CSIT-1449 Ansible: Adding calibration support

- Remove obsolete bootstrap_setup.sh.
- Add calibration support into ansible.
- Inject Ansible run with calibration to every job.

Change-Id: Ib2d6cd0c04d3bce700b205bef34c3c88edb26e28
Signed-off-by: Peter Mikus <pmikus@cisco.com>

1 files changed, 0 insertions, 190 deletions

diff --git a/resources/libraries/bash/function/setup.sh b/resources/libraries/bash/function/setup.sh
deleted file mode 100644
index e481c539b4..0000000000
--- a/resources/libraries/bash/function/setup.sh
+++ /dev/null
@@ -1,190 +0,0 @@
-#!/usr/bin/env bash
-
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -exuo pipefail
-
-
-function ansible_host () {
-    # Setup host via ansible playbook.
-    #
-    # Variable read:
-    # - ${HOST} - Server production IP address (Linux).
-
-    set -exuo pipefail
-
-    pushd "${TOOLS_DIR}"/testbed-setup/ansible || die "Pushd failed!"
-    ssh-copy-id -o StrictHostKeyChecking=no testuser@"${HOST}"
-    ansible-playbook --vault-id vault_pass --extra-vars '@vault.yml' \
-        --inventory lf_inventory site.yaml --limit ${HOST} || {
-        die "Failed to ansible host!"
-    }
-    popd || die "Popd failed!"
-}
-
-
-function installed () {
-    # Check if the given utility is installed. Fail if not installed.
-    #
-    # Arguments:
-    # - ${1} - Utility to check.
-    # Returns:
-    # - 0 - If command is installed.
-    # - 1 - If command is not installed.
-
-    set -exuo pipefail
-
-    command -v "${1}"
-}
-
-
-function pxe_cimc () {
-    # Reboot server with next boot set to PXE, disables PXE after server is UP
-    # to prevent endless loop.
-    #
-    # Variable read:
-    # - ${HOST} - Server production IP address (Linux).
-    # - ${MGMT} - Server management IP address (IPMI/CIMC).
-    # - ${USER} - CIMC user.
-    # - ${PASS} - CIMC pass.
-
-    set -exuo pipefail
-
-    pushd "${TOOLS_DIR}"/testbed-setup/cimc || die "Pushd failed!"
-    ./cimc.py -u "${USER}" -p "${PASS}" "${MGMT}" --debug -pxe || {
-        die "Failed to send the PXE reboot command!"
-    }
-    for i in $(seq 1 500); do
-        warn "Waiting for server to become reachable ... " || die
-        if pingable "${HOST}"; then
-            ./cimc.py -u "${USER}" -p "${PASS}" "${MGMT}" --debug -hdd || {
-                die "Failed to send the HDD command!"
-            }
-            ssh-keygen -f "/home/testuser/.ssh/known_hosts" -R "${HOST}" || {
-                die "Failed to remove obsolete SSH key!"
-            }
-            warn "Server reachable, PXE running!" || die
-            break
-        fi
-    done
-    popd || die "Popd failed!"
-}
-
-
-function pxe_host () {
-    # Reboot host into PXE mode and detect once it is up.
-    #
-    # Variable read:
-    # - ${@} - All script arguments from command line.
-    # Variable set:
-    # - ${HOST} - Server production IP address (Linux).
-    # - ${MGMT} - Server management IP address (IPMI/CIMC).
-    # - ${USER} - User.
-    # - ${PASS} - Pass.
-
-    set -exuo pipefail
-
-    if ! installed ipmitool; then
-        die "ipmitool not present. Please install before continue!"
-    fi
-
-    HOST=${1}
-    MGMT=${2}
-    USER=${3}
-    PASS=${4}
-
-    ipmi="ipmitool -I lanplus -H ${MGMT} -U ${USER} -P ${PASS} chassis status"
-    cimc="./cimc.py -u ${USER} -p ${PASS} ${MGMT} --mac-table"
-    pushd "${TOOLS_DIR}"/testbed-setup/cimc || die "Pushd failed!"
-    if ${ipmi}; then
-        warn "This is IMPI managed server!"
-        pxe_supermicro || die
-    elif ${cimc}; then
-        warn "This is CIMC managed server!"
-        pxe_cimc || die
-    else
-        die "Unknown management console!"
-    fi
-    popd || die "Popd failed!"
-
-    wait_for_ssh || die
-}
-
-
-function pxe_supermicro () {
-    # Reboot server with next boot set to PXE.
-    #
-    # Variable read:
-    # - ${HOST} - Server production IP address (Linux).
-    # - ${MGMT} - Server management IP address (IPMI/CIMC).
-    # - ${USER} - IPMI user.
-    # - ${PASS} - IPMI pass.
-
-    set -exuo pipefail
-
-    if ! installed ipmitool; then
-        die "ipmitool not present. Please install before continue!"
-    fi
-
-    cmd="chassis bootdev pxe"
-    ipmitool -I lanplus -H "${MGMT}" -U "${USER}" -P "${PASS}" "${cmd}" || {
-        die "Failed to send the ${cmd} command!"
-    }
-    cmd="power reset"
-    ipmitool -I lanplus -H "${MGMT}" -U "${USER}" -P "${PASS}" "${cmd}" || {
-        die "Failed to send the ${cmd} command!"
-    }
-    for i in $(seq 1 500); do
-        warn "Waiting for server to become reachable ... " || die
-        if pingable "${HOST}"; then
-            ssh-keygen -f "/home/testuser/.ssh/known_hosts" -R "${HOST}" || {
-                die "Failed to remove obsolete SSH key!"
-            }
-            warn "Server reachable, PXE running!" || die
-            break
-        fi
-    done
-}
-
-
-function pingable () {
-    # Check if the host is reachable over ping. Fail if not reachable.
-    #
-    # Arguments:
-    # - ${1} - Host to check.
-    # Returns:
-    # - 0 - If host is reachable over ping.
-    # - 1 - If host is not reachable over ping.
-
-    set -exuo pipefail
-
-    ping -q -c 1 "${1}" 2>&1 > /dev/null
-}
-
-
-function wait_for_ssh () {
-    # Check if the host is reachable over SSH. Fail if not reachable.
-    #
-    # Variable read:
-    # - ${HOST} - Server production IP address (Linux).
-
-    set -exuo pipefail
-
-    while ! ssh "${HOST}"
-    do
-        warn "SSH not yet reachable, trying again!"
-        sleep 2
-    done
-    warn "SSH reachable!"
-}