Python3: resources and libraries

Change-Id: I1392c06b1d64f62b141d24c0d42a8e36913b15e2
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 163 insertions, 149 deletions

diff --git a/resources/libraries/robot/l2/l2_bridge_domain.robot b/resources/libraries/robot/l2/l2_bridge_domain.robot
index 6c16ed447f..a85cb70ab9 100644
--- a/resources/libraries/robot/l2/l2_bridge_domain.robot
+++ b/resources/libraries/robot/l2/l2_bridge_domain.robot
@@ -21,28 +21,29 @@
 *** Keywords ***
 | Show Bridge Domain Data On All DUTs
 | | [Documentation] | Show Bridge Domain data on all DUTs.
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
 | | | VPP Get Bridge Domain Data | ${nodes['${dut}']}
+| | END
 
 | Create bridge domain
 | | [Documentation]
 | | ... | Create bridge domain on given VPP node with defined learning status.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - ${dut_node} - DUT node. Type: dictionary
 | | ... | - ${bd_id} - Bridge domain ID. Type: integer
 | | ... | - ${learn} - Enable/disable MAC learn. Type: boolean, \
 | | ... | default value: ${TRUE}
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Create bridge domain \| ${nodes['DUT1']} \| 2 \|
 | | ... | \| Create bridge domain \| ${nodes['DUT1']} \| 5 \
 | | ... | \| learn=${FALSE} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${bd_id} | ${learn}=${TRUE}
-| | ...
+| |
 | | ${learn} = | Set Variable If | ${learn} == ${TRUE} | ${1} | ${0}
 | | Create L2 BD | ${dut_node} | ${bd_id} | learn=${learn}
 
@@ -50,20 +51,20 @@
 | | [Documentation]
 | | ... | Set given interface admin state to up and add this
 | | ... | interface to required L2 bridge domain on defined VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - ${dut_node} - DUT node. Type: dictionary
 | | ... | - ${dut_if} - DUT node interface name. Type: string
 | | ... | - ${bd_id} - Bridge domain ID. Type: integer
 | | ... | - ${shg} - Split-horizon group ID. Type: integer, default value: 0
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Add interface to bridge domain \| ${nodes['DUT2']} \
 | | ... | \| GigabitEthernet0/8/0 \| 3 \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${dut_if} | ${bd_id} | ${shg}=0
-| | ...
+| |
 | | Set Interface State | ${dut_node} | ${dut_if} | up
 | | Add Interface To L2 BD | ${dut_node} | ${dut_if} | ${bd_id} | ${shg}
 
@@ -72,41 +73,43 @@
 | | ... | Setup L2 bridge domain topology by adding two interfaces on DUT into
 | | ... | separate bridge domains that are created automatically starting with
 | | ... | index 1. Learning is enabled. Interfaces are brought up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut - DUT node. Type: string
 | | ... | - count - Number of bridge domains interfaces. Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 bridge domain on node \| DUT1 \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${dut} | ${count}=${1}
-| | ...
-| | :FOR | ${id} | IN RANGE | 1 | ${count} + 1
+| |
+| | FOR | ${id} | IN RANGE | 1 | ${count} + 1
 | | | ${dut_str}= | Convert To Lowercase | ${dut}
 | | | Add Interface To L2 BD
 | | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_1} | ${id}
 | | | Add Interface To L2 BD
 | | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_2} | ${id}
+| | END
 
 | Initialize L2 bridge domain
 | | [Documentation]
 | | ... | Setup L2 bridge domain topology by adding two interfaces on each DUT
 | | ... | into separate bridge domains that are created automatically starting
 | | ... | with index 1. Learning is enabled. Interfaces are brought up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - count - Number of bridge domains. Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 bridge domain \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${count}=${1}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 bridge domain on node | ${dut} | count=${count}
+| | END
 
