aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/python/honeycomb
diff options
context:
space:
mode:
authorPeter Mikus <pmikus@cisco.com>2019-11-11 16:14:32 +0000
committerPeter Mikus <pmikus@cisco.com>2019-11-19 06:43:59 +0000
commite7ad66f3147662973039caaac33015de7e0c6f8c (patch)
tree809a056325425bad672a8a9274c3c2d696a35030 /resources/libraries/python/honeycomb
parent20cc67d5f23a7f4e05b08012bf3d3a63be4bcf63 (diff)
HONEYCOMB: Remove
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I60d80564050cb786c7b1e0a08f31f8292f82197e
Diffstat (limited to 'resources/libraries/python/honeycomb')
-rw-r--r--resources/libraries/python/honeycomb/BGP.py396
-rw-r--r--resources/libraries/python/honeycomb/DHCP.py110
-rw-r--r--resources/libraries/python/honeycomb/FIB.py139
-rw-r--r--resources/libraries/python/honeycomb/HcAPIKwACL.py374
-rw-r--r--resources/libraries/python/honeycomb/HcAPIKwBridgeDomain.py482
-rw-r--r--resources/libraries/python/honeycomb/HcAPIKwInterfaces.py1908
-rw-r--r--resources/libraries/python/honeycomb/HcAPIKwNSH.py173
-rw-r--r--resources/libraries/python/honeycomb/HcPersistence.py142
-rw-r--r--resources/libraries/python/honeycomb/HoneycombSetup.py821
-rw-r--r--resources/libraries/python/honeycomb/HoneycombUtil.py512
-rw-r--r--resources/libraries/python/honeycomb/IPv6Management.py147
-rw-r--r--resources/libraries/python/honeycomb/Lisp.py671
-rw-r--r--resources/libraries/python/honeycomb/NAT.py143
-rw-r--r--resources/libraries/python/honeycomb/Netconf.py166
-rw-r--r--resources/libraries/python/honeycomb/Notifications.py68
-rw-r--r--resources/libraries/python/honeycomb/Performance.py129
-rw-r--r--resources/libraries/python/honeycomb/ProxyARP.py232
-rw-r--r--resources/libraries/python/honeycomb/Routing.py328
-rw-r--r--resources/libraries/python/honeycomb/__init__.py16
19 files changed, 0 insertions, 6957 deletions
diff --git a/resources/libraries/python/honeycomb/BGP.py b/resources/libraries/python/honeycomb/BGP.py
deleted file mode 100644
index 976e41d379..0000000000
--- a/resources/libraries/python/honeycomb/BGP.py
+++ /dev/null
@@ -1,396 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Keywords to manipulate BGP configuration using Honeycomb REST API."""
-
-from resources.libraries.python.Constants import Constants as Const
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-
-
-class BGPKeywords(object):
- """Keywords to manipulate BGP configuration.
-
- Implements keywords which read configuration and operational data for
- the BGP feature, and configure BGP parameters using Honeycomb REST API.
- """
-
- def __init__(self):
- """Initializer."""
- pass
-
- @staticmethod
- def _configure_bgp_peer(node, path, data=None):
- """Send BGP peer configuration data and check the response.
-
- :param node: Honeycomb node.
- :param path: Additional path to append to the base BGP config path.
- :param data: Configuration data to be sent in PUT request.
- :type node: dict
- :type path: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response to PUT is not
- 200 = OK or 201 = ACCEPTED.
- """
-
- if data is None:
- status_code, resp = HcUtil. \
- delete_honeycomb_data(node, "config_bgp_peer", path)
- else:
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_bgp_peer", data, path)
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of BGP peer was not successful. "
- "Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def _configure_bgp_route(node, path, data=None):
- """Send BGP route configuration data and check the response.
-
- :param node: Honeycomb node.
- :param path: Additional path to append to the base BGP config path.
- :param data: Configuration data to be sent in PUT request.
- :type node: dict
- :type path: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response to PUT is not
- 200 = OK or 201 = ACCEPTED.
- """
-
- if data is None:
- status_code, resp = HcUtil. \
- delete_honeycomb_data(node, "config_bgp_route", path)
- else:
- status_code, resp = HcUtil. \
- put_honeycomb_data(node, "config_bgp_route", data, path)
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of BGP route was not successful. "
- "Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def get_full_bgp_configuration(node):
- """Get BGP configuration from the node.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: BGP configuration data.
- :rtype: dict
- :raises HoneycombError: If the status code in response is not 200 = OK.
- """
-
- status_code, resp = HcUtil. \
- get_honeycomb_data(node, "config_bgp_peer")
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get configuration information about BGP."
- " Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def get_bgp_peer(node, address, datastore='config'):
- """Get BGP configuration of the specified peer from the node.
-
- :param node: Honeycomb node.
- :param address: IP address of the peer.
- :param datastore: Get data from config or operational datastore.
- :type node: dict
- :type address: str
- :type datastore: str
- :returns: BGP peer configuration data.
- :rtype: dict
- :raises HoneycombError: If the status code in response is not 200 = OK.
- """
-
- path = "bgp-openconfig-extensions:neighbors/" \
- "neighbor/{0}".format(address)
- if datastore != "operational":
- url = "config_bgp_peer"
- else:
- url = "oper_bgp"
- path = "peer/bgp:%2F%2F{0}".format(address)
- status_code, resp = HcUtil. \
- get_honeycomb_data(node, url, path)
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get configuration information about the BGP"
- " peer. Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def add_bgp_peer(node, address, data):
- """Configure a BGP peer on the node.
-
- :param node: Honeycomb node.
- :param address: IP address of the peer.
- :param data: Peer configuration data.
- :type node: dict
- :type address: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "bgp-openconfig-extensions:neighbors/neighbor/{address}".format(
- address=address)
- return BGPKeywords._configure_bgp_peer(node, path, data)
-
- @staticmethod
- def remove_bgp_peer(node, address):
- """Remove a BGP peer from the configuration.
-
- :param node: Honeycomb node.
- :param address: IP address of the peer.
- :type node: dict
- :type address: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "bgp-openconfig-extensions:neighbors/neighbor/{address}".format(
- address=address)
- return BGPKeywords._configure_bgp_peer(node, path)
-
- @staticmethod
- def configure_bgp_route(node, peer_address, data, route_address,
- index, ip_version):
- """Configure a route for the BGP peer specified by peer IP address.
-
- :param node: Honeycomb node.
- :param peer_address: IP address of the BGP peer.
- :param data: Route configuration data.
- :param route_address: IP address of the route.
- :param index: Index number of the route within specified peer.
- :param ip_version: IP protocol version. ipv4 or ipv6
- :type node: dict
- :type peer_address: str
- :type data: dict
- :type route_address: str
- :type index: int
- :type ip_version: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- route_address = route_address.replace("/", "%2F")
-
- if ip_version.lower() == "ipv4":
- path = "{0}/tables/bgp-types:ipv4-address-family/" \
- "bgp-types:unicast-subsequent-address-family/" \
- "bgp-inet:ipv4-routes/ipv4-route/{1}/{2}" \
- .format(peer_address, route_address, index)
- else:
- path = "{0}/tables/bgp-types:ipv6-address-family/" \
- "bgp-types:unicast-subsequent-address-family/" \
- "bgp-inet:ipv6-routes/ipv6-route/{1}/{2}" \
- .format(peer_address, route_address, index)
-
- return BGPKeywords._configure_bgp_route(node, path, data)
-
- @staticmethod
- def get_bgp_route(node, peer_address, route_address, index, ip_version):
- """Get all BGP peers from operational data.
-
- :param node: Honeycomb node.
- :param peer_address: IP address of the BGP peer.
- :param route_address: IP address of the route.
- :param index: Index number of the route within specified peer.
- :param ip_version: IP protocol version. ipv4 or ipv6
- :type node: dict
- :type peer_address: str
- :type route_address: str
- :type index: int
- :type ip_version: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response is not 200 = OK.
- """
-
- route_address = route_address.replace("/", "%2F")
-
- if ip_version.lower() == "ipv4":
- path = "{0}/tables/bgp-types:ipv4-address-family/" \
- "bgp-types:unicast-subsequent-address-family/" \
- "bgp-inet:ipv4-routes/ipv4-route/{1}/{2}" \
- .format(peer_address, route_address, index)
- else:
- path = "{0}/tables/bgp-types:ipv6-address-family/" \
- "bgp-types:unicast-subsequent-address-family/" \
- "bgp-inet:ipv6-routes/ipv6-route/{1}/{2}" \
- .format(peer_address, route_address, index)
- status_code, resp = HcUtil. \
- get_honeycomb_data(node, "config_bgp_route", path)
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get configuration information about the BGP"
- " route. Status code: {0}.".format(status_code))
-
- return resp
-
- @staticmethod
- def get_all_peer_routes(node, peer_address, ip_version):
- """Get all configured routes for the given BGP peer.
-
- :param node: Honeycomb node.
- :param peer_address: IP address of the peer.
- :param ip_version: IP protocol version. ipv4 or ipv6
- :type node: dict
- :type peer_address: str
- :type ip_version: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response is not 200 = OK.
- """
-
- if ip_version.lower() == "ipv4":
- path = "{0}/tables/bgp-types:ipv4-address-family/" \
- "bgp-types:unicast-subsequent-address-family/" \
- "bgp-inet:ipv4-routes".format(peer_address)
- else:
- path = "{0}/tables/bgp-types:ipv6-address-family/" \
- "bgp-types:unicast-subsequent-address-family/" \
- "bgp-inet:ipv6-routes".format(peer_address)
- status_code, resp = HcUtil. \
- get_honeycomb_data(node, "config_bgp_route", path)
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get configuration information about BGP"
- " routes. Status code: {0}.".format(status_code))
-
- return resp
-
- @staticmethod
- def remove_bgp_route(node, peer_address, route_address, index, ip_version):
- """Remove the specified BGP route from configuration.
-
- :param node: Honeycomb node.
- :param peer_address: IP address of the BGP peer.
- :param route_address: IP address of the route.
- :param index: Index number of the route within specified peer.
- :param ip_version: IP protocol version. ipv4 or ipv6
- :type node: dict
- :type peer_address: str
- :type route_address: str
- :type index: int
- :type ip_version: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- route_address = route_address.replace("/", "%2F")
-
- if ip_version.lower() == "ipv4":
- path = "{0}/tables/bgp-types:ipv4-address-family/" \
- "bgp-types:unicast-subsequent-address-family/" \
- "bgp-inet:ipv4-routes/ipv4-route/{1}/{2}" \
- .format(peer_address, route_address, index)
- else:
- path = "{0}/tables/bgp-types:ipv6-address-family/" \
- "bgp-types:unicast-subsequent-address-family/" \
- "bgp-inet:ipv6-routes/ipv6-route/{1}/{2}" \
- .format(peer_address, route_address, index)
-
- return BGPKeywords._configure_bgp_route(node, path)
-
- @staticmethod
- def get_bgp_local_rib(node):
- """Get local RIB table from the Honeycomb node.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: RIB operational data.
- :rtype: dict
- :raises HoneycombError: If the status code in response is not 200 = OK.
- """
-
- path = "loc-rib"
-
- status_code, resp = HcUtil. \
- get_honeycomb_data(node, "oper_bgp", path)
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational data from BGP local RIB."
- " Status code: {0}.".format(status_code))
-
- return resp
-
- @staticmethod
- def configure_bgp_base(node, ip_address, port, as_number):
- """Modify BGP config file. Requires a restart of Honeycomb to take
- effect.
-
- :param node: Honeycomb node.
- :param ip_address: BGP peer identifier/binding address.
- :param port: BGP binding port.
- :param as_number: Autonomous System ID number.
- :type node: dict
- :type ip_address: str
- :type port: int
- :type as_number: int
- :raises HoneycombError: If modifying the configuration fails.
- """
-
- from resources.libraries.python.ssh import SSH
-
- config = {
- '\\"bgp-binding-address\\"': '\\"{0}\\"'.format(ip_address),
- '\\"bgp-port\\"': port,
- '\\"bgp-as-number\\"': as_number}
-
- path = "{0}/config/bgp.json".format(Const.REMOTE_HC_DIR)
-
- for key, value in config.items():
- find = key
- replace = '"{0}": "{1}",'.format(key, value)
-
- argument = '"/{0}/c\\ {1}"'.format(find, replace)
- command = "sed -i {0} {1}".format(argument, path)
-
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, stderr) = ssh.exec_command_sudo(command)
- if ret_code != 0:
- raise HoneycombError("Failed to modify configuration on "
- "node {0}, {1}".format(node, stderr))
-
- @staticmethod
- def compare_rib_tables(data, ref):
- """Compare provided RIB table with reference. All reference entries must
- be present in data. Data entries not present in reference are ignored.
-
- :param data: Data from Honeycomb node.
- :param ref: Reference data to compare against.
- :type data: dict
- :type ref: dict
- :raises HoneycombError: If the tables do not match.
- """
-
- # Remove runtime attributes from data
- for item in data:
- item.pop("attributes", "")
-
- for item in ref:
- if item not in data:
- raise HoneycombError(
- "RIB entry {0} not found in operational data {1}."
- .format(item, data))
diff --git a/resources/libraries/python/honeycomb/DHCP.py b/resources/libraries/python/honeycomb/DHCP.py
deleted file mode 100644
index 56cfdb2a78..0000000000
--- a/resources/libraries/python/honeycomb/DHCP.py
+++ /dev/null
@@ -1,110 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Keywords to manipulate NAT configuration using Honeycomb REST API."""
-
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import DataRepresentation
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-
-
-class DHCPRelayKeywords(object):
- """Keywords for NAT configuration."""
-
- def __init__(self):
- pass
-
- @staticmethod
- def _set_dhcp_relay_properties(node, path, data=None):
- """Set DHCP relay properties and check the return code.
-
- :param node: Honeycomb node.
- :param path: Path which is added to the base path to identify the data.
- :param data: The new data to be set. If None, the item will be removed.
- :type node: dict
- :type path: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response is not
- 200 = OK or 201 = ACCEPTED.
- """
-
- if data:
- status_code, resp = HcUtil. \
- put_honeycomb_data(node, "config_dhcp_relay", data, path,
- data_representation=DataRepresentation.JSON)
- else:
- status_code, resp = HcUtil. \
- delete_honeycomb_data(node, "config_dhcp_relay", path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of DHCP relay was not successful. "
- "Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def add_dhcp_relay(node, data, ip_version, entry_id):
- """Add a DHCP relay entry to the list on entries.
-
- :param node: Honeycomb node.
- :param data: Configuration for the relay entry.
- :param ip_version: IP protocol version, ipv4 or ipv6.
- :param entry_id: Numeric ID.
- :type node: dict
- :type data: dict
- :type ip_version: str
- :type entry_id: int
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/relay/vpp-fib-table-management:{0}/{1}".format(ip_version,
- entry_id)
-
- return DHCPRelayKeywords._set_dhcp_relay_properties(node, path, data)
-
- @staticmethod
- def clear_dhcp_relay_configuration(node):
- """Remove all DHCP relay configuration from the node.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Content of response.
- :rtype: bytearray
- """
- return DHCPRelayKeywords._set_dhcp_relay_properties(node, "")
-
- @staticmethod
- def get_dhcp_relay_oper_data(node):
- """Get operational data about the DHCP relay feature.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response is not 200 = OK.
- """
-
- status_code, resp = HcUtil. \
- get_honeycomb_data(node, "config_dhcp_relay")
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Could not retrieve DHCP relay configuration. "
- "Status code: {0}.".format(status_code))
- return resp
diff --git a/resources/libraries/python/honeycomb/FIB.py b/resources/libraries/python/honeycomb/FIB.py
deleted file mode 100644
index bfccf5a029..0000000000
--- a/resources/libraries/python/honeycomb/FIB.py
+++ /dev/null
@@ -1,139 +0,0 @@
-# Copyright (c) 2018 Bell Canada, Pantheon Technologies and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This module implements keywords to manipulate FIB tables using
-Honeycomb REST API."""
-
-from robot.api import logger
-
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import DataRepresentation
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-
-
-class FibKeywords(object):
- """Implementation of keywords which make it possible to:
- - add/remove FIB tables,
- - add/remove FIB table entries
- - get operational data about FIB tables,
- """
-
- def __init__(self):
- pass
-
- @staticmethod
- def _set_fib_table_properties(node, path, data=None):
- """Set FIB table properties and check the return code.
-
- :param node: Honeycomb node.
- :param path: Path which is added to the base path to identify the data.
- :param data: The new data to be set. If None, the item will be removed.
- :type node: dict
- :type path: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response is not
- 200 = OK.
- """
-
- if data:
- status_code, resp = HcUtil. \
- put_honeycomb_data(node, "config_fib_table", data, path,
- data_representation=DataRepresentation.JSON)
- else:
- status_code, resp = HcUtil. \
- delete_honeycomb_data(node, "config_fib_table", path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- if data is None and '"error-tag":"data-missing"' in resp:
- logger.debug("data does not exist in path.")
- else:
- raise HoneycombError(
- "The configuration of FIB table was not successful. "
- "Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def configure_fib_table(node, ip_version, vrf=1):
- """Configure a FIB table according to the data provided.
-
- :param node: Honeycomb node.
- :param ip_version: IP protocol version, ipv4 or ipv6.
- :param vrf: vrf-id to attach configuration to.
- :type node: dict
- :type ip_version: str
- :type vrf: int
- :returns: Content of response.
- :rtype: bytearray
- """
- full_data = {
- "vpp-fib-table-management:table": [
- {
- "table-id": vrf,
- "address-family": "vpp-fib-table-management:{0}"
- .format(ip_version),
- "name": "{0}-VRF:{1}".format(ip_version, vrf)
- }
- ]
- }
- path = "/table/{0}/vpp-fib-table-management:{1}".format(vrf, ip_version)
- return FibKeywords._set_fib_table_properties(node, path, full_data)
-
- @staticmethod
- def delete_fib_table(node, ip_version, vrf=1):
- """Delete the specified FIB table from configuration data.
-
- :param node: Honeycomb node.
- :param ip_version: IP protocol version, ipv4 or ipv6.
- :param vrf: vrf-id to attach configuration to.
- :type node: dict
- :type ip_version: str
- :type vrf: int
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/table/{0}/vpp-fib-table-management:{1}".format(vrf, ip_version)
- return FibKeywords._set_fib_table_properties(node, path)
-
- @staticmethod
- def get_fib_table_oper(node, ip_version, vrf=1):
- """Retrieve operational data about the specified FIB table.
-
- :param node: Honeycomb node.
- :param ip_version: IP protocol version, ipv4 or ipv6.
- :param vrf: vrf-id to attach configuration to.
- :type node: dict
- :type ip_version: str
- :type vrf: int
- :returns: FIB table operational data.
- :rtype: list
- :raises HoneycombError: If the operation fails.
- """
-
- path = "/table/{0}/vpp-fib-table-management:{1}".format(vrf, ip_version)
- status_code, resp = HcUtil. \
- get_honeycomb_data(node, "oper_fib_table", path)
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational information about the "
- "FIB tables. Status code: {0}.".format(status_code))
-
- data = resp['vpp-fib-table-management:table'][0]
-
- return data
diff --git a/resources/libraries/python/honeycomb/HcAPIKwACL.py b/resources/libraries/python/honeycomb/HcAPIKwACL.py
deleted file mode 100644
index b2848411a1..0000000000
--- a/resources/libraries/python/honeycomb/HcAPIKwACL.py
+++ /dev/null
@@ -1,374 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This module implements keywords to manipulate ACL data structures using
-Honeycomb REST API."""
-
-
-from robot.api import logger
-
-from resources.libraries.python.topology import Topology
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import DataRepresentation
-
-
-class ACLKeywords(object):
- """Implementation of keywords which make it possible to:
- - add classify table(s),
- - remove classify table(s),
- - get operational data about classify table(s),
- - add classify session(s),
- - remove classify session(s),
- - get operational data about classify sessions(s).
- """
-
- def __init__(self):
- pass
-
- @staticmethod
- def _set_classify_table_properties(node, path, data=None):
- """Set classify table properties and check the return code.
-
- :param node: Honeycomb node.
- :param path: Path which is added to the base path to identify the data.
- :param data: The new data to be set. If None, the item will be removed.
- :type node: dict
- :type path: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response to PUT is not
- 200 = OK.
- """
-
- if data:
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_classify_table", data, path,
- data_representation=DataRepresentation.JSON)
- else:
- status_code, resp = HcUtil.\
- delete_honeycomb_data(node, "config_classify_table", path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- if data is None and '"error-tag":"data-missing"' in resp:
- logger.debug("data does not exist in path.")
- else:
- raise HoneycombError(
- "The configuration of classify table was not successful. "
- "Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def add_classify_table(node, table):
- """Add a classify table to the list of classify tables. The keyword does
- not validate given data.
-
- :param node: Honeycomb node.
- :param table: Classify table to be added.
- :type node: dict
- :type table: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/classify-table/" + table["name"]
- data = {"classify-table": [table, ]}
- return ACLKeywords._set_classify_table_properties(node, path, data)
-
- @staticmethod
- def remove_all_classify_tables(node):
- """Remove all classify tables defined on the node.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- return ACLKeywords._set_classify_table_properties(node, path="")
-
- @staticmethod
- def remove_classify_table(node, table_name):
- """Remove the given classify table.
-
- :param node: Honeycomb node.
- :param table_name: Name of the classify table to be removed.
- :type node: dict
- :type table_name: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/classify-table/" + table_name
- return ACLKeywords._set_classify_table_properties(node, path)
-
- @staticmethod
- def get_all_classify_tables_oper_data(node):
- """Get operational data about all classify tables present on the node.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: List of classify tables.
- :rtype: list
- """
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "oper_classify_table")
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational information about the "
- "classify tables. Status code: {0}.".format(status_code))
-
- return resp["vpp-classifier-state"]["classify-table"]
-
- @staticmethod
- def get_classify_table_oper_data(node, table_name):
- """Get operational data about the given classify table.
-
- :param node: Honeycomb node.
- :param table_name: Name of the classify table.
- :type node: dict
- :type table_name: str
- :returns: Operational data about the given classify table.
- :rtype: dict
- """
-
- tables = ACLKeywords.get_all_classify_tables_oper_data(node)
- for table in tables:
- if table["name"] == table_name:
- return table
- raise HoneycombError("Table {0} not found in ACL table list.".format(
- table_name))
-
- @staticmethod
- def get_all_classify_tables_cfg_data(node):
- """Get configuration data about all classify tables present on the node.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: List of classify tables.
- :rtype: list
- """
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "config_classify_table")
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational information about the "
- "classify tables. Status code: {0}.".format(status_code))
- try:
- return resp["vpp-classifier"]["classify-table"]
- except (KeyError, TypeError):
- return []
-
- @staticmethod
- def add_classify_session(node, table_name, session):
- """Add a classify session to the classify table.
-
- :param node: Honeycomb node.
- :param table_name: Name of the classify table.
- :param session: Classify session to be added to the classify table.
