Remove: Obsolete bash code

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: Ide17a2e2ae7e1311f00093c14f6c4879406e5868

6 files changed, 3 insertions, 258 deletions

diff --git a/resources/libraries/bash/config/config b/resources/libraries/bash/config/config
deleted file mode 100644
index 8cd1fe4793..0000000000
--- a/resources/libraries/bash/config/config
+++ /dev/null
@@ -1,8 +0,0 @@
-QEMU_INSTALL_DIR=/opt/qemu-2.11.2
-QEMU_INSTALL_VERSION=qemu-2.11.2
-QEMU_PATCH=false
-QEMU_FORCE_INSTALL=false
-QEMU_TARGET_LIST=x86_64-softmmu
-
-DPDK_INSTALL_DIR=/opt
-DPDK_INSTALL_VERSION=dpdk-17.11
diff --git a/resources/libraries/bash/config/defaults b/resources/libraries/bash/config/defaults
index 547fece17d..6a25a5f04d 100644
--- a/resources/libraries/bash/config/defaults
+++ b/resources/libraries/bash/config/defaults
@@ -2,13 +2,6 @@
 
 typeset -A cfg
 cfg=( # set default values in config array
-    [QEMU_INSTALL_DIR]="/opt/qemu-2.11.2"
-    [QEMU_INSTALL_VERSION]="qemu-2.11.2"
-    [QEMU_PATCH]=false
-    [QEMU_FORCE_INSTALL]=false
-    [QEMU_TARGET_LIST]=x86_64-softmmu
-    [DPDK_INSTALL_DIR]=/opt
-    [DPDK_INSTALL_VERSION]=dpdk-17.11
     [K8S_CALICO]="${SCRIPT_DIR}/../../templates/kubernetes/calico_v2.6.3.yaml"
     [K8S_CONTIV_VPP]="https://raw.githubusercontent.com/contiv/vpp/master/k8s/contiv-vpp.yaml"
     [K8S_CSIT]="${SCRIPT_DIR}/../../templates/kubernetes/csit.yaml"
diff --git a/resources/libraries/bash/k8s_setup.sh b/resources/libraries/bash/k8s_setup.sh
index 4128512f21..6ebfeecadd 100755
--- a/resources/libraries/bash/k8s_setup.sh
+++ b/resources/libraries/bash/k8s_setup.sh
@@ -18,19 +18,8 @@ SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 
 # Include
 source ${SCRIPT_DIR}/config/defaults
-source ${SCRIPT_DIR}/shell/dpdk_utils.sh
 source ${SCRIPT_DIR}/shell/k8s_utils.sh
 
-# Read configuration
-while read line
-do
-    if echo $line | grep -F = &>/dev/null
-    then
-        varname=$(echo "$line" | cut -d '=' -f 1)
-        cfg[$varname]=$(echo "$line" | cut -d '=' -f 2-)
-    fi
-done < ${SCRIPT_DIR}/config/config
-
 trap "k8s_utils.destroy" ERR
 