 | Initialize L2 bridge domains with Vhost-User on node
 | | [Documentation]
@@ -114,24 +117,24 @@
 | | ... | defined VPP node. Add each Vhost-User interface into L2 bridge
 | | ... | domains with learning enabled with physical inteface or Vhost-User
 | | ... | interface of another VM.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut - DUT node. Type: string
 | | ... | - nf_chain - NF chain. Type: integer
 | | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
-| | ...
+| |
 | | ... | *Note:*
 | | ... | Socket paths for VM are defined in following format:
 | | ... | - /var/run/vpp/sock-\${VM_ID}-1
 | | ... | - /var/run/vpp/sock-\${VM_ID}-2
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 bridge domains with Vhost-User on node \| DUT1 \
 | | ... | \| 1 \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${dut} | ${nf_chain}=${1} | ${nf_nodes}=${1}
-| | ...
+| |
 | | ${bd_id1}= | Evaluate | ${nf_nodes} * (${nf_chain} - 1) + ${nf_chain}
 | | ${bd_id2}= | Evaluate | ${nf_nodes} * ${nf_chain} + ${nf_chain}
 | | ${dut_str}= | Convert To Lowercase | ${dut}
@@ -141,7 +144,7 @@
 | | Add interface to bridge domain
 | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_2}
 | | ... | ${bd_id2}
-| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes} + 1
+| | FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes} + 1
 | | | ${qemu_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node}
 | | | Configure vhost interfaces
 | | | ... | ${nodes['${dut}']}
@@ -153,6 +156,7 @@
 | | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${qemu_id}-if1} | ${bd_id1}
 | | | Add interface to bridge domain
 | | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${qemu_id}-if2} | ${bd_id2}
+| | END
 
 | Initialize L2 bridge domains with Vhost-User
 | | [Documentation]
@@ -160,20 +164,21 @@
 | | ... | on all defined VPP nodes. Add each Vhost-User interface into L2 bridge
 | | ... | domains with learning enabled with physical inteface or Vhost-User
 | | ... | interface of another VM.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - nf_chain - NF chain. Type: integer
 | | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 bridge domains with Vhost-User \| 1 \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 bridge domains with Vhost-User on node
 | | | ... | ${dut} | nf_chain=${nf_chain} | nf_nodes=${nf_nodes}
+| | END
 
 | Initialize L2 bridge domains for multiple chains with Vhost-User
 | | [Documentation]
@@ -182,24 +187,25 @@
 | | ... | Vhost-User interface into L2 bridge domains with learning enabled
 | | ... | with physical inteface or Vhost-User interface of another VM.
 | | ... | Put all interfaces in path up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - nf_chains - Number of chains of NFs. Type: integer
 | | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
 | | ... | - start - Id of first chain, allows to add chains during test.
 | | ... |     Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 bridge domains for multiple chains with Vhost-User \
 | | ... | \| 3 \| 1 \| 2 \|
-| | ...
+| |
 | | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${start}=${1}
-| | ...
+| |
 | | Set interfaces in path up
-| | :FOR | ${nf_chain} | IN RANGE | ${start} | ${nf_chains} + 1
+| | FOR | ${nf_chain} | IN RANGE | ${start} | ${nf_chains} + 1
 | | | Initialize L2 bridge domains with Vhost-User
 | | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes}
+| | END
 
 | Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology
 | | [Documentation]
@@ -208,7 +214,7 @@
 | | ... | up. IPv4 addresses with prefix /24 are configured on interfaces
 | | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as
 | | ... | interfaces.
-| | ...
+| |
 | | Set interfaces in path up
 | | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1
 | | ... | 24
@@ -232,26 +238,26 @@
 | | ... | domain on each DUT. All interfaces are brought up. IPv4 addresses
 | | ... | with prefix /32 are configured on interfaces between DUTs. VXLAN
 | | ... | sub-interfaces has same IPv4 address as interfaces.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - vxlan_count - VXLAN count. Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node \
 | | ... | \| circular topology \| ${1} \|
-| | ...
+| |
 | | [Arguments] | ${vxlan_count}=${1}
-| | ...
+| |
 | | Set interfaces in path up
-| | ...
+| |
 | | ${bd_id_start}= | Set Variable | ${1}
 | | ${vni_start} = | Set Variable | ${20}
-| | ...
+| |
 | | ${ip_step} = | Set Variable | ${2}
 | | ${dut1_ip_start}= | Set Variable | 172.16.0.1
 | | ${dut2_ip_start}= | Set Variable | 172.16.0.2
-| | ...
+| |
 | | Vpp create multiple VXLAN IPv4 tunnels | node=${dut1}
 | | ... | node_vxlan_if=${dut1_if2} | node_vlan_if=${dut1_if1}
 | | ... | op_node=${dut2} | op_node_if=${dut2_if1} | n_tunnels=${vxlan_count}
@@ -274,18 +280,18 @@
 | | ... | interfaces on each DUT. All interfaces are brought up.
 | | ... | IPv4 addresses with prefix /24 are configured on interfaces between
 | | ... | DUTs. VXLAN sub-interfaces has same IPv4 address as interfaces.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - bd_id1 - Bridge domain ID. Type: integer
 | | ... | - bd_id2 - Bridge domain ID. Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| L2 bridge domains with Vhost-User and VXLANoIPv4 initialized in a\
 | | ... | 3-node circular topology \| 1 \| 2 \|
-| | ...
+| |
 | | [Arguments] | ${bd_id1} | ${bd_id2}
-| | ...
+| |
 | | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1
 | | ... | 24
 | | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2
@@ -317,38 +323,38 @@
 | | ... | interfaces on the DUT. All interfaces are brought up.
 | | ... | IPv4 addresses with prefix /24 are configured on interfaces between
 | | ... | DUT and TG.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut1_address - Address of physical interface on DUT1. Type: string
 | | ... | - dut1_address_subnet - Subnet of the address of physical interface on
-| | ... |                         DUT1. Type: string
+| | ... | DUT1. Type: string
 | | ... | - dut2_address - Address of physical interface on DUT2. Type: string
 | | ... | - dut2_address_subnet - Subnet of the address of physical interface on
-| | ... |                         DUT2. Type: string
+| | ... | DUT2. Type: string
 | | ... | - dut1_gw - Address of the _gateway_ to which the traffic will be
-| | ... |             forwarded on DUT1. Type: string
+| | ... | forwarded on DUT1. Type: string
 | | ... | - dut2_gw - Address of the _gateway_ to which the traffic will be
-| | ... |             forwarded on DUT2. Type: string
+| | ... | forwarded on DUT2. Type: string
 | | ... | - dut1_vxlans - List of VXLAN params to be configured on DUT1.
-| | ... |                 Type: list of dicts, dict params vni, vtep
+| | ... | Type: list of dicts, dict params vni, vtep
 | | ... | - dut2_vxlans - List of VXLAN params to be configured on DUT2.
-| | ... |                 Type: list of dicts, dict params vni, vtep
-| | ... | - dut1_route_subnet - Subnet address to forward to  _gateway_ on DUT1.
-| | ... |                       Type: string
-| | ... | - dut1_route_mask - Subnet address mask to forward to  _gateway_
-| | ... |                     on DUT1. Type: string
-| | ... | - dut2_route_subnet - Subnet address to forward to  _gateway_ on DUT2.
-| | ... |                       Type: string
-| | ... | - dut2_route_mask - Subnet address mask to forward to  _gateway_
-| | ... |                     on DUT2. Type: string
-| | ...
+| | ... | Type: list of dicts, dict params vni, vtep
+| | ... | - dut1_route_subnet - Subnet address to forward to _gateway_ on DUT1.
+| | ... | Type: string
+| | ... | - dut1_route_mask - Subnet address mask to forward to _gateway_
+| | ... | on DUT1. Type: string
+| | ... | - dut2_route_subnet - Subnet address to forward to _gateway_ on DUT2.
+| | ... | Type: string
+| | ... | - dut2_route_mask - Subnet address mask to forward to _gateway_
+| | ... | on DUT2. Type: string
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | [Arguments] | ${dut1_address} | ${dut1_address_subnet} |
 | | ... | ${dut2_address} | ${dut2_address_subnet} | ${dut1_gw} | ${dut2_gw} |
 | | ... | ${dut1_vxlans} | ${dut2_vxlans} | ${dut1_route_subnet} |
 | | ... | ${dut1_route_mask} | ${dut2_route_subnet} | ${dut2_route_mask}
-| | ...
+| |
 | | Configure vhost interfaces | ${dut1}
 | | ... | /var/run/vpp/sock-1-${dut1_bd_id1}
 | | ... | /var/run/vpp/sock-1-${dut1_bd_id2}
@@ -359,14 +365,16 @@
 | | ${dut1_bd_id1}= | Set Variable | 1
 | | ${dut1_bd_id2}= | Set Variable | 2
 | | ${dut2_bd_id1}= | Set Variable | 1
-| | :FOR | ${vxlan} | IN | @{dut1_vxlans}
+| | FOR | ${vxlan} | IN | @{dut1_vxlans}
 | | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | ${vxlan.vni}
 | | | ... | ${dut1_address} | ${vxlan.vtep}
 | | | Add interface to bridge domain | ${dut1} | ${dut1s_vxlan} | ${dut1_bd_id1}
-| | :FOR | ${vxlan} | IN | @{dut2_vxlans}
+| | END
+| | FOR | ${vxlan} | IN | @{dut2_vxlans}
 | | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | ${vxlan.vni}
 | | | ... | ${dut2_address} | ${vxlan.vtep}
 | | | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${dut2_bd_id1}
+| | END
 | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${dut1_gw} | ${tg_if1_mac}
 | | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | ${dut2_gw} | ${tg_if2_mac}
