Python3: resources and libraries

Change-Id: I1392c06b1d64f62b141d24c0d42a8e36913b15e2
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 66 insertions, 59 deletions

diff --git a/resources/libraries/robot/l2/l2_xconnect.robot b/resources/libraries/robot/l2/l2_xconnect.robot
index 42fe837676..a0c1c24a5d 100644
--- a/resources/libraries/robot/l2/l2_xconnect.robot
+++ b/resources/libraries/robot/l2/l2_xconnect.robot
@@ -27,45 +27,47 @@
 | | [Documentation]
 | | ... | Setup L2 cross connect topology by connecting RX/TX of two interfaces
 | | ... | on each DUT. Interfaces are brought up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut - DUT node. Type: string
 | | ... | - count - Number of interfaces pairs to connect. Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 cross connect on node \| DUT1 \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${dut} | ${count}=${1}
-| | ...
-| | :FOR | ${id} | IN RANGE | 1 | ${count} + 1
+| |
+| | FOR | ${id} | IN RANGE | 1 | ${count} + 1
 | | | ${dut_str}= | Convert To Lowercase | ${dut}
 | | | VPP Setup Bidirectional Cross Connect | ${nodes['${dut}']}
 | | | ... | ${${dut_str}_${prev_layer}_${id}_1}
 | | | ... | ${${dut_str}_${prev_layer}_${id}_2}
+| | END
 
 | Initialize L2 cross connect
 | | [Documentation]
 | | ... | Setup L2 cross connect topology by connecting RX/TX of two interfaces
 | | ... | on each DUT. Interfaces are brought up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - count - Number of interfaces pairs to connect. Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 cross connect \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${count}=${1}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 cross connect on node | ${dut} | count=${count}
+| | END
 
 | Initialize L2 xconnect in 2-node circular topology
 | | [Documentation]
 | | ... | Setup L2 xconnect topology by cross connecting two interfaces on
 | | ... | each DUT. Interfaces are brought up.
-| | ...
+| |
 | | Set interfaces in path up
 | | VPP Setup Bidirectional Cross Connect | ${dut1} | ${dut1_if1} | ${dut1_if2}
 
@@ -85,7 +87,7 @@
 | | ... | up. IPv4 addresses with prefix /24 are configured on interfaces
 | | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as
 | | ... | interfaces.
-| | ...
+| |
 | | Set interfaces in path up
 | | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24
 | | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24
@@ -103,23 +105,23 @@
 | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on
 | | ... | defined VPP node. Add each Vhost-User interface into L2 cross-connect
 | | ... | with with physical inteface or Vhost-User interface of another VM.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut - DUT node. Type: string
 | | ... | - nf_nodes - VM count. Type: integer
-| | ...
+| |
 | | ... | *Note:*
 | | ... | Socket paths for VM are defined in following format:
 | | ... | - /tmp/sock-\${VM_ID}-1
 | | ... | - /tmp/sock-\${VM_ID}-2
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 xconnect with Vhost-User on node \| DUT1 \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${dut} | ${nf_nodes}=${1}
-| | ...
-| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1
+| |
+| | FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1
 | | | ${sock1}= | Set Variable | /var/run/vpp/sock-${number}-1
 | | | ${sock2}= | Set Variable | /var/run/vpp/sock-${number}-2
 | | | ${prev_index}= | Evaluate | ${number}-1
@@ -132,43 +134,45 @@
 | | | ... | ${${dut}-vhost-${number}-if1}
 | | | Run Keyword If | ${number}==${nf_nodes} | Configure L2XC
 | | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${number}-if2} | ${${dut}_if2}
+| | END
 
 | Initialize L2 xconnect with Vhost-User
 | | [Documentation]
 | | ... | Create pairs of Vhost-User interfaces for defined number of VMs on
 | | ... | all VPP nodes. Add each Vhost-User interface into L2 cross-connect
 | | ... | with with physical inteface or Vhost-User interface of another VM.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - nf_nodes - VM count. Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 xconnect with Vhost-User \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${nf_nodes}=${1}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 xconnect with Vhost-User on node | ${dut}
 | | | ... | nf_nodes=${nf_nodes}
+| | END
 
 | Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology
 | | [Documentation]
 | | ... | Create two Vhost-User interfaces on all defined VPP nodes. Cross
 | | ... | connect each Vhost interface with one physical interface.
 | | ... | Setup VLAN between DUTs. All interfaces are brought up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - subid - ID of the sub-interface to be created. Type: string
 | | ... | - tag_rewrite - Method of tag rewrite. Type: string
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| L2 xconnect with Vhost-User and VLAN initialized in a 3-node\
 | | ... | circular topology \| 10 \| pop-1 \|
-| | ...
+| |
 | | [Arguments] | ${subid} | ${tag_rewrite}
-| | ...
+| |
 | | Set interfaces in path up
 | | Initialize VLAN dot1q sub-interfaces in circular topology
 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
@@ -192,20 +196,20 @@
 | | ... | VLAN on BondEthernet interfaces between DUTs. Cross connect one Vhost
 | | ... | interface with physical interface towards TG and other Vhost interface
 | | ... | with VLAN sub-interface. All interfaces are brought up.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - subid - ID of the sub-interface to be created. Type: string
 | | ... | - tag_rewrite - Method of tag rewrite. Type: string
 | | ... | - bond_mode - Link bonding mode. Type: string
 | | ... | - lb_mode - Load balance mode. Type: string
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 xconnect with Vhost-User and VLAN with VPP link\
 | | ... | bonding in 3-node circular topology \| 10 \| pop-1 \| xor \| l34 \|
-| | ...
+| |
 | | [Arguments] | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
-| | ...
+| |
 | | Set interfaces in path up
 | | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode}
 | | ... | ${lb_mode}
@@ -258,26 +262,26 @@
 | | ... | Create pairs of Memif interfaces on DUT node. Cross connect each Memif
 | | ... | interface with one physical interface or virtual interface to create
 | | ... | a chain accross DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut - DUT node. Type: dictionary
 | | ... | - count - Number of memif pairs (containers). Type: integer
-| | ...
+| |
 | | ... | *Note:*
 | | ... | Socket paths for Memif are defined in following format:
 | | ... | - /tmp/memif-\${dut}_CNF\${number}-\${sid}
-| | ...
+| |
 | | ... | KW uses test variable \${rxq_count_int} set by KW Add worker threads
 | | ... | and rxqueues to all DUTs
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 xconnect with memif pairs on DUT node \| ${dut} \
 | | ... | \| ${1} \|
-| | ...
+| |
 | | [Arguments] | ${dut} | ${count}
-| | ...
-| | :FOR | ${number} | IN RANGE | 1 | ${count}+1
+| |
+| | FOR | ${number} | IN RANGE | 1 | ${count}+1
 | | | ${sock1}= | Set Variable | memif-${dut}_CNF
 | | | ${sock2}= | Set Variable | memif-${dut}_CNF
 | | | ${prev_index}= | Evaluate | ${number}-1
@@ -290,24 +294,26 @@
 | | | ... | ${${dut}-memif-${number}-if1}
 | | | Run Keyword If | ${number}==${count} | Configure L2XC
 | | | ... | ${nodes['${dut}']} | ${${dut}-memif-${number}-if2} | ${${dut}_if2}
+| | END
 
 | Initialize L2 xconnect with memif pairs
 | | [Documentation]
 | | ... | Create pairs of Memif interfaces on all defined VPP nodes. Cross
 | | ... | connect each Memif interface with one physical interface or virtual
 | | ... | interface to create a chain accross DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - count - Number of memif pairs (containers). Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 xconnect with memif pairs \| ${1} \|
-| | ...
+| |
 | | [Arguments] | ${count}=${1}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 xconnect with memif pairs on DUT node | ${dut} | ${count}
+| | END
 | | Set interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
 | | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif
@@ -316,24 +322,24 @@
 | | [Documentation]
 | | ... | Create single Memif interface on all defined VPP nodes. Cross
 | | ... | connect Memif interface with one physical interface.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - number - Memif ID. Type: integer
-| | ...
+| |
 | | ... | *Note:*
 | | ... | Socket paths for Memif are defined in following format:
 | | ... | - /tmp/memif-DUT1_CNF\${number}-\${sid}
-| | ...
+| |
 | | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads
 | | ... | and rxqueues to all DUTs
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Initialize L2 xconnect for single memif \| 1 \|
-| | ...
+| |
 | | [Arguments] | ${number}=${1}
-| | ...
-| | :FOR | ${dut} | IN | @{duts}
+| |
+| | FOR | ${dut} | IN | @{duts}
 | | | ${sock}= | Set Variable | memif-${dut}_CNF
 | | | ${sid}= | Evaluate | (${number} * ${2}) - ${1}
 | | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock}
@@ -341,6 +347,7 @@
 | | | ... | rxq=${rxq_count_int} | txq=${rxq_count_int}
 | | | Configure L2XC | ${nodes['${dut}']} | ${${dut}_if1}
 | | | ... | ${${dut}-memif-${number}-if1}
+| | END
 | | Set single interfaces in path up
 | | Show Memif on all DUTs | ${nodes}
 | | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif