CSIT Report update

Change-Id: I42efd42ec577723ef2b17a1753ae744986bb66ff
Signed-off-by: Peter Mikus <pmikus@cisco.com>
(cherry picked from commit 1c66ee7e4d3c0ac6375c1c5ca15bc349d8cb3bfa)

7 files changed, 198 insertions, 131 deletions

diff --git a/docs/report/csit_framework_documentation/csit_design.rst b/docs/report/csit_framework_documentation/csit_design.rst
index d8ea2c87d8..fef0285b99 100644
--- a/docs/report/csit_framework_documentation/csit_design.rst
+++ b/docs/report/csit_framework_documentation/csit_design.rst
@@ -107,6 +107,8 @@ A brief bottom-up description is provided here:
      - VPP;
      - DPDK-Testpmd;
      - DPDK-L3Fwd;
+     - Honeycomb;
+     - VPP Container orchestrated topologies;
 
    - Tools:
 
diff --git a/docs/report/dpdk_performance_tests/overview.rst b/docs/report/dpdk_performance_tests/overview.rst
index 6af7fe9032..a61d85395a 100644
--- a/docs/report/dpdk_performance_tests/overview.rst
+++ b/docs/report/dpdk_performance_tests/overview.rst
@@ -215,7 +215,7 @@ TRex is installed and run on the TG compute node. The typical procedure is:
 - TRex is started in the background mode
   ::
 
-  $ sh -c 'cd /opt/trex-core-2.25/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /dev/null 2>&1 &' > /dev/null
+  $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log 2>&1 &' > /dev/null
 
 - There are traffic streams dynamically prepared for each test, based on traffic
   profiles. The traffic is sent and the statistics obtained using
diff --git a/docs/report/introduction/general_notes.rst b/docs/report/introduction/general_notes.rst
index 461e186f6d..5213a6ac42 100644
--- a/docs/report/introduction/general_notes.rst
+++ b/docs/report/introduction/general_notes.rst
@@ -31,18 +31,17 @@ is listed separately, as follows:
    side). Tested across a range of multi-thread and multi-core
    configurations. TRex is used as a traffic generator.
 
-#. **Container Topologies Orchestrated by K8s - Performance** - CSIT
-   |release| introduced new tests of Container topologies connected over
-   the memif virtual interface (shared memory interface). For these tests
-   VPP vswitch instance runs in a Docker Container handling Intel x520 NIC
-   10GbE interfaces and connecting over memif (Master side) virtual
-   interfaces to more instances of VPP running in Docker Containers with
-   memif virtual interfaces (Slave side). All containers are orchestrated
-   by Kubernetes, with Ligato for container networking. TRex is used as a
-   traffic generator.
+#. **Container Topologies Orchestrated by K8s - Performance** - CSIT Container
+   topologies connected over the memif virtual interface (shared memory
+   interface). For these tests VPP vswitch instance runs in a Docker Container
+   handling Intel x520 NIC 10GbE interfaces and connecting over memif (Master
+   side) virtual interfaces to more instances of VPP running in Docker
+   Containers with memif virtual interfaces (Slave side). All containers are
+   orchestrated by Kubernetes, with `Ligato <https://github.com/ligato>`_ for
+   container networking. TRex is used as a traffic generator.
 
 #. **DPDK Performance** - VPP is using DPDK code to control and drive
-   the NICs and physical interfaces. Testpmd tests are used as a baseline to
+   the NICs and physical interfaces. Tests are used as a baseline to
    profile the DPDK sub-system of VPP. DPDK performance tests executed in
    physical FD.io testbeds, focusing on Testpmd/L3FWD data plane performance for
    Phy-to-Phy (NIC-to-NIC). Tests cover a range of NICs, 10GE and 40GE
diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst
index 3ee4ff33fd..d029bd0e74 100644
--- a/docs/report/vpp_performance_tests/csit_release_notes.rst
+++ b/docs/report/vpp_performance_tests/csit_release_notes.rst
@@ -6,41 +6,40 @@ Changes in CSIT |release|
 

 #. Added VPP performance tests

 

-   - **L2BD MAC scale tests**

+   - **Container Topologies Orchestrated by K8s with VPP memif tests**

 

-     - VPP L2 Bridge-Domain with MAC learning and large size L2FIB (10k,

-       100k, 1M MACs), tested in NIC-to-NIC and VM vhost topologies.

+     - Added tests with VPP in L2 Cross-Connect and Bridge-Domain configurations

+       connecting over memif virtual interfaces VPPs running in Docker

+       containers, with service chain topologies orchestrated by Kubernetes.

+       Chained, horizontal and standalone linked topologies added;

 

-   - **Linux Container VPP memif tests**

+   - **VPP TCP/IP stack**

 

-     - Tests with VPP in L2 Bridge-Domain configuration connecting over

-       memif virtual interfaces to VPPs running in LXCs;

+     - Added tests with VPP builtin TCP based HTTP server. WRK traffic generator

+       is used.