 | | Vpp Route Add | ${dut1} | ${dut1_route_subnet} | ${dut1_route_mask}
@@ -385,31 +393,31 @@
 | | ... | topology create VLAN sub-interfaces between DUTs. In case of 2-node
 | | ... | topology create VLAN sub-interface on dut1-if2 interface. All
 | | ... | interfaces are brought up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - bd_id1 - Bridge domain ID. Type: integer
 | | ... | - bd_id2 - Bridge domain ID. Type: integer
 | | ... | - subid - ID of the sub-interface to be created. Type: string
 | | ... | - tag_rewrite - Method of tag rewrite. Type: string
-| | ...
+| |
 | | ... | _NOTE:_ This KW uses following test case variables:
 | | ... | - dut1 - DUT1 node.
 | | ... | - dut2 - DUT2 node.
 | | ... | - dut1_if2 - DUT1 interface towards DUT2.
 | | ... | - dut2_if1 - DUT2 interface towards DUT1.
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 bridge domains with VLAN dot1q sub-interfaces
 | | ... | in a 3-node circular topology \| 1 \| 2 \| 10 \| pop-1 \|
-| | ...
+| |
 | | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
-| | ...
+| |
 | | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
 | | ... | Variable Should Exist | ${dut2}
-| | ...
+| |
 | | Set interfaces in path up
-| | ...
+| |
 | | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | Initialize VLAN dot1q sub-interfaces in circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
@@ -420,7 +428,7 @@
 | | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite}
 | | ... | ELSE | Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite}
-| | ...
+| |
 | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1}
 | | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id1}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
@@ -437,25 +445,25 @@
 | | ... | with physical inteface. In case of 3-node topology create VLAN
 | | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN
 | | ... | sub-interface on dut1-if2 interface. All interfaces are brought up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - bd_id1 - Bridge domain ID. Type: integer
 | | ... | - bd_id2 - Bridge domain ID. Type: integer
 | | ... | - subid - ID of the sub-interface to be created. Type: string
 | | ... | - tag_rewrite - Method of tag rewrite. Type: string
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| L2 bridge domains with Vhost-User and VLAN initialized in circular\
 | | ... | topology \| 1 \| 2 \| 10 \| pop-1 \|
-| | ...
+| |
 | | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
-| | ...
+| |
 | | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
 | | ... | Variable Should Exist | ${dut2}
-| | ...
+| |
 | | Set interfaces in path up
-| | ...
+| |
 | | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | Initialize VLAN dot1q sub-interfaces in circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
@@ -466,7 +474,7 @@
 | | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite}
 | | ... | ELSE | Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite}
-| | ...
+| |
 | | Configure vhost interfaces | ${dut1}
 | | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2}
 | | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1}
@@ -496,7 +504,7 @@
 | | ... | interface towards TG and other Vhost-User interface into L2 bridge
 | | ... | domains with learning enabled with VLAN sub-interface. All interfaces
 | | ... | are brought up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - bd_id1 - Bridge domain ID. Type: integer
 | | ... | - bd_id2 - Bridge domain ID. Type: integer
@@ -504,16 +512,16 @@
 | | ... | - tag_rewrite - Method of tag rewrite. Type: string
 | | ... | - bond_mode - Link bonding mode. Type: string
 | | ... | - lb_mode - Load balance mode. Type: string
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 bridge domains with Vhost-User and VLAN with VPP\
 | | ... | link bonding in a 3-node circular topology \| 1 \| 2 \
 | | ... | \| 10 \| pop-1 \| xor \| l34 \|
-| | ...
+| |
 | | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
 | | ... | ${bond_mode} | ${lb_mode}
-| | ...
+| |
 | | Set interfaces in path up
 | | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode}
 | | ... | ${lb_mode}
@@ -570,26 +578,26 @@
 | | ... | Create pairs of Memif interfaces on DUT node. Put each Memif interface
 | | ... | to separate L2 bridge domain with one physical or memif interface
 | | ... | to create a chain accross DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut - DUT node. Type: dictionary
 | | ... | - nf_chain - NF chain. Type: integer
 | | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
 | | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
 | | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
-| | ...
+| |
 | | ... | *Note:*
 | | ... | Socket paths for Memif are defined in following format:
 | | ... | - /tmp/memif-\${dut}_CNF\${nf_id}-\${sid}
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 Bridge Domain with memif pairs on DUT node \
 | | ... | \| ${dut} \| 1 \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${dut} | ${nf_chain}=${1} | ${nf_nodes}=${1}
 | | ... | ${auto_scale}=${True}
-| | ...
+| |
 | | ${rxq}= | Run Keyword If | ${auto_scale} == ${True}
 | | ... | Set Variable | ${rxq_count_int}
 | | ... | ELSE | Set Variable | ${1}
@@ -602,7 +610,7 @@
 | | Add interface to bridge domain
 | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_2}
 | | ... | ${bd_id2}
-| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes}+1
+| | FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes}+1
 | | | ${nf_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node}
 | | | ${sock1}= | Set Variable | memif-${dut}_CNF
 | | | ${sock2}= | Set Variable | memif-${dut}_CNF
@@ -615,29 +623,31 @@
 | | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id}-if1} | ${bd_id1}
 | | | Add interface to bridge domain
 | | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id}-if2} | ${bd_id2}
+| | END
 