- :type node: dict
- :type table_name: str
- :type session: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/classify-table/" + table_name + \
- "/classify-session/" + session["match"]
- data = {"classify-session": [session, ]}
- return ACLKeywords._set_classify_table_properties(node, path, data)
-
- @staticmethod
- def remove_classify_session(node, table_name, session_match):
- """Remove the given classify session from the classify table.
-
- :param node: Honeycomb node.
- :param table_name: Name of the classify table.
- :param session_match: Classify session match.
- :type node: dict
- :type table_name: str
- :type session_match: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/classify-table/" + table_name + \
- "/classify-session/" + session_match
- return ACLKeywords._set_classify_table_properties(node, path)
-
- @staticmethod
- def get_all_classify_sessions_oper_data(node, table_name):
- """Get operational data about all classify sessions in the classify
- table.
-
- :param node: Honeycomb node.
- :param table_name: Name of the classify table.
- :type node: dict
- :type table_name: str
- :returns: List of classify sessions present in the classify table.
- :rtype: list
- """
-
- table_data = ACLKeywords.get_classify_table_oper_data(node, table_name)
-
- return table_data["classify-session"]
-
- @staticmethod
- def get_classify_session_oper_data(node, table_name, session_match):
- """Get operational data about the given classify session in the classify
- table.
-
- :param node: Honeycomb node.
- :param table_name: Name of the classify table.
- :param session_match: Classify session match.
- :type node: dict
- :type table_name: str
- :type session_match: str
- :returns: Classify session operational data.
- :rtype: dict
- :raises HoneycombError: If no session the specified match Id is found.
- """
-
- sessions = ACLKeywords.get_all_classify_sessions_oper_data(
- node, table_name)
- for session in sessions:
- if session["match"] == session_match:
- return session
- raise HoneycombError(
- "Session with match value \"{0}\" not found"
- " under ACL table {1}.".format(session_match, table_name))
-
- @staticmethod
- def create_acl_plugin_classify_chain(node, list_name, data):
- """Create classify chain using the ietf-acl node.
-
- :param node: Honeycomb node.
- :param list_name: Name for the classify list.
- :param data: Dictionary of settings to send to Honeycomb.
- :type node: dict
- :type list_name: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the operation fails.
- """
-
- path = "/acl/{0}".format(list_name)
-
- status_code, resp = HcUtil.put_honeycomb_data(
- node, "config_plugin_acl", data, path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Could not create classify chain."
- "Status code: {0}.".format(status_code))
-
- return resp
-
- @staticmethod
- def set_acl_plugin_interface(node, interface, acl_name, direction):
- """Assign an interface to an ietf-acl classify chain.
-
- :param node: Honeycomb node.
- :param interface: Name of an interface on the node.
- :param acl_name: Name of an ACL chain configured through ACL-plugin.
- :param direction: Classify incoming or outgoing packets.
- Valid options are: ingress, egress
- :type node: dict
- :type interface: str or int
- :type acl_name: str
- :type direction: str
- :returns: Content of response.
- :rtype: bytearray
- :raises ValueError: If the direction argument is incorrect.
- :raises HoneycombError: If the operation fails.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- interface = interface.replace("/", "%2F")
-
- if direction not in ("ingress", "egress"):
- raise ValueError("Unknown traffic direction {0}. "
- "Valid options are: ingress, egress."
- .format(direction))
-
- path = "/attachment-points/interface/{0}/{1}/acl-sets/".format(
- interface, direction)
-
- data = {
- "acl-sets": {
- "acl-set": {
- "name": acl_name
- }
- }
- }
-
- status_code, resp = HcUtil.put_honeycomb_data(
- node, "config_plugin_acl", data, path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Could not configure ACL on interface. "
- "Status code: {0}.".format(status_code))
-
- return resp
-
- @staticmethod
- def delete_interface_plugin_acls(node, interface):
- """Remove all plugin-acl assignments from an interface.
-
- :param node: Honeycomb node.
- :param interface: Name of an interface on the node.
- :type node: dict
- :type interface: str or int
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- interface = interface.replace("/", "%2F")
-
- path = "/attachment-points/interface/{0}/".format(interface)
- status_code, _ = HcUtil.delete_honeycomb_data(
- node, "config_plugin_acl", path)
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Could not remove ACL assignment from interface. "
- "Status code: {0}.".format(status_code))
-
- @staticmethod
- def delete_acl_plugin_classify_chains(node):
- """Remove all plugin-ACL classify chains.
-
- :param node: Honeycomb node.
- :type node: dict
- """
-
- status_code, _ = HcUtil.delete_honeycomb_data(
- node, "config_plugin_acl")
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Could not remove plugin-acl chain. "
- "Status code: {0}.".format(status_code))
diff --git a/resources/libraries/python/honeycomb/HcAPIKwBridgeDomain.py b/resources/libraries/python/honeycomb/HcAPIKwBridgeDomain.py
deleted file mode 100644
index 576124794c..0000000000
--- a/resources/libraries/python/honeycomb/HcAPIKwBridgeDomain.py
+++ /dev/null
@@ -1,482 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Keywords to manipulate bridge domain configuration using Honeycomb REST API.
-
-The keywords make possible to put and get configuration data and to get
-operational data.
-"""
-
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import DataRepresentation
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-
-
-class BridgeDomainKeywords(object):
- """Keywords to manipulate bridge domain configuration.
-
- Implements keywords which get configuration and operational data about
- bridge domains and put the bridge domains' parameters using Honeycomb REST
- API.
- """
-
- PARAMS = ("flood", "forward", "learn", "unknown-unicast-flood",
- "arp-termination")
-
- def __init__(self):
- pass
-
- @staticmethod
- def _configure_bd(node, bd_name, data,
- data_representation=DataRepresentation.JSON):
- """Send bridge domain configuration data and check the response.
-
- :param node: Honeycomb node.
- :param bd_name: The name of bridge domain.
- :param data: Configuration data to be sent in PUT request.
- :param data_representation: How the data is represented.
- :type node: dict
- :type bd_name: str
- :type data: dict
- :type data_representation: DataRepresentation
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response on PUT is not
- 200 = OK.
- """
-
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_bridge_domain", data,
- data_representation=data_representation)
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of bridge domain '{0}' was not successful. "
- "Status code: {1}.".format(bd_name, status_code))
- return resp
-
- @staticmethod
- def _set_bd_properties(node, bd_name, path, new_value=None):
- """Set bridge domain properties.
-
- This method reads bridge domain configuration data, creates, changes or
- removes the requested data and puts it back to Honeycomb.
-
- :param node: Honeycomb node.
- :param bd_name: The name of bridge domain.
- :param path: Path to data we want to change, create or remove.
- :param new_value: The new value to be set. If None, the item will be
- removed.
- :type node: dict
- :type bd_name: str
- :type path: tuple
- :type new_value: str, dict or list
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If it is not possible to get or set the data.
- """
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "config_bridge_domain")
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Not possible to get configuration information about the "
- "bridge domains. Status code: {0}.".format(status_code))
-
- if new_value:
- new_data = HcUtil.set_item_value(resp, path, new_value)
- else:
- new_data = HcUtil.remove_item(resp, path)
-
- return BridgeDomainKeywords._configure_bd(node, bd_name, new_data)
-
- @staticmethod
- def _create_bd_structure(bd_name, **kwargs):
- """Create the bridge domain data structure as it is expected by
- Honeycomb REST API.
-
- :param bd_name: Bridge domain name.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in BridgeDomainKeywords.PARAMS.
- :type bd_name: str
- :type kwargs: dict
- :returns: Bridge domain data structure.
- :rtype: dict
- """
-
- bd_structure = {"name": bd_name}
-
- for param, value in kwargs.items():
- if param not in BridgeDomainKeywords.PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".
- format(param))
- bd_structure[param] = str(value)
-
- return bd_structure
-
- @staticmethod
- def get_all_bds_cfg_data(node):
- """Get configuration data about all bridge domains from Honeycomb.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Configuration data about all bridge domains from Honeycomb.
- :rtype: list
- :raises HoneycombError: If it is not possible to get configuration data.
- """
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "config_bridge_domain")
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get configuration information about the "
- "bridge domains. Status code: {0}.".format(status_code))
- try:
- return resp["bridge-domains"]["bridge-domain"]
-
- except (KeyError, TypeError):
- return []
-
- @staticmethod
- def get_bd_cfg_data(node, bd_name):
- """Get configuration data about the given bridge domain from Honeycomb.
-
- :param node: Honeycomb node.
- :param bd_name: The name of bridge domain.
- :type node: dict
- :type bd_name: str
- :returns: Configuration data about the given bridge domain from
- Honeycomb.
- :rtype: dict
- """
-
- intfs = BridgeDomainKeywords.get_all_bds_cfg_data(node)
- for intf in intfs:
- if intf["name"] == bd_name:
- return intf
- return {}
-
- @staticmethod
- def get_all_bds_oper_data(node):
- """Get operational data about all bridge domains from Honeycomb.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Operational data about all bridge domains from Honeycomb.
- :rtype: list
- :raises HoneycombError: If it is not possible to get operational data.
- """
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "oper_bridge_domains")
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational information about the "
- "bridge domains. Status code: {0}.".format(status_code))
- try:
- return resp["bridge-domains-state"]["bridge-domain"]
-
- except (KeyError, TypeError):
- return []
-
- @staticmethod
- def get_bd_oper_data(node, bd_name):
- """Get operational data about the given bridge domain from Honeycomb.
-
- :param node: Honeycomb node.
- :param bd_name: The name of bridge domain.
- :type node: dict
- :type bd_name: str
- :returns: Operational data about the given bridge domain from Honeycomb.
- :rtype: dict
- """
-
- intfs = BridgeDomainKeywords.get_all_bds_oper_data(node)
- for intf in intfs:
- if intf["name"] == bd_name:
- return intf
- return {}
-
- @staticmethod
- def add_first_bd(node, bd_name, **kwargs):
- """Add the first bridge domain.
-
- If there are any other bridge domains configured, they will be removed.
-
- :param node: Honeycomb node.
- :param bd_name: Bridge domain name.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in BridgeDomainKeywords.PARAMS
- :type node: dict
- :type bd_name: str
- :type kwargs: dict
- :returns: Bridge domain data structure.
- :rtype: dict
- """
-
- new_bd = BridgeDomainKeywords._create_bd_structure(bd_name, **kwargs)
- bridge_domain = {"bridge-domains": {"bridge-domain": [new_bd, ]}}
- return BridgeDomainKeywords._configure_bd(node, bd_name, bridge_domain)
-
- @staticmethod
- def add_bd(node, bd_name, **kwargs):
- """Add a bridge domain.
-
- :param node: Honeycomb node.
- :param bd_name: Bridge domain name.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in BridgeDomainKeywords.PARAMS
- :type node: dict
- :type bd_name: str
- :type kwargs: dict
- :returns: Bridge domain data structure.
- :rtype: dict
- """
-
- path = ("bridge-domains", "bridge-domain")
- new_bd = BridgeDomainKeywords._create_bd_structure(bd_name, **kwargs)
- bridge_domain = [new_bd, ]
- return BridgeDomainKeywords._set_bd_properties(node, bd_name, path,
- bridge_domain)
-
- @staticmethod
- def remove_all_bridge_domains(node):
- """Remove all bridge domains.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If it is not possible to remove all bridge
- domains.
- """
-
- data = {"bridge-domains": {"bridge-domain": []}}
-
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_bridge_domain", data)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError("Not possible to remove all bridge domains. "
- "Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def remove_bridge_domain(node, bd_name):
- """Remove a bridge domain.
-
- :param node: Honeycomb node.
- :param bd_name: The name of bridge domain to be removed.
- :type node: dict
- :type bd_name: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If it is not possible to remove the bridge
- domain.
- """
-
- path = ("bridge-domains", ("bridge-domain", "name", bd_name))
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "config_bridge_domain")
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get configuration information about the "
- "bridge domains. Status code: {0}.".format(status_code))
-
- new_data = HcUtil.remove_item(resp, path)
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_bridge_domain", new_data)
- if status_code != HTTPCodes.OK:
- raise HoneycombError("Not possible to remove bridge domain {0}. "
- "Status code: {1}.".
- format(bd_name, status_code))
- return resp
-
- @staticmethod
- def configure_bridge_domain(node, bd_name, param, value):
- """Configure a bridge domain.
-
- :param node: Honeycomb node.
- :param bd_name: Bridge domain name.
- :param param: Parameter to set, change or remove. The accepted
- parameters are defined in BridgeDomainKeywords.PARAMS
- :param value: The new value to be set, change or remove. If None, the
- item will be removed.
- :type node: dict
- :type bd_name: str
- :type param: str
- :type value: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- if param not in BridgeDomainKeywords.PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".format(param))
-
- path = ("bridge-domains", ("bridge-domain", "name", bd_name), param)
- return BridgeDomainKeywords.\
- _set_bd_properties(node, bd_name, path, value)
-
- @staticmethod
- def add_l2_fib_entry(node, bd_name, l2_fib_entry):
- """Add an L2 FIB entry to the bridge domain's list of L2 FIB entries.
-
- :param node: Honeycomb node.
- :param bd_name: Bridge domain's name.
- :param l2_fib_entry: L2 FIB entry to be added to the L2 FIB table.
- :type node: dict
- :type bd_name: str
- :type l2_fib_entry: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = ("bridge-domains",
- ("bridge-domain", "name", bd_name),
- "l2-fib-table",
- "l2-fib-entry")
-
- new_l2_fib_entry = [l2_fib_entry, ]
- return BridgeDomainKeywords._set_bd_properties(
- node, bd_name, path, new_l2_fib_entry)
-
- @staticmethod
- def modify_l2_fib_entry(node, bd_name, mac, param, value):
- """Modify an existing L2 FIB entry in the bridge domain's L2 FIB table.
- The L2 FIB entry is specified by MAC address.
-
- :param node: Honeycomb node.
- :param bd_name: Bridge domain's name.
- :param mac: MAC address used as the key in L2 FIB data structure.
- :param param: The parameter to be modified.
- :param value: The new value of the parameter.
- :type node: dict
- :type bd_name: str
- :type mac: str
- :type param: str
- :type value: str or int
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = ("bridge-domains",
- ("bridge-domain", "name", bd_name),
- "l2-fib-table",
- ("l2-fib-entry", "phys-address", mac),
- param)
-
- return BridgeDomainKeywords._set_bd_properties(
- node, bd_name, path, value)
-
- @staticmethod
- def remove_l2_fib_entry(node, bd_name, mac):
- """Remove an L2 FIB entry from bridge domain's L2 FIB table. The
- entry is specified by MAC address.
-
- :param node: Honeycomb node.
- :param bd_name: Bridge domain's name.
- :param mac: MAC address used as the key in L2 FIB data structure.
- :type node: dict
- :type bd_name: str
- :type mac: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If it is not possible to remove the specified
- entry.
- """
-
- path = ("bridge-domains",
- ("bridge-domain", "name", bd_name),
- "l2-fib-table",
- ("l2-fib-entry", "phys-address", str(mac)))
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "config_bridge_domain")
- if status_code != HTTPCodes.OK:
- raise HoneycombError("Not possible to get configuration information"
- " about the L2 FIB entry {0} from bridge "
- "domain {1}. Status code: {2}.".
- format(mac, bd_name, status_code))
-
- new_data = HcUtil.remove_item(resp, path)
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_bridge_domain", new_data)
- if status_code != HTTPCodes.OK:
- raise HoneycombError("Not possible to remove L2 FIB entry {0} from "
- "bridge domain {1}. Status code: {2}.".
- format(mac, bd_name, status_code))
- return resp
-
-
- @staticmethod
- def remove_all_l2_fib_entries(node, bd_name):
- """Remove all entries from the bridge domain's L2 FIB table.
-
- :param node: Honeycomb node.
- :param bd_name: Bridge domain's name.
- :type node: dict
- :type bd_name: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = ("bridge-domains",
- ("bridge-domain", "name", bd_name),
- "l2-fib-table")
-
- return BridgeDomainKeywords._set_bd_properties(
- node, bd_name, path, None)
-
- @staticmethod
- def get_all_l2_fib_entries(node, bd_name):
- """Retrieves all entries from the bridge domain's L2 FIB table.
-
- :param node: Honeycomb node.
- :param bd_name: Bridge domain's name.
- :type node: dict
- :type bd_name: str
- :returns: Bridge domain's L2 FIB table or empty list if the table does
- not exist or it is empty.
- :rtype: list
- """
-
- bd_data = BridgeDomainKeywords.get_bd_oper_data(node, bd_name)
- try:
- return bd_data["l2-fib-table"]["l2-fib-entry"]
- except KeyError:
- return []
-
- @staticmethod
- def get_l2_fib_entry(node, bd_name, mac):
- """Retrieves an entry from bridge domain's L2 FIB table. The entry is
- specified by MAC address.
-
- :param node: Honeycomb node.
- :param bd_name: Bridge domain's name.
- :param mac: MAC address used as the key in L2 FIB data structure.
- :type node: dict
- :type bd_name: str
- :type mac: str
- :returns: The requested entry from bridge domain's L2 FIB table or empty
- dictionary if it does not exist in the L2 FIB table.
- :rtype: dict
- """
-
- l2_fib = BridgeDomainKeywords.get_all_l2_fib_entries(node, bd_name)
- for entry in l2_fib:
- if entry["phys-address"] == mac:
- return entry
- return {}
diff --git a/resources/libraries/python/honeycomb/HcAPIKwInterfaces.py b/resources/libraries/python/honeycomb/HcAPIKwInterfaces.py
deleted file mode 100644
index 662fedca10..0000000000
--- a/resources/libraries/python/honeycomb/HcAPIKwInterfaces.py
+++ /dev/null
@@ -1,1908 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Keywords to manipulate interface configuration using Honeycomb REST API.
-
-The keywords make possible to put and get configuration data and to get
-operational data.
-"""
-from robot.api import logger
-
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import DataRepresentation
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-from resources.libraries.python.topology import Topology
-
-
-class InterfaceKeywords(object):
- """Keywords for Interface manipulation.
-
- Implements keywords which get configuration and operational data about
- vpp interfaces and set the interface's parameters using Honeycomb REST API.
- """
-
- INTF_PARAMS = ("name", "description", "type", "enabled",
- "link-up-down-trap-enable", "v3po:l2", "v3po:vxlan-gpe",
- "vpp-vlan:sub-interfaces")
- IPV4_PARAMS = ("enabled", "forwarding", "mtu")
- IPV6_PARAMS = ("enabled", "forwarding", "mtu", "dup-addr-detect-transmits")
- IPV6_AUTOCONF_PARAMS = ("create-global-addresses",
- "create-temporary-addresses",
- "temporary-valid-lifetime",
- "temporary-preferred-lifetime")
- ETH_PARAMS = ("mtu", )
- ROUTING_PARAMS = ("ipv4-vrf-id", "ipv6-vrf-id")
- VXLAN_PARAMS = ("src", "dst", "vni", "encap-vrf-id")
- L2_PARAMS = ("bridge-domain", "split-horizon-group",
- "bridged-virtual-interface")
- TAP_PARAMS = ("id", "tx-ring-size", "rx-ring-size", "host-mac",
- "host-interface-name", "host-namespace", "host-bridge",
- "host-ipv4-address", "host-ipv6-address", "tag",
- "host-ipv4-gateway", "host-ipv6-gateway", "mac")
- VHOST_USER_PARAMS = ("socket", "role")
- SUB_IF_PARAMS = ("identifier",
- "vlan-type",
- "enabled")
- SUB_IF_MATCH = ("default",
- "untagged",
- "vlan-tagged",
- "vlan-tagged-exact-match")
- BD_PARAMS = ("bridge-domain",
- "split-horizon-group",
- "bridged-virtual-interface")
- VXLAN_GPE_PARAMS = ("local",
- "remote",
- "vni",
- "next-protocol",
- "encap-vrf-id",
- "decap-vrf-id")
-
- def __init__(self):
- pass
-
- @staticmethod
- def _configure_interface(node, interface, data,
- data_representation=DataRepresentation.JSON):
- """Send interface configuration data and check the response.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param data: Configuration data to be sent in PUT request.
- :param data_representation: How the data is represented.
- :type node: dict
- :type interface: str
- :type data: dict
- :type data_representation: DataRepresentation
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response on PUT is not
- 200 = OK.
- """
-
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_vpp_interfaces", data,
- data_representation=data_representation)
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of interface '{0}' was not successful. "
- "Status code: {1}.".format(interface, status_code))
- return resp
-
- @staticmethod
- def get_all_interfaces_cfg_data(node):
- """Get configuration data about all interfaces from Honeycomb.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Configuration data about all interfaces from Honeycomb.
- :rtype: list
- :raises HoneycombError: If it is not possible to get configuration data.
- """
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "config_vpp_interfaces")
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get configuration information about the "
- "interfaces. Status code: {0}.".format(status_code))
- try:
- return resp["interfaces"]["interface"]
-
- except (KeyError, TypeError):
- return []
-
- @staticmethod
- def get_interface_cfg_data(node, interface):
- """Get configuration data about the given interface from Honeycomb.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :type node: dict
- :type interface: str
- :returns: Configuration data about the given interface from Honeycomb.
- :rtype: dict
- """
-
- intfs = InterfaceKeywords.get_all_interfaces_cfg_data(node)
- for intf in intfs:
- if intf["name"] == interface:
- return intf
- return {}
-
- @staticmethod
- def get_all_interfaces_oper_data(node):
- """Get operational data about all interfaces from Honeycomb.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Operational data about all interfaces from Honeycomb.
- :rtype: list
- :raises HoneycombError: If it is not possible to get operational data.
- """
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "oper_vpp_interfaces")
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational information about the "
- "interfaces. Status code: {0}.".format(status_code))
- try:
- return resp["interfaces"]["interface"]
-
- except (KeyError, TypeError):
- return []
-
- @staticmethod
- def get_disabled_interfaces_oper_data(node):
- """Get operational data about all disabled interfaces from Honeycomb.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Operational data about disabled interfaces.
- :rtype: list
- :raises HoneycombError: If it is not possible to get operational data.
- """
-
- status_code, resp = HcUtil. \
- get_honeycomb_data(node, "oper_disabled_interfaces")
- if status_code == HTTPCodes.NOT_FOUND:
- raise HoneycombError(
- "No disabled interfaces present on node."
- )
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational information about the "
- "interfaces. Status code: {0}.".format(status_code))
- try:
- return resp["disabled-interfaces"]["disabled-interface-index"]
-
- except (KeyError, TypeError):
- return []
-
- @staticmethod
- def get_interface_oper_data(node, interface):
- """Get operational data about the given interface from Honeycomb.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :type node: dict
- :type interface: str
- :returns: Operational data about the given interface from Honeycomb.
- :rtype: dict
- """
-
- try:
- interface = Topology.convert_interface_reference(
- node, interface, "name")
- except RuntimeError:
- if isinstance(interface, basestring):
- # Probably name of a custom interface (TAP, VxLAN, Vhost, ...)
