Remove THIS tag and use unix endlines

The THIS tag has sneaked in 10Ge2P1X520-Eth-L2Xcbase-Eth-1Memif-1Dcr-Mrr
but usually it is only to be used in draft testing.

Not sure about the way non-unix endlines crept in.
Is not git supposed to perform endline conversions on text files?
Or are .robot, .rst, .yaml and .vat not recognized as text?

Change-Id: Ia78cf942c05c3029c340a8639782786f37e57469
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 87 insertions, 87 deletions

diff --git a/docs/report/vpp_unit_tests/overview.rst b/docs/report/vpp_unit_tests/overview.rst
index 9472680aa5..6165c71c50 100644
--- a/docs/report/vpp_unit_tests/overview.rst
+++ b/docs/report/vpp_unit_tests/overview.rst
@@ -1,87 +1,87 @@
-Overview

-========

-

-.. note::

-

-    This section includes an abbreviated version of the VPP Test Framework

-    overview maintained within the VPP project. Complete overview can be found

-    in `VPP test framework documentation`_.

-

-VPP Unit Test Framework

------------------------

-

-VPP Test Framework is used to ease writing, running and debugging unit tests

-for the VPP. It is based on python as a high level language to  allow rapid

-test development. scapy\_ is used as a tool for creating and dissecting

-packets.

-

-VPP Test Framework does not send any packets to VPP directly. Traffic is

-instead injected using VPP packet-generator interfaces. Packets are written

-into a temporary .pcap file, which is then read by the VPP code with packets

-getting injected into the VPP processing nodes.

-

-Similarly, VPP does not send any packets to VPP Test Framework directly.

-Instead, VPP packet capture feature is used to capture and write packets to a

-temporary .pcap file, which is then read and analyzed by the VPP Test

-Framework.

-

-For complete description of the VPP Test Framework including anatomy of a test

-case and detailed documentation of existing VPP unit test cases please refer

-to the `VPP test framework documentation`_

-

-Unit Tests Coverage

--------------------

-

-Following VPP functional test areas are covered in VPP unit test code included

-in VPP rls1710 with results listed in this report:

-

-- ACL Security - stateful and stateless security-groups access-control-lists.

-- APIs - VAPI, VOM, PAPI, JVPP.

-- ARP - ARP, proxy ARP, static arp.

-- BFD - API, Authentication, Authentication Change, CLI.

-- BFD IPv4 - sessions operation.

-- BFD IPv6 - sessions operation.

-- BIER - Bit Indexed Explicit Replication.

-- Classifier - classification with IP ACL, MAC ACL, IP PBR.

-- Container Integration - IPv4, IPv6 local-spoof connectivity tests.

-- CRUD Loopback - create, read, update, delete Loopback interfaces.

-- DHCP - DHCPv4/v6 Client and Proxy.

-- Distributed Virtual Router.

-- DS-Lite Softwire - softwire termination.

-- FIB - baseline and scale tests.

-- Flowprobe.

-- Geneve Tunnels.

-- GRE Tunnels - GRE IPv4/IPv6 tunnel, L2, VRF tests.

-- GTPU Tunnels - baseline GTPU tests.

-- IP Multicast Routing - IPv4/IPv6 multicast replication, connected source check.

-- IPSec - baseline IPSec sanity tests.

-- IPv4 FIB CRUD - add/update/delete IPv4 routes.

-- IPv4 Routing.

-- IP4 VRF Multi-instance - create, read, update, delete and verify IPv4 VRFs.

-- IPv6 Routing - baseline FIB operations, NS/RS exception handling.

-- IP6 VRF Multi-instance - create, read, update, delete and verify IPv6 VRFs.

-- IRB Integrated Routing-Bridging.

-- Kube-proxy - data plane NAT tests.

-- L2 FIB CRUD - add/update/delete L2 MAC entries.

-- L2BD Multi-instance.

-- L2BD Switching - L2 Bridge-Domain baseline tests incl. single- and dual-loop.

-- L2XC Multi-instance - L2 cross-connect multi-instance tests.

-- L2XC Switching - L2 cross-connect baseline tests incl. single- and dual-loop.

-- LISP Tunnels - basic LISP tests.

-- Load Balancer - IP4 GRE4, IP4 GRE6, IP6 GRE4, IP6 GRE6.

-- MACIP Access Control - ingress access control for IPv4, IPv6 with L2BDP and IP routing.

-- MAP Softwires - softwire termination.

-- MFIB Multicast FIB.

-- MPLS Switching - MPLS baseline, prefix independent convergence for MPLS PE.

-- NAT44 - NAT44 tests, IPFIX logging, VRF awareness, deterministic CGNAT.

-- NAT64 - NAT64 static and dynamic translation tests.

-- P2P Ethernet Subinterface.

-- PPPoE Encapsulation.

-- SPAN Switch Port Analyzer - packet mirroring.

-- SRv6 Routing - Segment Routing IPv6 tests.