 | Initialize L2 Bridge Domain with memif pairs
 | | [Documentation]
 | | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each
 | | ... | Memif interface to separate L2 bridge domain with one physical or
 | | ... | virtual interface to create a chain accross DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - nf_chain - NF chain. Type: integer
 | | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
 | | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
 | | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 Bridge Domain with memif pairs \| 1 \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 Bridge Domain with memif pairs on DUT node | ${dut}
 | | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes}
 | | | ... | auto_scale=${auto_scale}
+| | END
 
 | Initialize L2 Bridge Domain for multiple chains with memif pairs
 | | [Documentation]
@@ -645,23 +655,24 @@
 | | ... | with defined number of NF nodes on all defined VPP nodes. Add each
 | | ... | Memif interface into L2 bridge domains with learning enabled
 | | ... | with physical inteface or Memif interface of another NF.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - nf_chains - Number of chains of NFs. Type: integer
 | | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer
 | | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
 | | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 Bridge Domain for multiple chains with memif pairs \
 | | ... | \| 1 \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True}
-| | ...
-| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1
+| |
+| | FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1
 | | | Initialize L2 Bridge Domain with memif pairs | nf_chain=${nf_chain}
 | | | ... | nf_nodes=${nf_nodes} | auto_scale=${auto_scale}
+| | END
 | | Set interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
 | | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
@@ -671,26 +682,26 @@
 | | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each
 | | ... | Memif interface to separate L2 bridge domain with one physical or
 | | ... | virtual interface to create a service pipeline on DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - nf_chain - NF pipe. Type: integer
 | | ... | - nf_nodes - Number of NFs nodes per pipeline. Type: integer
 | | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
 | | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 Bridge Domain for pipeline with memif pairs \
 | | ... | \| 1 \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True}
-| | ...
+| |
 | | ${rxq}= | Run Keyword If | ${auto_scale} == ${True}
 | | ... | Set Variable | ${rxq_count_int}
 | | ... | ELSE | Set Variable | ${1}
 | | ${bd_id1}= | Evaluate | ${nf_nodes} * (${nf_chain} - 1) + ${nf_chain}
 | | ${bd_id2}= | Evaluate | ${nf_nodes} * ${nf_chain} + ${nf_chain}
-| | :FOR | ${dut} | IN | @{duts}
+| | FOR | ${dut} | IN | @{duts}
 | | | ${dut_str}= | Convert To Lowercase | ${dut}
 | | | Add interface to bridge domain
 | | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_1}
@@ -714,6 +725,7 @@
 | | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id_frst}-if1} | ${bd_id1}
 | | | Add interface to bridge domain
 | | | ... | ${nodes['${dut}']} | ${${dut}-memif-${nf_id_last}-if2} | ${bd_id2}
+| | END
 
