HONEYCOMB: Remove

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I60d80564050cb786c7b1e0a08f31f8292f82197e

1 files changed, 0 insertions, 375 deletions

diff --git a/resources/libraries/robot/honeycomb/honeycomb.robot b/resources/libraries/robot/honeycomb/honeycomb.robot
deleted file mode 100644
index cf89229dfd..0000000000
--- a/resources/libraries/robot/honeycomb/honeycomb.robot
+++ /dev/null
@@ -1,375 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.honeycomb.HoneycombSetup
-| Library | resources.libraries.python.honeycomb.HoneycombUtil
-| Library | resources.libraries.python.honeycomb.HcPersistence
-| Library | resources.libraries.python.DUTSetup
-| Library | resources.libraries.python.InterfaceUtil
-| Resource | resources/libraries/robot/shared/default.robot
-
-*** Keywords ***
-| Configure Honeycomb service on DUTs
-| | [Documentation] | *Setup environment for honeycomb testing.*
-| | ...
-| | ... | _Setup steps:_
-| | ... | - 1. Login to each honeycomb node using ssh
-| | ... | - 2. Startup honeycomb service
-| | ... | - 3. Monitor service startup using HTTP GET request loop
-| | ... | Expected sequence of HTTP replies:
-| | ... | connection refused -> 404 -> 401 -> 503 or 500 -> 200 (pass)
-| | ... | - 4. Configure honeycomb nodes using HTTP PUT request
-| | ...
-| | ... | _Arguments:_
-| | ... | - duts - list of nodes to setup Honeycomb on
-| | ...
-| | ... | _Used global constants and variables:_
-| | ... | - RESOURCES_TPL_HC - path to honeycomb templates directory
-| | ... | - HTTPCodes - HTTP protocol status codes
-| | ...
-| | [Arguments] | @{duts}
-| | Start honeycomb on DUTs | @{duts}
-| | :FOR | ${dut} | IN | @{duts}
-| | | Check honeycomb startup state | @{duts}
-| | | Sleep | 5s | Make sure all modules are loaded and ready.
-
-| Stop Honeycomb service on DUTs
-| | [Documentation] | *Cleanup environment after honeycomb testing.*
-| | ...
-| | ... | _Teardown steps:_
-| | ... | - 1. Login to each honeycomb node using ssh
-| | ... | - 2. Stop honeycomb service
-| | ... | - 3. Monitor service shutdown using HTTP GET request loop
-| | ... | Expected sequence of HTTP replies:
-| | ... | 200 -> 404 -> connection refused (pass)
-| | ...
-| | ... | _Arguments:_
-| | ... | - duts - list of nodes to stop Honeycomb on
-| | ...
-| | ... | _Used global constants and variables:_
-| | ... | - RESOURCES_TPL_HC - path to honeycomb templates directory
-| | ... | - HTTPCodes - HTTP protocol status codes
-| | ...
-| | [Arguments] | @{duts}
-| | Stop honeycomb on DUTs | @{duts}
-| | :FOR | ${dut} | IN | @{duts}
-| | | Wait until keyword succeeds | 60sec | 15sec
-| | | ... | Check honeycomb shutdown state | @{duts}
-
-| Clear persisted Honeycomb configuration
-| | [Documentation] | *Delete saved configuration.*
-| | ...
-| | ... | *Arguments:*
-| | ... | - duts - one or more nodes to clear persistence on. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Clear persisted Honeycomb configuration \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | @{duts}
-| | Clear persisted Honeycomb config | @{duts}
-
-| Restart Honeycomb and VPP and clear persisted configuration
-| | [Documentation] | Restarts Honeycomb and VPP with default configuration.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Restart Honeycomb and VPP and clear persisted configuration \
-| | ... | \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Stop Honeycomb service on DUTs | ${node}
-| | Clear persisted Honeycomb configuration | ${node}
-| | Restart Vpp Service | ${node}
-| | Verify Vpp | ${node}
-| | VPP Enable Traces On DUT | ${node}
-| | Configure Honeycomb service on DUTs | ${node}
-
-| Restart Honeycomb and VPP
-| | [Documentation] | Stops the Honeycomb service and verifies it is stopped.
