HONEYCOMB: Remove

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I60d80564050cb786c7b1e0a08f31f8292f82197e

9 files changed, 0 insertions, 337 deletions

diff --git a/docs/honeycomb_url_files.rst b/docs/honeycomb_url_files.rst
deleted file mode 100644
index 4dfa10c516..0000000000
--- a/docs/honeycomb_url_files.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-Documentation to files used to store URLs to resources in Honeycomb.
-====================================================================
-
-A URL file is a text file encoded in utf-8 with a path to a resource in
-Honeycomb. There is only one line in each file.
-
-The URL is stored without host and port with leading slash. There is no slash at
-the end, e.g.:
-    /restconf/config/v3po:vpp/bridge-domains
diff --git a/docs/report/detailed_test_results/honeycomb_functional_results/index.rst b/docs/report/detailed_test_results/honeycomb_functional_results/index.rst
deleted file mode 100644
index ea31695619..0000000000
--- a/docs/report/detailed_test_results/honeycomb_functional_results/index.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-HoneyComb Functional
-====================
-
-.. note::
-
-    Data sources for reported test results: i) `FD.io test executor Honeycomb
-    functional jobs`_, ii) archived FD.io jobs test result `output files
-    <../../_static/archive/>`_.
-
-.. toctree::
-
-    honeycomb_functional_results
-
diff --git a/docs/report/honeycomb_functional_tests/csit_release_notes.rst b/docs/report/honeycomb_functional_tests/csit_release_notes.rst
deleted file mode 100644
index ec0bb75b31..0000000000
--- a/docs/report/honeycomb_functional_tests/csit_release_notes.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-Release Notes
-=============
-
-Changes in |csit-release|
--------------------------
-
-No changes.
-
-Known Issues
-------------
-
-Here is the list of known issues in |csit-release| for Honeycomb functional
-tests in VIRL:
-
-+---+----------------------------------------------+--------------------------------------------------------------------------------------------------------+
-| # | JiraID                                       | Issue Description                                                                                      |
-+===+==============================================+========================================================================================================+
-| 1 | `HC2VPP-263                                  | LISP PITR feature configuration.                                                                       |
-|   | <https://jira.fd.io/browse/HC2VPP-263>`_     | Locator set reference in operational data is incorrect.                                                |
-+---+----------------------------------------------+--------------------------------------------------------------------------------------------------------+
-| 2 | `CSIT-1210                                   | Unnumbered interface configuration.                                                                    |
-|   | <https://jira.fd.io/browse/CSIT-1210>`_      | VPP does not send IP addresses for unnumbered interfaces anymore. HC CSIT tests were relying on that.  |
-+---+----------------------------------------------+--------------------------------------------------------------------------------------------------------+
diff --git a/docs/report/honeycomb_functional_tests/documentation.rst b/docs/report/honeycomb_functional_tests/documentation.rst
deleted file mode 100644
index 354c4062f6..0000000000
--- a/docs/report/honeycomb_functional_tests/documentation.rst
+++ /dev/null
@@ -1,5 +0,0 @@
-Documentation
-=============
-
-`CSIT Honeycomb Functional Tests Documentation`_ contains detailed
-functional description and input parameters for each test case.
diff --git a/docs/report/honeycomb_functional_tests/index.rst b/docs/report/honeycomb_functional_tests/index.rst
deleted file mode 100644
index ba0b8a0c19..0000000000
--- a/docs/report/honeycomb_functional_tests/index.rst
+++ /dev/null
@@ -1,9 +0,0 @@
-HoneyComb Functional
-====================
-
-.. toctree::
-
-    overview
-    csit_release_notes
-    test_environment
-    documentation
diff --git a/docs/report/honeycomb_functional_tests/overview.rst b/docs/report/honeycomb_functional_tests/overview.rst
deleted file mode 100644
index 2332169729..0000000000
--- a/docs/report/honeycomb_functional_tests/overview.rst
+++ /dev/null
@@ -1,237 +0,0 @@
-Overview
-========
-
-Virtual Topologies
-------------------
-
-CSIT HoneyComb functional tests are executed in VM-based virtual topologies
-created on demand using :abbr:`VIRL (Virtual Internet Routing Lab)`
-simulation platform contributed by Cisco. VIRL runs on physical
-baremetal servers hosted by LF FD.io project.
-
-All tests are executed in two-node virtual test topology shown in the
-figure below.
-
-.. only:: latex
-
-    .. raw:: latex
-
-        \begin{figure}[H]
-            \centering
-                \graphicspath{{../_tmp/src/vpp_functional_tests/}}
-                \includegraphics[width=0.90\textwidth]{virtual-2n-nic2nic}
-                \label{fig:virtual-2n-nic2nic}
-        \end{figure}
-
-.. only:: html
-
-    .. figure:: ../vpp_functional_tests/virtual-2n-nic2nic.svg
-        :alt: virtual-2n-nic2nic
-        :align: center
-
-SUT (System Under Test) is a VM running Ubuntu Linux (or Centos,
-depending on the test suite), TG (Traffic Generator) is another VM
-running Ubuntu Linux. SUT VMs run HoneyComb management agent and VPP in
-Linux user-mode as a combined DUT (Device Under Test). TG runs Scapy
-application as a packet Traffic Generator. Virtual connectivity between
-SUT and TG is provided using virtual NICs using VMs' virtio drivers.
-
-Functional Tests Coverage
--------------------------
-
-|csit-release| includes following HoneyComb functionality tested in
-virtual VM environment:
-
-+-----------------------+----------------------------------------------+
-| Functionality         |  Description                                 |
-+=======================+==============================================+
-| ACL                   | - CRD for low-level classifiers: table and   |
-|                       |   session management, interface assignment.  |
-|                       | - Configure up to 2 classify tables.         |
-|                       | - Configure up to 2 classify sessions on one |
-|                       |   table.                                     |
-|                       | - Assign classify session to a physical      |
-|                       |   interface.                                 |
-|                       | - Remove tables, sessions, interface         |
-|                       |   assignments.                               |