- pass
- else:
- raise
-
- intfs = InterfaceKeywords.get_all_interfaces_oper_data(node)
- for intf in intfs:
- if intf["name"] == interface:
- return intf
- return {}
-
- @staticmethod
- def _set_interface_properties(node, interface, path, new_value=None):
- """Set interface properties.
-
- This method reads interface configuration data, creates, changes or
- removes the requested data and puts it back to Honeycomb.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param path: Path to data we want to change / create / remove.
- :param new_value: The new value to be set. If None, the item will be
- removed.
- :type node: dict
- :type interface: str
- :type path: tuple
- :type new_value: str, dict or list
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If it is not possible to get or set the data.
- """
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "config_vpp_interfaces")
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get configuration information about the "
- "interfaces. Status code: {0}.".format(status_code))
-
- if new_value:
- new_data = HcUtil.set_item_value(resp, path, new_value)
- else:
- new_data = HcUtil.remove_item(resp, path)
- return InterfaceKeywords._configure_interface(node, interface, new_data)
-
- @staticmethod
- def honeycomb_set_interface_state(node, interface, state="up"):
- """Set VPP interface state.
-
- The keyword changes the administration state of interface to up or down
- depending on the parameter "state".
-
- :param node: Honeycomb node.
- :param interface: Interface name, key, link name or sw_if_index.
- :param state: The requested state, only "up" and "down" are valid
- values.
- :type node: dict
- :type interface: str
- :type state: str
- :returns: Content of response.
- :rtype: bytearray
- :raises KeyError: If the argument "state" is nor "up" or "down".
- :raises HoneycombError: If the interface is not present on the node.
- """
-
- intf_state = {"up": "true",
- "down": "false"}
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- intf = interface.replace("/", "%2F")
- path = "/interface/{0}".format(intf)
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "config_vpp_interfaces", path)
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get configuration information about the "
- "interfaces. Status code: {0}.".format(status_code))
-
- resp["interface"][0]["enabled"] = intf_state[state.lower()]
-
- status_code, resp = HcUtil. \
- put_honeycomb_data(node, "config_vpp_interfaces", resp, path,
- data_representation=DataRepresentation.JSON)
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of interface '{0}' was not successful. "
- "Status code: {1}.".format(interface, status_code))
- return resp
-
- @staticmethod
- def set_interface_up(node, interface):
- """Set the administration state of VPP interface to up.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :type node: dict
- :type interface: str
- :returns: Content of response
- :rtype: bytearray
- """
-
- return InterfaceKeywords.honeycomb_set_interface_state(
- node, interface, "up")
-
- @staticmethod
- def set_interface_down(node, interface):
- """Set the administration state of VPP interface to down.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :type node: dict
- :type interface: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- return InterfaceKeywords.honeycomb_set_interface_state(
- node, interface, "down")
-
- @staticmethod
- def add_bridge_domain_to_interface(node, interface, bd_name,
- split_horizon_group=None, bvi=None):
- """Add a new bridge domain to an interface and set its parameters.
-
- :param node: Honeycomb node.
- :param interface: Interface name, key, link name or sw_if_index.
- :param bd_name: Bridge domain name.
- :param split_horizon_group: Split-horizon group name.
- :param bvi: The bridged virtual interface.
- :type node: dict
- :type interface: str
- :type bd_name: str
- :type split_horizon_group: str
- :type bvi: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the interface is not present on the node.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- v3po_l2 = {"bridge-domain": str(bd_name)}
- if split_horizon_group:
- v3po_l2["split-horizon-group"] = str(split_horizon_group)
- if bvi:
- v3po_l2["bridged-virtual-interface"] = str(bvi)
-
- path = ("interfaces", ("interface", "name", str(interface)), "v3po:l2")
-
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, v3po_l2)
-
- @staticmethod
- def remove_bridge_domain_from_interface(node, interface):
- """Remove bridge domain assignment from interface.
-
- :param node: Honeycomb node.
- :param interface: Interface name, key, link name or sw_if_index.
- :type node: dict
- :type interface: str or int
- :raises HoneycombError: If the operation fails.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- intf = interface.replace("/", "%2F")
-
- path = "/interface/{0}/v3po:l2".format(intf)
-
- status_code, response = HcUtil.delete_honeycomb_data(
- node, "config_vpp_interfaces", path)
-
- if status_code != HTTPCodes.OK:
- if '"error-tag":"data-missing"' in response:
- logger.debug("Data does not exist in path.")
- else:
- raise HoneycombError(
- "Could not remove bridge domain assignment from interface "
- "'{0}'. Status code: {1}.".format(interface, status_code))
-
- @staticmethod
- def get_bd_oper_data_from_interface(node, interface):
- """Returns operational data about bridge domain settings in the
- interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :type node: dict
- :type interface: str
- :returns: Operational data about bridge domain settings in the
- interface.
- :rtype: dict
- """
-
- if_data = InterfaceKeywords.get_interface_oper_data(node, interface)
-
- if if_data:
- try:
- return if_data["v3po:l2"]
- except KeyError:
- return {}
- return {}
-
- @staticmethod
- def configure_interface_base(node, interface, param, value):
- """Configure the base parameters of interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param param: Parameter to configure (set, change, remove)
- :param value: The value of parameter. If None, the parameter will be
- removed.
- :type node: dict
- :type interface: str
- :type param: str
- :type value: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- if param not in InterfaceKeywords.INTF_PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".format(param))
-
- path = ("interfaces", ("interface", "name", interface), param)
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, value)
-
- @staticmethod
- def configure_interface_ipv4(node, interface, param, value):
- """Configure IPv4 parameters of interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param param: Parameter to configure (set, change, remove)
- :param value: The value of parameter. If None, the parameter will be
- removed.
- :type node: dict
- :type interface: str
- :type param: str
- :type value: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- if param not in InterfaceKeywords.IPV4_PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".format(param))
-
- path = ("interfaces", ("interface", "name", interface),
- "ietf-ip:ipv4", param)
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, value)
-
- @staticmethod
- def add_first_ipv4_address(node, interface, ip_addr, network):
- """Add the first IPv4 address.
-
- If there are any other addresses configured, they will be removed.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param ip_addr: IPv4 address to be set.
- :param network: Netmask or length of network prefix.
- :type node: dict
- :type interface: str
- :type ip_addr: str
- :type network: str or int
- :returns: Content of response.
- :rtype: bytearray
- :raises ValueError: If the provided netmask or prefix is not valid.
- :raises HoneycombError: If the operation fails.
- """
-
- interface = InterfaceKeywords.handle_interface_reference(
- node, interface)
-
- path = "/interface/{0}/ietf-ip:ipv4".format(interface)
- if isinstance(network, basestring):
- data = {
- "ietf-ip:ipv4": {
- "address": [{"ip": ip_addr, "netmask": network}, ]}}
- elif isinstance(network, int) and (0 < network < 33):
- data = {
- "ietf-ip:ipv4": {
- "address": [{"ip": ip_addr, "prefix-length": network}, ]}}
- else:
- raise ValueError("Value {0} is not a valid netmask or network "
- "prefix length.".format(network))
- status_code, _ = HcUtil.put_honeycomb_data(
- node, "config_vpp_interfaces", data, path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Configuring IPv4 address failed. "
- "Status code:{0}".format(status_code))
-
- @staticmethod
- def add_ipv4_address(node, interface, ip_addr, network):
- """Add IPv4 address.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param ip_addr: IPv4 address to be set.
- :param network: Netmask or length of network prefix.
- :type node: dict
- :type interface: str
- :type ip_addr: str
- :type network: str or int
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the provided netmask or prefix is not valid.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4",
- "address")
- if isinstance(network, basestring):
- address = [{"ip": ip_addr, "netmask": network}]
- elif isinstance(network, int) and (0 < network < 33):
- address = [{"ip": ip_addr, "prefix-length": network}]
- else:
- raise HoneycombError("Value {0} is not a valid netmask or network "
- "prefix length.".format(network))
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, address)
-
- @staticmethod
- def remove_all_ipv4_addresses(node, interface):
- """Remove all IPv4 addresses from interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :type node: dict
- :type interface: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4",
- "address")
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, None)
-
- @staticmethod
- def add_ipv4_neighbor(node, interface, ip_addr, link_layer_address):
- """Add the IPv4 neighbour.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param ip_addr: IPv4 address of neighbour to be set.
- :param link_layer_address: Link layer address.
- :type node: dict
- :type interface: str
- :type ip_addr: str
- :type link_layer_address: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4",
- "neighbor")
- neighbor = [{"ip": ip_addr, "link-layer-address": link_layer_address}, ]
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, neighbor)
-
- @staticmethod
- def remove_all_ipv4_neighbors(node, interface):
- """Remove all IPv4 neighbours.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :type node: dict
- :type interface: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv4",
- "neighbor")
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, None)
-
- @staticmethod
- def configure_interface_ipv6(node, interface, param, value):
- """Configure IPv6 parameters of interface
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param param: Parameter to configure (set, change, remove)
- :param value: The value of parameter. If None, the parameter will be
- removed.
- :type node: dict
- :type interface: str
- :type param: str
- :type value: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- if param in InterfaceKeywords.IPV6_PARAMS:
- path = ("interfaces", ("interface", "name", interface),
- "ietf-ip:ipv6", param)
- elif param in InterfaceKeywords.IPV6_AUTOCONF_PARAMS:
- path = ("interfaces", ("interface", "name", interface),
- "ietf-ip:ipv6", "autoconf", param)
- else:
- raise HoneycombError("The parameter {0} is invalid.".format(param))
-
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, value)
-
- @staticmethod
- def add_first_ipv6_address(node, interface, ip_addr, prefix_len):
- """Add the first IPv6 address.
-
- If there are any other addresses configured, they will be removed.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param ip_addr: IPv6 address to be set.
- :param prefix_len: Prefix length.
- :type node: dict
- :type interface: str
- :type ip_addr: str
- :type prefix_len: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6")
- address = {"address": [{"ip": ip_addr, "prefix-length": prefix_len}, ]}
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, address)
-
- @staticmethod
- def add_ipv6_address(node, interface, ip_addr, prefix_len):
- """Add IPv6 address.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param ip_addr: IPv6 address to be set.
- :param prefix_len: Prefix length.
- :type node: dict
- :type interface: str
- :type ip_addr: str
- :type prefix_len: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6",
- "address")
- address = [{"ip": ip_addr, "prefix-length": prefix_len}, ]
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, address)
-
- @staticmethod
- def remove_all_ipv6_addresses(node, interface):
- """Remove all IPv6 addresses from interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :type node: dict
- :type interface: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6",
- "address")
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, None)
-
- @staticmethod
- def add_ipv6_neighbor(node, interface, ip_addr, link_layer_address):
- """Add the IPv6 neighbour.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param ip_addr: IPv6 address of neighbour to be set.
- :param link_layer_address: Link layer address.
- :type node: dict
- :type interface: str
- :type ip_addr: str
- :type link_layer_address: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6",
- "neighbor")
- neighbor = [{"ip": ip_addr, "link-layer-address": link_layer_address}, ]
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, neighbor)
-
- @staticmethod
- def remove_all_ipv6_neighbors(node, interface):
- """Remove all IPv6 neighbours.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :type node: dict
- :type interface: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- path = ("interfaces", ("interface", "name", interface), "ietf-ip:ipv6",
- "neighbor")
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, None)
-
- @staticmethod
- def configure_interface_ethernet(node, interface, param, value):
- """Configure the ethernet parameters of interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param param: Parameter to configure (set, change, remove)
- :param value: The value of parameter. If None, the parameter will be
- removed.
- :type node: dict
- :type interface: str
- :type param: str
- :type value: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- if param not in InterfaceKeywords.ETH_PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".format(param))
- path = ("interfaces", ("interface", "name", interface), "v3po:ethernet",
- param)
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, value)
-
- @staticmethod
- def configure_interface_routing(node, interface, param, value):
- """Configure the routing parameters of interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param param: Parameter to configure (set, change, remove)
- :param value: The value of parameter. If None, the parameter will be
- removed.
- :type node: dict
- :type interface: str
- :type param: str
- :type value: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- if param not in InterfaceKeywords.ROUTING_PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".format(param))
-
- path = ("interfaces", ("interface", "name", interface), "v3po:routing",
- param)
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, value)
-
- @staticmethod
- def honeycomb_create_vxlan_interface(node, interface, **kwargs):
- """Create a new VxLAN interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in InterfaceKeywords.VXLAN_PARAMS.
- :type node: dict
- :type interface: str
- :type kwargs: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- new_vx_lan = {
- "name": interface,
- "type": "v3po:vxlan-tunnel",
- "v3po:vxlan": {}
- }
- for param, value in kwargs.items():
- if param not in InterfaceKeywords.VXLAN_PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".
- format(param))
- new_vx_lan["v3po:vxlan"][param] = value
-
- path = ("interfaces", "interface")
- vx_lan_structure = [new_vx_lan, ]
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, vx_lan_structure)
-
- @staticmethod
- def delete_interface(node, interface):
- """Delete an interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :type node: dict
- :type interface: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If it is not possible to get information about
- interfaces or it is not possible to delete the interface.
- """
-
- path = ("interfaces", ("interface", "name", interface))
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "config_vpp_interfaces")
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get configuration information about the "
- "interfaces. Status code: {0}.".format(status_code))
-
- new_data = HcUtil.remove_item(resp, path)
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_vpp_interfaces", new_data)
- if status_code != HTTPCodes.OK:
- raise HoneycombError("Not possible to remove interface {0}. "
- "Status code: {1}.".
- format(interface, status_code))
- return resp
-
- @staticmethod
- def honeycomb_configure_interface_vxlan(node, interface, **kwargs):
- """Configure VxLAN on the interface.
-
- The keyword configures VxLAN parameters on the given interface. The type
- of interface must be set to "v3po:vxlan-tunnel".
- The new VxLAN parameters overwrite the current configuration. If a
- parameter in new configuration is missing, it is removed from VxLAN
- configuration.
- If the dictionary kwargs is empty, VxLAN configuration is removed.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in InterfaceKeywords.VXLAN_PARAMS.
- :type node: dict
- :type interface: str
- :type kwargs: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- vx_lan_structure = dict()
- for param, value in kwargs.items():
- if param not in InterfaceKeywords.VXLAN_PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".
- format(param))
- vx_lan_structure[param] = value
-
- path = ("interfaces", ("interface", "name", interface), "v3po:vxlan")
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, vx_lan_structure)
-
- @staticmethod
- def configure_interface_l2(node, interface, param, value):
- """Configure the L2 parameters of interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param param: Parameter to configure (set, change, remove)
- :param value: The value of parameter. If None, the parameter will be
- removed.
- :type node: dict
- :type interface: str
- :type param: str
- :type value: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- if param not in InterfaceKeywords.L2_PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".format(param))
- path = ("interfaces", ("interface", "name", interface), "v3po:l2",
- param)
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, value)
-
- @staticmethod
- def create_tap_interface(node, interface, **kwargs):
- """Create a new TAP interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in InterfaceKeywords.TAP_PARAMS.
- :type node: dict
- :type interface: str
- :type kwargs: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- new_tap = {
- "name": interface,
- "type": "v3po:tap-v2",
- "v3po:tap-v2": {}
- }
- for param, value in kwargs.items():
- if param not in InterfaceKeywords.TAP_PARAMS:
- raise HoneycombError(
- "The parameter {0} is invalid.".format(param))
- new_tap["v3po:tap-v2"][param] = value
-
- path = ("interfaces", "interface")
- new_tap_structure = [new_tap, ]
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, new_tap_structure)
-
- @staticmethod
- def configure_interface_tap(node, interface, **kwargs):
- """Configure TAP on the interface.
-
- The keyword configures TAP parameters on the given interface. The type
- of interface must be set to "v3po:tap-v2".
- The new TAP parameters overwrite the current configuration. If a
- parameter in new configuration is missing, it is removed from TAP
- configuration.
- If the dictionary kwargs is empty, TAP configuration is removed.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in InterfaceKeywords.TAP_PARAMS.
- :type node: dict
- :type interface: str
- :type kwargs: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- tap_structure = dict()
- for param, value in kwargs.items():
- if param not in InterfaceKeywords.TAP_PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".
- format(param))
- tap_structure[param] = value
-
- path = ("interfaces", ("interface", "name", interface), "v3po:tap-v2")
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, tap_structure)
-
- @staticmethod
- def configure_interface_vhost_user(node, interface, **kwargs):
- """Configure vhost-user on the interface.
-
- The keyword configures vhost-user parameters on the given interface.
- The type of interface must be set to "v3po:vhost-user".
- The new vhost-user parameters overwrite the current configuration. If a
- parameter in new configuration is missing, it is removed from vhost-user
- configuration.
- If the dictionary kwargs is empty, vhost-user configuration is removed.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in InterfaceKeywords.VHOST_USER_PARAMS.
- :type node: dict
- :type interface: str
- :type kwargs: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- vhost_structure = dict()
- for param, value in kwargs.items():
- if param not in InterfaceKeywords.VHOST_USER_PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".
- format(param))
- vhost_structure[param] = value
-
- path = ("interfaces", ("interface", "name", interface),
- "v3po:vhost-user")
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, vhost_structure)
-
- @staticmethod
- def create_vhost_user_interface(node, interface, **kwargs):
- """Create a new vhost-user interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in InterfaceKeywords.VHOST_USER_PARAMS.
- :type node: dict
- :type interface: str
- :type kwargs: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- """
-
- new_vhost = {
- "name": interface,
- "type": "v3po:vhost-user",
- "v3po:vhost-user": {}
- }
- for param, value in kwargs.items():
- if param not in InterfaceKeywords.VHOST_USER_PARAMS:
- raise HoneycombError("The parameter {0} is invalid.".
- format(param))
- new_vhost["v3po:vhost-user"][param] = value
-
- path = ("interfaces", "interface")
- new_vhost_structure = [new_vhost, ]
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, new_vhost_structure)
-
- @staticmethod
- def honeycomb_create_sub_interface(node, super_interface, match, tags=None,
- **kwargs):
- """Create a new sub-interface.
-
- :param node: Honeycomb node.
- :param super_interface: Super interface.
- :param match: Match type. The valid values are defined in
- InterfaceKeywords.SUB_IF_MATCH.
- :param tags: List of tags.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in InterfaceKeywords.SUB_IF_PARAMS.
- :type node: dict
- :type super_interface: str
- :type match: str
- :type tags: list
- :type kwargs: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the parameter is not valid.
- :raises KeyError: If the parameter 'match' is invalid.
- """
-
- super_interface = Topology.convert_interface_reference(
- node, super_interface, "name")
-
- match_type = {
- "default":
- {"default": {}},
- "untagged":
- {"untagged": {}},
- "vlan-tagged":
- {"vlan-tagged": {"match-exact-tags": "false"}},
- "vlan-tagged-exact-match":
- {"vlan-tagged": {"match-exact-tags": "true"}}
- }
-
- new_sub_interface = {
- "tags": {
- "tag": []
- },
- }
-
- for param, value in kwargs.items():
- if param in InterfaceKeywords.SUB_IF_PARAMS:
- new_sub_interface[param] = value
- else:
- raise HoneycombError("The parameter {0} is invalid.".
- format(param))
- try:
- new_sub_interface["match"] = match_type[match]
- except KeyError:
- raise HoneycombError("The value '{0}' of parameter 'match' is "
- "invalid.".format(match))
-
- if tags:
- new_sub_interface["tags"]["tag"].extend(tags)
-
- path = ("interfaces",
- ("interface", "name", super_interface),
- "vpp-vlan:sub-interfaces",
- "sub-interface")
- new_sub_interface_structure = [new_sub_interface, ]
- return InterfaceKeywords._set_interface_properties(
- node, super_interface, path, new_sub_interface_structure)
-
- @staticmethod
- def get_sub_interface_oper_data(node, super_interface, identifier):
- """Retrieves sub-interface operational data using Honeycomb API.
-
- :param node: Honeycomb node.
- :param super_interface: Super interface.
- :param identifier: The ID of sub-interface.
- :type node: dict
- :type super_interface: str
- :type identifier: int
- :returns: Sub-interface operational data.
- :rtype: dict
- :raises HoneycombError: If there is no sub-interface with the given ID.
- """
-
- if_data = InterfaceKeywords.get_interface_oper_data(node,
- super_interface)
- for sub_if in if_data["vpp-vlan:sub-interfaces"]["sub-interface"]:
- if str(sub_if["identifier"]) == str(identifier):
- return sub_if
-
- raise HoneycombError("The interface {0} does not have sub-interface "
- "with ID {1}".format(super_interface, identifier))
-
- @staticmethod
- def remove_all_sub_interfaces(node, super_interface):
- """Remove all sub-interfaces from the given interface.
-
- :param node: Honeycomb node.
- :param super_interface: Super interface.
- :type node: dict
- :type super_interface: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = ("interfaces",
- ("interface", "name", super_interface),
- "vpp-vlan:sub-interfaces")
-
- return InterfaceKeywords._set_interface_properties(
- node, super_interface, path, {})
-
- @staticmethod
- def set_sub_interface_state(node, super_interface, identifier, state):
- """Set the administrative state of sub-interface.
-
- :param node: Honeycomb node.
- :param super_interface: Super interface.
- :param identifier: The ID of sub-interface.
- :param state: Required sub-interface state - up or down.
- :type node: dict
- :type super_interface: str
- :type identifier: int
- :type state: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- super_interface = Topology.convert_interface_reference(
- node, super_interface, "name")
-
- intf_state = {"up": "true",
- "down": "false"}
-
- path = ("interfaces",
- ("interface", "name", super_interface),
- "vpp-vlan:sub-interfaces",
- ("sub-interface", "identifier", int(identifier)),
- "enabled")
-
- return InterfaceKeywords._set_interface_properties(
- node, super_interface, path, intf_state[state])
-
- @staticmethod
- def add_bridge_domain_to_sub_interface(node, super_interface, identifier,
- config):
- """Add a sub-interface to a bridge domain and set its parameters.
-
- :param node: Honeycomb node.
- :param super_interface: Super interface.
- :param identifier: The ID of sub-interface.
- :param config: Bridge domain configuration.
- :type node: dict
- :type super_interface: str
- :type identifier: int
- :type config: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = ("interfaces",
- ("interface", "name", super_interface),
- "vpp-vlan:sub-interfaces",
- ("sub-interface", "identifier", int(identifier)),
- "l2")
-
- return InterfaceKeywords._set_interface_properties(
- node, super_interface, path, config)
-
- @staticmethod
- def get_bd_data_from_sub_interface(node, super_interface, identifier):
- """Get the operational data about the bridge domain from sub-interface.
-
- :param node: Honeycomb node.
- :param super_interface: Super interface.
- :param identifier: The ID of sub-interface.
- :type node: dict
- :type super_interface: str
- :type identifier: int
- :returns: Operational data about the bridge domain.
- :rtype: dict
- :raises HoneycombError: If there is no sub-interface with the given ID.
