Move Honeycomb libraries to honeycomb subdirectory.

- move all Honeycomb related libraries written in python to new
  directory resources/libraries/python/honeycomb
- update all related includes in all source files

Change-Id: Ifa96b8f670b456b14421929d6020ddf8e02d9cbc
Signed-off-by: Tibor Frank <tifrank@cisco.com>

1 files changed, 713 insertions, 0 deletions

diff --git a/resources/libraries/python/honeycomb/HcAPIKwInterfaces.py b/resources/libraries/python/honeycomb/HcAPIKwInterfaces.py
new file mode 100644
index 0000000000..8f6819ef5e
--- /dev/null
+++ b/resources/libraries/python/honeycomb/HcAPIKwInterfaces.py
@@ -0,0 +1,713 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Keywords to manipulate interface configuration using Honeycomb REST API.
+
+The keywords make possible to put and get configuration data and to get
+operational data.
+"""
+
+from resources.libraries.python.HTTPRequest import HTTPCodes
+from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
+from resources.libraries.python.honeycomb.HoneycombUtil \
+    import DataRepresentation
+from resources.libraries.python.honeycomb.HoneycombUtil \
+    import HoneycombUtil as HcUtil
+
+
+class InterfaceKeywords(object):
+    """Keywords for Interface manipulation.
+
+    Implements keywords which get configuration and operational data about
+    vpp interfaces and set the interface's parameters using Honeycomb REST API.
+    """
+
+    INTF_PARAMS = ("name", "description", "type", "enabled",
+                   "link-up-down-trap-enable")
+    IPV4_PARAMS = ("enabled", "forwarding", "mtu")
+    IPV6_PARAMS = ("enabled", "forwarding", "mtu", "dup-addr-detect-transmits")
+    IPV6_AUTOCONF_PARAMS = ("create-global-addresses",
+                            "create-temporary-addresses",
+                            "temporary-valid-lifetime",
+                            "temporary-preferred-lifetime")
+    ETH_PARAMS = ("mtu", )
+    ROUTING_PARAMS = ("vrf-id", )
+    VXLAN_PARAMS = ("src", "dst", "vni", "encap-vrf-id")
+    L2_PARAMS = ("bridge-domain", "split-horizon-group",
+                 "bridged-virtual-interface")
+
+    def __init__(self):
+        pass
+
+    @staticmethod
+    def _configure_interface(node, interface, data,
+                             data_representation=DataRepresentation.JSON):
+        """Send interface configuration data and check the response.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param data: Configuration data to be sent in PUT request.
+        :param data_representation: How the data is represented.
+        :type node: dict
+        :type interface: str
+        :type data: dict
+        :type data_representation: DataRepresentation
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the status code in response on PUT is not
+        200 = OK.
+        """
+
+        status_code, resp = HcUtil.\
+            put_honeycomb_data(node, "config_vpp_interfaces", data,
+                               data_representation=data_representation)
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "The configuration of interface '{0}' was not successful. "
+                "Status code: {1}.".format(interface, status_code))
+        return resp
+
+    @staticmethod
+    def get_all_interfaces_cfg_data(node):
+        """Get configuration data about all interfaces from Honeycomb.
+
+        :param node: Honeycomb node.
+        :type node: dict
+        :return: Configuration data about all interfaces from Honeycomb.
+        :rtype: list
+        :raises HoneycombError: If it is not possible to get configuration data.
+        """
+
+        status_code, resp = HcUtil.\
+            get_honeycomb_data(node, "config_vpp_interfaces")
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get configuration information about the "
+                "interfaces. Status code: {0}.".format(status_code))
+        try:
+            return resp["interfaces"]["interface"]
+
+        except (KeyError, TypeError):
+            return []
+
+    @staticmethod
+    def get_interface_cfg_data(node, interface):
+        """Get configuration data about the given interface from Honeycomb.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :type node: dict
+        :type interface: str
+        :return: Configuration data about the given interface from Honeycomb.
+        :rtype: dict
+        """
+
+        intfs = InterfaceKeywords.get_all_interfaces_cfg_data(node)
+        for intf in intfs:
+            if intf["name"] == interface:
+                return intf
+        return {}
+
+    @staticmethod
+    def get_all_interfaces_oper_data(node):
+        """Get operational data about all interfaces from Honeycomb.
+
+        :param node: Honeycomb node.
+        :type node: dict
+        :return: Operational data about all interfaces from Honeycomb.
+        :rtype: list
+        :raises HoneycombError: If it is not possible to get operational data.