-|                       | - Test case count: 9.                        |
-+-----------------------+----------------------------------------------+
-| ACL-PLUGIN            | - CRD for high-level classifier.             |
-|                       | - MAC + IP address classification.           |
-|                       | - IPv4, IPv6 address classification.         |
-|                       | - TCP, UDP, ICMP, ICMPv6 protocol and        |
-|                       |   next-header classification.                |
-|                       | - port number classification.                |
-|                       | - ICMP, ICMPv6 code and type classification. |
-|                       | - Test case count: 15.                       |
-+-----------------------+----------------------------------------------+
-| Basic interface       | - CRUD for interface state.                  |
-| management            | - ipv4/ipv6 address, ipv4 neighbor, MTU      |
-|                       |   value.                                     |
-|                       | - Test case count: 14.                       |
-+-----------------------+----------------------------------------------+
-| Border Gateway        | - CRUD and functional tests for BGP.         |
-| Protocol              | - Configure peers and routes                 |
-|                       | - Check interactions with another BGP peer.  |
-|                       | - Test case count: 13.                       |
-+-----------------------+----------------------------------------------+
-| DHCP Relay            | - CRD for DHCP relay feature.                |
-|                       | - Configure DHCP Relays.                     |
-|                       | - IPv4 and IPv6 variants.                    |
-|                       | - Test case count: 4.                        |
-+-----------------------+----------------------------------------------+
-| Honeycomb             | - Configuration persistence.                 |
-| Infractructure        | - Netconf notifications for interface        |
-|                       |   events.                                    |
-|                       | - Netconf negative tests aimed at specific   |
-|                       |   issues.                                    |
-|                       | - Netconf/Restconf northbound over IPv6.     |
-|                       | - Test case count: 14.                       |
-+-----------------------+----------------------------------------------+
-| L2BD                  | - CRUD for L2 Bridge-Domain, interface       |
-|                       |   assignment.                                |
-|                       | - Create up to two bridge domains with all   |
-|                       |   implemented functions turned on:           |
-|                       |   flooding, unknown-unicast flooding,        |
-|                       |   forwarding, learning, arp-termination.     |
-|                       | - Assign up to two physical interfaces to a  |
-|                       |   single bridge domain.                      |
-|                       | - Remove interface assignments, remove       |
-|                       |   bridge domains.                            |
-|                       | - Test case count: 5.                        |
-+-----------------------+----------------------------------------------+
-| L2FIB                 | - CRD for L2-FIB entries.                    |
-|                       | - Create 4 FIB entries:                      |
-|                       |   one of each for filter/forward,            |
-|                       |   static/dynamic combinations.               |
-|                       | - Remove FIB entries.                        |
-|                       | - Test case count: 7.                        |
-+-----------------------+----------------------------------------------+
-| LISP                  | - CRD for Lisp: mapping, locator set,        |
-|                       |   adjacency, mapresolver.                    |
-|                       | - Toggle Lisp feature status.                |
-|                       | - Configure and delete Lisp mapping as local |
-|                       |   and remote.                                |
-|                       | - Configure and delete Lisp adjacency        |
-|                       |   mapping.                                   |
-|                       | - Configure and delete Lisp map resolver,    |
-|                       |   proxy ITR.                                 |
-|                       | - Test case count: 18.                       |
-+-----------------------+----------------------------------------------+
-| LISP GPE              | - CRUD for LISP GPE mappings.                |
-|                       | - Toggle Lisp GPE feature status.            |
-|                       | - Configure Lisp GPE mappings.               |
-|                       | - Traffic test verifying encapsulation.      |
-|                       | - Test case count: 12.                       |
-+-----------------------+----------------------------------------------+
-| NAT                   | - CRD for NAT entries, interface assignment. |
-|                       | - Configure and delete up to two NAT         |
-|                       |   entries.                                   |
-|                       | - Assign NAT entries to a physical           |
-|                       |   interface.                                 |
-|                       | - Test case count: 6.                        |
-+-----------------------+----------------------------------------------+
-| NSH_SFC (excluded)    | - CRD for NSH maps and entries, using        |
-|                       |   NSH_SFC plugin.                            |
-|                       | - Configure up to 2 NSH entries.             |
-|                       | - Configure up to 2 NSH maps.                |
-|                       | - Modify and delete NSH maps and entries.    |
-|                       | - Test case count: 8.                        |
-+-----------------------+----------------------------------------------+
-| PBB                   | - CRD for provider backbone bridge           |
-|                       |   sub-interface.                             |
-|                       | - Configure, modify and remove a PBB         |
-|                       |   sub-interface over a physical interface.   |
-|                       | - Test case count: 8.                        |
-+-----------------------+----------------------------------------------+
-| Policer               | - CRD for traffic policing feature.          |
-|                       | - Configure Policing rules.                  |
-|                       | - Assign to interface.                       |