- """
-
- try:
- bd_data = InterfaceKeywords.get_sub_interface_oper_data(
- node, super_interface, identifier)["l2"]
- return bd_data
- except KeyError:
- raise HoneycombError("The operational data does not contain "
- "information about a bridge domain.")
-
- @staticmethod
- def configure_tag_rewrite(node, super_interface, identifier, config):
- """Add / change / disable vlan tag rewrite on a sub-interface.
-
- :param node: Honeycomb node.
- :param super_interface: Super interface.
- :param identifier: The ID of sub-interface.
- :param config: Rewrite tag configuration.
- :type node: dict
- :type super_interface: str
- :type identifier: int
- :type config: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = ("interfaces",
- ("interface", "name", super_interface),
- "vpp-vlan:sub-interfaces",
- ("sub-interface", "identifier", int(identifier)),
- "l2",
- "rewrite")
-
- return InterfaceKeywords._set_interface_properties(
- node, super_interface, path, config)
-
- @staticmethod
- def get_tag_rewrite_oper_data(node, super_interface, identifier):
- """Get the operational data about tag rewrite.
-
- :param node: Honeycomb node.
- :param super_interface: Super interface.
- :param identifier: The ID of sub-interface.
- :type node: dict
- :type super_interface: str
- :type identifier: int
- :returns: Operational data about tag rewrite.
- :rtype: dict
- :raises HoneycombError: If there is no sub-interface with the given ID.
- """
-
- try:
- tag_rewrite = InterfaceKeywords.get_sub_interface_oper_data(
- node, super_interface, identifier)["l2"]["rewrite"]
- return tag_rewrite
- except KeyError:
- raise HoneycombError("The operational data does not contain "
- "information about the tag-rewrite.")
-
- @staticmethod
- def add_ip_address_to_sub_interface(node, super_interface, identifier,
- ip_addr, network, ip_version):
- """Add an ipv4 address to the specified sub-interface, with the provided
- netmask or network prefix length. Any existing ipv4 addresses on the
- sub-interface will be replaced.
-
- :param node: Honeycomb node.
- :param super_interface: Super interface.
- :param identifier: The ID of sub-interface.
- :param ip_addr: IPv4 address to be set.
- :param network: Network mask or network prefix length.
- :param ip_version: ipv4 or ipv6
- :type node: dict
- :type super_interface: str
- :type identifier: int
- :type ip_addr: str
- :type network: str or int
- :type ip_version: string
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the provided netmask or prefix is not valid.
- """
-
- path = ("interfaces",
- ("interface", "name", super_interface),
- "vpp-vlan:sub-interfaces",
- ("sub-interface", "identifier", int(identifier)),
- ip_version.lower())
-
- if isinstance(network, basestring) and ip_version.lower() == "ipv4":
- address = {"address": [{"ip": ip_addr, "netmask": network}, ]}
-
- elif isinstance(network, int) and 0 < network < 33:
- address = {"address": [{"ip": ip_addr, "prefix-length": network}, ]}
-
- else:
- raise HoneycombError("{0} is not a valid netmask or prefix length."
- .format(network))
-
- return InterfaceKeywords._set_interface_properties(
- node, super_interface, path, address)
-
- @staticmethod
- def remove_all_ip_addresses_from_sub_interface(node, super_interface,
- identifier, ip_version):
- """Remove all ipv4 addresses from the specified sub-interface.
-
- :param node: Honeycomb node.
- :param super_interface: Super interface.
- :param identifier: The ID of sub-interface.
- :param ip_version: ipv4 or ipv6
- :type node: dict
- :type super_interface: str
- :type identifier: int
- :type ip_version: string
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = ("interfaces",
- ("interface", "name", super_interface),
- "vpp-vlan:sub-interfaces",
- ("sub-interface", "identifier", int(identifier)),
- str(ip_version), "address")
-
- return InterfaceKeywords._set_interface_properties(
- node, super_interface, path, None)
-
- @staticmethod
- def compare_data_structures(data, ref, _path=''):
- """Checks if data obtained from UUT is as expected. If it is not,
- proceeds down the list/dictionary tree and finds the point of mismatch.
-
- :param data: Data to be checked.
- :param ref: Referential data used for comparison.
- :param _path: Used in recursive calls, stores the path taken down
- the JSON tree.
- :type data: dict
- :type ref: dict
- :type _path: str
-
- :raises HoneycombError: If the data structures do not match in some way,
- or if they are not in deserialized JSON format.
- """
-
- if data == ref:
- return True
-
- elif isinstance(data, dict) and isinstance(ref, dict):
- for key in ref:
- if key not in data:
- raise HoneycombError(
- "Key {key} is not present in path {path}. Keys in path:"
- "{data_keys}".format(
- key=key,
- path=_path,
- data_keys=data.keys()))
-
- if data[key] != ref[key]:
- if isinstance(data[key], list) \
- or isinstance(data[key], dict):
- InterfaceKeywords.compare_data_structures(
- data[key], ref[key],
- _path + '[{0}]'.format(key))
- else:
- raise HoneycombError(
- "Data mismatch, key {key} in path {path} has value"
- " {data}, but should be {ref}".format(
- key=key,
- path=_path,
- data=data[key],
- ref=ref[key]))
-
- elif isinstance(data, list) and isinstance(ref, list):
- for item in ref:
- if item not in data:
- if isinstance(item, dict):
- InterfaceKeywords.compare_data_structures(
- data[0], item,
- _path + '[{0}]'.format(ref.index(item)))
- else:
- raise HoneycombError(
- "Data mismatch, list item {index} in path {path}"
- " has value {data}, but should be {ref}".format(
- index=ref.index(item),
- path=_path,
- data=data[0],
- ref=item))
-
- else:
- raise HoneycombError(
- "Unexpected data type {data_type} in path {path}, reference"
- " type is {ref_type}. Must be list or dictionary.".format(
- data_type=type(data),
- ref_type=type(ref),
- path=_path))
-
- @staticmethod
- def compare_interface_lists(list1, list2):
- """Compare provided lists of interfaces by name.
-
- :param list1: List of interfaces.
- :param list2: List of interfaces.
- :type list1: list
- :type list2: list
- :raises HoneycombError: If an interface exists in only one of the lists.
- """
-
- ignore = ["vx_tunnel0", "vxlan_gpe_tunnel0"]
- # these have no equivalent in config data and no effect on VPP
-
- names1 = [x['name'] for x in list1]
- names2 = [x['name'] for x in list2]
-
- for name in names1:
- if name not in names2 and name not in ignore:
- raise HoneycombError("Interface {0} not present in list {1}"
- .format(name, list2))
- for name in names2:
- if name not in names1 and name not in ignore:
- raise HoneycombError("Interface {0} not present in list {1}"
- .format(name, list1))
-
- @staticmethod
- def create_vxlan_gpe_interface(node, interface, **kwargs):
- """Create a new VxLAN GPE interface.
-
- :param node: Honeycomb node.
- :param interface: The name of interface to be created.
- :param kwargs: Parameters and their values. The accepted parameters are
- defined in InterfaceKeywords.VXLAN_GPE_PARAMS.
- :type node: dict
- :type interface: str
- :type kwargs: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If a parameter in kwargs is not valid.
- """
-
- new_vxlan_gpe = {
- "name": interface,
- "type": "v3po:vxlan-gpe-tunnel",
- "v3po:vxlan-gpe": {}
- }
- for param, value in kwargs.items():
- if param in InterfaceKeywords.INTF_PARAMS:
- new_vxlan_gpe[param] = value
- elif param in InterfaceKeywords.VXLAN_GPE_PARAMS:
- new_vxlan_gpe["v3po:vxlan-gpe"][param] = value
- else:
- raise HoneycombError("The parameter {0} is invalid.".
- format(param))
- path = ("interfaces", "interface")
- vxlan_gpe_structure = [new_vxlan_gpe, ]
- return InterfaceKeywords._set_interface_properties(
- node, interface, path, vxlan_gpe_structure)
-
- @staticmethod
- def enable_acl_on_interface(node, interface, table_name):
- """Enable ACL on the given interface.
-
- :param node: Honeycomb node.
- :param interface: The interface where the ACL will be enabled.
- :param table_name: Name of the classify table.
- :type node: dict
- :type interface: str
- :type table_name: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the configuration of interface is not
- successful.
- """
-
- interface = interface.replace("/", "%2F")
-
- data = {
- "vpp-interface-acl:acl": {
- "ingress": {
- "ip4-acl": {
- "classify-table": table_name
- },
- "l2-acl": {
- "classify-table": table_name
- }
- }
- }
- }
-
- path = "/interface/" + interface + "/vpp-interface-acl:acl"
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_vpp_interfaces", data, path,
- data_representation=DataRepresentation.JSON)
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of interface '{0}' was not successful. "
- "Status code: {1}.".format(interface, status_code))
- return resp
-
- @staticmethod
- def enable_policer_on_interface(node, interface, table_name):
- """Enable Policer on the given interface.
-
- :param node: Honeycomb node.
- :param interface: The interface where policer will be enabled.
- :param table_name: Name of the classify table.
- :type node: dict
- :type interface: str
- :type table_name: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the configuration of interface is not
- successful.
- """
- interface = Topology.convert_interface_reference(
- node, interface, "name")
- interface = interface.replace("/", "%2F")
-
- data = {
- "interface-policer:policer": {
- "ip4-table": table_name
- }
- }
-
- path = "/interface/" + interface + "/interface-policer:policer"
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_vpp_interfaces", data, path,
- data_representation=DataRepresentation.JSON)
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of interface '{0}' was not successful. "
- "Status code: {1}.".format(interface, status_code))
- return resp
-
- @staticmethod
- def disable_policer_on_interface(node, interface):
- """Disable Policer on the given interface.
-
- :param node: Honeycomb node.
- :param interface: The interface where policer will be disabled.
- :type node: dict
- :type interface: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the configuration of interface is not
- successful.
- """
- interface = Topology.convert_interface_reference(
- node, interface, "name")
- interface = interface.replace("/", "%2F")
-
- path = "/interface/" + interface + "/interface-policer:policer"
- status_code, resp = HcUtil.\
- delete_honeycomb_data(node, "config_vpp_interfaces", path)
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "The configuration of interface '{0}' was not successful. "
- "Status code: {1}.".format(interface, status_code))
- return resp
-
- @staticmethod
- def disable_acl_on_interface(node, interface):
- """Disable ACL on the given interface.
-
- :param node: Honeycomb node.
- :param interface: The interface where the ACL will be disabled.
- :type node: dict
- :type interface: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the configuration of interface is not
- successful.
- """
-
- interface = interface.replace("/", "%2F")
-
- path = "/interface/" + interface + "/vpp-interface-acl:acl"
-
- status_code, resp = HcUtil.\
- delete_honeycomb_data(node, "config_vpp_interfaces", path)
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "The configuration of interface '{0}' was not successful. "
- "Status code: {1}.".format(interface, status_code))
- return resp
-
- @staticmethod
- def create_pbb_sub_interface(node, intf, params):
- """Creates a PBB sub-interface on the given interface and sets its
- parameters.
-
- :param node: Honeycomb node.
- :param intf: The interface where PBB sub-interface will be configured.
- :param params: Configuration parameters of the sub-interface to be
- created.
- :type node: dict
- :type intf: str
- :type params: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the configuration of sub-interface is not
- successful.
- """
-
- interface = intf.replace("/", "%2F")
- path = "/interface/{0}/pbb-rewrite".format(interface)
- status_code, resp = HcUtil. \
- put_honeycomb_data(node, "config_vpp_interfaces", params, path,
- data_representation=DataRepresentation.JSON)
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of PBB sub-interface '{0}' was not "
- "successful. Status code: {1}.".format(intf, status_code))
- return resp
-
- @staticmethod
- def delete_pbb_sub_interface(node, intf):
- """Deletes the given PBB sub-interface.
-
- :param node: Honeycomb node.
- :param intf: The interface where PBB sub-interface will be deleted.
- :type node: dict
- :type intf: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the removal of sub-interface is not
- successful.
- """
-
- interface = intf.replace("/", "%2F")
- path = "/interface/{0}/pbb-rewrite".format(interface)
-
- status_code, resp = HcUtil. \
- delete_honeycomb_data(node, "config_vpp_interfaces", path)
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "The removal of pbb sub-interface '{0}' was not successful. "
- "Status code: {1}.".format(intf, status_code))
- return resp
-
- @staticmethod
- def get_pbb_sub_interface_oper_data(node, intf, sub_if_id):
- """Retrieves PBB sub-interface operational data from Honeycomb.
-
- :param node: Honeycomb node.
- :param intf: The interface where PBB sub-interface is located.
- :param sub_if_id: ID of the PBB sub-interface.
- :type node: dict
- :type intf: str
- :type sub_if_id: str or int
- :returns: PBB sub-interface operational data.
- :rtype: dict
- :raises HoneycombError: If the removal of sub-interface is not
- successful.
- """
-
- raise NotImplementedError
-
- @staticmethod
- def check_disabled_interface(node, interface):
- """Retrieves list of disabled interface indices from Honeycomb,
- and matches with the provided interface by index.
-
- :param node: Honeycomb node.
- :param interface: Index number of an interface on the node.
- :type node: dict
- :type interface: int
- :returns: True if the interface exists in disabled interfaces.
- :rtype: bool
- :raises HoneycombError: If the interface is not present
- in retrieved list of disabled interfaces.
- """
- data = InterfaceKeywords.get_disabled_interfaces_oper_data(node)
- # decrement by one = conversion from HC if-index to VPP sw_if_index
- interface -= 1
-
- for item in data:
- if item["index"] == interface:
- return True
- raise HoneycombError("Interface index {0} not present in list"
- " of disabled interfaces.".format(interface))
-
- @staticmethod
- def configure_interface_span(node, dst_interface, src_interfaces=None):
- """Configure SPAN port mirroring on the specified interfaces. If no
- source interface is provided, SPAN will be disabled.
-
- :param node: Honeycomb node.
- :param dst_interface: Interface to mirror packets to.
- :param src_interfaces: List of interfaces to mirror packets from.
- :type node: dict
- :type dst_interface: str or int
- :type src_interfaces: list of dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If SPAN could not be configured.
- """
-
- interface = Topology.convert_interface_reference(
- node, dst_interface, "name")
- interface = interface.replace("/", "%2F")
- path = "/interface/" + interface + "/span"
-
- if not src_interfaces:
- status_code, _ = HcUtil.delete_honeycomb_data(
- node, "config_vpp_interfaces", path)
- else:
- for src_interface in src_interfaces:
- src_interface["iface-ref"] = Topology.\
- convert_interface_reference(
- node, src_interface["iface-ref"], "name")
- data = {
- "span": {
- "mirrored-interfaces": {
- "mirrored-interface": src_interfaces
- }
- }
- }
-
- status_code, _ = HcUtil.put_honeycomb_data(
- node, "config_vpp_interfaces", data, path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Configuring SPAN failed. Status code:{0}".format(status_code))
-
- @staticmethod
- def configure_sub_interface_span(node, super_interface, dst_interface_index,
- src_interfaces=None):
- """Configure SPAN port mirroring on the specified sub-interface. If no
- source interface is provided, SPAN will be disabled.
-
- Note: Does not support source sub-interfaces, only destination.
-
- :param node: Honeycomb node.
- :param super_interface: Name, link name or sw_if_index
- of the destination interface's super-interface.
- :param dst_interface_index: Index of sub-interface to mirror packets to.
- :param src_interfaces: List of interfaces to mirror packets from.
- :type node: dict
- :type super_interface: str or int
- :type dst_interface_index: int
- :type src_interfaces: list of dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If SPAN could not be configured.
- """
-
- super_interface = Topology.convert_interface_reference(
- node, super_interface, "name")
- super_interface = super_interface.replace("/", "%2F")
-
- path = "/interface/{0}/vpp-vlan:sub-interfaces/sub-interface/{1}/span"\
- .format(super_interface, dst_interface_index)
-
- if not src_interfaces:
- status_code, _ = HcUtil.delete_honeycomb_data(
- node, "config_vpp_interfaces", path)
- else:
- for src_interface in src_interfaces:
- src_interface["iface-ref"] = Topology. \
- convert_interface_reference(
- node, src_interface["iface-ref"], "name")
- data = {
- "span": {
- "mirrored-interfaces": {
- "mirrored-interface": src_interfaces
- }
- }
- }
-
- status_code, _ = HcUtil.put_honeycomb_data(
- node, "config_vpp_interfaces", data, path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Configuring SPAN failed. Status code:{0}".format(status_code))
-
- @staticmethod
- def add_interface_local0_to_topology(node):
- """Use Topology methods to add interface "local0" to working topology,
- if not already present.
-
- :param node: DUT node.
- :type node: dict
- """
-
- if Topology.get_interface_by_sw_index(node, 0) is None:
- local0_key = Topology.add_new_port(node, "localzero")
- Topology.update_interface_sw_if_index(node, local0_key, 0)
- Topology.update_interface_name(node, local0_key, "local0")
-
- @staticmethod
- def configure_interface_unnumbered(node, interface, interface_src=None):
- """Configure the specified interface as unnumbered. The interface
- borrows IP address from the specified source interface. If not source
- interface is provided, unnumbered configuration will be removed.
-
- :param node: Honeycomb node.
- :param interface: Name, link name or sw_if_index of an interface.
- :param interface_src: Name of source interface.
- :type node: dict
- :type interface: str or int
- :type interface_src: str
- :raises HoneycombError: If the configuration fails.
- """
-
- interface = InterfaceKeywords.handle_interface_reference(
- node, interface)
-
- path = "/interface/{0}/unnumbered-interfaces:unnumbered"\
- .format(interface)
-
- if interface_src:
- data = {
- "unnumbered": {
- "use": interface_src
- }
- }
- status_code, _ = HcUtil.put_honeycomb_data(
- node, "config_vpp_interfaces", data, path)
- else:
- status_code, _ = HcUtil.delete_honeycomb_data(
- node, "config_vpp_interfaces", path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Configuring unnumbered interface failed. "
- "Status code:{0}".format(status_code))
-
- @staticmethod
- def handle_interface_reference(node, interface):
- """Convert any interface reference to interface name used by Honeycomb.
-
- :param node: Honeycomb node.
- :param interface: Name, link name or sw_if_index of an interface,
- name of a custom interface or name of a sub-interface.
- :type node: Honeycomb node.
- :type interface: str or int
- :returns: Name of interface that can be used in Honeycomb requests.
- :rtype: str
- """
-
- try:
- interface = Topology.convert_interface_reference(
- node, interface, "name")
- interface = interface.replace("/", "%2F")
- except RuntimeError:
- # interface is not in topology
- if "." in interface:
- # Assume it's the name of a sub-interface
- interface, index = interface.split(".")
- interface = interface.replace("/", "%2F")
- interface = "{0}/vpp-vlan:sub-interfaces/sub-interface/{1}".\
- format(interface, index)
- else:
- # Assume it's the name of a custom interface (pbb, vxlan, etc.)
- interface = interface.replace("/", "%2F")
-
- return interface
diff --git a/resources/libraries/python/honeycomb/HcAPIKwNSH.py b/resources/libraries/python/honeycomb/HcAPIKwNSH.py
deleted file mode 100644
index e042fdd423..0000000000
--- a/resources/libraries/python/honeycomb/HcAPIKwNSH.py
+++ /dev/null
@@ -1,173 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This module implements keywords to manipulate NSH-SFC data structures using
-Honeycomb REST API."""
-
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import DataRepresentation
-
-
-class NSHKeywords(object):
- """Implementation of keywords which make it possible to:
- - add and remove NSH entries,
- - get operational data about NSH entries,
- - add and remove NSH maps,
- - get operational data about NSH maps.
- """
-
- def __init__(self):
- pass
-
- @staticmethod
- def _set_nsh_properties(node, path, data=None):
- """Set NSH properties and check the return code.
-
- :param node: Honeycomb node.
- :param path: Path which is added to the base path to identify the data.
- :param data: The new data to be set. If None, the item will be removed.
- :type node: dict
- :type path: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response to PUT is not
- OK or ACCEPTED.
- """
-
- if data:
- status_code, resp = HcUtil. \
- put_honeycomb_data(node, "config_nsh", data, path,
- data_representation=DataRepresentation.JSON)
- else:
- status_code, resp = HcUtil. \
- delete_honeycomb_data(node, "config_nsh", path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of NSH-SFC was not successful. "
- "Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def add_nsh_entry(node, name, data):
- """Add an NSH entry to the list of entries. The keyword does
- not validate given data.
-
- :param node: Honeycomb node.
- :param name: Name for the NSH entry.
- :param data: Settings for the new entry.
- :type node: dict
- :type name: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/nsh-entries/nsh-entry/{0}".format(name)
-
- return NSHKeywords._set_nsh_properties(node, path, data)
-
- @staticmethod
- def add_nsh_map(node, name, data):
- """Add an NSH map to the list of maps. The keyword does
- not validate given data.
-
- :param node: Honeycomb node.
- :param name: Name for the NSH map.
- :param data: Settings for the new map.
- :type node: dict
- :type name: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- """
- path = "/nsh-maps/nsh-map/{0}".format(name)
-
- return NSHKeywords._set_nsh_properties(node, path, data)
-
- @staticmethod
- def remove_nsh_entry(node, name):
- """Remove an NSH entry from the list of entries.
- :param node: Honeycomb node.
- :param name: Name of the NSH entry.
- :type node: dict
- :type name: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/nsh-entries/nsh-entry/{0}".format(name)
- return NSHKeywords._set_nsh_properties(node, path)
-
- @staticmethod
- def remove_nsh_map(node, name):
- """Remove an NSH map from the list of maps.
- :param node: Honeycomb node.
- :param name: Name of the NSH map.
- :type node: dict
- :type name: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/nsh-maps/nsh-map/{0}".format(name)
- return NSHKeywords._set_nsh_properties(node, path)
-
- @staticmethod
- def get_nsh_oper_data(node, entry_name=None, map_name=None):
- """Get all NSH operational data present on the node. Optionally
- filter out data for a specific entry or map.
-
- :param node: Honeycomb node.
- :param entry_name: Name of a specific NSH entry. Optional.
- :param map_name: Name of a specific NSH map. Optional. Do not use
- together with entry_name.
- :type node: dict
- :type entry_name: str
- :type map_name: str
- :returns: List of classify tables.
- :rtype: list
- """
- if entry_name:
- path = "/nsh-entries/nsh-entry/{0}".format(entry_name)
- elif map_name:
- path = "/nsh-maps/nsh-map/{0}".format(map_name)
- else:
- path = ''
-
- status_code, resp = HcUtil. \
- get_honeycomb_data(node, "oper_nsh", path)
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational information about the "
- "classify tables. Status code: {0}.".format(status_code))
-
- return resp
-
- @staticmethod
- def clear_nsh_settings(node):
- """Remove the entire NSH container with all of its entries and maps.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- return NSHKeywords._set_nsh_properties(node, '')
diff --git a/resources/libraries/python/honeycomb/HcPersistence.py b/resources/libraries/python/honeycomb/HcPersistence.py
deleted file mode 100644
index 1627375f72..0000000000
--- a/resources/libraries/python/honeycomb/HcPersistence.py
+++ /dev/null
@@ -1,142 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Implementation of keywords for managing Honeycomb persistence files."""
