Methodology: GSO

- Report methodology

Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I1726af15ab003ff6ee4411ca1ceace986d3ee42b
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

2 files changed, 137 insertions, 0 deletions

diff --git a/docs/report/introduction/methodology.rst b/docs/report/introduction/methodology.rst
index 01059478ed..a597cea8a2 100644
--- a/docs/report/introduction/methodology.rst
+++ b/docs/report/introduction/methodology.rst
@@ -19,6 +19,7 @@ Test Methodology
     methodology_acls
     methodology_multi_core_speedup
     methodology_hoststack_testing/index
+    methodology_gso
     methodology_reconf
     methodology_vpp_startup_settings
     methodology_kvm_vms_vhost_user
diff --git a/docs/report/introduction/methodology_gso.rst b/docs/report/introduction/methodology_gso.rst
new file mode 100644
index 0000000000..35217d0b1e
--- /dev/null
+++ b/docs/report/introduction/methodology_gso.rst
@@ -0,0 +1,136 @@
+.. _gso_methodology:
+
+Generic Segmentation Offload Tests
+----------------------------------
+
+Overview
+~~~~~~~~
+
+Generic Segmentation Offload (GSO) reduces per-packet processing
+overhead by enabling applications  to pass a multi-packet buffer to
+(v)NIC and process a smaller number of large packets (e.g. frame size of
+64 KB), instead of processing higher numbers of small packets (e.g.
+frame size of 1500 B), thus reducing per-packet overhead.
+
+|csit-release| introduced GSO tests for VPP vhostuser and tapv2
+interfaces. All tests cases use iPerf3 client and server applications
+running TCP/IP as a traffic generator. For performance comparison the
+same tests are run without GSO enabled.
+
+GSO Test Topologies
+~~~~~~~~~~~~~~~~~~~
+
+Two VPP GSO test topologies are implemented in |csit-release|:
+
+1. iPerfC_GSOvirtio_LinuxVM --- GSOvhost_VPP_GSOvhost --- iPerfS_GSOvirtio_LinuxVM
+
+   - Tests VPP GSO on vhostuser interfaces and interaction with Linux
+     virtio with GSO enabled.
+
+1. iPerfC_GSOtap_LinuxNspace --- GSOtapv2_VPP_GSOtapv2 --- iPerfS_GSOtap_LinuxNspace
+
+   - Tests VPP GSO on tapv2 interfaces and interaction with Linux tap
+     with GSO enabled.
+
+Common configuration:
+
+- iPerfC (client) and iPerfS (server) run in TCP/IP mode without upper
+  bandwidth limit.
+- Trial duration is set to 30 sec.
+- iPerfC, iPerfS and VPP run in the single SUT node.
+
+
+VPP GSOtap Topology
+-------------------
+
+VPP Configuration
+~~~~~~~~~~~~~~~~~
+
+VPP GSOtap tests in |csit-release| are executed without using
+hyperthreading. VPP worker runs on a single core. Multi-core tests are
+not executed. Each interface belongs to separate namespace. Following core
+pinning scheme is used:
+
+- 1t1c (rxq=1, rx_qsz=4096, tx_qsz=4096)
+
+  - system isolated: 0,28,56,84
+  - vpp mt:  1
+  - vpp wt:  2
+  - vhost:   3-5
+  - iperf-s: 6
+  - iperf-c: 7
+
+
+iPerf3 Server Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+iPerf3 version used 3.7
+
+::
+
+  $ sudo -E -S ip netns exec tap1_namespace iperf3 \
+      --server --daemon --pidfile /tmp/iperf3_server.pid --logfile /tmp/iperf3.log --port 5201 --affinity <X>
+
+For the full iPerf3 reference please see:
+`iPerf3 docs <https://github.com/esnet/iperf/blob/master/docs/invoking.rst>`_.
+
+
+iPerf3 Client Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+iPerf3 version used 3.7
+
+::
+
+  $ sudo -E -S ip netns exec tap1_namespace iperf3 \
+      --client 2.2.2.2 --bind 1.1.1.1 --port 5201 --parallel <Y> --time 30.0 --affinity <X> --zerocopy
+
+For the full iPerf3 reference please see:
+`iPerf3 docs <https://github.com/esnet/iperf/blob/master/docs/invoking.rst>`_.
+
+
+VPP GSOvhost Topology
+---------------------
+
+VPP Configuration
+~~~~~~~~~~~~~~~~~
+
+VPP GSOvhost tests in |csit-release| are executed without using
+hyperthreading. VPP worker runs on a single core. Multi-core tests are
+not executed. Following core pinning scheme is used:
+
+- 1t1c (rxq=1, rx_qsz=1024, tx_qsz=1024)
+  - system isolated: 0,28,56,84
+  - vpp mt:  1
+  - vpp wt:  2
+  - vm-iperf-s: 3,4,5,6,7
+  - vm-iperf-c: 8,9,10,11,12
+  - iperf-s: 1
+  - iperf-c: 1
+
+iPerf3 Server Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+iPerf3 version used 3.7
+
+::
+
+  $ sudo iperf3 \
+      --server --daemon --pidfile /tmp/iperf3_server.pid --logfile /tmp/iperf3.log --port 5201 --affinity X
+
+For the full iPerf3 reference please see:
+`iPerf3 docs <https://github.com/esnet/iperf/blob/master/docs/invoking.rst>`_.
+
+
+iPerf3 Client Configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+iPerf3 version used 3.7
+
+::
+
+  $ sudo iperf3 \
+      --client 2.2.2.2 --bind 1.1.1.1 --port 5201 --parallel <Y> --time 30.0 --affinity X --zerocopy
+
+For the full iPerf3 reference please see:
+`iPerf3 docs <https://github.com/esnet/iperf/blob/master/docs/invoking.rst>`_.
\ No newline at end of file