-|                       | - Test case count: 6.                        |
-+-----------------------+----------------------------------------------+
-| Port mirroring        | - CRD for SPAN port mirroring, interface     |
-|                       |   assignment.                                |
-|                       | - Configure SPAN port mirroring on a         |
-|                       |   physical interface, mirroring.             |
-|                       | - up to 2 interfaces.                        |
-|                       | - Remove SPAN configuration from interfaces. |
-|                       | - Test case count: 14.                       |
-+-----------------------+----------------------------------------------+
-| ProxyARP              | - CRD for proxyARP feature.                  |
-|                       | - Configure proxyARP.                        |
-|                       | - Assign to interface.                       |
-|                       | - Test case count: 3.                        |
-+-----------------------+----------------------------------------------+
-| ProxyND6              | - CRD for Neighbor Discovery Proxy.          |
-|                       | - Configure ProxyND6 feature on interface.   |
-|                       | - Test case count: 4.                        |
-+-----------------------+----------------------------------------------+
-| Routing               | - CRD for routing.                           |
-|                       | - Configure single-hop route.                |
-|                       | - Configure multi-hop routes.                |
-|                       | - Configure blackhole route.                 |
-|                       | - IPv4 and IPv6 variants.                    |
-|                       | - Test case count: 6.                        |
-+-----------------------+----------------------------------------------+
-| SLAAC                 | - CRD for Stateless Address                  |
-|                       |   AutoConfiguration.                         |
-|                       | - Configure SLAAC feature on interfaces.     |
-|                       | - Test case count: 7.                        |
-+-----------------------+----------------------------------------------+
-| Vhost-user            | - CRUD for Vhost-user interfaces.            |
-|                       | - Create, modify and delete Vhost-user       |
-|                       |   interface, as client and server.           |
-|                       | - Test case count: 8.                        |
-+-----------------------+----------------------------------------------+
-| VLAN                  | - CRUD for VLAN sub-interface management.    |
-|                       | - Create VLAN sub-interface over a physical  |
-|                       |   interface.                                 |
-|                       | - Toggle interface state separately for      |
-|                       |   super-interface and sub-interface.         |
-|                       | - Configure IP address and bridge domain     |
-|                       |   assignment on sub-interface.               |
-|                       | - Configure VLAN tag rewrite on              |
-|                       |   sub-interface.                             |
-|                       | - Test case count: 24.                       |
-+-----------------------+----------------------------------------------+
-| VxLAN                 | - CRD for VxLAN tunnels.                     |
-|                       | - Create VxLAN interface.                    |
-|                       | - Disable VxLAN interface.                   |
-|                       | - Re-create a disabled VxLAN interface.      |
-|                       | - Test case count: 6.                        |
-+-----------------------+----------------------------------------------+
-| VxLAN-GPE             | - CRD for VxLAN GPE tunnels.                 |
-|                       | - Create VxLAN GPE interface.                |
-|                       | - Disable VxLAN interface.                   |
-|                       | - Re-create a disabled VxLAN interface.      |
-|                       | - Test case count: 7.                        |
-+-----------------------+----------------------------------------------+
-| TAP                   | - CRUD for Tap interface management.         |
-|                       | - Create, modify and delete TAP interface.   |
-|                       | - Test case count: 3.                        |
-+-----------------------+----------------------------------------------+
-
-Total 213 Honeycomb functional tests in the |csit-release|.
-
-Operational data in Honeycomb should mirror configuration data at all
-times. Because of this, test cases follow this general pattern:
-
-#. read operational data of the feature using restconf.
-#. read status of the feature using VPP API dump.
-#. modify configuration of the feature using restconf.
-#. verify changes to operational data using restconf.
-#. verify changes using VPP API dump, OR
-#. send a packet to VPP node and observe behaviour to verify configuration.
-
-Test cases involving network interfaces utilize the first two interfaces
-on the DUT node.
-
-Functional Tests Naming
------------------------
-
-|csit-release| follows a common structured naming convention for all
-performance and system functional tests, introduced in CSIT-17.01.
-
-The naming should be intuitive for majority of the tests. Complete
-description of CSIT test naming convention is provided on
-:ref:`csit_test_naming`.
diff --git a/docs/report/honeycomb_functional_tests/test_environment.rst b/docs/report/honeycomb_functional_tests/test_environment.rst
deleted file mode 100644
index c0e13b5423..0000000000
--- a/docs/report/honeycomb_functional_tests/test_environment.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-Test Environment
-================
-
-FD.io CSIT HoneyComb functional tests are executed in the same FD.io
-virtual environment as used CSIT VPP functional tests. See description
-in `VPP Functional Tests Environment
-<../vpp_functional_tests/test_environment.html>`_.
diff --git a/docs/report/index.html.template b/docs/report/index.html.template
index a5e57e9617..141ffbf370 100644
--- a/docs/report/index.html.template
+++ b/docs/report/index.html.template
@@ -63,16 +63,6 @@ CSIT-1908
 ..
     .. toctree::
         :maxdepth: 2
-        :caption: HoneyComb Functional
-
-        honeycomb_functional_tests/overview
-        honeycomb_functional_tests/csit_release_notes
-        honeycomb_functional_tests/test_environment
-        honeycomb_functional_tests/documentation
-
-..
-    .. toctree::
-        :maxdepth: 2
         :caption: NSH_SFC Functional
 