-
-from robot.api import logger
-
-from resources.libraries.python.Constants import Constants as Const
-from resources.libraries.python.honeycomb.HoneycombUtil import HoneycombError
-from resources.libraries.python.ssh import SSH
-from resources.libraries.python.topology import NodeType
-
-
-class HcPersistence(object):
- """Implements keywords for managing Honeycomb persistence files.
-
- The keywords implemented in this class make possible to:
- - find and replace strings in config.json persistence file
- """
-
- def __init__(self):
- pass
-
- @staticmethod
- def clear_persisted_honeycomb_config(*nodes):
- """Remove configuration data persisted from last Honeycomb session.
- Default configuration will be used instead.
-
- :param nodes: List of DUTs to execute on.
- :type nodes: list
- :raises HoneycombError: If persisted configuration could not be removed.
- """
- cmd = "rm -rf {}/*".format(Const.REMOTE_HC_PERSIST)
- for node in nodes:
- if node['type'] == NodeType.DUT:
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, stderr) = ssh.exec_command_sudo(cmd)
- if ret_code != 0:
- if "No such file or directory" not in stderr:
- raise HoneycombError('Could not clear persisted '
- 'configuration on node {0}, {1}'
- .format(node['host'], stderr))
- else:
- logger.info("Persistence data was not present on node"
- " {0}".format(node['host']))
- else:
- logger.info("Persistence files removed on node {0}"
- .format(node['host']))
-
- @staticmethod
- def modify_persistence_files(node, find, replace):
- """Searches contents of persistence file data.json for the provided
- string, and replaces all occurrences with another string.
-
- :param node: Honeycomb node.
- :param find: Text to find in file.
- :param replace: String to replace anything found with.
- :type node: dict
- :type find: string
- :type replace: string
- :raises HoneycombError: If persistent configuration couldn't be
- modified.
- """
-
- argument = "\"s/{0}/{1}/g\"".format(find, replace)
- path = "{0}/config/data.json".format(Const.REMOTE_HC_PERSIST)
- command = "sed -i {0} {1}".format(argument, path)
-
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, stderr) = ssh.exec_command_sudo(command)
- if ret_code != 0:
- raise HoneycombError("Failed to modify persistence file on node"
- " {0}, {1}".format(node, stderr))
-
- @staticmethod
- def log_persisted_configuration(node):
- """Read contents of Honeycomb persistence files and print them to log.
-
- :param node: Honeycomb node.
- :type node: dict
- """
-
- commands = [
- "cat {0}/config/data.json".format(Const.REMOTE_HC_PERSIST),
- "cat {0}/context/data.json".format(Const.REMOTE_HC_PERSIST),
- ]
-
- ssh = SSH()
- ssh.connect(node)
- for command in commands:
- (_, _, _) = ssh.exec_command_sudo(command)
-
- @staticmethod
- def configure_persistence(node, state):
- """Enable or disable Honeycomb configuration data persistence.
-
- :param node: Honeycomb node.
- :param state: Enable or Disable.
- :type node: dict
- :type state: str
- :raises ValueError: If the state argument is incorrect.
- :raises HoneycombError: If the operation fails.
- """
-
- state = state.lower()
- if state == "enable":
- state = "true"
- elif state == "disable":
- state = "false"
- else:
- raise ValueError("Unexpected value of state argument:"
- " {0} provided. Must be enable or disable."
- .format(state))
-
- for setting in ("persist-config", "persist-context"):
- # find the setting, replace entire line with 'setting: state'
- find = '\\"{setting}\\":'.format(setting=setting)
- replace = '\\"{setting}\\": \\"{state}\\",'.format(
- setting=setting, state=state)
-
- argument = '"/{0}/c\\ {1}"'.format(find, replace)
- path = "{0}/config/honeycomb.json".format(Const.REMOTE_HC_DIR)
- command = "sed -i {0} {1}".format(argument, path)
-
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, stderr) = ssh.exec_command_sudo(command)
- if ret_code != 0:
- raise HoneycombError("Failed to modify configuration on "
- "node {0}, {1}".format(node, stderr))
diff --git a/resources/libraries/python/honeycomb/HoneycombSetup.py b/resources/libraries/python/honeycomb/HoneycombSetup.py
deleted file mode 100644
index 796639e879..0000000000
--- a/resources/libraries/python/honeycomb/HoneycombSetup.py
+++ /dev/null
@@ -1,821 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Implementation of keywords for Honeycomb setup."""
-
-from json import loads
-from time import time, sleep
-
-from ipaddress import IPv6Address, AddressValueError
-
-from robot.api import logger
-
-from resources.libraries.python.HTTPRequest import HTTPRequest, HTTPCodes, \
- HTTPRequestError
-from resources.libraries.python.Constants import Constants as Const
-from resources.libraries.python.honeycomb.HoneycombUtil import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-from resources.libraries.python.ssh import SSH
-from resources.libraries.python.topology import NodeType
-
-
-class HoneycombSetup(object):
- """Implements keywords for Honeycomb setup.
-
- The keywords implemented in this class make possible to:
- - start Honeycomb,
- - stop Honeycomb,
- - check the Honeycomb start-up state,
- - check the Honeycomb shutdown state,
- - add VPP to the topology.
- """
-
- def __init__(self):
- pass
-
- @staticmethod
- def start_honeycomb_on_duts(*nodes):
- """Start Honeycomb on specified DUT nodes.
-
- This keyword starts the Honeycomb service on specified DUTs.
- The keyword just starts the Honeycomb and does not check its startup
- state. Use the keyword "Check Honeycomb Startup State" to check if the
- Honeycomb is up and running.
- Honeycomb must be installed in "/opt" directory, otherwise the start
- will fail.
-
- :param nodes: List of nodes to start Honeycomb on.
- :type nodes: list
- :raises HoneycombError: If Honeycomb fails to start.
- """
-
- HoneycombSetup.print_environment(nodes)
-
- cmd = "sudo service honeycomb start"
-
- for node in nodes:
- if node['type'] == NodeType.DUT:
- logger.console(
- "\n(re)Starting Honeycomb service on node {0}".format(
- node["host"]))
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, _) = ssh.exec_command_sudo(cmd)
- if int(ret_code) != 0:
- raise HoneycombError('Node {0} failed to start Honeycomb.'.
- format(node['host']))
- else:
- logger.info("Starting the Honeycomb service on node {0} is "
- "in progress ...".format(node['host']))
-
- @staticmethod
- def stop_honeycomb_on_duts(*nodes):
- """Stop the Honeycomb service on specified DUT nodes.
-
- This keyword stops the Honeycomb service on specified nodes. It just
- stops the Honeycomb and does not check its shutdown state. Use the
- keyword "Check Honeycomb Shutdown State" to check if Honeycomb has
- stopped.
-
- :param nodes: List of nodes to stop Honeycomb on.
- :type nodes: list
- :raises HoneycombError: If Honeycomb failed to stop.
- """
-
- cmd = "sudo service honeycomb stop"
- errors = []
-
- for node in nodes:
- if node['type'] == NodeType.DUT:
- logger.console(
- "\nShutting down Honeycomb service on node {0}".format(
- node["host"]))
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, _) = ssh.exec_command_sudo(cmd)
- if int(ret_code) != 0:
- errors.append(node['host'])
- else:
- logger.info("Stopping the Honeycomb service on node {0} is "
- "in progress ...".format(node['host']))
- if errors:
- raise HoneycombError('Node(s) {0} failed to stop Honeycomb.'.
- format(errors))
-
- @staticmethod
- def restart_honeycomb_on_dut(node):
- """Restart Honeycomb on specified DUT nodes.
-
- This keyword restarts the Honeycomb service on specified DUTs. Use the
- keyword "Check Honeycomb Startup State" to check if the Honeycomb is up
- and running.
-
- :param node: Node to restart Honeycomb on.
- :type node: dict
- :raises HoneycombError: If Honeycomb fails to start.
- """
-
- logger.console(
- "\n(re)Starting Honeycomb service on node {0}".format(node["host"]))
-
- cmd = "sudo service honeycomb restart"
-
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, _) = ssh.exec_command_sudo(cmd)
- if int(ret_code) != 0:
- raise HoneycombError('Node {0} failed to restart Honeycomb.'.
- format(node['host']))
- else:
- logger.info(
- "Honeycomb service restart is in progress on node {0}".format(
- node['host']))
-
- @staticmethod
- def check_honeycomb_startup_state(node, timeout=360, retries=20,
- interval=15):
- """Repeatedly check the status of Honeycomb startup until it is fully
- started or until timeout or max retries is reached.
-
- :param node: Honeycomb node.
- :param timeout: Timeout value in seconds.
- :param retries: Max number of retries.
- :param interval: Interval between checks, in seconds.
- :type node: dict
- :type timeout: int
- :type retries: int
- :type interval: int
- :raises HoneycombError: If the Honeycomb process IP cannot be found,
- or if timeout or number of retries is exceeded.
- """
-
- ssh = SSH()
- ssh.connect(node)
-
- count = 0
- start = time()
- while time() - start < timeout and count < retries:
- count += 1
-
- try:
- status_code_version, _ = HcUtil.get_honeycomb_data(
- node, "oper_vpp_version")
- status_code_if_cfg, _ = HcUtil.get_honeycomb_data(
- node, "config_vpp_interfaces")
- status_code_if_oper, _ = HcUtil.get_honeycomb_data(
- node, "oper_vpp_interfaces")
- except HTTPRequestError:
- sleep(interval)
- continue
- if status_code_if_cfg == HTTPCodes.OK\
- and status_code_if_cfg == HTTPCodes.OK\
- and status_code_if_oper == HTTPCodes.OK:
- logger.info("Check successful, Honeycomb is up and running.")
- break
- else:
- logger.debug(
- "Attempt ${count} failed on Restconf check. Status codes:\n"
- "Version: {version}\n"
- "Interface config: {if_cfg}\n"
- "Interface operational: {if_oper}".format(
- count=count,
- version=status_code_version,
- if_cfg=status_code_if_cfg,
- if_oper=status_code_if_oper))
- sleep(interval)
- continue
- else:
- _, vpp_status, _ = ssh.exec_command("sudo service vpp status")
- raise HoneycombError(
- "Timeout or max retries exceeded. Status of VPP:\n"
- "{vpp_status}".format(vpp_status=vpp_status))
-
- @staticmethod
- def check_honeycomb_shutdown_state(node):
- """Check state of Honeycomb service during shutdown on specified nodes.
-
- Honeycomb nodes reply with connection refused or the following status
- codes depending on shutdown progress: codes 200, 404.
-
- :param node: List of DUT nodes stopping Honeycomb.
- :type node: dict
- :returns: True if all GETs fail to connect.
- :rtype: bool
- """
- cmd = "pgrep honeycomb"
-
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, _) = ssh.exec_command_sudo(cmd)
- if ret_code == 0:
- raise HoneycombError('Honeycomb on node {0} is still '
- 'running.'.format(node['host']),
- enable_logging=False)
- else:
- logger.info("Honeycomb on node {0} has stopped".
- format(node['host']))
- return True
-
- @staticmethod
- def configure_restconf_binding_address(node):
- """Configure Honeycomb to accept restconf requests from all IP
- addresses. IP version is determined by node data.
-
- :param node: Information about a DUT node.
- :type node: dict
- :raises HoneycombError: If the configuration could not be changed.
- """
-
- find = "restconf-binding-address"
- try:
- IPv6Address(unicode(node["host"]))
- # if management IP of the node is in IPv6 format
- replace = '\\"restconf-binding-address\\": \\"0::0\\",'
- except (AttributeError, AddressValueError):
- replace = '\\"restconf-binding-address\\": \\"0.0.0.0\\",'
-
- argument = '"/{0}/c\\ {1}"'.format(find, replace)
- path = "{0}/config/restconf.json".format(Const.REMOTE_HC_DIR)
- command = "sed -i {0} {1}".format(argument, path)
-
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, stderr) = ssh.exec_command_sudo(command)
- if ret_code != 0:
- raise HoneycombError("Failed to modify configuration on "
- "node {0}, {1}".format(node, stderr))
-
- @staticmethod
- def configure_jvpp_timeout(node, timeout=10):
- """Configure timeout value for Java API commands Honeycomb sends to VPP.
-
- :param node: Information about a DUT node.
- :param timeout: Timeout value in seconds.
- :type node: dict
- :type timeout: int
- :raises HoneycombError: If the configuration could not be changed.
- """
-
- find = "jvpp-request-timeout"
- replace = '\\"jvpp-request-timeout\\": {0}'.format(timeout)
-
- argument = '"/{0}/c\\ {1}"'.format(find, replace)
- path = "{0}/config/jvpp.json".format(Const.REMOTE_HC_DIR)
- command = "sed -i {0} {1}".format(argument, path)
-
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, stderr) = ssh.exec_command_sudo(command)
- if ret_code != 0:
- raise HoneycombError("Failed to modify configuration on "
- "node {0}, {1}".format(node, stderr))
-
- @staticmethod
- def print_environment(nodes):
- """Print information about the nodes to log. The information is defined
- by commands in cmds tuple at the beginning of this method.
-
- :param nodes: List of DUT nodes to get information about.
- :type nodes: list
- """
-
- # TODO: When everything is set and running in VIRL env, transform this
- # method to a keyword checking the environment.
-
- cmds = ("uname -a",
- "df -lh",
- "echo $JAVA_HOME",
- "echo $PATH",
- "which java",
- "java -version",
- "dpkg --list | grep openjdk",
- "ls -la /opt/honeycomb",
- "cat /opt/honeycomb/modules/*module-config")
-
- for node in nodes:
- if node['type'] == NodeType.DUT:
- logger.info("Checking node {} ...".format(node['host']))
- for cmd in cmds:
- logger.info("Command: {}".format(cmd))
- ssh = SSH()
- ssh.connect(node)
- ssh.exec_command_sudo(cmd)
-
- @staticmethod
- def print_ports(node):
- """Uses "sudo netstat -anp | grep java" to print port where a java
- application listens.
-
- :param node: Honeycomb node where we want to print the ports.
- :type node: dict
- """
-
- cmds = ("netstat -anp | grep java",
- "ps -ef | grep [h]oneycomb")
-
- logger.info("Checking node {} ...".format(node['host']))
- for cmd in cmds:
- logger.info("Command: {}".format(cmd))
- ssh = SSH()
- ssh.connect(node)
- ssh.exec_command_sudo(cmd)
-
- @staticmethod
- def configure_log_level(node, level):
- """Set Honeycomb logging to the specified level.
-
- :param node: Honeycomb node.
- :param level: Log level (INFO, DEBUG, TRACE).
- :type node: dict
- :type level: str
- """
-
- find = 'logger name=\\"io.fd\\"'
- replace = '<logger name=\\"io.fd\\" level=\\"{0}\\"/>'.format(level)
-
- argument = '"/{0}/c\\ {1}"'.format(find, replace)
- path = "{0}/config/logback.xml".format(Const.REMOTE_HC_DIR)
- command = "sed -i {0} {1}".format(argument, path)
-
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, stderr) = ssh.exec_command_sudo(command)
- if ret_code != 0:
- raise HoneycombError("Failed to modify configuration on "
- "node {0}, {1}".format(node, stderr))
-
- @staticmethod
- def manage_honeycomb_features(node, feature, disable=False):
- """Configure Honeycomb to use features that are disabled by default, or
- disable previously enabled features.
-
- ..Note:: If the module is not enabled in VPP, Honeycomb will
- be unable to establish VPP connection.
-
- :param node: Honeycomb node.
- :param feature: Feature to enable.
- :param disable: Disable the specified feature instead of enabling it.
- :type node: dict
- :type feature: string
- :type disable: bool
- :raises HoneycombError: If the configuration could not be changed.
- """
-
- disabled_features = {
- "NSH": ["io.fd.hc2vpp.vppnsh.impl.VppNshModule"],
- "BGP": ["io.fd.hc2vpp.bgp.inet.BgpInetModule",
- "io.fd.honeycomb.infra.bgp.BgpModule",
- "io.fd.honeycomb.infra.bgp.BgpReadersModule",
- "io.fd.honeycomb.infra.bgp.BgpWritersModule",
- "io.fd.honeycomb.northbound.bgp.extension.InetModule",
- "io.fd.honeycomb.northbound.bgp.extension.EvpnModule",
- "io.fd.honeycomb.northbound.bgp.extension.L3VpnV4Module",
- "io.fd.honeycomb.northbound.bgp.extension.L3VpnV6Module",
- "io.fd.honeycomb.northbound.bgp.extension."
- "LabeledUnicastModule",
- "io.fd.honeycomb.northbound.bgp.extension.LinkstateModule"]
- }
-
- ssh = SSH()
- ssh.connect(node)
-
- if feature in disabled_features.keys():
- # for every module, uncomment by replacing the entire line
- for item in disabled_features[feature]:
- find = replace = "{0}".format(item)
- if disable:
- replace = "// {0}".format(find)
-
- argument = '"/{0}/c\\ {1}"'.format(find, replace)
- path = "{0}/modules/*module-config"\
- .format(Const.REMOTE_HC_DIR)
- command = "sed -i {0} {1}".format(argument, path)
-
- (ret_code, _, stderr) = ssh.exec_command_sudo(command)
- if ret_code != 0:
- raise HoneycombError("Failed to modify configuration on "
- "node {0}, {1}".format(node, stderr))
- else:
- raise HoneycombError(
- "Unrecognized feature {0}.".format(feature))
-
- @staticmethod
- def copy_java_libraries(node):
- """Copy Java libraries installed by vpp-api-java package to honeycomb
- lib folder.
-
- This is a (temporary?) workaround for jvpp version mismatches.
-
- :param node: Honeycomb node
- :type node: dict
- """
-
- ssh = SSH()
- ssh.connect(node)
- (_, stdout, _) = ssh.exec_command_sudo(
- "ls /usr/share/java | grep ^jvpp-*")
-
- files = stdout.split("\n")[:-1]
- for item in files:
- # example filenames:
- # jvpp-registry-17.04.jar
- # jvpp-core-17.04.jar
-
- parts = item.split("-")
- version = "{0}-SNAPSHOT".format(parts[2][:5])
- artifact_id = "{0}-{1}".format(parts[0], parts[1])
-
- directory = "{0}/lib/io/fd/vpp/{1}/{2}".format(
- Const.REMOTE_HC_DIR, artifact_id, version)
- cmd = "sudo mkdir -p {0}; " \
- "sudo cp /usr/share/java/{1} {0}/{2}-{3}.jar".format(
- directory, item, artifact_id, version)
-
- (ret_code, _, stderr) = ssh.exec_command(cmd)
- if ret_code != 0:
- raise HoneycombError("Failed to copy JVPP libraries on "
- "node {0}, {1}".format(node, stderr))
-
- @staticmethod
- def copy_odl_client(node, odl_name, src_path, dst_path):
- """Copy ODL Client from source path to destination path.
-
- :param node: Honeycomb node.
- :param odl_name: Name of ODL client version to use.
- :param src_path: Source Path where to find ODl client.
- :param dst_path: Destination path.
- :type node: dict
- :type odl_name: str
- :type src_path: str
- :type dst_path: str
- :raises HoneycombError: If the operation fails.
- """
-
- ssh = SSH()
- ssh.connect(node)
-
- cmd = "sudo rm -rf {dst}/*karaf_{odl_name} && " \
- "cp -r {src}/*karaf_{odl_name}* {dst}".format(
- src=src_path, odl_name=odl_name, dst=dst_path)
-
- ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=180)
- if int(ret_code) != 0:
- raise HoneycombError(
- "Failed to copy ODL client on node {0}".format(node["host"]))
-
- @staticmethod
- def setup_odl_client(node, path):
- """Start ODL client on the specified node.
-
- Karaf should be located in the provided path, and VPP and Honeycomb
- should already be running, otherwise the start will fail.
-
- :param node: Node to start ODL client on.
- :param path: Path to ODL client on node.
- :type node: dict
- :type path: str
- :raises HoneycombError: If Honeycomb fails to start.
- """
-
- logger.console("\nStarting ODL client ...")
- ssh = SSH()
- ssh.connect(node)
-
- cmd = "{path}/*karaf*/bin/start clean".format(path=path)
- ret_code, _, _ = ssh.exec_command_sudo(cmd)
-
- if int(ret_code) != 0:
- raise HoneycombError('Node {0} failed to start ODL.'.
- format(node['host']))
- else:
- logger.info("Starting the ODL client on node {0} is "
- "in progress ...".format(node['host']))
-
- @staticmethod
- def install_odl_features(node, path, *features):
- """Install required features on a running ODL client.
-
- :param node: Honeycomb node.
- :param path: Path to ODL client on node.
- :param features: Optional, list of additional features to install.
- :type node: dict
- :type path: str
- :type features: list
- """
-
- ssh = SSH()
- ssh.connect(node)
-
- auth = "-u karaf -p karaf"
-
- cmd = "{path}/*karaf*/bin/client {auth} feature:install " \
- "odl-restconf-all " \
- "odl-netconf-connector-all " \
- "odl-netconf-topology".format(path=path, auth=auth)
- for feature in features:
- cmd += " {0}".format(feature)
-
- ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=250)
-
- if int(ret_code) != 0:
- raise HoneycombError("Feature install did not succeed.")
-
- @staticmethod
- def check_odl_startup_state(node):
- """Check the status of ODL client startup.
-
- :param node: Honeycomb node.
- :param node: dict
- :returns: True when ODL is started.
- :rtype: bool
- :raises HoneycombError: When the response is not code 200: OK.
- """
-
- path = HcUtil.read_path_from_url_file(
- "odl_client/odl_netconf_connector")
- expected_status_codes = (HTTPCodes.UNAUTHORIZED,
- HTTPCodes.FORBIDDEN,
- HTTPCodes.NOT_FOUND,
- HTTPCodes.SERVICE_UNAVAILABLE,
- HTTPCodes.INTERNAL_SERVER_ERROR)
-
- status_code, _ = HTTPRequest.get(node, path, timeout=10,
- enable_logging=False)
- if status_code == HTTPCodes.OK:
- logger.info("ODL client on node {0} is up and running".
- format(node['host']))
- elif status_code in expected_status_codes:
- if status_code == HTTPCodes.UNAUTHORIZED:
- logger.info('Unauthorized. If this triggers keyword '
- 'timeout, verify username and password.')
- raise HoneycombError('ODL client on node {0} running but '
- 'not yet ready.'.format(node['host']),
- enable_logging=False)
- else:
- raise HoneycombError('Unexpected return code: {0}.'.
- format(status_code))
- return True
-
- @staticmethod
- def check_odl_shutdown_state(node):
- """Check the status of ODL client shutdown.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: True when ODL is stopped.
- :rtype: bool
- :raises HoneycombError: When the response is not code 200: OK.
- """
-
- cmd = "pgrep -f karaf"
- path = HcUtil.read_path_from_url_file(
- "odl_client/odl_netconf_connector")
-
- try:
- HTTPRequest.get(node, path, timeout=10, enable_logging=False)
- raise HoneycombError("ODL client is still running.")