 

-   - **Docker Container VPP memif tests**

+   - **SRv6 tests**

 

-     - Tests with VPP in L2 Cross-Connect configuration connecting over

-       memif virtual interfaces VPPs running in Docker containers;

+     - [placeholder]

 

-   - **Container Topologies Orchestrated by K8s with VPP memif tests**

+   - **IPSecSW tests**

 

-     - Tests with VPP in L2 Cross-Connect and Bridge-Domain configurations

-       connecting over memif virtual interfaces VPPs running in Docker

-       containers, with service chain topologies orchestrated by Kubernetes;

+     - SW computed IPSec encryption with AES-GCM, CBC-SHA1 ciphers, in

+       combination with IPv4 routed-forwarding.

 

-   - **Stateful Security Groups**

+#. Presentation and Analytics Layer

 

-     - m-thread m-core VPP stateful and stateless security-groups tests;

+     - Added multi-core scale-up analysis into Presentation and Analytics Layer

+       (PAL) for automated CSIT test results analysis;

 

-   - **MAC-IP binding**

 

-     - MACIP input access-lists, single-thread single-core and m-thread

-       m-core tests;

+#. Other improvements

 

-#. Presentation and Analytics Layer

+     - **Framework optimizations**

+

+       - Ability to run CSIT framework on ARM architecture.

 

-     - New Presentation and Analytics Layer (PAL) for automated CSIT test

-       results analysis and presentation, including statistical analysis

-       of results repeatibility and test report auto-generation;

+       - Overall stability improvements.

 

 Performance Improvements

 ------------------------

@@ -205,7 +204,7 @@ Here is the list of known issues in CSIT |release| for VPP performance tests:
 | 1 | Vic1385 and Vic1227 low performance.            | VPP-664    | Low NDR performance.                                            |

 |   |                                                 |            |                                                                 |

 +---+-------------------------------------------------+------------+-----------------------------------------------------------------+

-| 2 | Sporadic NDR discovery test failures on x520.   | CSIT-750   | Suspected issue with HW settings (BIOS, FW) in LF               |

+| 2 | Sporadic NDR discovery test failures on x520.   | CSIT-750   | Suspected issue with HW combination of X710-X520 in LF          |

 |   |                                                 |            | infrastructure. Issue can't be replicated outside LF.           |

 +---+-------------------------------------------------+------------+-----------------------------------------------------------------+

 | 3 | VPP in 2t2c setups - large variation            | CSIT-568   | Suspected NIC firmware or DPDK driver issue affecting NDR       |

diff --git a/docs/report/vpp_performance_tests/documentation/containers.rst b/docs/report/vpp_performance_tests/documentation/containers.rst
index d3eeb71b0b..a61738653a 100644
--- a/docs/report/vpp_performance_tests/documentation/containers.rst
+++ b/docs/report/vpp_performance_tests/documentation/containers.rst
@@ -140,11 +140,8 @@ a range of virtual networking topologies.
   of functionality is better supported in LXC 2.1 but can be done is current
   version as well.
 
-**Open Questions**
-
-- CSIT code is currently using cgroup to pin lxc data plane thread to
-  cpu cores after lxc container is created. In the future may find a
-  more universal way to do it.
+- CSIT code is currently using cgroup control the range of CPU cores the
+  container must run on. VPP thread pinning defined vpp startup.conf.
 
 Docker
 ~~~~~~
@@ -166,7 +163,6 @@ containerized applications used in CSIT performance tests.
   configuration file controls the range of CPU cores the Docker image
   must run on. VPP thread pinning defined vpp startup.conf.
 
-
 Kubernetes
 ~~~~~~~~~~
 
@@ -180,11 +176,6 @@ K8s pod definitions including compute resource allocation is provided in
 CSIT uses K8s and its infrastructure components like etcd to control all
 phases of container based virtualized network topologies.
 
-**Known Issues**
-
-- Unable to properly pin k8s pods and containers to cpu cores. This will be
-  addressed in Kubernetes 1.8+ in alpha testing.
-
 **Open Questions**
 
 - Clarify the functions provided by Contiv and Calico in Ligato system?
@@ -201,7 +192,7 @@ using goVPP [govpp]_ and vpp-agent [vpp-agent]_.
 **Open Questions**
 
 - Currently using a separate LF Jenkins job for building csit-centric
-  vpp_agent docker images vs. dockerhub/ligato ones.
+  prod_vpp_agent docker images vs. dockerhub/ligato ones.
 
 Implementation
 --------------
@@ -286,9 +277,6 @@ Current CSIT implementation is illustrated using UML Class diagram:
 
 Sequentional diagram that illustrates the creation of a single container.
 
