Update static report content - Honeycomb

Change-Id: I9f6612a4495df62f3a43c19457864a4eeff64a3d
Signed-off-by: selias <samelias@cisco.com>

5 files changed, 25 insertions, 103 deletions

diff --git a/docs/report/honeycomb_functional_tests/csit_release_notes.rst b/docs/report/honeycomb_functional_tests/csit_release_notes.rst
index 38ec001418..7509ca5dd2 100644
--- a/docs/report/honeycomb_functional_tests/csit_release_notes.rst
+++ b/docs/report/honeycomb_functional_tests/csit_release_notes.rst
@@ -4,15 +4,15 @@ CSIT Release Notes
 Changes in CSIT |release|

 -------------------------

 

-#. Added Honeycomb functional tests for the following features:

+#. Added Honeycomb functional tests for the following areas:

 

-   - Policer

+   - LISP GPE

+   - Honeycomb northbound interfaces over IPv6

+   - Honeycomb implementation of ODL BGP

 

 #. Improved test coverage for the following features:

 

-   - Interface Management

-   - Vlan

-   - Port Mirroring

+   - Vlan sub-interfaces

 

 Known Issues

 ------------

@@ -27,17 +27,7 @@ tests in VIRL:
 |   |                                            |            | VPP refuses the configuration but returns code 200:OK. This can cause      |

 |   |                                            |            | desync between Honeycomb's config and operational data.                    |

 +---+--------------------------------------------+------------+----------------------------------------------------------------------------+

-| 2 | Removal of ACP-plugin interface assignment | HC2VPP-173 | Attempting to remove all ACLs from an interface responds with OK but does  |

-|   |                                            |            | not remove the assignments.                                                |

+| 2 | VxLAN GPE configuration crashes VPP        | VPP-875    | Specific VxLAN GPE configurations cause VPP to crash and restart.          |

 +---+--------------------------------------------+------------+----------------------------------------------------------------------------+

-| 3 | VxLAN GPE configuration crashes VPP        | VPP-875    | Specific VxLAN GPE configurations cause VPP to crash and restart.          |

-+---+--------------------------------------------+------------+----------------------------------------------------------------------------+

-| 4 | Policer traffic test failure               | CSIT-      | Traffic test has begun to fail, likely due to VPP changes. There is  more  |

-|   |                                            |            | information available yet.                                                 |

-+---+--------------------------------------------+------------+----------------------------------------------------------------------------+

-| 5 | SPAN traffic test failure                  | CSIT-      | Traffic test has begun to fail, likely due to VPP changes. There is  more  |

-|   |                                            |            | information available yet.                                                 |

-+---+--------------------------------------------+------------+----------------------------------------------------------------------------+

-| 6 | Unnumbered interface VIRL issue            | CSIT-      | CRUD for unnumbered interface appears to fail in VIRL, but not in local    |

-|   |                                            |            | test runs. Investigation pending.                                          |

+| 3 | Operational data for IPv6 special routes   | HC2VPP-228 | Special hop routes are misidentified as regular routes in operational data.|

 +---+--------------------------------------------+------------+----------------------------------------------------------------------------+

diff --git a/docs/report/honeycomb_functional_tests/overview.rst b/docs/report/honeycomb_functional_tests/overview.rst
index a0491b17ed..493499aea5 100644
--- a/docs/report/honeycomb_functional_tests/overview.rst
+++ b/docs/report/honeycomb_functional_tests/overview.rst
@@ -105,7 +105,12 @@ with results listed in this report:
   - Configure and delete Lisp mapping as local and remote.
   - Configure and delete Lisp adjacency mapping
   - Configure and delete Lisp map resolver, proxy ITR.
-  - Test case count: 16
+  - Test case count: 18
+- **LISP GPE** - CRUD for LISP GPE mappings.
+  - Toggle Lisp GPE feature status.
+  - Configure Lisp GPE mappings.
+  - Traffic test verifying encapsulation.
+  - Test case count: 12
 - **NAT** - CRD for NAT entries, interface assignment.
   - Configure and delete up to two NAT entries.
   - Assign NAT entries to a physical interface.
@@ -146,11 +151,16 @@ with results listed in this report:
   - Configure Policing rules.
   - Assign to interface.
   - Test case count: 6
+- **Border Gateway Protocol** - CRUD and functional tests for BGP.
+  - Configure peers and routes
+  - Check interactions with another BGP peer.
+  - Test case count: 9
 - **Honeycomb Infractructure** - configuration persistence,
   - Netconf notifications for interface events,
   - Netconf negative tests aimed at specific issues
+  - Netconf/Restconf northbound over IPv6
 
-Total 173 Honeycomb functional tests in the CSIT |release|.
+Total 217 Honeycomb functional tests in the CSIT |release|.
 