- except HTTPRequestError:
- logger.debug("Connection refused, checking process state....")
- ssh = SSH()
- ssh.connect(node)
- ret_code, _, _ = ssh.exec_command(cmd)
- if ret_code == 0:
- raise HoneycombError("ODL client is still running.")
-
- return True
-
- @staticmethod
- def mount_honeycomb_on_odl(node):
- """Tell ODL client to mount Honeycomb instance over netconf.
-
- :param node: Honeycomb node.
- :type node: dict
- :raises HoneycombError: When the response is not code 200: OK.
- """
-
- path = HcUtil.read_path_from_url_file(
- "odl_client/odl_netconf_connector")
-
- url_file = "{0}/{1}".format(Const.RESOURCES_TPL_HC,
- "odl_client/mount_honeycomb.json")
-
- with open(url_file) as template:
- data = template.read()
-
- data = loads(data)
-
- status_code, _ = HTTPRequest.post(
- node,
- path,
- headers={"Content-Type": "application/json",
- "Accept": "text/plain"},
- json=data,
- timeout=10,
- enable_logging=False)
-
- if status_code == HTTPCodes.OK:
- logger.info("ODL mount point configured successfully.")
- elif status_code == HTTPCodes.CONFLICT:
- logger.info("ODL mount point was already configured.")
- else:
- raise HoneycombError('Mount point configuration not successful')
-
- @staticmethod
- def stop_odl_client(node, path):
- """Stop ODL client service on the specified node.
-
- :param node: Node to start ODL client on.
- :param path: Path to ODL client.
- :type node: dict
- :type path: str
- :raises HoneycombError: If ODL client fails to stop.
- """
-
- ssh = SSH()
- ssh.connect(node)
-
- cmd = "{0}/*karaf*/bin/stop".format(path)
-
- ssh = SSH()
- ssh.connect(node)
- ret_code, _, _ = ssh.exec_command_sudo(cmd)
- if int(ret_code) != 0:
- logger.debug("ODL Client refused to shut down.")
- cmd = "pkill -f 'karaf'"
- (ret_code, _, _) = ssh.exec_command_sudo(cmd)
- if int(ret_code) != 0:
- raise HoneycombError('Node {0} failed to stop ODL.'.
- format(node['host']))
-
- logger.info("ODL client service stopped.")
-
- @staticmethod
- def set_static_arp(node, ip_address, mac_address):
- """Configure a static ARP entry using arp.
-
- :param node: Node in topology.
- :param ip_address: IP address for the entry.
- :param mac_address: MAC adddress for the entry.
- :type node: dict
- :type ip_address: str
- :type mac_address: str
- :raises RuntimeError: If the operation fails.
- """
-
- ssh = SSH()
- ssh.connect(node)
- ret_code, _, _ = ssh.exec_command_sudo("arp -s {0} {1}".format(
- ip_address, mac_address))
-
- if ret_code != 0:
- raise RuntimeError("Failed to configure static ARP adddress.")
-
-
-class HoneycombStartupConfig(object):
- """Generator for Honeycomb startup configuration.
- """
- def __init__(self):
- """Initializer."""
-
- self.template = """#!/bin/sh -
- STATUS=100
-
- while [ $STATUS -eq 100 ]
- do
- {java_call} -jar $(dirname $0)/{jar_filename}
- STATUS=$?
- echo "Honeycomb exited with status: $STATUS"
- if [ $STATUS -eq 100 ]
- then
- echo "Restarting..."
- fi
- done
- """
-
- self.java_call = "{scheduler} {affinity} java{jit_mode}{params}"
-
- self.scheduler = ""
- self.core_affinity = ""
- self.jit_mode = ""
- self.params = ""
- self.numa = ""
-
- self.config = ""
- self.ssh = SSH()
-
- def apply_config(self, node):
- """Generate configuration file /opt/honeycomb/honeycomb on the specified
- node.
-
- :param node: Honeycomb node.
- :type node: dict
- """
-
- self.ssh.connect(node)
- _, filename, _ = self.ssh.exec_command("ls /opt/honeycomb | grep .jar")
-
- java_call = self.java_call.format(scheduler=self.scheduler,
- affinity=self.core_affinity,
- jit_mode=self.jit_mode,
- params=self.params)
- self.config = self.template.format(java_call=java_call,
- jar_filename=filename)
-
- self.ssh.connect(node)
- cmd = "echo '{config}' > /tmp/honeycomb " \
- "&& chmod +x /tmp/honeycomb " \
- "&& sudo mv -f /tmp/honeycomb /opt/honeycomb".\
- format(config=self.config)
- self.ssh.exec_command(cmd)
-
- def set_cpu_scheduler(self, scheduler="FIFO"):
- """Use alternate CPU scheduler.
-
- Note: OTHER scheduler doesn't load-balance over isolcpus.
-
- :param scheduler: CPU scheduler to use.
- :type scheduler: str
- """
-
- schedulers = {"FIFO": "-f 99", # First In, First Out
- "RR": "-r 99", # Round Robin
- "OTHER": "-o", # Ubuntu default
- }
- self.scheduler = "chrt {0}".format(schedulers[scheduler])
-
- def set_cpu_core_affinity(self, low, high=None):
- """Set core affinity for the honeycomb process and subprocesses.
-
- :param low: Lowest core ID number.
- :param high: Highest core ID number. Leave empty to use a single core.
- :type low: int
- :type high: int
- """
-
- self.core_affinity = "taskset -c {low}-{high}".format(
- low=low, high=high if high else low)
-
- def set_jit_compiler_mode(self, jit_mode):
- """Set running mode for Java's JIT compiler.
-
- :param jit_mode: Desiret JIT mode.
- :type jit_mode: str
- """
-
- modes = {"client": " -client", # Default
- "server": " -server", # Higher performance but longer warmup
- "classic": " -classic" # Disables JIT compiler
- }
-
- self.jit_mode = modes[jit_mode]
-
- def set_memory_size(self, mem_min, mem_max=None):
- """Set minimum and maximum memory use for the JVM.
-
- :param mem_min: Minimum amount of memory (MB).
- :param mem_max: Maximum amount of memory (MB). Default is 4 times
- minimum value.
- :type mem_min: int
- :type mem_max: int
- """
-
- self.params += " -Xms{min}m -Xmx{max}m".format(
- min=mem_min, max=mem_max if mem_max else mem_min*4)
-
- def set_metaspace_size(self, mem_min, mem_max=None):
- """Set minimum and maximum memory used for class metadata in the JVM.
-
- :param mem_min: Minimum metaspace size (MB).
- :param mem_max: Maximum metaspace size (MB). Defailt is 4 times
- minimum value.
- :type mem_min: int
- :type mem_max: int
- """
-
- self.params += " -XX:MetaspaceSize={min}m " \
- "-XX:MaxMetaspaceSize={max}m".format(
- min=mem_min, max=mem_max if mem_max else mem_min*4)
-
- def set_numa_optimization(self):
- """Use optimization of memory use and garbage collection for NUMA
- architectures."""
-
- self.params += " -XX:+UseNUMA -XX:+UseParallelGC"
-
- def set_ssh_security_provider(self):
- """Disables BouncyCastle for SSHD."""
- # Workaround for issue described in:
- # https://wiki.fd.io/view/Honeycomb/Releases/1609/Honeycomb_and_ODL
-
- self.params += " -Dorg.apache.sshd.registerBouncyCastle=false"
diff --git a/resources/libraries/python/honeycomb/HoneycombUtil.py b/resources/libraries/python/honeycomb/HoneycombUtil.py
deleted file mode 100644
index 59483f4672..0000000000
--- a/resources/libraries/python/honeycomb/HoneycombUtil.py
+++ /dev/null
@@ -1,512 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Implementation of low level functionality used in communication with
-Honeycomb.
-
-Exception HoneycombError is used in all methods and in all modules with
-Honeycomb keywords.
-
-Class HoneycombUtil implements methods used by Honeycomb keywords. They must not
-be used directly in tests. Use keywords implemented in the module
-HoneycombAPIKeywords instead.
-"""
-
-from json import loads, dumps
-from enum import Enum, unique
-
-from robot.api import logger
-
-from resources.libraries.python.ssh import SSH
-from resources.libraries.python.HTTPRequest import HTTPRequest
-from resources.libraries.python.Constants import Constants as Const
-
-
-@unique
-class DataRepresentation(Enum):
- """Representation of data sent by PUT and POST requests."""
- NO_DATA = 0
- JSON = 1
- XML = 2
- TXT = 3
-
-
-# Headers used in requests. Key - content representation, value - header.
-HEADERS = {DataRepresentation.NO_DATA:
- {}, # It must be empty dictionary.
- DataRepresentation.JSON:
- {"Content-Type": "application/json",
- "Accept": "text/plain"},
- DataRepresentation.XML:
- {"Content-Type": "application/xml",
- "Accept": "text/plain"},
- DataRepresentation.TXT:
- {"Content-Type": "text/plain",
- "Accept": "text/plain"}
- }
-
-
-class HoneycombError(Exception):
-
- """Exception(s) raised by methods working with Honeycomb.
-
- When raising this exception, put this information to the message in this
- order:
-
- - short description of the encountered problem (parameter msg),
- - relevant messages if there are any collected, e.g., from caught
- exception (optional parameter details),
- - relevant data if there are any collected (optional parameter details).
-
- The logging is performed on two levels: 1. error - short description of the
- problem; 2. debug - detailed information.
- """
-
- def __init__(self, msg, details='', enable_logging=True):
- """Sets the exception message and enables / disables logging.
-
- It is not wanted to log errors when using these keywords together
- with keywords like "Wait until keyword succeeds". So you can disable
- logging by setting enable_logging to False.
-
- :param msg: Message to be displayed and logged.
- :param enable_logging: When True, logging is enabled, otherwise
- logging is disabled.
- :type msg: str
- :type enable_logging: bool
- """
- super(HoneycombError, self).__init__()
- self._msg = "{0}: {1}".format(self.__class__.__name__, msg)
- self._details = details
- if enable_logging:
- logger.debug(self._details)
-
- def __repr__(self):
- return repr(self._msg)
-
- def __str__(self):
- return str(self._msg)
-
-
-class HoneycombUtil(object):
- """Implements low level functionality used in communication with Honeycomb.
-
- There are implemented methods to get, put and delete data to/from Honeycomb.
- They are based on functionality implemented in the module HTTPRequests which
- uses HTTP requests GET, PUT, POST and DELETE to communicate with Honeycomb.
-
- It is possible to PUT the data represented as XML or JSON structures or as
- plain text.
- Data received in the response of GET are always represented as a JSON
- structure.
-
- There are also two supportive methods implemented:
-
- - read_path_from_url_file which reads URL file and returns a path (see
- docs/honeycomb_url_files.rst).
- - parse_json_response which parses data from response in JSON
- representation according to given path.
- """
-
- def __init__(self):
- pass
-
- @staticmethod
- def read_path_from_url_file(url_file):
- """Read path from .url file.
-
- For more information about .url file see docs/honeycomb_url_files.rst
-
- :param url_file: URL file. The argument contains only the name of file
- without extension, not the full path.
- :type url_file: str
- :returns: Requested path.
- :rtype: str
- """
-
- url_file = "{0}/{1}.url".format(Const.RESOURCES_TPL_HC, url_file)
- with open(url_file) as template:
- path = template.readline()
- return path
-
- @staticmethod
- def find_item(data, path):
- """Find a data item (single leaf or sub-tree) in data received from
- Honeycomb REST API.
-
- Path format:
- The path is a tuple with items navigating to requested data. The items
- can be strings or tuples:
-
- - string item represents a dictionary key in data,
- - tuple item represents list item in data.
-
- Example::
-
- data = \
- {
- "interfaces": {
- "interface": [
- {
- "name": "GigabitEthernet0/8/0",
- "enabled": "true",
- "type": "iana-if-type:ethernetCsmacd",
- },
- {
- "name": "local0",
- "enabled": "false",
- "type": "iana-if-type:ethernetCsmacd",
- }
- ]
- }
- }
-
- path = ("interfaces", ("interface", "name", "local0"), "enabled")
- This path points to "false".
-
- The tuple ("interface", "name", "local0") consists of::
-
- index 0 - dictionary key pointing to a list,
- index 1 - key which identifies an item in the list, it is also marked
- as the key in corresponding yang file.
- index 2 - key value.
-
- :param data: Data received from Honeycomb REST API.
- :param path: Path to data we want to find.
- :type data: dict
- :type path: tuple
- :returns: Data represented by path.
- :rtype: str, dict, or list
- :raises HoneycombError: If the data has not been found.
- """
-
- for path_item in path:
- try:
- if isinstance(path_item, str):
- data = data[path_item]
- elif isinstance(path_item, tuple):
- for data_item in data[path_item[0]]:
- if data_item[path_item[1]] == path_item[2]:
- data = data_item
- except KeyError as err:
- raise HoneycombError("Data not found: {0}".format(err))
-
- return data
-
- @staticmethod
- def remove_item(data, path):
- """Remove a data item (single leaf or sub-tree) in data received from
- Honeycomb REST API.
-
- :param data: Data received from Honeycomb REST API.
- :param path: Path to data we want to remove.
- :type data: dict
- :type path: tuple
- :returns: Original data without removed part.
- :rtype: dict
- """
-
- origin_data = previous_data = data
- try:
- for path_item in path:
- previous_data = data
- if isinstance(path_item, str):
- data = data[path_item]
- elif isinstance(path_item, tuple):
- for data_item in data[path_item[0]]:
- if data_item[path_item[1]] == path_item[2]:
- data = data_item
- except KeyError as err:
- logger.debug("Data not found: {0}".format(err))
- return origin_data
-
- if isinstance(path[-1], str):
- previous_data.pop(path[-1])
- elif isinstance(path[-1], tuple):
- previous_data[path[-1][0]].remove(data)
- if not previous_data[path[-1][0]]:
- previous_data.pop(path[-1][0])
-
- return origin_data
-
- @staticmethod
- def set_item_value(data, path, new_value):
- """Set or change the value (single leaf or sub-tree) in data received
- from Honeycomb REST API.
-
- If the item is not present in the data structure, it is created.
-
- :param data: Data received from Honeycomb REST API.
- :param path: Path to data we want to change or create.
- :param new_value: The value to be set.
- :type data: dict
- :type path: tuple
- :type new_value: str, dict or list
- :returns: Original data with the new value.
- :rtype: dict
- """
-
- origin_data = data
- for path_item in path[:-1]:
- if isinstance(path_item, str):
- try:
- data = data[path_item]
- except KeyError:
- data[path_item] = {}
- data = data[path_item]
- elif isinstance(path_item, tuple):
- try:
- flag = False
- index = 0
- for data_item in data[path_item[0]]:
- if data_item[path_item[1]] == path_item[2]:
- data = data[path_item[0]][index]
- flag = True
- break
- index += 1
- if not flag:
- data[path_item[0]].append({path_item[1]: path_item[2]})
- data = data[path_item[0]][-1]
- except KeyError:
- data[path_item] = []
-
- if not path[-1] in data.keys():
- data[path[-1]] = {}
-
- if isinstance(new_value, list) and isinstance(data[path[-1]], list):
- for value in new_value:
- data[path[-1]].append(value)
- else:
- data[path[-1]] = new_value
-
- return origin_data
-
- @staticmethod
- def get_honeycomb_data(node, url_file, path=""):
- """Retrieve data from Honeycomb according to given URL.
-
- :param node: Honeycomb node.
- :param url_file: URL file. The argument contains only the name of file
- without extension, not the full path.
- :param path: Path which is added to the base path to identify the data.
- :type node: dict
- :type url_file: str
- :type path: str
- :returns: Status code and content of response.
- :rtype: tuple
- """
-
- base_path = HoneycombUtil.read_path_from_url_file(url_file)
- path = base_path + path
- status_code, resp = HTTPRequest.get(node, path)
-
- try:
- data = loads(resp)
- except ValueError:
- logger.debug("Failed to deserialize JSON data.")
- data = None
-
- return status_code, data
-
- @staticmethod
- def put_honeycomb_data(node, url_file, data, path="",
- data_representation=DataRepresentation.JSON):
- """Send configuration data using PUT request and return the status code
- and response content.
-
- :param node: Honeycomb node.
- :param url_file: URL file. The argument contains only the name of file
- without extension, not the full path.
- :param data: Configuration data to be sent to Honeycomb.
- :param path: Path which is added to the base path to identify the data.
- :param data_representation: How the data is represented.
- :type node: dict
- :type url_file: str
- :type data: dict, str
- :type path: str
- :type data_representation: DataRepresentation
- :returns: Status code and content of response.
- :rtype: tuple
- :raises HoneycombError: If the given data representation is not defined
- in HEADERS.
- """
-
- try:
- header = HEADERS[data_representation]
- except AttributeError as err:
- raise HoneycombError("Wrong data representation: {0}.".
- format(data_representation), repr(err))
- if data_representation == DataRepresentation.JSON:
- data = dumps(data)
-
- logger.trace(data)
-
- base_path = HoneycombUtil.read_path_from_url_file(url_file)
- path = base_path + path
- logger.trace(path)
- return HTTPRequest.put(
- node=node, path=path, headers=header, payload=data)
-
- @staticmethod
- def post_honeycomb_data(node, url_file, data=None,
- data_representation=DataRepresentation.JSON,
- timeout=10):
- """Send a POST request and return the status code and response content.
-
- :param node: Honeycomb node.
- :param url_file: URL file. The argument contains only the name of file
- without extension, not the full path.
- :param data: Configuration data to be sent to Honeycomb.
- :param data_representation: How the data is represented.
- :param timeout: How long to wait for the server to send data before
- giving up.
- :type node: dict
- :type url_file: str
- :type data: dict, str
- :type data_representation: DataRepresentation
- :type timeout: int
- :returns: Status code and content of response.
- :rtype: tuple
- :raises HoneycombError: If the given data representation is not defined
- in HEADERS.
- """
-
- try:
- header = HEADERS[data_representation]
- except AttributeError as err:
- raise HoneycombError("Wrong data representation: {0}.".
- format(data_representation), repr(err))
- if data_representation == DataRepresentation.JSON:
- data = dumps(data)
-
- path = HoneycombUtil.read_path_from_url_file(url_file)
- return HTTPRequest.post(
- node=node, path=path, headers=header, payload=data, timeout=timeout)
-
- @staticmethod
- def delete_honeycomb_data(node, url_file, path=""):
- """Delete data from Honeycomb according to given URL.
-
- :param node: Honeycomb node.
- :param url_file: URL file. The argument contains only the name of file
- without extension, not the full path.
- :param path: Path which is added to the base path to identify the data.
- :type node: dict
- :type url_file: str
- :type path: str
- :returns: Status code and content of response.
- :rtype: tuple
- """
-
- base_path = HoneycombUtil.read_path_from_url_file(url_file)
- path = base_path + path
- return HTTPRequest.delete(node, path)
-
- @staticmethod
- def append_honeycomb_log(node, suite_name):
- """Append Honeycomb log for the current test suite to the full log.
-
- :param node: Honeycomb node.
- :param suite_name: Name of the current test suite. ${SUITE_NAME}
- variable in robotframework.
- :type node: dict
- :type suite_name: str
- """
-
- ssh = SSH()
- ssh.connect(node)
-
- ssh.exec_command(
- "echo '{separator}' >> /tmp/honeycomb.log".format(separator="="*80))
- ssh.exec_command(
- "echo 'Log for suite: {suite}' >> /tmp/honeycomb.log".format(
- suite=suite_name))
- ssh.exec_command(
- "cat {hc_log} >> /tmp/honeycomb.log".format(
- hc_log=Const.REMOTE_HC_LOG))
-
- @staticmethod
- def append_odl_log(node, odl_name, suite_name):
- """Append ODL karaf log for the current test suite to the full log.
-
- :param node: Honeycomb node.
- :param odl_name: Name of ODL client version to use.
- :param suite_name: Name of the current test suite. ${SUITE_NAME}
- variable in robotframework.
- :type node: dict
- :type odl_name: str
- :type suite_name: str
- """
-
- ssh = SSH()
- ssh.connect(node)
-
- ssh.exec_command(
- "echo '{separator}' >> /tmp/karaf.log".format(separator="="*80))
- ssh.exec_command(
- "echo 'Log for suite: {suite}' >> /tmp/karaf.log".format(
- suite=suite_name))
- ssh.exec_command(
- "cat /tmp/karaf_{odl_name}/data/log/karaf.log >> /tmp/karaf.log"
- .format(odl_name=odl_name))
-
- @staticmethod
- def clear_honeycomb_log(node):
- """Delete the Honeycomb log file for the current test suite.
-
- :param node: Honeycomb node.
- :type node: dict
- """
-
- ssh = SSH()
- ssh.connect(node)
-
- ssh.exec_command("sudo rm {hc_log}".format(hc_log=Const.REMOTE_HC_LOG))
-
- @staticmethod
- def archive_honeycomb_log(node, perf=False):
- """Copy honeycomb log file from DUT node to VIRL for archiving.
-
- :param node: Honeycomb node.
- :param perf: Alternate handling, for use with performance test topology.
- :type node: dict
- :type perf: bool
- """
-
- ssh = SSH()
- ssh.connect(node)
-
- if not perf:
- cmd = "cp /tmp/honeycomb.log /scratch/"
- ssh.exec_command_sudo(cmd, timeout=60)
- else:
- ssh.scp(
- ".",
- "/tmp/honeycomb.log",
- get=True,
- timeout=60)
- ssh.exec_command("rm /tmp/honeycomb.log")
-
- @staticmethod
- def archive_odl_log(node):
- """Copy ODL karaf log file from DUT node to VIRL for archiving.
-
- :param node: Honeycomb node.
- :type node: dict
- """
-
- ssh = SSH()
- ssh.connect(node)
-
- cmd = "cp /tmp/karaf.log /scratch/"
- ssh.exec_command_sudo(cmd, timeout=60)
diff --git a/resources/libraries/python/honeycomb/IPv6Management.py b/resources/libraries/python/honeycomb/IPv6Management.py
deleted file mode 100644
index deec041103..0000000000
--- a/resources/libraries/python/honeycomb/IPv6Management.py
+++ /dev/null
@@ -1,147 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Keywords used for setup and testing of Honeycomb's control-plane interface
-using IPv6.
-"""
-
-from resources.libraries.python.ssh import SSH
-
-
-class IPv6Management(object):
- """Utilities for managing IPv6 contol-plane interfaces."""
-
- def __init__(self):
- pass
-
- @staticmethod
- def get_interface_name_by_mac(node, mac):
- """Get the name of an interface using its MAC address.
-
- :param node: Node in topology.
- :param mac: MAC address.
- :type node: dict
- :type mac: str
- :returns: Name of the interface.
- :rtype: str
- :raises RuntimeError: If no interface is found.