-| | ... | Then restarts VPP, starts Honeycomb again and verifies it is running.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Restart Honeycomb and VPP \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Stop Honeycomb service on DUTs | ${node}
-| | Restart Vpp Service | ${node}
-| | Verify Vpp | ${node}
-| | VPP Enable Traces On DUT | ${node}
-| | Configure Honeycomb service on DUTs | ${node}
-
-| Restart Honeycomb and VPP in performance test
-| | [Documentation] | Stops Honeycomb and VPP and verifies HC is stopped.
-| | ... | Then restarts VPP, starts Honeycomb again and verifies it is running.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Restart Honeycomb and VPP \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Stop Honeycomb service on DUTs | ${node}
-| | Restart Vpp Service | ${node}
-| | Verify Vpp | ${node}
-| | VPP Enable Traces On DUT | ${node}
-| | Configure Honeycomb service on DUTs | ${node}
-| | Check honeycomb startup state | ${node} | timeout=120
-
-| Archive Honeycomb logs
-| | [Documentation] | Copies log files from Honeycomb node\
-| | ... | to test executor.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - perf - Running on performance testbed? Yes/no Type: boolean
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Archive Honeycomb logs \| ${nudes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node} | ${perf}=${False}
-| | Archive Honeycomb log | ${node} | ${perf}
-| | Archive ODL log | ${node}
-
-| Configure ODL Client Service On DUT
-| | [Documentation] | Configure and start ODL client, then repeatedly check if
-| | ... | it is running.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - odl_name - Name of ODL client version. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Configure ODL Client Service on DUT \| ${nodes['DUT1']} \
-| | ... | \| carbon-SR1 \|
-| | ...
-| | [Arguments] | ${node} | ${odl_name}
-| | Copy ODL Client | ${node} | ${odl_name} | /mnt/common | /tmp
-| | Setup ODL Client | ${node} | /tmp
-| | Wait until keyword succeeds | 3min | 30sec
-| | ... | Install ODL Features | ${node} | /tmp
-| | Wait until keyword succeeds | 4min | 15sec
-| | ... | Mount Honeycomb on ODL | ${node}
-| | Wait until keyword succeeds | 2min | 15sec
-| | ... | Check ODL startup state | ${node}
-| | Check honeycomb startup state | ${node} | timeout=120
-
-| Configure Honeycomb for functional testing
-| | [Documentation] | Configure Honeycomb with parameters for functional
-| | ... | testing, then start Honeycomb and repeatedly check startup status.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Configure Honeycomb for functional testing \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Configure Restconf binding address | ${node}
-| | Configure Log Level | ${node} | TRACE
-| | Configure Persistence | ${node} | disable
-| | Configure jVPP timeout | ${node} | ${10}
-| | Generate Honeycomb startup configuration for ODL test | ${node}
-| | Clear Persisted Honeycomb Configuration | ${node}
-| | Configure Honeycomb service on DUTs | ${node}
-
-| Configure ODL Client for functional testing
-| | [Documentation] | Read external variable HC_ODL. Depending on its
-| | ... | value either: do nothing, or setup ODL client for testing and
-| | ... | create a global variable that modifies Restconf requests to use ODL.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Configure ODL Client for functional testing \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | ${use_odl_client}= | Get Variable Value | ${HC_ODL}
-| | Run Keyword If | '${use_odl_client}' != '${NONE}'
-| | ... | Run Keywords
-| | ... | Set Global Variable | ${use_odl_client} | AND
-| | ... | Configure ODL Client Service On DUT | ${node} | ${use_odl_client}
-| | ... | ELSE | Log | Variable HC_ODL is not present. Not using ODL.
-| | ... | level=INFO
-
-| Set Up Honeycomb Functional Test Suite
-| | [Documentation] | Generic test suite setup for Honeycomb functional tests.
