lat50}
+            \label{fig:78B-1t1c-ethip6-srv6-ndrdisc-lat50}
+    \end{figure}
+
+*Figure 1. VPP 1thread 1core - packet latency for Phy-to-Phy SRv6.*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/srv6
+      $ grep -E "78B-1t1c-ethip6.*srv6.*ndrdisc" *
+
+VPP packet latency in 2t2c setup (2thread, 2core) is presented in the graph below.
+
+.. raw:: html
+
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/78B-2t2c-ethip6-srv6-ndrdisc-lat50.html"></iframe>
+
+.. raw:: latex
+
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{78B-2t2c-ethip6-srv6-ndrdisc-lat50}
+            \label{fig:78B-2t2c-ethip6-srv6-ndrdisc-lat50}
+    \end{figure}
+
+*Figure 2. VPP 2threads 2cores - packet latency for Phy-to-Phy SRv6.*
+
+CSIT source code for the test cases used for above plots can be found in CSIT
+git repository:
+
+.. only:: html
+
+   .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/srv6 && grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" *
+      :shell:
+
+.. only:: latex
+
+   .. code-block:: bash
+
+      $ cd tests/vpp/perf/srv6
+      $ grep -E "78B-2t2c-ethip6.*srv6.*ndrdisc" *