 case "$1" in
@@ -44,7 +33,9 @@ case "$1" in
         # Revert any changes made to this host by 'kubeadm init'
         k8s_utils.destroy
         # Load kernel modules uio/uio_pci_generic
-        dpdk_utils.load_modules
+        sudo modprobe uio
+        sudo modprobe uio_pci_generic
+        sudo modprobe vfio_pci
         # Sets up the Kubernetes master
         k8s_utils.prepare "--pod-network-cidr=192.168.0.0/16"
         # Apply resources
diff --git a/resources/libraries/bash/qemu_build.sh b/resources/libraries/bash/qemu_build.sh
deleted file mode 100755
index 4638ec1bcb..0000000000
--- a/resources/libraries/bash/qemu_build.sh
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/bash
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -x
-
-SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-
-# Include
-source ${SCRIPT_DIR}/config/defaults
-source ${SCRIPT_DIR}/shell/qemu_utils.sh
-
-# Read configuration
-while read line
-do
-    if echo $line | grep -F = &>/dev/null
-    then
-        varname=$(echo "$line" | cut -d '=' -f 1)
-        cfg[$varname]=$(echo "$line" | cut -d '=' -f 2-)
-    fi
-done < ${SCRIPT_DIR}/config/config
-
-# Read parameters
-for i in "$@"; do
-    case $i in
-        --version=*)
-            cfg['QEMU_INSTALL_VERSION']="${i#*=}"
-            shift ;;
-        --directory=*)
-            cfg['QEMU_INSTALL_DIR']="${i#*=}"
-            shift ;;
-        --patch)
-            cfg['QEMU_PATCH']=true
-            shift ;;
-        --force)
-            cfg['QEMU_FORCE_INSTALL']=true
-            shift ;;
-        --target-list)
-            cfg['QEMU_TARGET_LIST']="${i#*=}"
-            shift ;;
-        *)
-            ;;
-    esac
-done
-
-# Install qemu
-qemu_utils.qemu_install ${cfg[QEMU_INSTALL_DIR]} ${cfg[QEMU_INSTALL_VERSION]} \
-    ${cfg[QEMU_PATCH]} ${cfg[QEMU_FORCE_INSTALL]} ${cfg[QEMU_TARGET_LIST]}
diff --git a/resources/libraries/bash/shell/dpdk_utils.sh b/resources/libraries/bash/shell/dpdk_utils.sh
deleted file mode 100644
index 9f81aaabce..0000000000
--- a/resources/libraries/bash/shell/dpdk_utils.sh
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/bash
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-function dpdk_utils.dpdk_delete {
-    # Deletes the DPDK directory
-    # DPDK install directory
-    dpdk_install_dir=$1
-    # DPDK install version
-    dpdk_install_ver=$2
-
-    [ -d ${dpdk_install_dir}/${dpdk_install_ver} ] && \
-        sudo rm -r ${dpdk_install_dir}/${dpdk_install_ver} && \
-        echo "${dpdk_install_dir}/${dpdk_install_ver} removed"
-}
-
-function dpdk_utils.dpdk_install {
-    # Downloads and installs DPDK
-    # DPDK install directory
-    dpdk_install_dir=$1
-    # DPDK install version
-    dpdk_install_ver=$2
-    # DPDK compile target
-    dpdk_target=x86_64-native-linuxapp-gcc
-    # Force install (if true then remove previous installation; default false)
-    force_install=${3:-false}
-
-    if [ "$force_install" = true ]; then
-        # Cleanup DPDK DIR
-        dpdk_utils.dpdk_delete ${dpdk_install_dir} ${dpdk_install_ver}
-    else
-        # Test if DPDK was installed previously
-        test -d ${dpdk_install_dir}/${dpdk_install_ver} && \
-            { echo "DPDK ${dpdk_install_ver} ready"; exit 0; }
-    fi
-
-    # Download the DPDK package if no local copy exists
-    if [ ! -f ${dpdk_install_dir}/${dpdk_install_ver}.tar.xz ]; then
-        sudo wget -e use_proxy=yes -P ${dpdk_install_dir} -q \
-            fast.dpdk.org/rel/${dpdk_install_ver}.tar.xz || \
-            { echo "Failed to download ${dpdk_install_ver}"; exit 1; }
-    fi
-
-    # Create DPDK install dir if not exists and extract
-    sudo mkdir -p ${dpdk_install_dir} || \
-        { echo "Failed to create ${dpdk_install_dir}"; exit 1; }
-    sudo tar -xJf ${dpdk_install_dir}/${dpdk_install_ver}.tar.xz \
-        -C ${dpdk_install_dir} || \
-        { echo "Failed to extract ${dpdk_install_ver}.tar.xz"; exit 1; }
