aboutsummaryrefslogtreecommitdiffstats
path: root/docs/report/vpp_performance_tests
diff options
context:
space:
mode:
authorVratko Polak <vrpolak@cisco.com>2018-05-21 16:11:29 +0200
committerVratko Polak <vrpolak@cisco.com>2018-05-22 13:10:24 +0200
commit2809ce8e5400db6ad87f7b5cf25f14599142288a (patch)
tree32fd2e75f703e9ba067d95130852a3adea392286 /docs/report/vpp_performance_tests
parent9739ad805d43b7e92468b643c1f300f4a0651b70 (diff)
CSIT-986: Improve formatting of MDR documentation
Change-Id: I1a67deea51b7ffdc7730a52b56f57baa64747d7f Signed-off-by: Vratko Polak <vrpolak@cisco.com>
Diffstat (limited to 'docs/report/vpp_performance_tests')
-rw-r--r--docs/report/vpp_performance_tests/mdr_search.rst190
1 files changed, 95 insertions, 95 deletions
diff --git a/docs/report/vpp_performance_tests/mdr_search.rst b/docs/report/vpp_performance_tests/mdr_search.rst
index 374d9e9c97..e2d0065d92 100644
--- a/docs/report/vpp_performance_tests/mdr_search.rst
+++ b/docs/report/vpp_performance_tests/mdr_search.rst
@@ -18,7 +18,7 @@ This results in the shorter overall search
execution time when compared to a standard NDR/PDR binary search,
while guaranteeing the same or similar results.
-If needed MDR can be easily adopted to discover more throughput rates
+If needed, MDR can be easily adopted to discover more throughput rates
with different pre-defined PLRs.
.. Note:: All throughput rates are *always* bi-directional
@@ -37,12 +37,12 @@ The main properties of MDR search:
- Final phase executes measurements according to the final search
criteria.
-- Initial phase:
+- *Initial phase*:
- Uses link rate as a starting transmit rate and discovers the Maximum
Receive Rate (MRR) used as an input to the first intermediate phase.
-- Intermediate phases:
+- *Intermediate phases*:
- Start with initial trial duration (in the first phase) and converge
geometrically towards the final trial duration (in the final phase).
@@ -71,7 +71,7 @@ The main properties of MDR search:
- Internal search - `binary search`_, measures at transmit rates within the
(lower_bound, upper_bound) valid interval, halving the interval width.
-- Final phase is executed with the final test trial duration, and the final
+- *Final phase* is executed with the final test trial duration, and the final
width goal that determines resolution of the overall search.
Intermediate phases together with the final phase are called non-initial phases.
@@ -92,14 +92,14 @@ Caveats:
- Worst case MDR can take longer than a binary search e.g. in case of
drastic changes in behaviour for trials at varying durations.
-MDR Search Implementation
--------------------------
+Search Implementation
+---------------------
Following is a brief description of the current MDR search
implementation in FD.io CSIT.
-MDR Input Parameters
-````````````````````
+Input Parameters
+````````````````
#. *maximum_transmit_rate* - maximum packet transmit rate to be used by
external traffic generator, limited by either the actual Ethernet
@@ -130,33 +130,33 @@ Initial phase
1. First trial measures at maximum rate and discovers MRR.
- a) in: trial_duration = initial_trial_duration.
- b) in: offered_transmit_rate = maximum_transmit_rate.
- c) do: single trial.
- d) out: measured loss ratio.
- e) out: mrr = measured receive rate.
+ a. *in*: trial_duration = initial_trial_duration.
+ b. *in*: offered_transmit_rate = maximum_transmit_rate.
+ c. *do*: single trial.
+ d. *out*: measured loss ratio.
+ e. *out*: mrr = measured receive rate.
2. Second trial measures at MRR and discovers MRR2.
- a) in: trial_duration = initial_trial_duration.
- b) in: offered_transmit_rate = MRR.
- c) do: single trial.
- d) out: measured loss ratio.
- e) out: mrr2 = measured receive rate.
+ a. *in*: trial_duration = initial_trial_duration.
+ b. *in*: offered_transmit_rate = MRR.
+ c. *do*: single trial.
+ d. *out*: measured loss ratio.
+ e. *out*: mrr2 = measured receive rate.
3. Third trial measures at MRR2.
- a) in: trial_duration = initial_trial_duration.
- b) in: offered_transmit_rate = MRR2.
- c) do: single trial.
- d) out: measured loss ratio.
+ a. *in*: trial_duration = initial_trial_duration.
+ b. *in*: offered_transmit_rate = MRR2.
+ c. *do*: single trial.
+ d. *out*: measured loss ratio.
Non-initial phases
``````````````````
1. Main loop:
- a) in: trial_duration for the current phase.
+ a. *in*: trial_duration for the current phase.
Set to initial_trial_duration for the first intermediate phase;
to final_trial_duration for the final phase;
or to the element of interpolating geometric sequence
@@ -164,23 +164,23 @@ Non-initial phases
For example with two intermediate phases, trial_duration
of the second intermediate phase is the geometric average
of initial_strial_duration and final_trial_duration.