         nsh_sfc_functional_tests/overview
@@ -101,7 +91,6 @@ CSIT-1908
     detailed_test_results/vpp_device_results_ubuntu/index
 
 ..
-    detailed_test_results/honeycomb_functional_results/index
     detailed_test_results/dmm_functional_results/index
     detailed_test_results/nshsfc_functional_results/index
 
diff --git a/docs/report/introduction/introduction.rst b/docs/report/introduction/introduction.rst
index 5470cca4e9..be63cf5c1e 100644
--- a/docs/report/introduction/introduction.rst
+++ b/docs/report/introduction/introduction.rst
@@ -83,16 +83,6 @@ available for download.
    - **Documentation**: Pointers to CSIT source code documentation for
      VPP functional tests.
 
-#. HONEYCOMB FUNCTIONAL: Honeycomb functional tests executed in
-   virtual FD.io testbeds.
-
-   - **Overview**: Tested virtual topologies, test coverage and naming
-     specifics;
-   - **Release Notes**: Changes in |csit-release|, known issues.
-   - **Test Environment**: Functional test environment configuration.
-   - **Documentation**: Pointers to CSIT source code documentation for
-     Honeycomb functional tests.
-
 #. DETAILED RESULTS: Detailed result tables auto-generated from CSIT
    test job executions using RF (Robot Framework) output files as
    sources.