-.. mk: what "RF KW" is meant below?
-.. mk: the flow sequence should adhere to the lifecycle events listed earlier in this doc.
-
 ::
 
  Legend:
@@ -415,7 +403,7 @@ Kubernetes is implemented as separate library ``KubernetesUtils.py``,
 with a class with the same name. This utility provides an API for L2
 Robot Keywords to control ``kubectl`` installed on each of DUTs. One
 time initialization script, ``resources/libraries/bash/k8s_setup.sh``
-does reset/init kubectl, applies Calico v2.4.1 and initializes the
+does reset/init kubectl, applies Calico v2.6.3 and initializes the
 ``csit`` namespace. CSIT namespace is required to not to interfere with
 existing setups and it further simplifies apply/get/delete
 Pod/ConfigMap operations on SUTs.
@@ -475,10 +463,12 @@ We created separate sets of Jenkins jobs, that will be executing following:
 
 1. Clone latest CSIT and Ligato repositaries.
 2. Pull specific version of ``dev_vpp_agent`` image from Dockerhub.
-3. Build ``prod_vpp_image`` Docker image from ``dev_vpp_agent`` image.
-4. Shrink image using ``docker/dev_vpp_agent/shrink.sh`` script.
-5. Transfer ``prod_vpp_agent_shrink`` image to DUTs.
-6. Execute subset of performance tests designed for Ligato testing.
+3. Extract VPP API (from ``.deb`` package) and copy into ``dev_vpp_agent``
+   image
+4. Rebuild vpp-agent and extract outside image.
+5. Build ``prod_vpp_image`` Docker image from ``dev_vpp_agent`` image.
+6. Transfer ``prod_vpp_agent`` image to DUTs.
+7. Execute subset of performance tests designed for Ligato testing.
 
 ::
 
@@ -491,7 +481,7 @@ We created separate sets of Jenkins jobs, that will be executing following:
  |               ligato/dev_vpp_agent            <------| Pull this image from
  +------------------------^----------------------+      | Dockerhub ligato/dev_vpp_agent:<version>
                           |
-                          | Extract agent.tar.gz from dev_vpp_agent
+                          | Rebuild and extract agent.tar.gz from dev_vpp_agent
  +------------------------+----------------------+
  |                 prod_vpp_agent                <------| Build by passing own
  +-----------------------------------------------+      | vpp.tar.gz (from nexus
@@ -505,10 +495,8 @@ Approximate size of vnf-agent docker images:
 ::
 
   REPOSITORY            TAG       IMAGE ID        CREATED        SIZE
-  dev_vpp_agent         latest    442771972e4a    8 hours ago    3.57 GB
-  dev_vpp_agent_shrink  latest    bd2e76980236    8 hours ago    1.68 GB
-  prod_vpp_agent        latest    e33a5551b504    2 days ago     404 MB
-  prod_vpp_agent_shrink latest    446b271cce26    2 days ago     257 MB
+  dev-vpp-agent         latest    78c53bd57e2     6 weeks ago    9.79GB
+  prod_vpp_agent        latest    f68af5afe601    5 weeks ago    443MB
 
 In CSIT we need to create separate performance suite under
 ``tests/kubernetes/perf`` which contains modified Suite setup in comparison
diff --git a/docs/report/vpp_performance_tests/overview.rst b/docs/report/vpp_performance_tests/overview.rst
index 8692b8bf7a..38e76d27b1 100644
--- a/docs/report/vpp_performance_tests/overview.rst
+++ b/docs/report/vpp_performance_tests/overview.rst
@@ -54,7 +54,7 @@ performance labs to address larger scale multi-interface and multi-NIC
 performance testing scenarios.
 
 For test cases that require DUT (VPP) to communicate with
-VirtualMachines (VMs) / Containers (Linux or Docker Containers) over
+VirtualMachines (VMs) / Linux or Docker Containers (Ctrs) over
 vhost-user/memif interfaces, N of VM/Ctr instances are created on SUT1
 and SUT2. For N=1 DUT forwards packets between vhost/memif and physical
 interfaces. For N>1 DUT a logical service chain forwarding topology is
@@ -175,10 +175,14 @@ CSIT |release| includes following performance test suites, listed per NIC type:
   - **VMs with vhost-user** - virtual topologies with 1 VM and service chains
     of 2 VMs using vhost-user interfaces, with VPP forwarding modes incl. L2
     Cross-Connect, L2 Bridge-Domain, VXLAN with L2BD, IPv4 routed-forwarding.
-  - **IPSec** - IPSec encryption with AES-GCM, CBC-SHA1 ciphers, in combination
-    with IPv4 routed-forwarding.
+  - **IPSecSW** - IPSec encryption with AES-GCM, CBC-SHA1 ciphers, in
+    combination with IPv4 routed-forwarding.
+  - **IPSecHW** - IPSec encryption with AES-GCM, CBC-SHA1 ciphers, in
+    combination with IPv4 routed-forwarding. Intel QAT HW acceleration.
   - **IPSec+LISP** - IPSec encryption with CBC-SHA1 ciphers, in combination
     with LISP-GPE overlay tunneling for IPv4-over-IPv4.
+  - **VPP TCP/IP stack** - VPP builtin TCP based HTTP server. WRK traffic
+    generator is used.
 