 | Initialize L2 Bridge Domain for multiple pipelines with memif pairs
 | | [Documentation]
@@ -721,24 +733,25 @@
 | | ... | with defined number of NF nodes on all defined VPP nodes. Add each
 | | ... | Memif interface into L2 bridge domains with learning enabled
 | | ... | with physical inteface or Memif interface of another NF.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - nf_chains - Number of pipelines of NFs. Type: integer
 | | ... | - nf_nodes - Number of NFs nodes per pipeline. Type: integer
 | | ... | - auto_scale - Whether to use same amount of RXQs for memif interface
 | | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 Bridge Domain for multiple pipelines with memif \
 | | ... | pairs \| 1 \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True}
-| | ...
-| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1
+| |
+| | FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1
 | | | Initialize L2 Bridge Domain for pipeline with memif pairs
 | | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes}
 | | | ... | auto_scale=${auto_scale}
+| | END
 | | Set interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
 | | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
@@ -751,25 +764,25 @@
 | | ... | 3-node topology create VLAN sub-interfaces between DUTs. In case of
 | | ... | 2-node topology create VLAN sub-interface on dut1-if2 interface. All
 | | ... | interfaces are brought up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - bd_id1 - Bridge domain ID. Type: integer
 | | ... | - bd_id2 - Bridge domain ID. Type: integer
 | | ... | - subid - ID of the sub-interface to be created. Type: string
 | | ... | - tag_rewrite - Method of tag rewrite. Type: string
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 Bridge Domain with memif pairs and VLAN in circular\
 | | ... | topology \| 1 \| 2 \| 10 \| pop-1 \|
-| | ...
+| |
 | | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite}
-| | ...
+| |
 | | ${dut2_status} | ${value}= | Run Keyword And Ignore Error
 | | ... | Variable Should Exist | ${dut2}
-| | ...
+| |
 | | Set interfaces in path up
-| | ...
+| |
 | | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | Initialize VLAN dot1q sub-interfaces in circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
@@ -780,7 +793,7 @@
 | | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite}
 | | ... | ELSE | Configure L2 tag rewrite method on interfaces
 | | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite}
-| | ...
+| |
 | | ${number}= | Set Variable | ${1}
 | | ${sock1}= | Set Variable | memif-DUT1_CNF
 | | ${sock2}= | Set Variable | memif-DUT1_CNF
@@ -816,7 +829,7 @@
 | | ... | ${bd_id2}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2}
-| | ...
+| |
 | | Show Memif on all DUTs | ${nodes}
 | | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
 
@@ -824,24 +837,24 @@
 | | [Documentation]
 | | ... | Create single Memif interface on all defined VPP nodes. Put Memif
 | | ... | interface to separate L2 bridge domain with one physical interface.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - number - Memif ID. Type: integer
-| | ...
+| |
 | | ... | *Note:*
 | | ... | Socket paths for Memif are defined in following format:
 | | ... | - /tmp/memif-DUT1_CNF\${number}-\${sid}
-| | ...
+| |
 | | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads
 | | ... | and rxqueues to all DUTs
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 Bridge Domain for single memif \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${number}=${1}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
 | | | ${sock}= | Set Variable | memif-${dut}_CNF
 | | | ${sid}= | Evaluate | (${number} * ${2}) - ${1}
 | | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock}
@@ -851,6 +864,7 @@
 | | | ... | ${number}
 | | | Add interface to bridge domain | ${nodes['${dut}']}
 | | | ... | ${${dut}-memif-${number}-if1} | ${number}
+| | END
 | | Set single interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
 
@@ -860,7 +874,7 @@
 | | ... | domain that is created automatically with index 1. Learning is
 | | ... | enabled. Interfaces are brought up. Apply required MACIP ACL rules to
 | | ... | DUT1 interfaces.
-| | ...
+| |
 | | Set interfaces in path up
 | | VPP Add L2 Bridge Domain | ${dut1} | ${1} | ${dut1_if1} | ${dut1_if2}
 | | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2}
@@ -872,7 +886,7 @@
 | | ... | domain that is created automatically with index 1. Learning is
 | | ... | enabled. Interfaces are brought up. Apply required ACL rules to DUT1
 | | ... | interfaces.
-| | ...
+| |
 | | Set interfaces in path up
 | | VPP Add L2 Bridge Domain | ${dut1} | ${1} | ${dut1_if1} | ${dut1_if2}
 | | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2}