aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/python
diff options
context:
space:
mode:
authorselias <samelias@cisco.com>2017-08-15 19:33:50 +0200
committerTibor Frank <tifrank@cisco.com>2017-10-09 14:46:24 +0000
commit442a2a7b0dfd2f1cd5a4ba03fb91ed32c96f8965 (patch)
treee1b97e0254606bcca42f8588ad9896dad17ffe07 /resources/libraries/python
parente65ba17d162581fa8b803070a5e706f344c30f33 (diff)
CSIT-775 HC Test: CRUD over IPv6 control-plane interface
Adds new test suite which accesses Honeycomb's Restconf and Netconf northbound over IPv6. This is done by sending the requests to TG where an IPv4 to IPv6 tunnel is configured to the Honeycomb DUT. Change-Id: I3b7467d8108b0da9756e632851215c66ed41bb61 Signed-off-by: selias <samelias@cisco.com>
Diffstat (limited to 'resources/libraries/python')
-rw-r--r--resources/libraries/python/VPPUtil.py32
-rw-r--r--resources/libraries/python/honeycomb/HoneycombSetup.py15
-rw-r--r--resources/libraries/python/honeycomb/HoneycombUtil.py2
-rw-r--r--resources/libraries/python/honeycomb/IPv6Management.py147
4 files changed, 180 insertions, 16 deletions
diff --git a/resources/libraries/python/VPPUtil.py b/resources/libraries/python/VPPUtil.py
index da59d1958d..5881d18966 100644
--- a/resources/libraries/python/VPPUtil.py
+++ b/resources/libraries/python/VPPUtil.py
@@ -46,3 +46,35 @@ class VPPUtil(object):
ssh.connect(node)
for _, value in def_setting_tb_displayed.items():
ssh.exec_command_sudo('vppctl sh {}'.format(value))
+
+ @staticmethod
+ def stop_vpp_service(node):
+ """Stop VPP service on the specified node.
+
+ :param node: VPP node.
+ :type node: dict
+ :raises RuntimeError: If VPP fails to stop.
+ """
+
+ ssh = SSH()
+ ssh.connect(node)
+ cmd = "service vpp stop"
+ ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=80)
+ if int(ret_code) != 0:
+ raise RuntimeError("VPP service did not shut down gracefully.")
+
+ @staticmethod
+ def start_vpp_service(node):
+ """start VPP service on the specified node.
+
+ :param node: VPP node.
+ :type node: dict
+ :raises RuntimeError: If VPP fails to start.
+ """
+
+ ssh = SSH()
+ ssh.connect(node)
+ cmd = "service vpp start"
+ ret_code, _, _ = ssh.exec_command_sudo(cmd)
+ if int(ret_code) != 0:
+ raise RuntimeError("VPP service did not start.")
diff --git a/resources/libraries/python/honeycomb/HoneycombSetup.py b/resources/libraries/python/honeycomb/HoneycombSetup.py
index 975a36c753..d10a5ccb4e 100644
--- a/resources/libraries/python/honeycomb/HoneycombSetup.py
+++ b/resources/libraries/python/honeycomb/HoneycombSetup.py
@@ -637,21 +637,6 @@ class HoneycombSetup(object):
logger.info("ODL client service stopped.")
- @staticmethod
- def stop_vpp_service(node):
- """Stop VPP service on the specified node.
-
- :param node: VPP node.
- :type node: dict
- :raises RuntimeError: If VPP fails to stop.
- """
-
- ssh = SSH()
- ssh.connect(node)
- cmd = "service vpp stop"
- ret_code, _, _ = ssh.exec_command_sudo(cmd, timeout=80)
- if int(ret_code) != 0:
- logger.debug("VPP service refused to shut down.")
class HoneycombStartupConfig(object):
diff --git a/resources/libraries/python/honeycomb/HoneycombUtil.py b/resources/libraries/python/honeycomb/HoneycombUtil.py
index 86feb78d94..b7338d3ed8 100644
--- a/resources/libraries/python/honeycomb/HoneycombUtil.py
+++ b/resources/libraries/python/honeycomb/HoneycombUtil.py
@@ -448,7 +448,7 @@ class HoneycombUtil(object):
if not perf:
cmd = "cp /tmp/honeycomb.log /scratch/"
- ssh.exec_command_sudo(cmd)
+ ssh.exec_command_sudo(cmd, timeout=60)
else:
ssh.scp(
".",
diff --git a/resources/libraries/python/honeycomb/IPv6Management.py b/resources/libraries/python/honeycomb/IPv6Management.py
new file mode 100644
index 0000000000..deec041103
--- /dev/null
+++ b/resources/libraries/python/honeycomb/IPv6Management.py
@@ -0,0 +1,147 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Keywords used for setup and testing of Honeycomb's control-plane interface
+using IPv6.