-- TCP/IP Stack - unit tests, builtin client/server transfers.

-- UDP Stack - unit tests.

-- VTR VLAN Tag Rewrites - VLAN tag rewrite tests.

-- VXLAN Tunnels - baseline VXLAN tests including multicast.

-- VXLAN-GPE Tunnels - baseline VXLAN-GPE tunneling including multicast.

-- Other Tests - ping, session, template verification, timer tests.

+Overview
+========
+
+.. note::
+
+    This section includes an abbreviated version of the VPP Test Framework
+    overview maintained within the VPP project. Complete overview can be found
+    in `VPP test framework documentation`_.
+
+VPP Unit Test Framework
+-----------------------
+
+VPP Test Framework is used to ease writing, running and debugging unit tests
+for the VPP. It is based on python as a high level language to  allow rapid
+test development. scapy\_ is used as a tool for creating and dissecting
+packets.
+
+VPP Test Framework does not send any packets to VPP directly. Traffic is
+instead injected using VPP packet-generator interfaces. Packets are written
+into a temporary .pcap file, which is then read by the VPP code with packets
+getting injected into the VPP processing nodes.
+
+Similarly, VPP does not send any packets to VPP Test Framework directly.
+Instead, VPP packet capture feature is used to capture and write packets to a
+temporary .pcap file, which is then read and analyzed by the VPP Test
+Framework.
+
+For complete description of the VPP Test Framework including anatomy of a test
+case and detailed documentation of existing VPP unit test cases please refer
+to the `VPP test framework documentation`_
+
+Unit Tests Coverage
+-------------------
+
+Following VPP functional test areas are covered in VPP unit test code included
+in VPP rls1710 with results listed in this report:
+
+- ACL Security - stateful and stateless security-groups access-control-lists.
+- APIs - VAPI, VOM, PAPI, JVPP.
+- ARP - ARP, proxy ARP, static arp.
+- BFD - API, Authentication, Authentication Change, CLI.
+- BFD IPv4 - sessions operation.
+- BFD IPv6 - sessions operation.
+- BIER - Bit Indexed Explicit Replication.
+- Classifier - classification with IP ACL, MAC ACL, IP PBR.
+- Container Integration - IPv4, IPv6 local-spoof connectivity tests.
+- CRUD Loopback - create, read, update, delete Loopback interfaces.
+- DHCP - DHCPv4/v6 Client and Proxy.
+- Distributed Virtual Router.
+- DS-Lite Softwire - softwire termination.
+- FIB - baseline and scale tests.
+- Flowprobe.
+- Geneve Tunnels.
+- GRE Tunnels - GRE IPv4/IPv6 tunnel, L2, VRF tests.
+- GTPU Tunnels - baseline GTPU tests.
+- IP Multicast Routing - IPv4/IPv6 multicast replication, connected source check.
+- IPSec - baseline IPSec sanity tests.
+- IPv4 FIB CRUD - add/update/delete IPv4 routes.
+- IPv4 Routing.
+- IP4 VRF Multi-instance - create, read, update, delete and verify IPv4 VRFs.
+- IPv6 Routing - baseline FIB operations, NS/RS exception handling.
+- IP6 VRF Multi-instance - create, read, update, delete and verify IPv6 VRFs.
+- IRB Integrated Routing-Bridging.
+- Kube-proxy - data plane NAT tests.
+- L2 FIB CRUD - add/update/delete L2 MAC entries.
+- L2BD Multi-instance.
+- L2BD Switching - L2 Bridge-Domain baseline tests incl. single- and dual-loop.
+- L2XC Multi-instance - L2 cross-connect multi-instance tests.
+- L2XC Switching - L2 cross-connect baseline tests incl. single- and dual-loop.
+- LISP Tunnels - basic LISP tests.
+- Load Balancer - IP4 GRE4, IP4 GRE6, IP6 GRE4, IP6 GRE6.
+- MACIP Access Control - ingress access control for IPv4, IPv6 with L2BDP and IP routing.
+- MAP Softwires - softwire termination.
+- MFIB Multicast FIB.
+- MPLS Switching - MPLS baseline, prefix independent convergence for MPLS PE.
+- NAT44 - NAT44 tests, IPFIX logging, VRF awareness, deterministic CGNAT.
+- NAT64 - NAT64 static and dynamic translation tests.
+- P2P Ethernet Subinterface.
+- PPPoE Encapsulation.
+- SPAN Switch Port Analyzer - packet mirroring.
+- SRv6 Routing - Segment Routing IPv6 tests.
+- TCP/IP Stack - unit tests, builtin client/server transfers.
+- UDP Stack - unit tests.
+- VTR VLAN Tag Rewrites - VLAN tag rewrite tests.
+- VXLAN Tunnels - baseline VXLAN tests including multicast.
+- VXLAN-GPE Tunnels - baseline VXLAN-GPE tunneling including multicast.
+- Other Tests - ping, session, template verification, timer tests.