- b) in: relative_width_goal for the current phase.
+ b. *in*: relative_width_goal for the current phase.
Set to final_relative_width for the final phase;
doubled for each preceding phase.
For example with two intermediate phases,
the first intermediate phase uses quadruple of final_relative_width
and the second intermediate phase uses double of final_relative_width.
- c) in: ndr_interval, pdr_interval from the previous main loop iteration
+ c. *in*: ndr_interval, pdr_interval from the previous main loop iteration
or the previous phase.
If the previous phase is the initial phase, both intervals have
lower_bound = MRR2, uper_bound = MRR.
Note that the initial phase is likely to create intervals with invalid bounds.
- d) do: According to the procedure described in point 2,
- either exit the phase by jumping to g),
+ d. *do*: According to the procedure described in point 2,
+ either exit the phase (by jumping to 1.g.),
or prepare new transmit rate to measure with.
- e) do: Perform the trial measurement at the new transmit rate
+ e. *do*: Perform the trial measurement at the new transmit rate
and trial_duration, compute its loss ratio.
- f) do: Update the bounds of both intervals, based on the new measurement.
+ f. *do*: Update the bounds of both intervals, based on the new measurement.
The actual update rules are numerous, as NDR external search
can affect PDR interval and vice versa, but the result
agrees with rules of both internal and external search.
@@ -188,79 +188,79 @@ Non-initial phases
becomes the new lower_bound, while the old measurement
(previously acting as the invalid lower_bound)
becomes a new and valid upper_bound.
- Go to next iteration c), taking the updated intervals as new input.
- g) out: current ndr_interval and pdr_interval.
+ Go to next iteration (1.c.), taking the updated intervals as new input.
+ g. *out*: current ndr_interval and pdr_interval.
In the final phase this is also considered
to be the result of the whole search.
For other phases, the next phase loop is started
with the current results as an input.
-2. New transmit rate (or exit) calculation (for 1.d):
-
- a) If there is an invalid bound then prepare for external search:
-
- 1) If the most recent measurement at NDR lower_bound transmit rate
- had the loss higher than zero, then
- the new transmit rate is NDR lower_bound
- decreased by two NDR interval widths.
- 2) Else, if the most recent measurement at PDR lower_bound
- transmit rate had the loss higher than PLR, then
- the new transmit rate is PDR lower_bound
- decreased by two PDR interval widths.
- 3) Else, if the most recent measurement at NDR upper_bound
- transmit rate had no loss, then
- the new transmit rate is NDR upper_bound
- increased by two NDR interval widths.
- 4) Else, if the most recent measurement at PDR upper_bound
- transmit rate had the loss lower or equal to PLR, then
- the new transmit rate is PDR upper_bound
- increased by two PDR interval widths.
-
- b) Else, if NDR (or PDR) interval does not meet the current phase width goal,
- prepare for internal search. The new transmit rate is
- (lower bound + upper bound) / 2.
- It does not matter much which interval is investigated first.
- The current implementation starts with NDR, unless PDR interval is wider
- (but always preferring NDR is slightly better).
-
- c) Else, if some bound has still only been measured at a lower duration,
- prepare to re-measure at the current duration (and the same transmit rate).
- The order of priorities is:
-
- 1) NDR lower_bound,
- 2) PDR lower_bound,
- 3) NDR upper_bound,
- 4) PDR upper_bound.
-
- d) Else do not prepare any new rate, to exit the phase.
- This ensures that at the end of each non-initial phase
- all intervals are valid, narrow enough, and measured
- at current phase trial duration.
-
-Implementation details
-----------------------
-
-The algorithm as implemented contains additional details
-omitted from the description above.
-Here is a short description of them, without detailing their mutual interaction.
-
-1) Logarithmic transmit rate.
+2. New transmit rate (or exit) calculation (for 1.d.):
+
+ - If there is an invalid bound then prepare for external search:
+
+ - *If* the most recent measurement at NDR lower_bound transmit rate
+ had the loss higher than zero, then
+ the new transmit rate is NDR lower_bound
+ decreased by two NDR interval widths.
+ - Else, *if* the most recent measurement at PDR lower_bound
+ transmit rate had the loss higher than PLR, then
+ the new transmit rate is PDR lower_bound
+ decreased by two PDR interval widths.
+ - Else, *if* the most recent measurement at NDR upper_bound
+ transmit rate had no loss, then
+ the new transmit rate is NDR upper_bound
+ increased by two NDR interval widths.
+ - Else, *if* the most recent measurement at PDR upper_bound
+ transmit rate had the loss lower or equal to PLR, then
+ the new transmit rate is PDR upper_bound
+ increased by two PDR interval widths.
+ - Else, *if* NDR (or PDR) interval does not meet the current phase width goal,
+ prepare for internal search. The new transmit rate is
+ (lower bound + upper bound) / 2.