 - 2port10GE X710 Intel
 
@@ -399,7 +403,7 @@ TRex is installed and run on the TG compute node. The typical procedure is:
 - TRex is started in the background mode
   ::
 
-  $ sh -c 'cd /opt/trex-core-2.25/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /dev/null 2>&1 &' > /dev/null
+  $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log 2>&1 &' > /dev/null
 
 - There are traffic streams dynamically prepared for each test, based on traffic
   profiles. The traffic is sent and the statistics obtained using
diff --git a/docs/report/vpp_performance_tests/test_environment.rst b/docs/report/vpp_performance_tests/test_environment.rst
index 48d45e587b..509053059e 100644
--- a/docs/report/vpp_performance_tests/test_environment.rst
+++ b/docs/report/vpp_performance_tests/test_environment.rst
@@ -328,7 +328,9 @@ Below a subset of the running configuration:
     adduser: 3.113+nmu3ubuntu4

     apparmor: 2.10.95-0ubuntu2.6

     apt: 1.2.12~ubuntu16.04.1

+    apt-transport-https: 1.2.24

     apt-utils: 1.2.12~ubuntu16.04.1

+    aufs-tools: 1:3.2+20130722-1.1ubuntu1

     autoconf: 2.69-9

     automake: 1:1.15-4ubuntu1

     autotools-dev: 20150820.1

@@ -342,6 +344,8 @@ Below a subset of the running configuration:
     busybox-initramfs: 1:1.22.0-15ubuntu1

     busybox-static: 1:1.22.0-15ubuntu1

     bzip2: 1.0.6-8

+    busybox-static: 1:1.22.0-15ubuntu1

+    bzip2: 1.0.6-8

     ca-certificates: 20160104ubuntu1

     ca-certificates-java: 20160321

     cgroup-bin: 0.41-7ubuntu1

@@ -350,6 +354,7 @@ Below a subset of the running configuration:
     cloud-image-utils: 0.27-0ubuntu24

     console-setup: 1.108ubuntu15.2

     console-setup-linux: 1.108ubuntu15.2

+    corekeeper: 1.6

     coreutils: 8.25-2ubuntu2

     cpio: 2.11+dfsg-5ubuntu1

     cpp: 4:5.3.1-1ubuntu1

@@ -373,23 +378,30 @@ Below a subset of the running configuration:
     dmidecode: 3.0-2ubuntu0.1

     dns-root-data: 2015052300+h+1

     dnsmasq-base: 2.75-1ubuntu0.16.04.2

+    docker-ce: 17.09.0~ce-0~ubuntu

     dpkg: 1.18.4ubuntu1.1

     dpkg-dev: 1.18.4ubuntu1.1

     e2fslibs:amd64: 1.42.13-1ubuntu1

     e2fsprogs: 1.42.13-1ubuntu1

+    ebtables: 2.0.10.4-3.4ubuntu2

     eject: 2.1.5+deb1+cvs20081104-13.1

+    ethtool: 1:4.5-1

     expect: 5.45-7

     fakeroot: 1.20.2-1ubuntu1

     file: 1:5.25-2ubuntu1

     findutils: 4.6.0+git+20160126-2

+    fontconfig: 2.11.94-0ubuntu1.1

     fontconfig-config: 2.11.94-0ubuntu1.1

     fonts-dejavu-core: 2.35-1

+    fonts-dejavu-extra: 2.35-1

     g++: 4:5.3.1-1ubuntu1

     g++-5: 5.4.0-6ubuntu1~16.04.2

     gcc: 4:5.3.1-1ubuntu1

     gcc-5: 5.4.0-6ubuntu1~16.04.2

     gcc-5-base:amd64: 5.4.0-6ubuntu1~16.04.2

     gcc-6-base:amd64: 6.0.1-0ubuntu1

+    gdb: 7.11.1-0ubuntu1~16.5

+    gdbserver: 7.11.1-0ubuntu1~16.5

     genisoimage: 9:1.1.11-3ubuntu1

     gettext-base: 0.19.7-2ubuntu3

     gir1.2-glib-2.0:amd64: 1.46.0-3ubuntu1

@@ -404,6 +416,7 @@ Below a subset of the running configuration:
     grub-pc-bin: 2.02~beta2-36ubuntu3.1

     grub2-common: 2.02~beta2-36ubuntu3.1

     gzip: 1.6-4ubuntu1

+    hicolor-icon-theme: 0.15-0ubuntu1

     hostname: 3.16ubuntu2

     ifupdown: 0.8.10ubuntu1

     init: 1.29ubuntu2

@@ -428,6 +441,10 @@ Below a subset of the running configuration:
     klibc-utils: 2.0.4-8ubuntu1.16.04.1

     kmod: 22-1ubuntu4

     krb5-locales: 1.13.2+dfsg-5

+    kubeadm: 1.8.4-00

+    kubectl: 1.8.4-00

+    kubelet: 1.8.4-00

+    kubernetes-cni: 0.5.1-00

     language-selector-common: 0.165.3

     laptop-detect: 0.13.7ubuntu2

     less: 481-2.1

@@ -448,6 +465,8 @@ Below a subset of the running configuration:
     libasound2-data: 1.1.0-0ubuntu1

     libasprintf0v5:amd64: 0.19.7-2ubuntu3

     libasyncns0:amd64: 0.8-5build1

+    libatk1.0-0:amd64: 2.18.0-1

+    libatk1.0-data: 2.18.0-1

     libatm1:amd64: 1:2.5.1-1.5

     libatomic1:amd64: 5.4.0-6ubuntu1~16.04.2

     libattr1:amd64: 1:2.4.47-2

@@ -456,6 +475,8 @@ Below a subset of the running configuration:
     libavahi-client3:amd64: 0.6.32~rc+dfsg-1ubuntu2