- """
-
- cmd = " | ".join([
- "fgrep -ls '{0}' /sys/class/net/*/address".format(mac),
- "awk -F '/' '{print $5}'"
- ])
-
- ssh = SSH()
- ssh.connect(node)
- ret_code, stdout, _ = ssh.exec_command(cmd)
-
- if ret_code == 0:
- return stdout.strip()
- else:
- raise RuntimeError("No interface found using the specified MAC "
- "address.")
-
- @staticmethod
- def clear_interface_configuration(node, interface):
- """Remove all configured IP addresses from the specified interface
- and set it into down state.
-
- :param node: Node in topology.
- :param interface: Name of an interface on the node.
- :type node: dict
- :type interface: str
- :raises RuntimeError: If the configuration could not be cleared.
- """
-
- cmd = " && ".join([
- "sudo ip addr flush dev {interface}".format(interface=interface),
- "sudo ip link set dev {interface} down".format(interface=interface)
- ])
-
- ssh = SSH()
- ssh.connect(node)
- ret_code, _, _ = ssh.exec_command(cmd)
- if ret_code != 0:
- raise RuntimeError("Could not clear interface configuration.")
-
- @staticmethod
- def set_management_interface_address(node, interface, address, prefix):
- """Configure an IP address on the specified interface.
-
- :param node: Node in topology.
- :param interface: Name of an interface on the node.
- :param address: IP address to configure.
- :param prefix: IP network prefix.
- :type node: dict
- :type interface: str
- :type address: str
- :type prefix: int
- :raises RuntimeError: If the configuration fails.
- """
-
- ssh = SSH()
- ssh.connect(node)
-
- # Enable IPv6 for only the specified interface
- cmd = "sudo sysctl net.ipv6.conf.{0}.disable_ipv6=0".format(interface)
-
- ret_code, _, _ = ssh.exec_command(cmd)
- if ret_code != 0:
- raise RuntimeError("Could not enable IPv6 on interface.")
-
- # Configure IPv6 address on the interface
- cmd = "sudo ip address add {address}/{prefix} dev {interface}".format(
- interface=interface,
- address=address,
- prefix=prefix)
-
- ret_code, _, _ = ssh.exec_command(cmd)
- if ret_code != 0:
- raise RuntimeError("Could not configure IP address on interface.")
-
- # Set the interface up
- cmd = "sudo ip link set {interface} up".format(interface=interface)
-
- ret_code, _, _ = ssh.exec_command(cmd)
- if ret_code != 0:
- raise RuntimeError("Could not change the interface to 'up' state.")
-
- @staticmethod
- def configure_control_interface_tunnel(node, src_port, dst_ip, dst_port):
- """Configure a tunnel on the specified node, tunelling any IPv4 traffic
- from one port to the specified address.
-
- :param node: Node in topology.
- :param src_port: Port to tunnel traffic from.
- :param dst_ip: IP address to tunnel traffic to.
- :param dst_port: Port to tunnel traffic to.
- :type node: dict
- :type src_port: int
- :type dst_ip: str
- :type dst_port: int
- :raises RuntimeError: If tunnel creation is not successful.
- """
-
- cmd = "nohup socat TCP4-LISTEN:{src_port},fork,su=nobody " \
- "TCP6:[{dst_ip}]:{dst_port} $@ > " \
- "/tmp/socat.log 2>&1 &".format(
- src_port=src_port,
- dst_ip=dst_ip,
- dst_port=dst_port)
-
- ssh = SSH()
- ssh.connect(node)
- ret_code, _, _ = ssh.exec_command_sudo(cmd)
- if ret_code != 0:
- raise RuntimeError("Could not configure tunnel.")
diff --git a/resources/libraries/python/honeycomb/Lisp.py b/resources/libraries/python/honeycomb/Lisp.py
deleted file mode 100644
index 6ff6f834cc..0000000000
--- a/resources/libraries/python/honeycomb/Lisp.py
+++ /dev/null
@@ -1,671 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This module implements keywords to manipulate LISP data structures using
-Honeycomb REST API."""
-
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import DataRepresentation
-from resources.libraries.python.topology import Topology
-
-
-class LispKeywords(object):
- """Implementation of keywords which make it possible to:
- - enable/disable LISP feature
- - configure LISP mappings
- - configure locator sets
- - configure map resolver
- - configure LISP PITR feature
- - read operational data for all of the above
- """
-
- def __init__(self):
- """Initializer."""
- pass
-
- @staticmethod
- def _set_lisp_properties(node, path, data=None):
- """Set LISP properties and check the return code.
-
- :param node: Honeycomb node.
- :param path: Path which is added to the base path to identify the data.
- :param data: The new data to be set. If None, the item will be removed.
- :type node: dict
- :type path: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response to PUT is not
- 200 = OK or 201 = ACCEPTED.
- """
-
- if data:
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_lisp", data, path,
- data_representation=DataRepresentation.JSON)
- else:
- status_code, resp = HcUtil.\
- delete_honeycomb_data(node, "config_lisp", path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Lisp configuration unsuccessful. "
- "Status code: {0}.".format(status_code))
- else:
- return resp
-
- @staticmethod
- def get_lisp_operational_data(node):
- """Retrieve Lisp properties from Honeycomb operational data.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: List operational data.
- :rtype: bytearray
- """
-
- status_code, resp = HcUtil.get_honeycomb_data(node, "oper_lisp")
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError("Could not retrieve LISP operational data."
- "Status code: {0}.".format(status_code))
- else:
- # get rid of empty vni-table entry
- resp["lisp-state"]["lisp-feature-data"]["eid-table"][
- "vni-table"].remove(
- {
- "virtual-network-identifier": 0,
- "vrf-subtable": {"table-id": 0}
- }
- )
- return resp
-
- @staticmethod
- def verify_map_server_data_from_honeycomb(data, ip_addresses):
- """Verify whether MAP server data from Honeycomb is correct.
-
- :param data: LISP operational data containing map server IP addresses.
- :param ip_addresses: IP addresses to verify map server data against.
- :type data: dict
- :type ip_addresses: list
- :returns: Boolean Value indicating equality of IP Lists.
- :rtype: bool
- """
-
- data =\
- data['lisp-state']['lisp-feature-data']['map-servers']['map-server']
-
- data = sorted([entry['ip-address'] for entry in data])
- ip_addresses.sort()
-
- return data == ip_addresses
-
- @staticmethod
- def verify_map_server_data_from_vat(data, ip_addresses):
- """Verify whether MAP server data from VAT is correct.
-
- :param data: LISP operational data containing map server IP addresses.
- :param ip_addresses: IP addresses to verify map server data against.
- :type data: dict
- :type ip_addresses: list
- :returns: Boolean Value indicating equality of IP Lists.
- :rtype: bool
- """
-
- data = sorted([entry['map-server'] for entry in data])
- ip_addresses.sort()
-
- return data == ip_addresses
-
- @staticmethod
- def set_lisp_state(node, state=True):
- """Enable or disable the LISP feature.
-
- :param node: Honeycomb node.
- :param state: Enable or disable LISP.
- :type node: dict
- :type state: bool
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the return code is not 200:OK
- or 404:NOT FOUND.
- """
-
- ret_code, data = HcUtil.get_honeycomb_data(node, "config_lisp")
- if ret_code == HTTPCodes.OK:
- data["lisp"]["enable"] = bool(state)
- elif ret_code == HTTPCodes.NOT_FOUND:
- data = {"lisp": {"enable": bool(state)}}
- else:
- raise HoneycombError("Unexpected return code when getting existing"
- " LISP configuration.")
-
- return LispKeywords._set_lisp_properties(node, '', data)
-
- @staticmethod
- def set_rloc_probe_state(node, state=False):
- """Enable or disable the Routing Locator probe.
-
- :param node: Honeycomb node.
- :param state: Enable or Disable the Rloc probe.
- :type node: dict
- :type state: bool
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/lisp-feature-data/rloc-probe"
-
- data = {
- "rloc-probe": {
- "enabled": bool(state)
- }
- }
-
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def add_locator(node, interface, locator_set, priority=1, weight=1):
- """Configure a new LISP locator set.
-
- :param node: Honeycomb node.
- :param interface: An interface on the node.
- :param locator_set: Name for the new locator set.
- :param priority: Priority parameter for the locator.
- :param weight: Weight parameter for the locator.
- :type node: dict
- :type interface: str
- :type locator_set: str
- :type priority: int
- :type weight: int
- :returns: Content of response.
- :rtype: bytearray
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- path = "/lisp-feature-data/locator-sets/locator-set" \
- "/{0}".format(locator_set)
-
- data = {
- "locator-set": {
- "name": locator_set,
- "interface": {
- "interface-ref": interface,
- "priority": priority,
- "weight": weight
- }
- }
- }
-
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def configure_lisp_mapping(node, data):
- """Modify eid-table configuration to the data provided.
-
- :param node: Honeycomb node.
- :param data: Settings for the LISP mappings.
- :type node: dict
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/lisp-feature-data/eid-table"
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def configure_lisp_map_request_mode(node, option):
- """Modify LISP Map Request Mode configuration to the data provided.
-
- :param node: Honeycomb node.
- :param option: Settings for the LISP map request mode.
- :type node: dict
- :type option: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- data = {
- "map-request-mode": {
- "mode": option
- }
- }
-
- path = "/lisp-feature-data/map-request-mode"
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def add_lisp_adjacency(node, vni_id, map_name, adjacency_name, data):
- """Add an adjacency to an existing LISP mapping.
-
- :param node: Honeycomb node.
- :param vni_id: vni_id of the mapping.
- :param map_name: Name of the mapping.
- :param adjacency_name: Name for the new adjacency.
- :param data: Adjacency settings.
- :type node: dict
- :type vni_id: int
- :type map_name: str
- :type adjacency_name: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = (
- "/lisp-feature-data/eid-table/vni-table/{vni_id}/"
- "vrf-subtable/remote-mappings/remote-mapping/{map_name}/"
- "adjacencies/adjacency/{adjacency_name}"
- )
- path = path.format(
- vni_id=vni_id,
- map_name=map_name,
- adjacency_name=adjacency_name
- )
-
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def add_map_resolver(node, ip_address):
- """Configure map resolver with the specified IP address.
-
- :param node: Honeycomb node.
- :param ip_address: IP address to configure map resolver with.
- :type node: dict
- :type ip_address: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/lisp-feature-data/map-resolvers/map-resolver/{0}".format(
- ip_address)
-
- data = {
- "map-resolver": {
- "ip-address": ip_address
- }
- }
-
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def set_map_register(node, map_register=False):
- """Configure Map Register.
-
- :param node: Honeycomb node.
- :param map_register: Enable or disable Map Register.
- :type node: dict
- :type map_register: bool
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/lisp-feature-data/map-register"
-
- data = {
- "map-register": {
- "enabled": bool(map_register)
- }
- }
-
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def set_map_request_mode(node, src_dst=False):
- """Configure Map Request Mode.
-
- :param node: Honeycomb node.
- :param src_dst: Configure Map Request Mode with source destination.
- :type node: dict
- :type src_dst: bool
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/lisp-feature-data/map-request-mode"
-
- data = {
- "map-request-mode": {
- "mode": "source-destination" if src_dst
- else "target-destination"
- }
- }
-
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def delete_map_resolver(node):
- """Delete an existing map resolver.
-
- :param node: Honeycomb node
- :type node: dict
- :returns: Content of response
- :rtype: bytearray
- """
-
- path = "/lisp-feature-data/map-resolvers"
-
- return LispKeywords._set_lisp_properties(node, path)
-
- @staticmethod
- def add_map_server(node, *ip_addresses):
- """Configure map server with the specified IP addresses.
-
- :param node: Honeycomb node.
- :param ip_addresses: IP addresses to configure map server with.
- :type node: dict
- :type ip_addresses: list
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/lisp-feature-data/map-servers"
-
- data = {
- "map-servers": {
- "map-server": [
- {"ip-address": ip_address} for ip_address in ip_addresses
- ]
- }
- }
-
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def delete_map_server(node):
- """Delete all map servers.
-
- :param node: Honeycomb node
- :type node: dict
- :returns: Content of response
- :rtype: bytearray
- """
-
- path = "/lisp-feature-data/map-servers"
-
- return LispKeywords._set_lisp_properties(node, path)
-
- @staticmethod
- def configure_pitr(node, locator_set=None):
- """Configure PITR feature with the specified locator set. If not locator
- set is specified, disable PITR instead.
-
- :param node: Honeycomb node.
- :param locator_set: Name of a locator set. Optional.
- :type node: dict
- :type locator_set: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/lisp-feature-data/pitr-cfg"
-
- if locator_set:
- data = {
- "pitr-cfg": {
- "locator-set": locator_set
- }
- }
- else:
- data = None
-
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def configure_petr(node, ip_address):
- """Configure PETR feature with the specified IP. If no IP
- specified, disable PETR instead.
-
- :param node: Honeycomb node.
- :param ip_address: IPv6 address.
- :type node: dict
- :type ip_address: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/lisp-feature-data/petr-cfg"
-
- if ip_address:
- data = {
- "petr-cfg": {
- "petr-address": ip_address
- }
- }
- else:
- data = None
-
- return LispKeywords._set_lisp_properties(node, path, data)
-
- @staticmethod
- def disable_lisp(node):
- """Remove all LISP settings on the node.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- return LispKeywords._set_lisp_properties(node, "")
-
-
-class LispGPEKeywords(object):
- """Implementation of keywords which make it possible to:
- - enable/disable LISP GPE feature
- - configure LISP GPE forwarding entries
- - read operational data for all of the above
- """
-
- def __init__(self):
- """Initializer."""
- pass
-
- @staticmethod
- def _set_lispgpe_properties(node, path, data=None):
- """Set LISP GPE properties and check the return code.
-
- :param node: Honeycomb node.
- :param path: Path which is added to the base path to identify the data.
- :param data: The new data to be set. If None, the item will be removed.
- :type node: dict
- :type path: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response to PUT is not
- 200 = OK or 201 = ACCEPTED.
- """
-
- if data:
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_lisp_gpe", data, path,
- data_representation=DataRepresentation.JSON)
- else:
- status_code, resp = HcUtil.\
- delete_honeycomb_data(node, "config_lisp_gpe", path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Lisp GPE configuration unsuccessful. "
- "Status code: {0}.".format(status_code))
- else:
- return resp
-
- @staticmethod
- def get_lispgpe_operational_data(node):
- """Retrieve LISP GPE properties from Honeycomb operational data.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: LISP GPE operational data.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response to GET is not
- 200 = OK.
- """
-
- status_code, resp = HcUtil.get_honeycomb_data(node, "oper_lisp_gpe")
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError("Could not retrieve Lisp GPE operational data."
- "Status code: {0}.".format(status_code))
- else:
- return resp
-
- @staticmethod
- def get_lispgpe_mapping(node, name):
- """Retrieve LISP GPE operational data and parse for a specific mapping.
-
- :param node: Honeycomb node.
- :param name: Name of the mapping to look for.
- :type node: dict
- :type name: str
- :returns: LISP GPE mapping.
- :rtype: dict
- :raises HoneycombError: If the mapping is not present in operational
- data.
- """
-
- data = LispGPEKeywords.get_lispgpe_operational_data(node)
- try:
- data = data["gpe-state"]["gpe-feature-data"]["gpe-entry-table"] \
- ["gpe-entry"]
- except KeyError:
- raise HoneycombError("No mappings present in operational data.")
- for item in data:
- if item["id"] == name:
- mapping = item
- break
- else:
- raise HoneycombError("Mapping with name {name} not found in "
- "operational data.".format(name=name))
-
- return mapping
-
- @staticmethod
- def get_lispgpe_config_data(node):
- """Retrieve LISP GPE properties from Honeycomb config data.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: LISP GPE config data.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response to GET is not
- 200 = OK.
- """
-
- status_code, resp = HcUtil.get_honeycomb_data(node, "config_lisp_gpe")
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError("Could not retrieve Lisp GPE config data."
- "Status code: {0}.".format(status_code))
- else:
- return resp
-
- @staticmethod
- def set_lispgpe_state(node, state=True):
- """Enable or disable the LISP GPE feature.
-
- :param node: Honeycomb node.
- :param state: Enable or disable LISP.
- :type node: dict
- :type state: bool
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the return code is not 200:OK
- or 404:NOT FOUND.
- """
-
- ret_code, data = HcUtil.get_honeycomb_data(node, "config_lisp_gpe")
- if ret_code == HTTPCodes.OK:
- data["gpe"]["gpe-feature-data"]["enable"] = bool(state)
- elif ret_code == HTTPCodes.NOT_FOUND:
- data = {"gpe": {"gpe-feature-data": {"enable": bool(state)}}}
- else:
- raise HoneycombError("Unexpected return code when getting existing"
- " Lisp GPE configuration.")
-
- return LispGPEKeywords._set_lispgpe_properties(node, '', data)
-
- @staticmethod
- def configure_lispgpe_mapping(node, data=None):
- """Modify LISP GPE mapping configuration to the data provided.
-
- :param node: Honeycomb node.
- :param data: Settings for the LISP GPE mappings.
- :type node: dict
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/gpe-feature-data/gpe-entry-table"
- if data:
- data = {"gpe-entry-table": {"gpe-entry": data}}
- return LispGPEKeywords._set_lispgpe_properties(node, path, data)
- else:
- return LispGPEKeywords._set_lispgpe_properties(node, path)
-
- @staticmethod
- def add_lispgpe_mapping(node, name, data):
- """Add the specified LISP GPE mapping.
-
- :param node: Honeycomb node.
- :param name: Name for the mapping.
- :param data: Mapping details.
- :type node: dict
- :type name: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/gpe-feature-data/gpe-entry-table/gpe-entry/{name}".format(
- name=name)
-
- data = {"gpe-entry": data}
- return LispGPEKeywords._set_lispgpe_properties(node, path, data)
-
- @staticmethod
- def delete_lispgpe_mapping(node, mapping):
- """Delete the specified LISP GPE mapping from configuration.
-
- :param node: Honeycomb node.
- :param mapping: Name of the mapping to remove.
- :type node: dict
- :type mapping: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/gpe-feature-data/gpe-entry-table/gpe-entry/{0}".format(mapping)
- return LispGPEKeywords._set_lispgpe_properties(node, path)
-
- @staticmethod
- def disable_lispgpe(node):
- """Remove all LISP GPE settings on the node.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Content of response.
- :rtype: bytearray
- """
-
- return LispGPEKeywords._set_lispgpe_properties(node, "")
diff --git a/resources/libraries/python/honeycomb/NAT.py b/resources/libraries/python/honeycomb/NAT.py
deleted file mode 100644
index 759b801026..0000000000
--- a/resources/libraries/python/honeycomb/NAT.py
+++ /dev/null
@@ -1,143 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Keywords to manipulate NAT configuration using Honeycomb REST API."""
-
-from resources.libraries.python.topology import Topology
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import DataRepresentation
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-
-
-class NATKeywords(object):
- """Keywords for NAT configuration."""
-
- def __init__(self):
- pass
-
- @staticmethod
- def _set_nat_properties(node, path, data=None):
- """Set NAT properties and check the return code.
-
- :param node: Honeycomb node.
- :param path: Path which is added to the base path to identify the data.
- :param data: The new data to be set. If None, the item will be removed.
- :type node: dict
- :type path: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response to PUT is not
- OK or ACCEPTED.
- """
-
- if data:
- status_code, resp = HcUtil. \
- put_honeycomb_data(node, "config_nat", data, path,
- data_representation=DataRepresentation.JSON)
- else:
- status_code, resp = HcUtil. \
- delete_honeycomb_data(node, "config_nat", path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "The configuration of NAT was not successful. "
- "Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def get_nat_oper_data(node):
- """Read NAT operational data.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the operation fails or the response
- is not as expected.
- """
-
- status_code, resp = HcUtil.get_honeycomb_data(node, "oper_nat")
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError("Could not retrieve NAT operational data.")
-
- if "nat" not in resp.keys():
- raise HoneycombError(
- "Unexpected format, response does not contain nat container.")
- return resp['nat']
-
- @staticmethod
- def configure_nat_entries(node, data, instance=0, entry=1):
- """Configure NAT entries on node.
-
- :param node: Honeycomb node.
- :param data: Data to be configured on node.
- :param instance: NAT instance ID.
- :param entry: NAT entry index.
- :type node: dict
- :type data: dict
- :type instance: int
- :type entry: int
- :returns: Content of response.
- :rtype: bytearray
- """
-
- return NATKeywords._set_nat_properties(
- node,
- '/instances/instance/{0}/'
- 'mapping-table/mapping-entry/{1}/'.format(instance, entry),
- data)
-
- @staticmethod
- def configure_nat_on_interface(node, interface, direction, delete=False):
- """Configure NAT on the specified interface.
-
- :param node: Honeycomb node.
- :param interface: Name of an interface on the node.
- :param direction: NAT direction, outbound or inbound.
- :param delete: Delete an existing interface NAT configuration.
- :type node: dict
- :type interface: str
- :type direction: str
- :type delete: bool
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the operation fails.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
-
- interface = interface.replace("/", "%2F")
- path = "/interface/{0}/interface-nat:nat/{1}".format(
- interface, direction)
-
- data = {direction: {}}
-
- if delete:
- status_code, resp = HcUtil.delete_honeycomb_data(
- node, "config_vpp_interfaces", path)
- else:
- status_code, resp = HcUtil.put_honeycomb_data(
- node, "config_vpp_interfaces", data, path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Could not configure NAT on interface. "
- "Status code: {0}.".format(status_code))
-
- return resp
diff --git a/resources/libraries/python/honeycomb/Netconf.py b/resources/libraries/python/honeycomb/Netconf.py
deleted file mode 100644
index caca14ed1a..0000000000
--- a/resources/libraries/python/honeycomb/Netconf.py
+++ /dev/null
@@ -1,166 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Keywords used to connect to Honeycomb through Netconf, send messages
- and receive replies."""
-
-import socket
-from time import time
-
-import paramiko
-from robot.api import logger
-
-from resources.libraries.python.honeycomb.HoneycombUtil import HoneycombError
-
-
-class Netconf(object):
- """Implements methods for creating and managing Netconf sessions."""
-
- def __init__(self, delimiter=']]>]]>'):
- """Initializer.
-
- Note: Passing the channel object as a robotframework argument closes
- the channel. Class variables are used instead,
- to persist the connection channel throughout test cases.
- """
-
- self.client = None
- self.channel = None
- self.delimiter = delimiter
-
- def create_session(self, node, hello, time_out=10):
- """Create an SSH session, connect to Honeycomb on the specified node,
- open a communication channel to the Netconf subsystem and exchange hello
- messages.
-
- :param node: Honeycomb node.
- :param hello: Hello message and capability list to be sent to Honeycomb.
- :param time_out: Timeout value for the connection in seconds.
- :type node: dict
- :type hello: str
- :type time_out: int
- """
-
- start = time()
- client = paramiko.SSHClient()
- client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
-
- client.connect(node['host'],
- username=node['honeycomb']['user'],
- password=node['honeycomb']['passwd'],
- pkey=None,
- port=node['honeycomb']['netconf_port'],
- timeout=time_out)
-
- logger.trace('Connect took {0} seconds'.format(time() - start))
- logger.debug('New ssh: {0}'.format(client))
- logger.debug('Connect peer: {0}'.