+ It does not matter much which interval is investigated first.
+ The current implementation starts with NDR, unless PDR interval is wider
+ (but always preferring NDR is slightly better).
+ - Else, *if* some bound has still only been measured at a lower duration,
+ prepare to re-measure at the current duration (and the same transmit rate).
+ The order of priorities is:
+
+ - NDR lower_bound,
+ - PDR lower_bound,
+ - NDR upper_bound,
+ - PDR upper_bound.
+ - *Else*, do not prepare any new rate, to exit the phase.
+ This ensures that at the end of each non-initial phase
+ all intervals are valid, narrow enough, and measured
+ at current phase trial duration.
+
+Implementation Deviations
+-------------------------
+
+This document so far has been describing a simplified version of MDR search algorithm.
+The full algorithm as implemented contains additional logic,
+which makes some of the details (but not general ideas) above incorrect.
+Here is a short description of the additional logic as a list of principles,
+explaining their main differences from (or additions to) the simplified description,
+but without detailing their mutual interaction.
+
+1. *Logarithmic transmit rate.*
In order to better fit the relative width goal,
the interval doubling and halving is done differently.
- For example, middle of 2 and 8 is 4, not 5.
-2) Optimistic maximum rate.
+ For example, the middle of 2 and 8 is 4, not 5.
+2. *Optimistic maximum rate.*
The increased rate is never higher than the maximum rate.
Upper bound at that rate is always considered valid.
-3) Pessimistic minimum rate.
+3. *Pessimistic minimum rate.*
The decreased rate is never lower than the minimum rate.
If a lower bound at that rate is invalid,
a phase stops refining the interval further (until it gets re-measured).
-4) Conservative interval updates.
+4. *Conservative interval updates.*
Measurements above current upper bound never update a valid upper bound,
even if drop ratio is low.
Measurements below current lower bound always update any lower bound
if drop ratio is high.
-5) Ensure sufficient interval width.
+5. *Ensure sufficient interval width.*
Narrow intervals make external search take more time to find a valid bound.
If the new transmit increased or decreased rate would result in width
less than the current goal, increase/decrease more.
@@ -268,14 +268,14 @@ Here is a short description of them, without detailing their mutual interaction.
makes the current interval too narrow.
Similarly, take care the measurements in the initial phase
create wide enough interval.
-6) Timeout for bad cases.
+6. *Timeout for bad cases.*
The worst case for MDR search is when each phase converges to intervals
way different than the results of the previous phase.
Rather than suffer total search time several times larger
than pure binary search, the implemented tests fail themselves
when the search takes too long (given by argument *timeout*).
-Test effectiveness comparison
+Test Effectiveness Comparison
-----------------------------
Introduction
@@ -286,9 +286,9 @@ to enable comparison against existing CSIT NDR and PDR binary searches.
The suites got chosen based on the level of consistency of their
historical NDR/PDR results:
-#. 10Ge2P1X520-Ethip4-Ip4Base-Ndrpdr - yielding very consistent binary
+#. *10Ge2P1X520-Ethip4-Ip4Base-Ndrpdr* - yielding very consistent binary
search results.
-#. 10Ge2P1X520-Eth-L2Bdbasemaclrn-Eth-2Vhostvr1024-1Vm-Ndrpdr - yielding
+#. *10Ge2P1X520-Eth-L2Bdbasemaclrn-Eth-2Vhostvr1024-1Vm-Ndrpdr* - yielding
somewhat inconsistent results.
Here "inconsistent" means the values found differ between runs,
@@ -306,16 +306,16 @@ the binary NDR/PDR result.
Each search algorithm has been run with three different
(final) trial durations: 10s, 30s and 60s.
-The table below compares overall test duration between the search tests.
+Tables below compares overall test duration between the search tests.
For simplicity only data for single thread 64B packet tests is listed,
as it takes the longest in all cases.
-The table is based on result of 6 runs.
+Data in tables is based on result of 6 runs.
Tables
``````
-.. table:: Search part of test duration
+.. table:: Table 1. Search part of test duration.
==================== ========== =========== =========== ========== =========== ===========
Duration+-avgdev [s] IP4 10s IP4 30s IP4 60s Vhost 10s Vhost 30s Vhost 60s
@@ -334,7 +334,7 @@ Tables
For the subtle details see `estimation of standard deviation`_,
we used zero ACF and c4==1.
-.. table:: MDR duration as percentage of NDR duration
+.. table:: Table 2. MDR duration as percentage of NDR duration.
==================================== ========= ========= ========= ========= ========= =========
Fraction+-stdev [%] IP4 10s IP4 30s IP4 60s Vhost 10s Vhost 30s Vhost 60s
@@ -359,7 +359,7 @@ In inconsistent tests MDR is still somewhat faster than NDR binary search,
but it is not by 50%, and it is hard to quantify as MDR samples have wildly
varying durations.
-Graphical examples
+Search Time Graphs
------------------
The following graphs were created from the data gathered from comparison runs,