     libavahi-common-data:amd64: 0.6.32~rc+dfsg-1ubuntu2

     libavahi-common3:amd64: 0.6.32~rc+dfsg-1ubuntu2

+    libbabeltrace-ctf1:amd64: 1.3.2-1

+    libbabeltrace1:amd64: 1.3.2-1

     libblkid1:amd64: 2.27.1-6ubuntu3.1

     libbluetooth3:amd64: 5.37-0ubuntu5

     libboost-iostreams1.58.0:amd64: 1.58.0+dfsg-5ubuntu3.1

@@ -466,11 +487,12 @@ Below a subset of the running configuration:
     libbsd0:amd64: 0.8.2-1

     libbz2-1.0:amd64: 1.0.6-8

     libc-bin: 2.23-0ubuntu3

-    libc-dev-bin: 2.23-0ubuntu3

-    libc6:amd64: 2.23-0ubuntu3

-    libc6-dev:amd64: 2.23-0ubuntu3

+    libc-dev-bin: 2.23-0ubuntu9

+    libc6-dbg:amd64: 2.23-0ubuntu9

+    libc6-dev:amd64: 2.23-0ubuntu9

     libcaca0:amd64: 0.99.beta19-2build2~gcc5.2

     libcacard0:amd64: 1:2.5.0-2

+    libcairo2:amd64: 1.14.6-1

     libcap-ng0:amd64: 0.7.7-1

     libcap2:amd64: 1:2.24-12

     libcap2-bin: 1:2.24-12

@@ -482,6 +504,7 @@ Below a subset of the running configuration:
     libcryptsetup4:amd64: 2:1.6.6-5ubuntu2

     libcups2:amd64: 2.1.3-4

     libcurl3-gnutls:amd64: 7.47.0-1ubuntu2.1

+    libdatrie1:amd64: 0.2.10-2

     libdb5.3:amd64: 5.3.28-11

     libdbus-1-3:amd64: 1.10.6-1ubuntu3

     libdbus-glib-1-2:amd64: 0.106-1

@@ -515,6 +538,9 @@ Below a subset of the running configuration:
     libgcc1:amd64: 1:6.0.1-0ubuntu1

     libgcrypt20:amd64: 1.6.5-2ubuntu0.2

     libgdbm3:amd64: 1.8.3-13.1

+    libgdk-pixbuf2.0-0:amd64: 2.32.2-1ubuntu1.2

+    libgdk-pixbuf2.0-common: 2.32.2-1ubuntu1.2

+    libgif7:amd64: 5.1.4-0.3~16.04

     libgirepository-1.0-1:amd64: 1.46.0-3ubuntu1

     libgl1-mesa-dri:amd64: 11.2.0-1ubuntu2.2

     libgl1-mesa-glx:amd64: 11.2.0-1ubuntu2.2

@@ -528,13 +554,19 @@ Below a subset of the running configuration:
     libgnutls30:amd64: 3.4.10-4ubuntu1.1

     libgomp1:amd64: 5.4.0-6ubuntu1~16.04.2

     libgpg-error0:amd64: 1.21-2ubuntu1

+    libgraphite2-3:amd64: 1.3.6-1ubuntu1

     libgssapi-krb5-2:amd64: 1.13.2+dfsg-5

     libgssapi3-heimdal:amd64: 1.7~git20150920+dfsg-4ubuntu1

+    libgtk2.0-0:amd64: 2.24.30-1ubuntu1.16.04.2

+    libgtk2.0-bin: 2.24.30-1ubuntu1.16.04.2

+    libgtk2.0-common: 2.24.30-1ubuntu1.16.04.2

+    libharfbuzz0b:amd64: 1.0.1-1ubuntu0.1

     libhcrypto4-heimdal:amd64: 1.7~git20150920+dfsg-4ubuntu1

     libheimbase1-heimdal:amd64: 1.7~git20150920+dfsg-4ubuntu1

     libheimntlm0-heimdal:amd64: 1.7~git20150920+dfsg-4ubuntu1

     libhogweed4:amd64: 3.2-1

     libhx509-5-heimdal:amd64: 1.7~git20150920+dfsg-4ubuntu1

+    libice-dev:amd64: 2:1.0.9-1

     libice6:amd64: 2:1.0.9-1

     libicu55:amd64: 55.1-7

     libidn11:amd64: 1.32-3ubuntu1.1

@@ -542,6 +574,7 @@ Below a subset of the running configuration:
     libiscsi2:amd64: 1.12.0-2

     libisl15:amd64: 0.16.1-1

     libitm1:amd64: 5.4.0-6ubuntu1~16.04.2

+    libjbig0:amd64: 2.1-3.1

     libjpeg-turbo8:amd64: 1.4.2-0ubuntu3

     libjpeg8:amd64: 8c-2ubuntu8

     libjson-c2:amd64: 0.11-4ubuntu2

@@ -582,6 +615,7 @@ Below a subset of the running configuration:
     libnspr4:amd64: 2:4.12-0ubuntu0.16.04.1