+        """
+
+        status_code, resp = HcUtil.\
+            get_honeycomb_data(node, "oper_vpp_interfaces")
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get operational information about the "
+                "interfaces. Status code: {0}.".format(status_code))
+        try:
+            return resp["interfaces-state"]["interface"]
+
+        except (KeyError, TypeError):
+            return []
+
+    @staticmethod
+    def get_interface_oper_data(node, interface):
+        """Get operational data about the given interface from Honeycomb.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :type node: dict
+        :type interface: str
+        :return: Operational data about the given interface from Honeycomb.
+        :rtype: dict
+        """
+
+        intfs = InterfaceKeywords.get_all_interfaces_oper_data(node)
+        for intf in intfs:
+            if intf["name"] == interface:
+                return intf
+        return {}
+
+    @staticmethod
+    def _set_interface_properties(node, interface, path, new_value=None):
+        """Set interface properties.
+
+        This method reads interface configuration data, creates, changes or
+        removes the requested data and puts it back to Honeycomb.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param path:  Path to data we want to change / create / remove.
+        :param new_value: The new value to be set. If None, the item will be
+        removed.
+        :type node: dict
+        :type interface: str
+        :type path: tuple
+        :type new_value: str, dict or list
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If it is not possible to get or set the data.
+        """
+
+        status_code, resp = HcUtil.\
+            get_honeycomb_data(node, "config_vpp_interfaces")
+        if status_code != HTTPCodes.OK:
+            raise HoneycombError(
+                "Not possible to get configuration information about the "
+                "interfaces. Status code: {0}.".format(status_code))
+
+        if new_value:
+            new_data = HcUtil.set_item_value(resp, path, new_value)
+        else:
+            new_data = HcUtil.remove_item(resp, path)
+        return InterfaceKeywords._configure_interface(node, interface, new_data)
+
+    @staticmethod
+    def set_interface_state(node, interface, state="up"):
+        """Set VPP interface state.
+
+        The keyword changes the administration state of interface to up or down
+        depending on the parameter "state".
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param state: The requested state, only "up" and "down" are valid
+        values.
+        :type node: dict
+        :type interface: str
+        :type state: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises KeyError: If the argument "state" is nor "up" or "down".
+        :raises HoneycombError: If the interface is not present on the node.
+        """
+
+        intf_state = {"up": "true",
+                      "down": "false"}
+
+        path = ("interfaces", ("interface", "name", str(interface)), "enabled")
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, intf_state[state.lower()])
+
+    @staticmethod
+    def set_interface_up(node, interface):
+        """Set the administration state of VPP interface to up.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :type node: dict
+        :type interface: str
+        :return: Content of response
+        :rtype: bytearray
+        """
+
+        return InterfaceKeywords.set_interface_state(node, interface, "up")
+
+    @staticmethod
+    def set_interface_down(node, interface):
+        """Set the administration state of VPP interface to down.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :type node: dict
+        :type interface: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        return InterfaceKeywords.set_interface_state(node, interface, "down")
+
+    @staticmethod
+    def add_bridge_domain_to_interface(node, interface, bd_name,
+                                       split_horizon_group=None, bvi=None):
+        """Add a new bridge domain to an interface and set its parameters.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param bd_name: Bridge domain name.
+        :param split_horizon_group: Split-horizon group name.
+        :param bvi: The bridged virtual interface.
+        :type node: dict
+        :type interface: str
+        :type bd_name: str
+        :type split_horizon_group: str
+        :type bvi: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the interface is not present on the node.
+        """
+
+        v3po_l2 = {"bridge-domain": str(bd_name)}
+        if split_horizon_group:
+            v3po_l2["split-horizon-group"] = str(split_horizon_group)
+        if bvi:
+            v3po_l2["bridged-virtual-interface"] = str(bvi)
+
+        path = ("interfaces", ("interface", "name", str(interface)), "v3po:l2")
+
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, v3po_l2)
+
+    @staticmethod
+    def configure_interface_base(node, interface, param, value):
+        """Configure the base parameters of interface.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param param: Parameter to configure (set, change, remove)
+        :param value: The value of parameter. If None, the parameter will be
+        removed.
+        :type node: dict
+        :type interface: str
+        :type param: str
+        :type value: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the parameter is not valid.
+        """
+
+        if param not in InterfaceKeywords.INTF_PARAMS:
+            raise HoneycombError("The parameter {0} is invalid.".format(param))
+
+        path = ("interfaces", ("interface", "name", interface), param)
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, value)
+
+    @staticmethod
+    def configure_interface_ipv4(node, interface, param, value):
+        """Configure IPv4 parameters of interface
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param param: Parameter to configure (set, change, remove)
+        :param value: The value of parameter. If None, the parameter will be
+        removed.