+"""
+
+from resources.libraries.python.ssh import SSH
+
+
+class IPv6Management(object):
+ """Utilities for managing IPv6 contol-plane interfaces."""
+
+ def __init__(self):
+ pass
+
+ @staticmethod
+ def get_interface_name_by_mac(node, mac):
+ """Get the name of an interface using its MAC address.
+
+ :param node: Node in topology.
+ :param mac: MAC address.
+ :type node: dict
+ :type mac: str
+ :returns: Name of the interface.
+ :rtype: str
+ :raises RuntimeError: If no interface is found.
+ """
+
+ cmd = " | ".join([
+ "fgrep -ls '{0}' /sys/class/net/*/address".format(mac),
+ "awk -F '/' '{print $5}'"
+ ])
+
+ ssh = SSH()
+ ssh.connect(node)
+ ret_code, stdout, _ = ssh.exec_command(cmd)
+
+ if ret_code == 0:
+ return stdout.strip()
+ else:
+ raise RuntimeError("No interface found using the specified MAC "
+ "address.")
+
+ @staticmethod
+ def clear_interface_configuration(node, interface):
+ """Remove all configured IP addresses from the specified interface
+ and set it into down state.
+
+ :param node: Node in topology.
+ :param interface: Name of an interface on the node.
+ :type node: dict
+ :type interface: str
+ :raises RuntimeError: If the configuration could not be cleared.
+ """
+
+ cmd = " && ".join([
+ "sudo ip addr flush dev {interface}".format(interface=interface),
+ "sudo ip link set dev {interface} down".format(interface=interface)
+ ])
+
+ ssh = SSH()
+ ssh.connect(node)
+ ret_code, _, _ = ssh.exec_command(cmd)
+ if ret_code != 0:
+ raise RuntimeError("Could not clear interface configuration.")
+
+ @staticmethod
+ def set_management_interface_address(node, interface, address, prefix):
+ """Configure an IP address on the specified interface.
+
+ :param node: Node in topology.
+ :param interface: Name of an interface on the node.
+ :param address: IP address to configure.
+ :param prefix: IP network prefix.
+ :type node: dict
+ :type interface: str
+ :type address: str
+ :type prefix: int
+ :raises RuntimeError: If the configuration fails.
+ """
+
+ ssh = SSH()
+ ssh.connect(node)
+
+ # Enable IPv6 for only the specified interface
+ cmd = "sudo sysctl net.ipv6.conf.{0}.disable_ipv6=0".format(interface)
+
+ ret_code, _, _ = ssh.exec_command(cmd)
+ if ret_code != 0:
+ raise RuntimeError("Could not enable IPv6 on interface.")
+
+ # Configure IPv6 address on the interface
+ cmd = "sudo ip address add {address}/{prefix} dev {interface}".format(
+ interface=interface,
+ address=address,
+ prefix=prefix)
+
+ ret_code, _, _ = ssh.exec_command(cmd)
+ if ret_code != 0:
+ raise RuntimeError("Could not configure IP address on interface.")
+
+ # Set the interface up
+ cmd = "sudo ip link set {interface} up".format(interface=interface)
+
+ ret_code, _, _ = ssh.exec_command(cmd)
+ if ret_code != 0:
+ raise RuntimeError("Could not change the interface to 'up' state.")
+
+ @staticmethod
+ def configure_control_interface_tunnel(node, src_port, dst_ip, dst_port):
+ """Configure a tunnel on the specified node, tunelling any IPv4 traffic
+ from one port to the specified address.
+
+ :param node: Node in topology.
+ :param src_port: Port to tunnel traffic from.
+ :param dst_ip: IP address to tunnel traffic to.
+ :param dst_port: Port to tunnel traffic to.
+ :type node: dict
+ :type src_port: int
+ :type dst_ip: str
+ :type dst_port: int
+ :raises RuntimeError: If tunnel creation is not successful.
+ """
+
+ cmd = "nohup socat TCP4-LISTEN:{src_port},fork,su=nobody " \
+ "TCP6:[{dst_ip}]:{dst_port} $@ > " \
+ "/tmp/socat.log 2>&1 &".format(
+ src_port=src_port,
+ dst_ip=dst_ip,
+ dst_port=dst_port)
+
+ ssh = SSH()
+ ssh.connect(node)
+ ret_code, _, _ = ssh.exec_command_sudo(cmd)
+ if ret_code != 0:
+ raise RuntimeError("Could not configure tunnel.")