     libnss3:amd64: 2:3.23-0ubuntu0.16.04.1

     libnss3-nssdb: 2:3.23-0ubuntu0.16.04.1

+    libnuma-dev:amd64: 2.0.11-1ubuntu1

     libnuma1:amd64: 2.0.11-1ubuntu1

     libogg0:amd64: 1.3.2-1

     libopus0:amd64: 1.1.2-1ubuntu1

@@ -591,6 +625,9 @@ Below a subset of the running configuration:
     libpam-modules-bin: 1.1.8-3.2ubuntu2

     libpam-runtime: 1.1.8-3.2ubuntu2

     libpam0g:amd64: 1.1.8-3.2ubuntu2

+    libpango-1.0-0:amd64: 1.38.1-1

+    libpangocairo-1.0-0:amd64: 1.38.1-1

+    libpangoft2-1.0-0:amd64: 1.38.1-1

     libpcap-dev: 1.7.4-2

     libpcap0.8:amd64: 1.7.4-2

     libpcap0.8-dev: 1.7.4-2

@@ -609,6 +646,7 @@ Below a subset of the running configuration:
     libpolkit-gobject-1-0:amd64: 0.105-14.1

     libpopt0:amd64: 1.16-10

     libprocps4:amd64: 2:3.3.10-4ubuntu2

+    libpthread-stubs0-dev:amd64: 0.3-4

     libpulse0:amd64: 1:8.0-0ubuntu3

     libpython-all-dev:amd64: 2.7.11-1

     libpython-dev:amd64: 2.7.11-1

@@ -618,8 +656,9 @@ Below a subset of the running configuration:
     libpython2.7-minimal:amd64: 2.7.12-1~16.04

     libpython2.7-stdlib:amd64: 2.7.12-1~16.04

     libpython3-stdlib:amd64: 3.5.1-3

-    libpython3.5-minimal:amd64: 3.5.2-2~16.01

-    libpython3.5-stdlib:amd64: 3.5.2-2~16.01

+    libpython3.5:amd64: 3.5.2-2ubuntu0~16.04.1

+    libpython3.5-minimal:amd64: 3.5.2-2ubuntu0~16.04.1

+    libpython3.5-stdlib:amd64: 3.5.2-2ubuntu0~16.04.1

     libquadmath0:amd64: 5.4.0-6ubuntu1~16.04.2

     librados2: 10.2.2-0ubuntu0.16.04.2

     librbd1: 10.2.2-0ubuntu0.16.04.2

@@ -637,6 +676,7 @@ Below a subset of the running configuration:
     libsepol1:amd64: 2.4-2

     libsigsegv2:amd64: 2.10-4

     libslang2:amd64: 2.3.0-2ubuntu1

+    libsm-dev:amd64: 2:1.2.2-1

     libsm6:amd64: 2:1.2.2-1

     libsmartcols1:amd64: 2.27.1-6ubuntu3.1

     libsndfile1:amd64: 1.0.25-10

@@ -652,6 +692,9 @@ Below a subset of the running configuration:
     libtext-charwidth-perl: 0.04-7build5

     libtext-iconv-perl: 1.7-5build4

     libtext-wrapi18n-perl: 0.06-7.1

+    libthai-data: 0.1.24-2

+    libthai0:amd64: 0.1.24-2

+    libtiff5:amd64: 4.0.6-1ubuntu0.2

     libtinfo5:amd64: 6.0+20160213-1ubuntu1

     libtk8.6:amd64: 8.6.5-1

     libtool: 2.4.6-0.1

@@ -671,21 +714,29 @@ Below a subset of the running configuration:
     libwrap0:amd64: 7.6.q-25

