diff options
author | Jan Gelety <jgelety@cisco.com> | 2020-08-06 03:34:31 +0200 |
---|---|---|
committer | Jan Gelety <jgelety@cisco.com> | 2020-08-07 22:03:19 +0200 |
commit | ff1f49d9ba97ddfee3229907e3a344503e072578 (patch) | |
tree | 44897453f4cddb795ea8adb4cb05af2d12a6f975 /resources/libraries/robot/ip/nat.robot | |
parent | 42d1016e92cf2b8ba4e493d878c475de325a447a (diff) |
Perf: NAT44 endpoint-dependent mode - udp, part I
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was
reached limit of changes (1000)
Jira: CSIT-1711
- udp synthetic profiles w/o data packets
- udp cps perf tests, phase I (no special "search cps" KW)
Part I means that we are using MRR tests to collect traffic data
until there is ready new CPS test type with corresponding algorithm.
Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378
Signed-off-by: Jan Gelety <jgelety@cisco.com>
Diffstat (limited to 'resources/libraries/robot/ip/nat.robot')
-rw-r--r-- | resources/libraries/robot/ip/nat.robot | 127 |
1 files changed, 61 insertions, 66 deletions
diff --git a/resources/libraries/robot/ip/nat.robot b/resources/libraries/robot/ip/nat.robot index e1c302e98a..8a970cf556 100644 --- a/resources/libraries/robot/ip/nat.robot +++ b/resources/libraries/robot/ip/nat.robot @@ -72,86 +72,81 @@ | | | | Show NAT | ${node} -| Initialize NAT44 in circular topology -| | [Documentation] | Initialization of 2-node / 3-node topology with NAT44 -| | ... | between DUTs: +| Initialize NAT44 deterministic mode in circular topology +| | [Documentation] | Initialization of NAT44 deterministic mode on DUT1 +| | +| | Configure inside and outside interfaces +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0] +| | Configure deterministic mode for NAT44 +| | ... | ${dut1} | ${in_net} | ${in_mask} | ${out_net} | ${out_mask} + +| Initialize NAT44 endpoint-dependent mode in circular topology +| | [Documentation] | Initialization of NAT44 endpoint-dependent mode on DUT1 +| | +| | Configure inside and outside interfaces +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0] +| | Set NAT44 Address Range +| | ... | ${dut1} | ${out_net} | ${out_net_end} + +# TODO: Remove when 'ip4.Initialize IPv4 forwarding in circular topology' KW +# adapted to use IP values from variables +| Initialize IPv4 forwarding for NAT44 in circular topology +| | [Documentation] +| | ... | Set IPv4 forwarding for NAT44: | | ... | - set interfaces up | | ... | - set IP addresses | | ... | - set ARP | | ... | - create routes -| | ... | - set NAT44 - only on DUT1 | | -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error +| | ${status} | ${value}= | Run Keyword And Ignore Error | | ... | Variable Should Exist | ${dut2} +| | ${dut2_status}= | Set Variable If | '${status}' == 'PASS' | ${True} +| | ... | ${False} | | | | Set interfaces in path up | | -| | ${tg_if1_ip4}= | Get Variable Value | ${tg_if1_ip4} | 10.0.0.2 -| | ${tg_if1_mask}= | Get Variable Value | ${tg_if1_mask} | 20 -| | ${tg_if2_ip4}= | Get Variable Value | ${tg_if2_ip4} | 12.0.0.2 -| | ${tg_if2_mask}= | Get Variable Value | ${tg_if2_mask} | 20 -| | ${dut1_if1_ip4}= | Get Variable Value | ${dut1_if1_ip4} | 10.0.0.1 -| | ${dut1_if1_mask}= | Get Variable Value | ${dut1_if1_mask} | 20 -| | ${dut1_if2_ip4}= | Get Variable Value | ${dut1_if2_ip4} | 11.0.0.1 -| | ${dut1_if2_mask}= | Get Variable Value | ${dut2_if2_mask} | 20 -| | ${dut2_if1_ip4}= | Get Variable Value | ${dut2_if1_ip4} | 11.0.0.2 -| | ${dut2_if1_mask}= | Get Variable Value | ${dut2_if1_mask} | 20 -| | ${dut2_if2_ip4}= | Get Variable Value | ${dut2_if2_ip4} | 12.0.0.1 -| | ${dut2_if2_mask}= | Get Variable Value | ${dut2_if2_mask} | 20 -| | ${inside_net}= | Get Variable Value | ${inside_net} | 192.168.0.0 -| | ${inside_mask}= | Get Variable Value | ${inside_mask} | 16 -| | ${nat_net}= | Get Variable Value | ${nat_net} | 109.146.163.128 -| | ${nat_mask}= | Get Variable Value | ${nat_mask} | 26 -| | ${dest_net}= | Get Variable Value | ${dest_net} | 20.0.0.0 -| | ${dest_mask}= | Get Variable Value | ${dest_mask} | 24 -| | -| | VPP Interface Set IP Address | ${dut1} | ${DUT1_${int}1}[0] -| | ... | ${dut1_if1_ip4} | ${dut1_if1_mask} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut1} | ${DUT1_${int}2}[0] -| | ... | ${dut1_if2_ip4} | ${dut1_if2_mask} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut2} | ${DUT2_${int}1}[0] -| | ... | ${dut2_if1_ip4} | ${dut2_if1_mask} -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${DUT2_${int}2}[0] -| | ... | ELSE | Set Variable | ${DUT1_${int}2}[0] -| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | ${dut2_if2_ip4} -| | ... | ${dut2_if2_mask} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut1_if1_ip4} | ${dut1_if1_mask} +| | VPP Interface Set IP Address +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut1_if2_ip4} | ${dut1_if2_mask} +| | Run Keyword If | ${dut2_status} +| | ... | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut2_if1_ip4} | ${dut2_if1_mask} +| | Run Keyword If | ${dut2_status} +| | ... | VPP Interface Set IP Address +| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${dut2_if2_ip4} | ${dut2_if2_mask} | | | | VPP Add IP Neighbor | | ... | ${dut1} | ${DUT1_${int}1}[0] | ${tg_if1_ip4} | ${TG_pf1_mac}[0] -| | Run Keyword If | '${dut2_status}' == 'PASS' +| | Run Keyword If | ${dut2_status} | | ... | VPP Add IP Neighbor | | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut2_if1_ip4} | | ... | ${DUT2_${int}1_mac}[0] -| | Run Keyword If | '${dut2_status}' == 'PASS' +| | ... | ELSE | VPP Add IP Neighbor +| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${tg_if2_ip4} | ${TG_pf2_mac}[0] +| | Run Keyword If | ${dut2_status} | | ... | VPP Add IP Neighbor -| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut1_if2_ip4} +| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${dut1_if1_ip4} | | ... | ${DUT1_${int}2_mac}[0] -| | VPP Add IP Neighbor -| | ... | ${dut} | ${dut_if2} | ${tg_if2_ip4} | ${TG_pf2_mac}[0] -| | -| | Vpp Route Add | ${dut1} | ${inside_net} | ${inside_mask} -| | ... | gateway=${tg_if1_ip4} | interface=${DUT1_${int}1}[0] -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | ${dest_net} | ${dest_mask} -| | ... | gateway=${dut2_if1_ip4} | interface=${DUT1_${int}2}[0] -| | Run Keyword Unless | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | ${dest_net} | ${dest_mask} -| | ... | gateway=${tg_if2_ip4} | interface=${DUT1_${int}2}[0] -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | ${dest_net} | ${dest_mask} -| | ... | gateway=${tg_if2_ip4} | interface=${DUT2_${int}2}[0] -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | ${nat_net} | ${nat_mask} -| | ... | gateway=${dut1_if2_ip4} | interface=${DUT2_${int}1}[0] -| | -| | Configure inside and outside interfaces -| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${DUT1_${int}2}[0] -| | Configure deterministic mode for NAT44 -| | ... | ${dut1} | ${inside_net} | ${inside_mask} | ${nat_net} | ${nat_mask} - +| | Run Keyword If | ${dut2_status} +| | ... | VPP Add IP Neighbor +| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${tg_if2_ip4}| ${TG_pf2_mac}[0] +| | +| | Vpp Route Add +| | ... | ${dut1} | ${in_net} | ${in_mask} | gateway=${tg_if1_ip4} +| | ... | interface=${DUT1_${int}1}[0] +| | Run Keyword If | ${dut2_status} +| | ... | Vpp Route Add +| | ... | ${dut1} | ${dest_net} | ${dest_mask} | gateway=${dut2_if1_ip4} +| | ... | interface=${DUT1_${int}2}[0] +| | ... | ELSE | Vpp Route Add +| | ... | ${dut1} | ${dest_net} | ${dest_mask} | gateway=${tg_if2_ip4} +| | ... | interface=${DUT1_${int}2}[0] +| | Run Keyword If | ${dut2_status} +| | ... | Vpp Route Add +| | ... | ${dut2} | ${dest_net} | ${dest_mask} | gateway=${tg_if2_ip4} +| | ... | interface=${DUT2_${int}2}[0] +| | Run Keyword If | ${dut2_status} +| | ... | Vpp Route Add +| | ... | ${dut2} | ${out_net} | ${out_mask} | gateway=${dut1_if2_ip4} +| | ... | interface=${DUT2_${int}1}[0] |