Update the static content

Change-Id: I8869bddef992f75707b740533a57ad80a3696e73
Signed-off-by: Tibor Frank <tifrank@cisco.com>
(cherry picked from commit 1d3d8f9027f4e4aeb41ca92e2078066fda946804)

2 files changed, 28 insertions, 3 deletions

diff --git a/docs/report/introduction/general_notes.rst b/docs/report/introduction/general_notes.rst
index 50a9d4c4a3..e6a2a9875f 100644
--- a/docs/report/introduction/general_notes.rst
+++ b/docs/report/introduction/general_notes.rst
@@ -20,7 +20,25 @@ is listed separately, as follows:
    both for Phy-to-Phy (NIC-to-NIC) and Phy-to-VM-to-Phy (NIC-to-VM-to-NIC)
    forwarding topologies. Tested across a range of NICs, 10GE and 40GE
    interfaces, range of multi-thread and multi-core configurations. VPP
-   application runs in host user- mode. TRex is used as a traffic generator.
+   application runs in host user-mode. TRex is used as a traffic generator.
+
+#. **Container memif connections** -  VPP memif virtual interface (shared memory
+   interface) tests to interconnect VPP instances. VPP vswitch instance runs in
+   bare-metal user-mode handling Intel x520 NIC 10GbE interfaces and connecting
+   over memif (Master side) virtual interfaces to more instances of VPP running
+   in LXC or in Docker Containers, both with memif virtual interfaces (Slave
+   side). Tested across a range of NICs, 10GE and 40GE interfaces, range of
+   multi-thread and multi-core configurations. VPP application runs in host
+   user-mode. TRex is used as a traffic generator.
+
+#. **Container Orchestrated Performance Tests** - CSIT |release| introduced new
+   tests of Container topologies connected over the memif virtual interface
+   (shared memory interface). For these tests VPP vswitch instance runs in a
+   Docker Container handling Intel x520 NIC 10GbE interfaces and connecting over
+   memif (Master side) virtual interfaces to more instances of VPP running in
+   Docker Containers with memif virtual interfaces (Slave side). Tested across a
+   range of multi-thread and multi-core configurations. VPP application runs in
+   host user-mode. TRex is used as a traffic generator.
 
 #. **DPDK Performance Tests** - VPP is using DPDK code to control and drive
    the NICs and physical interfaces. Testpmd tests are used as a baseline to
diff --git a/docs/report/vpp_performance_tests/overview.rst b/docs/report/vpp_performance_tests/overview.rst
index 669c5d10b1..d9b31bd10e 100644
--- a/docs/report/vpp_performance_tests/overview.rst
+++ b/docs/report/vpp_performance_tests/overview.rst
@@ -135,6 +135,9 @@ CSIT |release| includes following performance test suites, listed per NIC type:
     VLAN tagged Ethernet frames.
   - **L2BD** - L2 Bridge-Domain switched-forwarding of untagged Ethernet frames
     with MAC learning; disabled MAC learning i.e. static MAC tests to be added.
+  - **L2BD Scale** - L2 Bridge-Domain switched-forwarding of untagged Ethernet
+    frames with MAC learning; disabled MAC learning i.e. static MAC tests to be
+    added with 20k, 200k and 2M FIB entries.
   - **IPv4** - IPv4 routed-forwarding.
   - **IPv6** - IPv6 routed-forwarding.
   - **IPv4 Scale** - IPv4 routed-forwarding with 20k, 200k and 2M FIB entries.
@@ -143,14 +146,18 @@ CSIT |release| includes following performance test suites, listed per NIC type:
     of 2 VMs using vhost-user interfaces, with VPP forwarding modes incl. L2
     Cross-Connect, L2 Bridge-Domain, VXLAN with L2BD, IPv4 routed-forwarding.
   - **COP** - IPv4 and IPv6 routed-forwarding with COP address security.
-  - **iACL** - IPv4 and IPv6 routed-forwarding with iACL address security.
+  - **ACL** - L2, IPv4 and IPv6 routed-forwarding with ACL address security.
   - **LISP** - LISP overlay tunneling for IPv4-over-IPv4, IPv6-over-IPv4,
     IPv6-over-IPv6, IPv4-over-IPv6 in IPv4 and IPv6 routed-forwarding modes.
   - **VXLAN** - VXLAN overlay tunnelling integration with L2XC and L2BD.
   - **QoS Policer** - ingress packet rate measuring, marking and limiting
     (IPv4).
-  - **CGNAT** - Carrier Grade Network Address Translation tests with varying
+  - **NAT** - (Source) Network Address Translation tests with varying
     number of users and ports per user.
+  - **Container memif connections** - VPP memif virtual interface tests to
+    interconnect VPP instances.
+  - **Container Orchestrated Topologies** - Container topologies connected over
+    the memif virtual interface.
 
 - 2port40GE XL710 Intel