 Operational data in Honeycomb should mirror configuration data at all times.
 Because of this, test cases follow this general pattern:
diff --git a/docs/report/honeycomb_functional_tests/test_environment.rst b/docs/report/honeycomb_functional_tests/test_environment.rst
index b55bfad602..7982a085a1 100644
--- a/docs/report/honeycomb_functional_tests/test_environment.rst
+++ b/docs/report/honeycomb_functional_tests/test_environment.rst
@@ -7,10 +7,10 @@ each host being a Cisco UCS C240-M4 (2x Intel(R) Xeon(R) CPU E5-2699 v3 @
 2.30GHz, 18c, 512GB RAM) running Ubuntu 14.04.3 and the following VIRL software

 versions:

 

-  STD server version 0.10.24.7

-  UWM server version 0.10.24.7

+  - STD server version 0.10.32.16

+  - UWM server version 0.10.32.16

 

-Current VPP tests have been executed on a single VM operating system and

+Current Honeycomb tests have been executed on a single VM operating system and

 version only, as described in the following paragraphs.

 

 In CSIT terminology, the VM operating system for both DUTs and TG that

diff --git a/docs/report/honeycomb_performance_tests/csit_release_notes.rst b/docs/report/honeycomb_performance_tests/csit_release_notes.rst
index c9a0444597..d79907d4ca 100644
--- a/docs/report/honeycomb_performance_tests/csit_release_notes.rst
+++ b/docs/report/honeycomb_performance_tests/csit_release_notes.rst
@@ -4,7 +4,7 @@ CSIT Release Notes
 Changes in CSIT |release|

 -------------------------

 

-#. First release with Honeycomb performance testing.

+#. No changes since previous release.

 

 Known Issues

 ------------

diff --git a/docs/report/honeycomb_performance_tests/test_result_data.rst b/docs/report/honeycomb_performance_tests/test_result_data.rst
index 2e365369d8..9e791d6e88 100644
--- a/docs/report/honeycomb_performance_tests/test_result_data.rst
+++ b/docs/report/honeycomb_performance_tests/test_result_data.rst
@@ -15,83 +15,5 @@ read operation targets.
 Honeycomb + Netconf
 ===================
 
-Performs read operations from Honeycomb's operational data store. Honeycomb
-does not contact VPP to obtain the most up-to-date value. Operations are
-performed synchronously per client, varying the number of clients from 1 to 16.
-
-netconf-netty-threads: 16
-
-+----------------+----------------------------------+----------------+
-| # clients      | TCP performance (reads/sec)      | Total requests |
-+================+==================================+================+
-| 1              | 5179                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 2              | 10601                            | 100K           |
-+----------------+----------------------------------+----------------+
-| 4              | 21488                            | 100K           |
-+----------------+----------------------------------+----------------+
-| 8              | 35772                            | 100K           |
-+----------------+----------------------------------+----------------+
-| 16             | 73544                            | 100K           |
-+----------------+----------------------------------+----------------+
-
-netconf-netty-threads: 1
-
-+----------------+----------------------------------+----------------+
-| # clients      | TCP performance (reads/sec)      | Total requests |
-+================+==================================+================+
-| 1              | 5179                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 2              | 5557                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 4              | 5888                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 8              | 5977                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 16             | 6119                             | 100K           |
-+----------------+----------------------------------+----------------+
-
-Data source:
-https://jenkins.fd.io/view/hc2vpp/job/hc2vpp-csit-perf-master-ubuntu1604/8/
-
-Honeycomb + Netconf + VPP
-=========================
-
-Performs read operations from Honeycomb's operational data store. Honeycomb
-uses VPP API to obtain the value from VPP before responding. Operations are
-performed synchronously per client, varying the number of clients from 1 to 16.
-
-netconf-netty-threads: 16
-
-+----------------+----------------------------------+----------------+
-| # clients      | TCP performance (reads/sec)      | Total requests |
-+================+==================================+================+
-| 1              | 4766                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 2              | 9906                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 4              | 17594                            | 100K           |
-+----------------+----------------------------------+----------------+
-| 8              | 29933                            | 100K           |
-+----------------+----------------------------------+----------------+
-| 16             | 45254                            | 100K           |
-+----------------+----------------------------------+----------------+
-
-netconf-netty-threads: 1
-
-+----------------+----------------------------------+----------------+
-| # clients      | TCP performance (reads/sec)      | Total requests |
-+================+==================================+================+
-| 1              | 4600                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 2              | 5375                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 4              | 5404                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 8              | 5488                             | 100K           |
-+----------------+----------------------------------+----------------+
-| 16             | 6000                             | 100K           |
-+----------------+----------------------------------+----------------+
-
-Data source:
-https://jenkins.fd.io/view/hc2vpp/job/hc2vpp-csit-perf-master-ubuntu1604/9/
\ No newline at end of file
+No new data has been generated in the course of this release. Results from
+the last successful run are available in `17.07 release report <https://docs.fd.io/csit/rls1707/report/honeycomb_performance_tests/test_result_data.html>`_.
\ No newline at end of file