     libx11-6:amd64: 2:1.6.3-1ubuntu2

     libx11-data: 2:1.6.3-1ubuntu2

+    libx11-dev:amd64: 2:1.6.3-1ubuntu2

+    libx11-doc: 2:1.6.3-1ubuntu2

     libx11-xcb1:amd64: 2:1.6.3-1ubuntu2

+    libxau-dev:amd64: 1:1.0.8-1

     libxau6:amd64: 1:1.0.8-1

     libxaw7:amd64: 2:1.0.13-1

     libxcb-dri2-0:amd64: 1.11.1-1ubuntu1

     libxcb-dri3-0:amd64: 1.11.1-1ubuntu1

     libxcb-glx0:amd64: 1.11.1-1ubuntu1

     libxcb-present0:amd64: 1.11.1-1ubuntu1

+    libxcb-render0:amd64: 1.11.1-1ubuntu1

     libxcb-shape0:amd64: 1.11.1-1ubuntu1

+    libxcb-shm0:amd64: 1.11.1-1ubuntu1

     libxcb-sync1:amd64: 1.11.1-1ubuntu1

     libxcb1:amd64: 1.11.1-1ubuntu1

+    libxcb1-dev:amd64: 1.11.1-1ubuntu1

     libxcomposite1:amd64: 1:0.4.4-1

+    libxcursor1:amd64: 1:1.1.14-1

     libxdamage1:amd64: 1:1.1.4-2

+    libxdmcp-dev:amd64: 1:1.1.2-1.1

     libxdmcp6:amd64: 1:1.1.2-1.1

-    libxen-4.6:amd64: 4.6.0-1ubuntu4.2

-    libxenstore3.0:amd64: 4.6.0-1ubuntu4.2

+    libxen-4.6:amd64: 4.6.0-1ubuntu4.1

+    libxenstore3.0:amd64: 4.6.0-1ubuntu4.1

     libxext6:amd64: 2:1.3.3-1

     libxfixes3:amd64: 1:5.0.1-2

     libxft2:amd64: 2.3.2-1

@@ -699,6 +750,7 @@ Below a subset of the running configuration:
     libxrender1:amd64: 1:0.9.9-0ubuntu1

     libxshmfence1:amd64: 1.2-1

     libxss1:amd64: 1:1.2.2-1

+    libxt-dev:amd64: 1:1.1.5-0ubuntu1

     libxt6:amd64: 1:1.1.5-0ubuntu1

     libxtables11:amd64: 1.6.0-2ubuntu3

     libxtst6:amd64: 2:1.2.2-1

@@ -743,7 +795,10 @@ Below a subset of the running configuration:
     net-tools: 1.60-26ubuntu1

     netbase: 5.3

     netcat-openbsd: 1.105-7ubuntu1

-    openjdk-8-jre-headless:amd64: 8u131-b11-0ubuntu1.16.04.2

+    openjdk-8-jdk:amd64: 8u131-b11-2ubuntu1.16.04.3

+    openjdk-8-jdk-headless:amd64: 8u131-b11-2ubuntu1.16.04.3

+    openjdk-8-jre:amd64: 8u131-b11-2ubuntu1.16.04.3

+    openjdk-8-jre-headless:amd64: 8u131-b11-2ubuntu1.16.04.3

     openssh-client: 1:7.2p2-4ubuntu2.1

     openssh-server: 1:7.2p2-4ubuntu2.1

     openssh-sftp-server: 1:7.2p2-4ubuntu2.1

@@ -789,8 +844,8 @@ Below a subset of the running configuration:
     python3-six: 1.10.0-3

     python3-urllib3: 1.13.1-2ubuntu0.16.04.1

     python3-virtualenv: 15.0.1+ds-3

-    python3.5: 3.5.2-2~16.01

-    python3.5-minimal: 3.5.2-2~16.01

+    python3.5: 3.5.2-2ubuntu0~16.04.1

+    python3.5-minimal: 3.5.2-2ubuntu0~16.04.1

     qemu-block-extra:amd64: 1:2.5+dfsg-5ubuntu10.5

     qemu-system-common: 1:2.5+dfsg-5ubuntu10.5

     qemu-system-x86: 1:2.5+dfsg-5ubuntu10.5

@@ -820,8 +875,9 @@ Below a subset of the running configuration:
     tcl-expect:amd64: 5.45-7

     tcl8.6: 8.6.5+dfsg-2

     tcpd: 7.6.q-25

+    telnet: 0.17-40

     tk8.6: 8.6.5-1

-    tzdata: 2016g-0ubuntu0.16.04

+    tzdata: 2016f-0ubuntu0.16.04

     ubuntu-keyring: 2012.05.19

     ubuntu-minimal: 1.361

     ucf: 3.0036

@@ -834,24 +890,23 @@ Below a subset of the running configuration:
     vim-common: 2:7.4.1689-3ubuntu1.1

     vim-tiny: 2:7.4.1689-3ubuntu1.1

     virtualenv: 15.0.1+ds-3

-    vpp: 17.10-rc0~89-g7c35f19~b2621

-    vpp-dbg: 17.10-rc0~89-g7c35f19~b2621

-    vpp-dev: 17.10-rc0~89-g7c35f19~b2621

-    vpp-dpdk-dkms: 17.05-vpp6

-    vpp-lib: 17.10-rc0~89-g7c35f19~b2621

-    vpp-plugins: 17.10-rc0~89-g7c35f19~b2621

     wamerican: 7.1-1

     wget: 1.17.1-1ubuntu1.1

     whiptail: 0.52.18-1ubuntu2

     wireless-regdb: 2015.07.20-1ubuntu1

     x11-common: 1:7.7+13ubuntu3

     x11-utils: 7.7+3

+    x11proto-core-dev: 7.0.31-1~ubuntu16.04.1

+    x11proto-input-dev: 2.3.1-1

+    x11proto-kb-dev: 1.0.7-0ubuntu1

     xauth: 1:1.0.9-1ubuntu2

     xbitmaps: 1.1.1-2

     xdg-user-dirs: 0.15-2ubuntu6

     xkb-data: 2.16-1ubuntu1

     xml-core: 0.13+nmu2

+    xorg-sgml-doctools: 1:1.11-1

     xterm: 322-1ubuntu1

+    xtrans-dev: 1.3.5-1

     xz-utils: 5.1.1alpha+20120614-2ubuntu2

     zlib1g:amd64: 1:1.2.8.dfsg-2ubuntu4

     zlib1g-dev:amd64: 1:1.2.8.dfsg-2ubuntu4

@@ -1907,6 +1962,8 @@ Below a subset of the running configuration:
      [ + ]  cpufrequtils