-
-    cd ${dpdk_install_dir}/${dpdk_install_ver}
-
-    # Compile and install the DPDK
-    sudo make install T=${dpdk_target} -j DESTDIR=install || \
-        { echo "Installation of ${dpdk_install_ver} failed"; exit 1; }
-
-    echo "DPDK ${dpdk_install_ver} ready"
-}
-
-function dpdk_utils.load_modules {
-    # Loads kernel modules and bind interfaces to drivers
-    # Use igb_uio [true|false]
-    use_igb_uio=${1:-false}
-    # DPDK install directory
-    dpdk_install_dir=$2
-    # DPDK install version
-    dpdk_install_ver=$3
-
-    sudo modprobe uio
-    sudo modprobe uio_pci_generic
-
-    if [ "${use_igb_uio}" = true ]; then
-        sudo rmmod igb_uio
-        # Try to insert IGB_UIO module
-        sudo insmod ${dpdk_install_dir}/${dpdk_install_ver}/x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
-        # If failed then download/compile DPDK
-        if [ $? -ne 0 ]; then
-            dpdk_utils.dpdk_install ${dpdk_install_dir} ${dpdk_install_ver} true
-            sudo insmod ${dpdk_install_dir}/${dpdk_install_ver}/x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
-        fi
-    fi
-}
diff --git a/resources/libraries/bash/shell/qemu_utils.sh b/resources/libraries/bash/shell/qemu_utils.sh
deleted file mode 100644
index cabf93d978..0000000000
--- a/resources/libraries/bash/shell/qemu_utils.sh
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/bin/bash
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-function qemu_utils.qemu_delete {
-    # Deletes the QEMU directory
-    # QEMU install directory
-    local qemu_install_dir=$1
-
-    [ -d ${qemu_install_dir} ] && \
-        sudo rm -r ${qemu_install_dir} && \
-        echo "${qemu_install_dir} removed"
-}
-
-function qemu_utils.qemu_install {
-    # Downloads and installs QEMU
-    # QEMU install directory
-    local qemu_install_dir=$1
-    # QEMU install version
-    local qemu_install_ver=$2
-    # QEMU patch
-    local qemu_patch=${3:-false}
-    # Force install (if true then remove previous installation; default false)
-    local force_install=${4:-false}
-    # QEMU repo URL
-    local qemu_package_url="http://download.qemu-project.org/${qemu_install_ver}.tar.xz"
-    # QEMU target arch
-    local qemu_target_list=${5:-x86_64-softmmu}
-
-    if [ $force_install = true ]; then
-        # Cleanup QEMU dir
-        qemu_utils.qemu_delete $qemu_install_dir
-    else
-        # Test if QEMU was installed previously
-        test -d $qemu_install_dir && \
-            { echo "Qemu already installed: $qemu_install_dir"; exit 0; }
-    fi
-
-    local tmp_dir=$(mktemp -d) || \
-        { echo "Failed to create temporary working dir"; exit 1; }
-    trap "sudo rm -r ${tmp_dir}" EXIT
-
-    # Download QEMU source code if no local copy exists
-    if [ ! -f /opt/${qemu_install_ver}.tar.xz ]; then
-        sudo wget -e use_proxy=yes -P /opt -q ${qemu_package_url} || \
-            { echo "Failed to download ${qemu_install_ver}"; exit 1; }
-    fi
-    tar --strip-components 1 -xf /opt/${qemu_install_ver}.tar.xz -C ${tmp_dir} || \
-        { echo "Failed to exctract ${qemu_install_ver}.tar.xz"; exit 1; }
-
-    cd ${tmp_dir}
-    sudo mkdir -p ${qemu_install_dir} || \
-        { echo "Failed to create ${qemu_install_dir}"; exit 1; }
-
-    # Apply additional patches
-    if [ $qemu_patch = true ]
-    then
-        chmod +x ${SCRIPT_DIR}/qemu_patches/${qemu_install_ver}/*
-        run-parts --verbose --report  ${SCRIPT_DIR}/qemu_patches/${qemu_install_ver}
-    fi
-
-    # Build
-    sudo ./configure --target-list=${qemu_target_list} --prefix=${qemu_install_dir} || \
-        { echo "Failed to configure ${qemu_install_ver}"; exit 1; }
-    sudo make -j`nproc` || \
-        { echo "Failed to compile ${qemu_install_ver}"; exit 1; }
-    sudo make install || \
-        { echo "Failed to install ${qemu_install_ver}"; exit 1; }
-
-    echo "QEMU ${qemu_install_ver} ready"
-}