+        :type node: dict
+        :type interface: str
+        :type param: str
+        :type value: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the parameter is not valid.
+        """
+
+        if param not in InterfaceKeywords.IPV4_PARAMS:
+            raise HoneycombError("The parameter {0} is invalid.".format(param))
+
+        path = ("interfaces", ("interface", "name", interface),
+                "ietf-ip:ipv4", param)
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, value)
+
+    @staticmethod
+    def add_first_ipv4_address(node, interface, ip_addr, netmask):
+        """Add the first IPv4 address.
+
+        If there are any other addresses configured, they will be removed.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param ip_addr: IPv4 address to be set.
+        :param netmask: Netmask.
+        :type node: dict
+        :type interface: str
+        :type ip_addr: str
+        :type netmask: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4")
+        address = {"address": [{"ip": ip_addr, "netmask": netmask}, ]}
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, address)
+
+    @staticmethod
+    def add_ipv4_address(node, interface, ip_addr, netmask):
+        """Add IPv4 address.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param ip_addr: IPv4 address to be set.
+        :param netmask: Netmask.
+        :type node: dict
+        :type interface: str
+        :type ip_addr: str
+        :type netmask: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4",
+                "address")
+        address = [{"ip": ip_addr, "prefix-length": netmask}, ]
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, address)
+
+    @staticmethod
+    def remove_all_ipv4_addresses(node, interface):
+        """Remove all IPv4 addresses from interface.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :type node: dict
+        :type interface: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4",
+                "address")
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, None)
+
+    @staticmethod
+    def add_first_ipv4_neighbor(node, interface, ip_addr, link_layer_address):
+        """Add the first IPv4 neighbour.
+
+        If there are any other neighbours configured, they will be removed.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param ip_addr: IPv4 address of neighbour to be set.
+        :param link_layer_address: Link layer address.
+        :type node: dict
+        :type interface: str
+        :type ip_addr: str
+        :type link_layer_address: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4")
+        neighbor = {"neighbor": [{"ip": ip_addr,
+                                  "link-layer-address": link_layer_address}, ]}
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, neighbor)
+
+    @staticmethod
+    def add_ipv4_neighbor(node, interface, ip_addr, link_layer_address):
+        """Add the IPv4 neighbour.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param ip_addr: IPv4 address of neighbour to be set.
+        :param link_layer_address: Link layer address.
+        :type node: dict
+        :type interface: str
+        :type ip_addr: str
+        :type link_layer_address: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4",
+                "neighbor")
+        neighbor = [{"ip": ip_addr, "link-layer-address": link_layer_address}, ]
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, neighbor)
+
+    @staticmethod
+    def remove_all_ipv4_neighbors(node, interface):
+        """Remove all IPv4 neighbours.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :type node: dict
+        :type interface: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4",
+                "neighbor")
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, None)
+
+    @staticmethod
+    def configure_interface_ipv6(node, interface, param, value):
+        """Configure IPv6 parameters of interface
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param param: Parameter to configure (set, change, remove)
+        :param value: The value of parameter. If None, the parameter will be
+        removed.
+        :type node: dict
+        :type interface: str
+        :type param: str
+        :type value: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the parameter is not valid.
+        """
+
+        if param in InterfaceKeywords.IPV6_PARAMS:
+            path = ("interfaces", ("interface", "name", interface),
+                    "ietf-ip:ipv6", param)
+        elif param in InterfaceKeywords.IPV6_AUTOCONF_PARAMS:
+            path = ("interfaces", ("interface", "name", interface),
+                    "ietf-ip:ipv6", "autoconf", param)
+        else:
+            raise HoneycombError("The parameter {0} is invalid.".format(param))
+
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, value)
+
+    @staticmethod
+    def add_first_ipv6_address(node, interface, ip_addr, prefix_len):
+        """Add the first IPv6 address.
+
+        If there are any other addresses configured, they will be removed.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param ip_addr: IPv6 address to be set.
+        :param prefix_len: Prefix length.
+        :type node: dict
+        :type interface: str
+        :type ip_addr: str
+        :type prefix_len: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6")
+        address = {"address": [{"ip": ip_addr, "prefix-length": prefix_len}, ]}
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, address)
+
+    @staticmethod
+    def add_ipv6_address(node, interface, ip_addr, prefix_len):
+        """Add IPv6 address.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param ip_addr: IPv6 address to be set.
+        :param prefix_len: Prefix length.
