CSIT-775 HC Test: CRUD over IPv6 control-plane interface

Adds new test suite which accesses Honeycomb's Restconf and Netconf northbound
over IPv6. This is done by sending the requests to TG where an IPv4 to IPv6
tunnel is configured to the Honeycomb DUT.

Change-Id: I3b7467d8108b0da9756e632851215c66ed41bb61
Signed-off-by: selias <samelias@cisco.com>

2 files changed, 44 insertions, 13 deletions

diff --git a/resources/libraries/robot/honeycomb/honeycomb.robot b/resources/libraries/robot/honeycomb/honeycomb.robot
index fa5cea7978..cb2e58e2fc 100644
--- a/resources/libraries/robot/honeycomb/honeycomb.robot
+++ b/resources/libraries/robot/honeycomb/honeycomb.robot
@@ -284,19 +284,6 @@
 | | [arguments] | ${node} | ${feature}
 | | Manage Honeycomb Features | ${node} | ${feature} | disable=${True}
 
-| Stop VPP Service on DUT
-| | [Documentation] | Stop the VPP service on the specified node.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - information about a DUT node. Type: dictionary
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Stop VPP Service on DUT \| ${nodes['DUT1']} \|
-| | ...
-| | [Arguments] | ${node}
-| | Stop VPP Service | ${node}
-
 | Honeycomb Performance Suite Setup Generic
 | | [Documentation] | Generic test suite setup for Honeycomb performance tests.
 | | ... | Performs multiple attempts to start Honeycomb+VPP stack.
diff --git a/resources/libraries/robot/honeycomb/ipv6_control.robot b/resources/libraries/robot/honeycomb/ipv6_control.robot
new file mode 100644
index 0000000000..8e50a31927
--- /dev/null
+++ b/resources/libraries/robot/honeycomb/ipv6_control.robot
@@ -0,0 +1,44 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.honeycomb.DHCP.DHCPRelayKeywords
+| Library | resources.libraries.python.Dhcp.DhcpProxy
+| Library | resources.libraries.python.DUTSetup
+| Documentation | Keywords used to test Honeycomb DHCP features.
+
+*** Keywords ***
+| Convert data-plane interface to control-plane
+| | [Documentation] | Unbinds an interface from VPP and binds it to kernel\
+| | ... | driver specified in topology.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - Information about a DUT node. Type: dictionary
+| | ... | - bd_name - Name of the interface in topology. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Convert data-plane interface to control-plane \| ${nodes['DUT1']} \
+| | ... | \| port3 \|
+| | ...
+| | [Arguments] | ${node} | ${interface}
+| | ${new_driver}= | Get Variable Value
+| | ... | ${node['interfaces']['${interface}']['driver']}
+| | PCI Driver Unbind | ${node}
+| | ... | ${node['interfaces']['${interface}']['pci_address']}
+| | Run Keyword If | '${new_driver}' == 'None'
+| | ... | PCI Driver Bind | ${node}
+| | ... | ${node['interfaces']['${interface}']['pci_address']} | virtio-pci
+| | ... | ELSE
+| | ... | PCI Driver Bind | ${node}
+| | ... | ${node['interfaces']['${interface}']['pci_address']} | ${new_driver}