CSIT-235: Switched Port Analyzer mirroring (SPAN) - IPv4

 - add library for SPAN setup
 - add telemetry traffic script and a keyword to run it
 - add "telemetry" folders for python and robot libraries
 - move IPFIX libraries to these new folders
 - add first SPAN test case, mirroring IPv4 ICMP packets

Change-Id: Ibca35f724c13662bf80dce2d7e2649d1a0b8676a
Signed-off-by: selias <samelias@cisco.com>

1 files changed, 0 insertions, 111 deletions

diff --git a/resources/libraries/robot/ipfix.robot b/resources/libraries/robot/ipfix.robot
deleted file mode 100644
index d8840a5261..0000000000
--- a/resources/libraries/robot/ipfix.robot
+++ /dev/null
@@ -1,111 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Traffic keywords"""
-
-*** Settings ***
-| Library | resources.libraries.python.TrafficScriptExecutor
-| Library | resources.libraries.python.InterfaceUtil
-| Resource | resources/libraries/robot/default.robot
-| Documentation | Traffic keywords
-
-*** Keywords ***
-| Send packets and verify IPFIX
-| | [Documentation] | Send simple TCP or UDP packets from source interface\
-| | ... | to destination interface. Listen for IPFIX flow report on source\
-| | ... | interface and verify received report against number of packets sent.
-| | ...
-| | ... | *Arguments:*
-| | ...
-| | ... | - tg_node - TG node. Type: dictionary
-| | ... | - dst_node - Destination node. Type: dictionary
-| | ... | - src_int - Source interface. Type: string
-| | ... | - dst_int - Destination interface. Type: string
-| | ... | - src_ip - Source IP address. Type: string
-| | ... | - dst_ip - Destination IP address. Type: string
-| | ... | - protocol - TCP or UDP (Optional, default is TCP). Type: string
-| | ... | - port - Source and destination ports to use
-| | ... | (Optional, default is port 20). Type: integer
-| | ... | - count - Number of packets to send
-| | ... | (Optional, default is one packet). Type: integer
-| | ... | - timeout - Timeout value in seconds (Optional, default is 10 sec).
-| | ... | Should be at least twice the configured IPFIX flow report interval.
-| | ... | Type: integer
-| | ...
-| | ... | *Return:*
-| | ...
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send packets and verify IPFIX \| ${nodes['TG']} | ${nodes['DUT1']}\
-| | ... | \| eth1 \| GigabitEthernet0/8/0 \| 16.0.0.1 \| 192.168.0.2 \| UDP \
-| | ... | \| ${20} \| ${5} \| ${10} \|
-| | ... |
-| | [Arguments] | ${tg_node} | ${dst_node} | ${src_int} | ${dst_int} |
-| | ... | ${src_ip} | ${dst_ip} | ${protocol}=tcp | ${port}=20 | ${count}=1
-| | ... | ${timeout}=${10}
-| | ${src_mac}= | Get Interface Mac | ${tg_node} | ${src_int}
-| | ${dst_mac}= | Get Interface Mac | ${dst_node} | ${dst_int}
-| | ${src_int_name}= | Get interface name | ${tg_node} | ${src_int}
-| | ${dst_int_name}= | Get interface name | ${dst_node} | ${dst_int}
-| | ${args}= | Traffic Script Gen Arg | ${dst_int_name} | ${src_int_name}
-| | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip}
-| | ${args}= | Set Variable
-| | ... | ${args} --protocol ${protocol} --port ${port} --count ${count}
-| | Run Traffic Script On Node | ipfix_check.py | ${tg_node} | ${args}
-| | ... | ${timeout}
-
-| Send session sweep and verify IPFIX
-| | [Documentation] | Send simple TCP or UDP packets from source interface\
-| | ... | to destination interface using a range of source addresses. Listen\
-| | ... | for IPFIX flow report on source interface and verify received report\
-| | ... | against number of packets sent from each source address.
-| | ...
-| | ... | *Arguments:*
-| | ...
-| | ... | - tg_node - TG node. Type: dictionary
-| | ... | - dst_node - Destination node. Type: dictionary
-| | ... | - src_int - Source interface. Type: string
-| | ... | - dst_int - Destination interface. Type: string
-| | ... | - src_ip - Source IP address. Type: string
-| | ... | - dst_ip - Destination IP address. Type: string
-| | ... | - ip_range - Number of sequential source addresses. Type:integer
-| | ... | - protocol - TCP or UDP (Optional, defaults to TCP). Type: string
-| | ... | - port - Source and destination ports to use (Optional). Type: integer
-| | ... | - count - Number of packets to send (Optional). Type: integer
-| | ... | - timeout - Timeout value in seconds (optional). Type:integer
-| | ...
-| | ... | *Return:*
-| | ...
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send packets and verify IPFIX \| ${nodes['TG']} | ${nodes['DUT1']}\
-| | ... | \| eth1 \| GigabitEthernet0/8/0 \| 16.0.0.1 \| 192.168.0.2 \| 20 \|
-| | ... | UDP \| ${20} \| ${5} \| ${10} \|
-| | ... |
-| | [Arguments] | ${tg_node} | ${dst_node} | ${src_int} | ${dst_int} |
-| | ... | ${src_ip} | ${dst_ip} | ${ip_range} | ${protocol}=tcp | ${port}=20
-| | ... | ${count}=${1} | ${timeout}=${10}
-| | ${src_mac}= | Get Interface Mac | ${tg_node} | ${src_int}
-| | ${dst_mac}= | Set Variable | ${dut1_to_tg_mac}
-| | ${src_int_name}= | Get interface name | ${tg_node} | ${src_int}
-| | ${dst_int_name}= | Get interface name | ${dst_node} | ${dst_int}
-| | ${args}= | Traffic Script Gen Arg | ${dst_int_name} | ${src_int_name}
-| | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip}
-| | ${args}= | Set Variable | ${args} --protocol ${protocol} --port ${port}
-| | ${args}= | Set Variable | ${args} --count ${count} --sessions ${ip_range}
-| | Run Traffic Script On Node | ipfix_sessions.py | ${tg_node} | ${args}
-| | ... | ${timeout}
\ No newline at end of file