+        :type node: dict
+        :type interface: str
+        :type ip_addr: str
+        :type prefix_len: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6",
+                "address")
+        address = [{"ip": ip_addr, "prefix-length": prefix_len}, ]
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, address)
+
+    @staticmethod
+    def remove_all_ipv6_addresses(node, interface):
+        """Remove all IPv6 addresses from interface.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :type node: dict
+        :type interface: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6",
+                "address")
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, None)
+
+    @staticmethod
+    def add_first_ipv6_neighbor(node, interface, ip_addr, link_layer_address):
+        """Add the first IPv6 neighbour.
+
+        If there are any other neighbours configured, they will be removed.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param ip_addr: IPv6 address of neighbour to be set.
+        :param link_layer_address: Link layer address.
+        :type node: dict
+        :type interface: str
+        :type ip_addr: str
+        :type link_layer_address: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6")
+        neighbor = {"neighbor": [{"ip": ip_addr,
+                                  "link-layer-address": link_layer_address}, ]}
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, neighbor)
+
+    @staticmethod
+    def add_ipv6_neighbor(node, interface, ip_addr, link_layer_address):
+        """Add the IPv6 neighbour.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param ip_addr: IPv6 address of neighbour to be set.
+        :param link_layer_address: Link layer address.
+        :type node: dict
+        :type interface: str
+        :type ip_addr: str
+        :type link_layer_address: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6",
+                "neighbor")
+        neighbor = [{"ip": ip_addr, "link-layer-address": link_layer_address}, ]
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, neighbor)
+
+    @staticmethod
+    def remove_all_ipv6_neighbors(node, interface):
+        """Remove all IPv6 neighbours.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :type node: dict
+        :type interface: str
+        :return: Content of response.
+        :rtype: bytearray
+        """
+
+        path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6",
+                "neighbor")
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, None)
+
+    @staticmethod
+    def configure_interface_ethernet(node, interface, param, value):
+        """Configure the ethernet parameters of interface.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param param: Parameter to configure (set, change, remove)
+        :param value: The value of parameter. If None, the parameter will be
+        removed.
+        :type node: dict
+        :type interface: str
+        :type param: str
+        :type value: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the parameter is not valid.
+        """
+
+        if param not in InterfaceKeywords.ETH_PARAMS:
+            raise HoneycombError("The parameter {0} is invalid.".format(param))
+        path = ("interfaces", ("interface", "name", interface), "v3po:ethernet",
+                param)
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, value)
+
+    @staticmethod
+    def configure_interface_routing(node, interface, param, value):
+        """Configure the routing parameters of interface.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param param: Parameter to configure (set, change, remove)
+        :param value: The value of parameter. If None, the parameter will be
+        removed.
+        :type node: dict
+        :type interface: str
+        :type param: str
+        :type value: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the parameter is not valid.
+        """
+
+        if param not in InterfaceKeywords.ROUTING_PARAMS:
+            raise HoneycombError("The parameter {0} is invalid.".format(param))
+
+        path = ("interfaces", ("interface", "name", interface), "v3po:routing",
+                param)
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, value)
+
+    @staticmethod
+    def configure_interface_vxlan(node, interface, param, value):
+        """Configure the VxLAN parameters of interface.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param param: Parameter to configure (set, change, remove)
+        :param value: The value of parameter. If None, the parameter will be
+        removed.
+        :type node: dict
+        :type interface: str
+        :type param: str
+        :type value: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the parameter is not valid.
+        """
+
+        if param not in InterfaceKeywords.VXLAN_PARAMS:
+            raise HoneycombError("The parameter {0} is invalid.".format(param))
+
+        path = ("interfaces", ("interface", "name", interface), "v3po:vxlan",
+                param)
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, value)
+
+    @staticmethod
+    def configure_interface_l2(node, interface, param, value):
+        """Configure the L2 parameters of interface.
+
+        :param node: Honeycomb node.
+        :param interface: The name of interface.
+        :param param: Parameter to configure (set, change, remove)
+        :param value: The value of parameter. If None, the parameter will be
+        removed.
+        :type node: dict
+        :type interface: str
+        :type param: str
+        :type value: str
+        :return: Content of response.
+        :rtype: bytearray
+        :raises HoneycombError: If the parameter is not valid.
+        """
+
+        if param not in InterfaceKeywords.L2_PARAMS:
+            raise HoneycombError("The parameter {0} is invalid.".format(param))
+        path = ("interfaces", ("interface", "name", interface), "v3po:l2",
+                param)
+        return InterfaceKeywords._set_interface_properties(
+            node, interface, path, value)