- format(client.get_transport().getpeername()))
- logger.debug(client)
-
- channel = client.get_transport().open_session()
- channel.settimeout(time_out)
- channel.set_combine_stderr(True)
- channel.get_pty()
- channel.invoke_subsystem("netconf")
- logger.debug(channel)
-
- self.client = client
- self.channel = channel
-
- # read OpenDaylight's hello message and capability list
- self.get_response(
- size=131072,
- err="Timeout on getting hello message."
- )
-
- self.channel.send(hello)
- if not self.channel.active:
- raise HoneycombError("Channel closed on capabilities exchange.")
-
- def get_response(self, size=4096, err="Unspecified Error."):
- """Iteratively read data from the receive buffer and catenate together
- until message ends with the message delimiter, or
- until timeout is reached.
-
- :param size: Maximum number of bytes to read in one iteration.
- :param err: Error message to provide when timeout is reached.
- :type size: int
- :type err: str
- :returns: Content of response.
- :rtype: str
- :raises HoneycombError: If the read process times out.
- """
-
- reply = ''
-
- try:
- while not reply.endswith(self.delimiter) or \
- self.channel.recv_ready():
- try:
- chunk = self.channel.recv(size)
- if not chunk:
- break
- reply += chunk
- if self.channel.exit_status_ready():
- logger.debug('Channel exit status ready.')
- break
- except socket.timeout:
- raise HoneycombError("Socket timeout.",
- enable_logging=False)
-
- except RuntimeError:
- raise HoneycombError(err + " Content of buffer: {0}".format(reply),
- enable_logging=False)
-
- logger.trace(reply)
- return reply.replace(self.delimiter, "")
-
- def get_all_responses(self, size=4096):
- """Read responses from the receive buffer and catenate together
- until a read operation times out.
-
- :param size: Maximum number of bytes to read in one iteration.
- :type size: int
- :returns: Content of response.
- :rtype: str
- """
-
- response = ""
- err = "Expected timeout occurred."
-
- while True:
- try:
- response += self.get_response(size, err)
- except HoneycombError:
- break
-
- return response
-
- def send(self, message, **params):
- """Sends provided message through the channel.
-
- :param message: Message to be sent to Honeycomb.
- :param params: Format the message string with these parameters.
- :type message: str
- :type params: dict
- """
-
- message = message.format(**params)
-
- if not message.endswith(self.delimiter):
- message += self.delimiter
-
- logger.debug(message)
-
- self.channel.send(message)
diff --git a/resources/libraries/python/honeycomb/Notifications.py b/resources/libraries/python/honeycomb/Notifications.py
deleted file mode 100644
index 38f1fd3093..0000000000
--- a/resources/libraries/python/honeycomb/Notifications.py
+++ /dev/null
@@ -1,68 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Implementation of keywords for managing Honeycomb notifications."""
-
-from robot.api import logger
-
-from resources.libraries.python.honeycomb.HoneycombUtil import HoneycombError
-from resources.libraries.python.honeycomb.Netconf import Netconf
-
-
-class Notifications(Netconf):
- """Implements keywords for receiving Honeycomb notifications.
-
- The keywords implemented in this class make it possible to:
- - receive notifications from Honeycomb
- - read received notifications
- """
-
- def add_notification_listener(self, subscription):
- """Open a new channel on the SSH session, connect to Netconf subsystem
- and subscribe to receive Honeycomb notifications.
-
- :param subscription: RPC for subscription to notifications.
- :type subscription: str
- :raises HoneycombError: If subscription to notifications fails.
- """
-
- logger.debug(subscription)
- self.send(subscription)
-
- reply = self.get_response(
- err="Timeout on notifications subscription."
- )
-
- if "<ok/>" not in reply:
- raise HoneycombError("Notifications subscription failed with"
- " message: {0}".format(reply))
-
- logger.debug("Notifications subscription successful.")
-
- def get_notification(self, time_out=10):
- """Read and return the next notification message.
-
- :param time_out: Timeout value for the read operation in seconds.
- :type time_out: int
- :returns: Data received from buffer.
- :rtype: str
- """
-
- logger.debug("Getting notification. Timeout set to {0} seconds."
- .format(time_out))
-
- reply = self.get_response(
- err="Timeout on getting notification."
- )
-
- return reply
diff --git a/resources/libraries/python/honeycomb/Performance.py b/resources/libraries/python/honeycomb/Performance.py
deleted file mode 100644
index b81b9fd3db..0000000000
--- a/resources/libraries/python/honeycomb/Performance.py
+++ /dev/null
@@ -1,129 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Implementation of keywords for testing Honeycomb performance."""
-
-from resources.libraries.python.ssh import SSH
-from resources.libraries.python.Constants import Constants as Const
-from resources.libraries.python.honeycomb.HoneycombUtil import HoneycombError
-
-
-class Performance(object):
- """Keywords used in Honeycomb performance testing."""
-
- def __init__(self):
- """Initializer."""
- pass
-
- @staticmethod
- def configure_netconf_threads(node, threads):
- """Set Honeycomb's Netconf thread count in configuration.
-
- :param node: Honeycomb node.
- :param threads: Number of threads.
- :type node: dict
- :type threads: int
- :raises HoneycombError: If the operation fails.
- """
-
- find = "netconf-netty-threads"
- replace = '\\"netconf-netty-threads\\": {0},'.format(threads)
-
- argument = '"/{0}/c\\ {1}"'.format(find, replace)
- path = "{0}/config/netconf.json".format(Const.REMOTE_HC_DIR)
- command = "sed -i {0} {1}".format(argument, path)
-
- ssh = SSH()
- ssh.connect(node)
- (ret_code, _, stderr) = ssh.exec_command_sudo(command)
- if ret_code != 0:
- raise HoneycombError("Failed to modify configuration on "
- "node {0}, {1}".format(node, stderr))
-
- @staticmethod
- def run_traffic_script_on_dut(node, script, cores, reserved=2,
- *args, **kwargs):
- """Copy traffic script over to the specified node and execute with
- the provided arguments.
-
- :param node: Node in topology.
- :param script: Name of the script to execute.
- :param cores: Number of processor cores to use.
- :param reserved: Number of cores reserved for other tasks. Default is 2,
- one for system tasks and one for VPP main thread.
- :param args: Sequential arguments for the script.
- :param kwargs: Named arguments for the script.
- :type node: dict
- :type script: str
- :type cores: int
- :type reserved: int
- :type args: list
- :type kwargs: dict
- """
-
- path = "resources/traffic_scripts/honeycomb/{0}".format(script)
-
- # Assemble arguments for traffic script
- arguments = ""
- for arg in args:
- arguments += "{0} ".format(arg)
-
- for key, value in kwargs.items():
- arguments += "--{0} {1} ".format(key, value)
-
- ssh = SSH()
- ssh.connect(node)
- ssh.scp(path, "/tmp")
-
- # Use alternate scheduler, Ubuntu's default can't load-balance
- # over isolcpus
- scheduler = "chrt -f 99"
- core_afi = "taskset -c {first}-{last}".format(
- first=reserved, last=cores-1)
-
- cmd = "{scheduler} {affinity} python /tmp/{script} {args}".format(
- scheduler=scheduler,
- affinity=core_afi,
- script=script,
- args=arguments)
-
- ret_code, stdout, _ = ssh.exec_command_sudo(cmd, timeout=600)
-
- ssh.exec_command("sudo pkill python ; rm /tmp/{0}".format(script))
- if ret_code != 0:
- raise HoneycombError("Traffic script failed to execute.")
- for line in stdout.splitlines():
- if "Avg. requests" in line:
- return line
-
- @staticmethod
- def log_core_schedule(node, process):
- """Determine which cores the process' threads are running on.
-
- :param node: Honeycomb node.
- :param process: Name of the process.
- :type node: dict
- :type process: str
- """
-
- # Get info on process and all of its children
- cmd1 = """cat /proc/`pidof {0}`/task/*/stat""".format(process)
-
- # Parse process ID, name and core index
- cmd2 = """awk '{print $1" "$2" "$39}'"""
-
- cmd = "{0} | {1}".format(cmd1, cmd2)
-
- ssh = SSH()
- ssh.connect(node)
- ssh.exec_command(cmd)
diff --git a/resources/libraries/python/honeycomb/ProxyARP.py b/resources/libraries/python/honeycomb/ProxyARP.py
deleted file mode 100644
index adc525d279..0000000000
--- a/resources/libraries/python/honeycomb/ProxyARP.py
+++ /dev/null
@@ -1,232 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This module implements keywords to configure proxyARP using Honeycomb
-REST API."""
-
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import DataRepresentation
-from resources.libraries.python.topology import Topology
-
-
-class ProxyARPKeywords(object):
- """Implementation of keywords which make it possible to:
- - configure proxyARP behaviour
- - enable/disable proxyARP on individual interfaces
- """
-
- def __init__(self):
- """Initializer."""
- pass
-
- @staticmethod
- def configure_proxyarp(node, data):
- """Configure the proxyARP feature and check the return code.
-
- :param node: Honeycomb node.
- :param data: Configuration to use.
- :type node: dict
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response to PUT is not
- 200 = OK or 201 = ACCEPTED.
- """
-
- data = {
- "proxy-ranges": {
- "proxy-range": [
- data,
- ]
- }
- }
-
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_proxyarp_ranges", data,
- data_representation=DataRepresentation.JSON)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "proxyARP configuration unsuccessful. "
- "Status code: {0}.".format(status_code))
- else:
- return resp
-
- @staticmethod
- def remove_proxyarp_configuration(node):
- """Delete the proxyARP node, removing all of its configuration.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response is not 200 = OK.
- """
-
- status_code, resp = HcUtil. \
- delete_honeycomb_data(node, "config_proxyarp_ranges")
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "proxyARP removal unsuccessful. "
- "Status code: {0}.".format(status_code))
- else:
- return resp
-
- @staticmethod
- def get_proxyarp_operational_data(node):
- """Retrieve proxyARP properties from Honeycomb operational data.
- Note: The proxyARP feature has no operational data available.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: proxyARP operational data.
- :rtype: bytearray
- """
-
- raise NotImplementedError("Not supported in VPP.")
-
- @staticmethod
- def set_proxyarp_interface_config(node, interface, state):
- """Enable or disable the proxyARP feature on the specified interface.
-
- :param node: Honeycomb node.
- :param interface: Name or sw_if_index of an interface on the node.
- :param state: Desired proxyARP state: enable, disable.
- :type node: dict
- :type interface: str
- :type state: str
- :raises ValueError: If the state argument is incorrect.
- :raises HoneycombError: If the status code in response is not
- 200 = OK or 201 = ACCEPTED.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
- interface = interface.replace("/", "%2F")
-
- path = "/interface/{0}/proxy-arp".format(interface)
-
- if state == "disable":
- status_code, _ = HcUtil.delete_honeycomb_data(
- node, "config_vpp_interfaces", path)
- elif state == "enable":
- data = {"proxy-arp": {}}
- status_code, _ = HcUtil.put_honeycomb_data(
- node, "config_vpp_interfaces", data, path)
- else:
- raise ValueError("State argument has to be enable or disable.")
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "Interface proxyARP configuration on node {0} was not"
- " successful.".format(node["host"]))
-
- @staticmethod
- def get_proxyarp_interface_assignment(node, interface):
- """Read the status of proxyARP feature on the specified interface.
- Note: The proxyARP feature has no operational data available.
-
- :param node: Honeycomb node.
- :param interface: Name or sw_if_index of an interface on the node.
- :type node: dict
- :type interface: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- raise NotImplementedError("Not supported in VPP.")
-
-
-class IPv6NDProxyKeywords(object):
- """Keywords for IPv6 Neighbor Discovery proxy configuration."""
-
- def __init__(self):
- pass
-
- @staticmethod
- def configure_ipv6nd(node, interface, addresses=None):
- """Configure IPv6 Neighbor Discovery proxy on the specified interface,
- or remove/replace an existing configuration.
-
- :param node: Honeycomb node.
- :param interface: Name of an interface on the node.
- :param addresses: IPv6 addresses to configure ND proxy with. If no
- address is provided, ND proxy configuration will be removed.
- :type node: dict
- :type interface: str
- :type addresses: list
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the operation fails.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
- interface = interface.replace("/", "%2F")
-
- path = "/interface/{0}/ietf-ip:ipv6/nd-proxies".format(interface)
-
- if addresses is None:
- status_code, resp = HcUtil. \
- delete_honeycomb_data(node, "config_vpp_interfaces", path)
- else:
- data = {
- "nd-proxies": {
- "nd-proxy": [{"address": x} for x in addresses]
- }
- }
-
- status_code, resp = HcUtil. \
- put_honeycomb_data(node, "config_vpp_interfaces", data, path,
- data_representation=DataRepresentation.JSON)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- "IPv6 ND proxy configuration unsuccessful. "
- "Status code: {0}.".format(status_code))
- else:
- return resp
-
- @staticmethod
- def get_ipv6nd_configuration(node, interface):
- """Read IPv6 Neighbor Discovery proxy configuration on the specified
- interface.
-
- :param node: Honeycomb node.
- :param interface: Name of an interface on the node.
- :type node: dict
- :type interface: str
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the configuration could not be read.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, "name")
- interface = interface.replace("/", "%2F")
-
- path = "/interface/{0}/ietf-ip:ipv6/nd-proxies".format(interface)
-
- status_code, resp = HcUtil.get_honeycomb_data(
- node, "config_vpp_interfaces", path)
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Could not read IPv6 ND proxy configuration. "
- "Status code: {0}.".format(status_code))
- else:
- return resp
diff --git a/resources/libraries/python/honeycomb/Routing.py b/resources/libraries/python/honeycomb/Routing.py
deleted file mode 100644
index 314c3fe64d..0000000000
--- a/resources/libraries/python/honeycomb/Routing.py
+++ /dev/null
@@ -1,328 +0,0 @@
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This module implements keywords to manipulate routing tables using
-Honeycomb REST API."""
-
-from robot.api import logger
-
-from resources.libraries.python.topology import Topology
-from resources.libraries.python.HTTPRequest import HTTPCodes
-from resources.libraries.python.honeycomb.HoneycombSetup import HoneycombError
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import HoneycombUtil as HcUtil
-from resources.libraries.python.honeycomb.HoneycombUtil \
- import DataRepresentation
-from resources.libraries.python.VatExecutor import VatTerminal
-
-
-class RoutingKeywords(object):
- """Implementation of keywords which make it possible to:
- - add/remove routing tables,
- - add/remove routing table entries
- - get operational data about routing tables,
- """
-
- def __init__(self):
- pass
-
- @staticmethod
- def _set_routing_table_properties(node, path, data=None):
- """Set routing table properties and check the return code.
-
- :param node: Honeycomb node.
- :param path: Path which is added to the base path to identify the data.
- :param data: The new data to be set. If None, the item will be removed.
- :type node: dict
- :type path: str
- :type data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If the status code in response is not
- 200 = OK.
- """
-
- if data:
- status_code, resp = HcUtil.\
- put_honeycomb_data(node, "config_routing_table", data, path,
- data_representation=DataRepresentation.JSON)
- else:
- status_code, resp = HcUtil.\
- delete_honeycomb_data(node, "config_routing_table", path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- if data is None and '"error-tag":"data-missing"' in resp:
- logger.debug("data does not exist in path.")
- else:
- raise HoneycombError(
- "The configuration of routing table was not successful. "
- "Status code: {0}.".format(status_code))
- return resp
-
- @staticmethod
- def configure_routing_table(node, name, ip_version, data, vrf=1,
- special=False):
- """Configure a routing table according to the data provided.
-
- :param node: Honeycomb node.
- :param name: Name for the table.
- :param ip_version: IP protocol version, ipv4 or ipv6.
- :param data: Route configuration that should be set.
- :param vrf: vrf-id to attach configuration to.
- :param special: Must be True if the configuration is a special route.
- :type node: dict
- :type name: str
- :type ip_version: str
- :type data: dict
- :type vrf: int
- :type special: bool
- :returns: Content of response.
- :rtype: bytearray
- """
- if special:
- ip_version = "hc2vpp-ietf-{0}-unicast-routing:{0}".format(
- ip_version)
- protocol = "vpp-routing:vpp-protocol-attributes"
- else:
- ip_version = ip_version
- protocol = "vpp-protocol-attributes"
-
- full_data = {
- "control-plane-protocol": [
- {
- "name": name,
- "description": "hc2vpp-csit test route",
- "type": "static",
- protocol: {
- "primary-vrf": vrf
- },
- "static-routes": {
- ip_version: {
- "route": data
- }
- }
- }
- ]
- }
-
- path = "/control-plane-protocol/hc2vpp-ietf-routing:static/{0}".format(
- name)
- return RoutingKeywords._set_routing_table_properties(
- node, path, full_data)
-
- @staticmethod
- def delete_routing_table(node, name):
- """Delete the specified routing table from configuration data.
-
- :param node: Honeycomb node.
- :param name: Name of the table.
- :type node: dict
- :type name: str
- :returns: Content of response.
- :rtype: bytearray
- """
-
- path = "/control-plane-protocol/hc2vpp-ietf-routing:static/{0}".format(
- name)
- return RoutingKeywords._set_routing_table_properties(node, path)
-
- @staticmethod
- def get_routing_table_oper(node, name, ip_version):
- """Retrieve operational data about the specified routing table.
-
- :param node: Honeycomb node.
- :param name: Name of the routing table.
- :param ip_version: IP protocol version, ipv4 or ipv6.
- :type node: dict
- :type name: str
- :type ip_version: str
- :returns: Routing table operational data.
- :rtype: list
- :raises HoneycombError: If the operation fails.
- """
-
- path = "/control-plane-protocol/hc2vpp-ietf-routing:static/{0}".format(
- name)
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "oper_routing_table", path)
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational information about the "
- "routing tables. Status code: {0}.".format(status_code))
-
- data = RoutingKeywords.clean_routing_oper_data(
- resp['control-plane-protocol'][0]['static-routes']
- ['hc2vpp-ietf-{0}-unicast-routing:{0}'.format(ip_version)]['route'])
-
- return data
-
- @staticmethod
- def clean_routing_oper_data(data):
- """Prepare received routing operational data to be verified against
- expected data.
-
- :param data: Routing operational data.
- :type data: list
- :returns: Routing operational data without entry ID numbers.
- :rtype: list
- """
-
- for item in data:
- # ID values are auto-incremented based on existing routes in VPP
- item.pop("id", None)
- if "next-hop-list" in item.keys():
- for item2 in item["next-hop-list"]["next-hop"]:
- item2.pop("id", None)
-
- if "next-hop-list" in item.keys():
- # List items come in random order
- item["next-hop-list"]["next-hop"].sort()
-
- return data
-
- @staticmethod
- def log_routing_configuration(node):
- """Retrieve route configuration using VAT and print the response
- to robot log.
-
- :param node: VPP node.
- :type node: dict
- """
-
- with VatTerminal(node) as vat:
- vat.vat_terminal_exec_cmd("ip_fib_dump")
-
- @staticmethod
- def configure_interface_slaac(node, interface, slaac_data=None):
- """Configure SLAAC on the specified interfaces.
-
- :param node: Honeycomb node.
- :param interface: Interface to configure SLAAC.
- :param slaac_data: Dictionary of configurations to apply. \
- If it is None then the existing configuration is removed.
- :type node: dict
- :type interface: str
- :type slaac_data: dict of dicts
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If RA could not be configured.
- """
-
- interface = Topology.convert_interface_reference(
- node, interface, 'name')
- interface = interface.replace('/', '%2F')
- path = 'interface/' + interface + '/ipv6/ipv6-router-advertisements'
-
- if not slaac_data:
- status_code, _ = HcUtil.delete_honeycomb_data(
- node, 'config_slaac', path)
- else:
- data = {
- 'ipv6-router-advertisements': slaac_data
- }
-
- status_code, _ = HcUtil.put_honeycomb_data(
- node, 'config_slaac', data, path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- 'Configuring SLAAC failed. Status code:{0}'.format(status_code))
-
- @staticmethod
- def get_interface_slaac_oper_data(node, interface):
- """Get operational data about SLAAC table present on the node.
-
- :param node: Honeycomb node.
- :param interface: Interface SLAAC data are retrieved from.
- :type node: dict
- :type interface: str
- :returns: dict of SLAAC operational data.
- :rtype: dict
- :raises HoneycombError: If status code differs from successful.
- """
- interface = Topology.convert_interface_reference(
- node, interface, 'name')
- interface = interface.replace('/', '%2F')
- path = 'interface/' + interface + '/ipv6/ipv6-router-advertisements'
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "config_slaac", path)
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational information about SLAAC. "
- "Status code: {0}.".format(status_code))
- try:
- dict_of_str = resp[
- 'hc2vpp-ietf-ipv6-unicast-routing:ipv6-router-advertisements']
- return {k: str(v) for k, v in dict_of_str.items()}
- except (KeyError, TypeError):
- return {}
-
- @staticmethod
- def configure_policer(node, policy_name, policer_data=None):
- """Configure Policer on the specified node.
-
- :param node: Honeycomb node.
- :param policer_data: Dictionary of configurations to apply. \
- If it is None then the existing configuration is removed.
- :type node: dict
- :type policer_data: dict
- :returns: Content of response.
- :rtype: bytearray
- :raises HoneycombError: If policer could not be configured.
- """
-
- path = '/' + policy_name
-
- if not policer_data:
- status_code, _ = HcUtil.delete_honeycomb_data(
- node, 'config_policer', path)
- else:
- data = {
- 'policer': policer_data
- }
-
- status_code, _ = HcUtil.put_honeycomb_data(
- node, 'config_policer', data, path)
-
- if status_code not in (HTTPCodes.OK, HTTPCodes.ACCEPTED):
- raise HoneycombError(
- 'Configuring policer failed. Status code:{0}'\
- .format(status_code))
-
- @staticmethod
- def get_policer_oper_data(node, policy_name):
- """Get operational data about Policer on the node.
-
- :param node: Honeycomb node.
- :type node: dict
- :returns: dict of Policer operational data.
- :rtype: dict
- :raises HoneycombError: If status code differs from successful.
- """
-
- path = '/' + policy_name
-
- status_code, resp = HcUtil.\
- get_honeycomb_data(node, "oper_policer", path)
-
- if status_code != HTTPCodes.OK:
- raise HoneycombError(
- "Not possible to get operational information about Policer. "
- "Status code: {0}.".format(status_code))
- try:
- return resp['policer']
- except (KeyError, TypeError):
- return {}
diff --git a/resources/libraries/python/honeycomb/__init__.py b/resources/libraries/python/honeycomb/__init__.py
deleted file mode 100644
index c35326d604..0000000000
--- a/resources/libraries/python/honeycomb/__init__.py
+++ /dev/null
@@ -1,16 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""
-__init__ file for directory resources/libraries/python/honeycomb
-"""