      [ + ]  cron

      [ + ]  dbus

+     [ + ]  docker

+     [ + ]  ebtables

      [ + ]  grub-common

      [ - ]  hostname.sh

      [ - ]  hwclock.sh

@@ -1927,7 +1984,7 @@ Below a subset of the running configuration:
      [ - ]  plymouth-log

      [ + ]  procps

      [ + ]  qemu-kvm

-     [ + ]  rc.local

+     [ - ]  rc.local

      [ + ]  resolvconf

      [ - ]  rsync

      [ + ]  rsyslog

@@ -1939,7 +1996,7 @@ Below a subset of the running configuration:
      [ - ]  umountnfs.sh

      [ - ]  umountroot

      [ + ]  urandom

-     [ + ]  uuidd

+     [ - ]  uuidd

      [ - ]  x11-common

 

 **Host CFS optimizations (QEMU+VPP)**

@@ -2037,31 +2094,37 @@ Tagged by **1T1C**
 

     unix

     {

-        cli-listen localhost:5002

-        log /tmp/vpe.log

-        nodaemon

+      cli-listen localhost:5002

+      log /tmp/vpe.log

+      nodaemon

     }

     cpu

     {

-        corelist-workers 2

-        main-core 1

+      corelist-workers 2

+      main-core 1

+    }

+    ip4

+    {

+      heap-size "4G"

     }

     ip6

     {

-        heap-size 3G

-        hash-buckets 2000000

+      heap-size "4G"

+      hash-buckets "2000000"

     }

-    heapsize 3G

+    heapsize "4G"

     dpdk

     {

-        dev default

-        {

-            num-rx-queues 1

-        }

-        dev 0000:0a:00.0

-        dev 0000:0a:00.1

-        socket-mem 1024,1024

-        no-multi-seg

+      dev 0000:88:00.1

+      dev 0000:88:00.0

+      no-multi-seg

+      dev default

+      {

+        num-rx-desc 2048

+        num-rx-queues 1

+        num-tx-desc 2048

+      }

+      socket-mem "1024,1024

     }

 

 Tagged by **2T1C**

@@ -2070,31 +2133,37 @@ Tagged by **2T1C**
 

     unix

     {

-        cli-listen localhost:5002

-        log /tmp/vpe.log

-        nodaemon

+      cli-listen localhost:5002

+      log /tmp/vpe.log

+      nodaemon

     }

     cpu

     {

-        corelist-workers 2,3

-        main-core 1

+      corelist-workers 2,3

+      main-core 1

+    }

+    ip4

+    {

+      heap-size "4G"

     }

     ip6

     {

-        heap-size 3G

-        hash-buckets 2000000

+      heap-size "4G"

+      hash-buckets "2000000"

     }

-    heapsize 3G

+    heapsize "4G"

     dpdk

     {

-        dev default

-        {

-            num-rx-queues 1

-        }

-        dev 0000:0a:00.0

-        dev 0000:0a:00.1

-        socket-mem 1024,1024

-        no-multi-seg

+      dev 0000:88:00.1

+      dev 0000:88:00.0

+      no-multi-seg

+      dev default

+      {

+        num-rx-desc 2048

+        num-rx-queues 1

+        num-tx-desc 2048

+      }

+      socket-mem "1024,1024

     }

 

 Tagged by **4T4C**

@@ -2103,31 +2172,37 @@ Tagged by **4T4C**
 

     unix

     {

-        cli-listen localhost:5002

-        log /tmp/vpe.log

-        nodaemon

+      cli-listen localhost:5002

+      log /tmp/vpe.log

+      nodaemon

     }

     cpu

     {

-        corelist-workers 2,3,4,5

-        main-core 1

+      corelist-workers 2,3,4,5

+      main-core 1

+    }

+    ip4

+    {

+      heap-size "4G"

     }

     ip6

     {

-        heap-size 3G

-        hash-buckets 2000000

+      heap-size "4G"

+      hash-buckets "2000000"

     }

-    heapsize 3G

+    heapsize "4G"

     dpdk

     {

-        dev default

-        {

-            num-rx-queues 2

-        }

-        dev 0000:0a:00.0

-        dev 0000:0a:00.1

-        socket-mem 1024,1024

-        no-multi-seg

+      dev 0000:88:00.1

+      dev 0000:88:00.0

+      no-multi-seg

+      dev default

+      {

+        num-rx-desc 2048

+        num-rx-queues 2

+        num-tx-desc 2048

+      }

+      socket-mem "1024,1024

     }

 

 

@@ -2164,7 +2239,7 @@ DPDK v17.11
 

 ::

 

-    $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /dev/null 2>&1 &'> /dev/null

+    $ sh -c 'cd <t-rex-install-dir>/scripts/ && sudo nohup ./t-rex-64 -i -c 7 --iom 0 > /tmp/trex.log 2>&1 &'> /dev/null

 

 **TG common API - pointer to driver**