HONEYCOMB: Remove

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I60d80564050cb786c7b1e0a08f31f8292f82197e

1 files changed, 0 insertions, 144 deletions

diff --git a/resources/libraries/robot/honeycomb/tap.robot b/resources/libraries/robot/honeycomb/tap.robot
deleted file mode 100644
index 37d6a02f52..0000000000
--- a/resources/libraries/robot/honeycomb/tap.robot
+++ /dev/null
@@ -1,144 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
-| Documentation | Keywords used to manipulate TAP interfaces.
-
-*** Keywords ***
-| Honeycomb creates TAP interface
-| | [Documentation] | Uses Honeycomb API to configure a new TAP interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - settings - Configuration data for TAP. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb creates TAP interface \
-| | ... | \| ${nodes['DUT1']} \| tap_int1 \| ${{'host-interface-name':'tap1',\
-| | ... | 'mac':'08:00:27:60:26:ab', 'id':3}} \|
-| | ...
-| | [Arguments] | ${node} | ${interface} | ${settings}
-| | Create TAP interface | ${node} | ${interface}
-| | ... | &{settings}
-
-| Honeycomb configures TAP interface
-| | [Documentation] | Uses Honeycomb API to configure an existing TAP interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - settings - Configuration data for TAP. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ... | \| Honeycomb configures TAP interface \
-| | ... | \| ${nodes['DUT1']} \| tap_int1 \| ${{'host-interface-name':'tap1',\
-| | ... | 'mac':'08:00:27:60:26:ab', 'id':3}} \|
-| | ...
-| | [Arguments] | ${node} | ${interface} | ${settings}
-| | Configure interface TAP | ${node} | ${interface}
-| | ... | &{settings}
-
-| Honeycomb removes TAP interface
-| | [Documentation] | Uses Honeycomb API to remove a TAP interface.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Honeycomb removes TAP interface \
-| | ... | \| ${nodes['DUT1']} \| tap_int1 \|
-| | [Arguments] | ${node} | ${interface}
-| | Delete interface | ${node} | ${interface}
-
-| TAP Operational Data From Honeycomb Should Be
-| | [Documentation] | Retrieves interface TAP configuration through Honeycomb\
-| | ... | and compares with settings supplied in argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ... | - settings - Configuration data for TAP. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| TAP Operational Data From Honeycomb Should Be \
-| | ... | \| ${nodes['DUT1']} \| tap_int1 \| ${{'host-interface-name':'tap1',\
-| | ... | 'mac':'08:00:27:60:26:ab', 'id':3}} \|
-| | ...
-| | [Arguments] | ${node} | ${interface} | ${settings}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | ${api_tap}= | Set Variable | ${api_data['v3po:tap-v2']}
-| | Should be equal | ${api_tap['device-name']} | ${settings['device-name']}
-| | ${api_mac}= | Set Variable | ${api_data['phys-address']}
-| | Should be equal | ${api_mac} | ${settings['mac']}
-
-| TAP Operational Data From VAT Should Be
-| | [Documentation] | Retrieves interface TAP configuration through VAT and\
-| | ... | compares with settings supplied in argument.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - settings - Configuration data for TAP. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| TAP Operational Data From Honeycomb Should Be \
-| | ... | \| ${nodes['DUT1']} \| ${{'host-interface-name':'tap1',\
-| | ... | 'mac':'08:00:27:60:26:ab', 'id':3}} \|
-| | ...
-| | [Arguments] | ${node} | ${interface} | ${settings}
-| | ${vat_data}= | TAP Dump | ${node} | ${interface}
-| | Should be equal | ${vat_data['dev_name']} | ${settings['dev_name']}
-| | Should be equal | ${vat_data['rx_ring_sz']} | ${settings['rx_ring_sz']}
-| | Should be equal | ${vat_data['tx_ring_sz']} | ${settings['tx_ring_sz']}
-# other settings not accessible through VAT commands
-
-| TAP Operational Data From Honeycomb Should Be empty
-| | [Documentation] | Attempts to retrieve interface TAP configuration\
-| | ... | through Honeycomb and expects to recieve an empty dictionary.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| TAP Operational Data From Honeycomb Should Be empty\
-| | ... | \| ${nodes['DUT1']} \| tap_int1 \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | ${api_data}= | Get interface oper data | ${node} | ${interface}
-| | Run keyword and expect error | *KeyError: 'v3po:tap-v2' | Set Variable
-| | ... | ${api_data['v3po:tap-v2']}
-
-| TAP Operational Data From VAT Should Be empty
-| | [Documentation] | Attempts to retrieve interface TAP configuration\
-| | ... | through VAT and expects a "no data" error.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ... | - interface - name of an interface on the specified node. Type: string
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| TAP Operational Data From VAT Should Be empty\
-| | ... | \| ${nodes['DUT1']} \| tap_int1 \|
-| | ...
-| | [Arguments] | ${node} | ${interface}
-| | ${data}= | TAP Dump | ${node} | ${interface}
-| | Should be empty | ${data}