-| | ... | Restarts VPP, then enables Honeycomb and optionally ODL, based
-| | ... | on external variable.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Set Up Honeycomb Functional Test Suite \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Restart Vpp Service | ${node}
-| | Verify Vpp | ${node}
-| | VPP Enable Traces On DUT | ${node}
-| | All TGs Set Interface Default Driver | ${nodes}
-| | Configure Honeycomb for functional testing | ${node}
-| | Configure ODL Client for functional testing | ${node}
-
-| Tear Down Honeycomb Functional Test Suite
-| | [Documentation] | Generic test suite teardown for Honeycomb functional
-| | ... | tests. Stops ODL client (if used), then stops Honeycomb and verifies
-| | ... | that they are both stopped.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Tear Down Honeycomb Functional Test Suite \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Append suite to Honeycomb log file | ${node}
-| | ${use_odl_client}= | Get Variable Value | ${HC_ODL}
-| | Run Keyword If | '${use_odl_client}' != '${NONE}'
-| | ... | Run Keywords
-| | ... | Append suite to ODL log file | ${node} | ${use_odl_client} | AND
-| | ... | Stop ODL Client | ${node} | /tmp | AND
-| | ... | Wait until keyword succeeds | 3min | 15sec
-| | ... | Check ODL shutdown state | ${node} | AND
-| | ... | Set Global Variable | ${use_odl_client} | ${NONE}
-| | Stop Honeycomb service on DUTs | ${node}
-| | Clear Honeycomb Log | ${node}
-| | Stop VPP Service | ${node}
-
-| Enable Honeycomb Feature
-| | [Documentation] | Enable the specified feature in Honeycomb configuration.
-| | ... | Requires a restart of Honeycomb to take effect.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Enable Honeycomb Feature \| ${nodes['DUT1']} \| NSH \|
-| | ...
-| | [arguments] | ${node} | ${feature}
-| | Manage Honeycomb Features | ${node} | ${feature}
-
-| Disable Honeycomb Feature
-| | [Documentation] | Disable the specified feature in Honeycomb configuration.
-| | ... | Requires a restart of Honeycomb to take effect.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Disable Honeycomb Feature \| ${nodes['DUT1']} \| NSH \|
-| | ...
-| | [arguments] | ${node} | ${feature}
-| | Manage Honeycomb Features | ${node} | ${feature} | disable=${True}
-
-| Honeycomb Performance Suite Setup Generic
-| | [Documentation] | Generic test suite setup for Honeycomb performance tests.
-| | ... | Performs multiple attempts to start Honeycomb+VPP stack.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb Performance Suite Setup Generic \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Wait until keyword succeeds | 8min | 2min
-| | ... | Restart Honeycomb and VPP in Performance test | ${node}
-
-| Honeycomb Performance Suite Teardown Generic
-| | [Documentation] | Generic test suite teardown for Honeycomb performance
-| | ... | tests. Logs CPU usage before stopping Honeycomb.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb Performance Suite Teardown Generic \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Log Honeycomb and VPP process distribution on cores | ${node}
-| | Append suite to Honeycomb log file | ${node}
-| | Stop Honeycomb service on DUTs | ${node}
-| | Clear Honeycomb Log | ${node}
-| | Stop VPP Service | ${node}
-
-| Append suite to Honeycomb log file
-| | [Documentation] | Add the contents of honeycomb.log for the current suite\
-| | ... | to the full log which will be archived.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Append suite to Honeycomb log file \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Append Honeycomb log | ${node} | ${SUITE_NAME}
-
-| Append suite to ODL log file
-| | [Documentation] | Add the contents of ODL karaf.log for the current suite\
-| | ... | to the full log which will be archived.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - odl_name - name of ODL client version. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Append suite to ODL karaf log file \| ${nodes['DUT1']} \
-| | ... | \| Oxygen \|
-| | ...
-| | [Arguments] | ${node} | ${odl_name}
-| | Append ODL log | ${node} | ${odl_name} | ${SUITE_NAME}
-
-| Generate Honeycomb startup configuration for ODL test
-| | [Documentation] | Create HC startup configuration and apply to config
-| | ... | file on DUT. Requires Honeycomb restart to take effect.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - Honeycomb node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Generate Honeycomb startup configuration for ODL test \
-| | ... | \| ${nodes[DUT1]} \|
-| | ...
-| | [Arguments] | ${node}
-| | Import Library | resources.libraries.python.honeycomb.HoneycombSetup.HoneycombStartupConfig
-| | ... | WITH NAME | HC_config
-| | Run Keyword | HC_config.Set SSH Security provider
-| | Run Keyword | HC_config.Set Memory Size | ${32}
-| | Run Keyword | HC_config.Set Metaspace Size | ${32}
-| | Run Keyword | HC_config.Apply config | ${node}