feat(density): Delete ipsec nfv_density tests

They are broken for more than two years
and they relied on CLIs that changed in VPP anyway.

Ticket: CSIT-1856

Change-Id: I0f278ff61a9da5e6040e08bf3e92049cb33c8a93
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 0 insertions, 117 deletions

diff --git a/resources/libraries/python/IPsecUtil.py b/resources/libraries/python/IPsecUtil.py
index 8ecfbc3d98..19995e547d 100644
--- a/resources/libraries/python/IPsecUtil.py
+++ b/resources/libraries/python/IPsecUtil.py
@@ -1891,123 +1891,6 @@ class IPsecUtil:
             scp_node(nodes[dut], script_filename, script_filename)
 
     @staticmethod
-    def vpp_ipsec_create_tunnel_interfaces_in_containers(
-        nodes: dict,
-        if1_ip_addr: str,
-        if2_ip_addr: str,
-        n_tunnels: int,
-        crypto_alg: CryptoAlg,
-        integ_alg: Optional[IntegAlg],
-        raddr_ip1: str,
-        raddr_ip2: str,
-        raddr_range: int,
-        n_instances: int,
-    ) -> None:
-        """Create multiple IPsec tunnel interfaces between two VPP nodes.
-
-        :param nodes: VPP nodes to create tunnel interfaces.
-        :param if1_ip_addr: VPP node 1 interface IP4 address.
-        :param if2_ip_addr: VPP node 2 interface IP4 address.
-        :param n_tunnels: Number of tunnell interfaces to create.
-        :param crypto_alg: The encryption algorithm name.
-        :param integ_alg: The integrity algorithm name.
-        :param raddr_ip1: Policy selector remote IPv4 start address for the
-            first tunnel in direction node1->node2.
-        :param raddr_ip2: Policy selector remote IPv4 start address for the
-            first tunnel in direction node2->node1.
-        :param raddr_range: Mask specifying range of Policy selector Remote
-            IPv4 addresses. Valid values are from 1 to 32.
-        :param n_instances: Number of containers.
-        :type nodes: dict
-        :type if1_ip_addr: str
-        :type if2_ip_addr: str
-        :type n_tunnels: int
-        :type crypto_alg: CryptoAlg
-        :type integ_alg: Optional[IntegAlg]
-        :type raddr_ip1: str
-        :type raddr_ip2: str
-        :type raddr_range: int
-        :type n_instances: int
-        """
-        spi_1 = 100000
-        spi_2 = 200000
-        addr_incr = 1 << (32 - raddr_range)
-
-        dut1_scripts = IPsecUtil._create_ipsec_script_files("DUT1", n_instances)
-        dut2_scripts = IPsecUtil._create_ipsec_script_files("DUT2", n_instances)
-
-        for cnf in range(0, n_instances):
-            dut1_scripts[cnf].write(
-                "create loopback interface\nset interface state loop0 up\n\n"
-            )
-            dut2_scripts[cnf].write(
-                f"ip route add {if1_ip_addr}/8 via"
-                f" {ip_address(if2_ip_addr) + cnf + 100} memif1/{cnf + 1}\n\n"
-            )
-
-        for tnl in range(0, n_tunnels):
-            cnf = tnl % n_instances
-            ckey = getattr(
-                gen_key(IPsecUtil.get_crypto_alg_key_len(crypto_alg)), "hex"
-            )
-            integ = ""
-            ikey = getattr(
-                gen_key(IPsecUtil.get_integ_alg_key_len(integ_alg)), "hex"
-            )
-            if integ_alg:
-                integ = (
-                    f"integ-alg {integ_alg.alg_name}"
-                    f" local-integ-key {ikey}"
-                    f" remote-integ-key {ikey}"
-                )
-            # Configure tunnel end point(s) on left side
-            dut1_scripts[cnf].write(
-                "set interface ip address loop0"
-                f" {ip_address(if1_ip_addr) + tnl * addr_incr}/32\n"
-                "create ipsec tunnel"
-                f" local-ip {ip_address(if1_ip_addr) + tnl * addr_incr}"
-                f" local-spi {spi_1 + tnl}"
-                f" remote-ip {ip_address(if2_ip_addr) + cnf}"
-                f" remote-spi {spi_2 + tnl}"
-                f" crypto-alg {crypto_alg.alg_name}"
-                f" local-crypto-key {ckey}"
-                f" remote-crypto-key {ckey}"
-                f" instance {tnl // n_instances}"
-                f" salt 0x0 {integ}\n"
-                f"set interface unnumbered ipip{tnl // n_instances} use loop0\n"
-                f"set interface state ipip{tnl // n_instances} up\n"
-                f"ip route add {ip_address(raddr_ip2)+tnl}/32"
-                f" via ipip{tnl // n_instances}\n\n"
-            )
-            # Configure tunnel end point(s) on right side
-            dut2_scripts[cnf].write(
-                f"set ip neighbor memif1/{cnf + 1}"
-                f" {ip_address(if1_ip_addr) + tnl * addr_incr}"
-                f" 02:02:00:00:{17:02X}:{cnf:02X} static\n"
-                f"create ipsec tunnel local-ip {ip_address(if2_ip_addr) + cnf}"
-                f" local-spi {spi_2 + tnl}"
-                f" remote-ip {ip_address(if1_ip_addr) + tnl * addr_incr}"
-                f" remote-spi {spi_1 + tnl}"
-                f" crypto-alg {crypto_alg.alg_name}"
-                f" local-crypto-key {ckey}"
-                f" remote-crypto-key {ckey}"
-                f" instance {tnl // n_instances}"
-                f" salt 0x0 {integ}\n"
-                f"set interface unnumbered ipip{tnl // n_instances}"
-                f" use memif1/{cnf + 1}\n"
-                f"set interface state ipip{tnl // n_instances} up\n"
-                f"ip route add {ip_address(raddr_ip1) + tnl}/32"
-                f" via ipip{tnl // n_instances}\n\n"
-            )
-
-        IPsecUtil._close_and_copy_ipsec_script_files(
-            "DUT1", nodes, n_instances, dut1_scripts
-        )
-        IPsecUtil._close_and_copy_ipsec_script_files(
-            "DUT2", nodes, n_instances, dut2_scripts
-        )
-
-    @staticmethod
     def vpp_ipsec_add_multiple_tunnels(
         nodes: dict,
         interface1: Union[str, int],