Python3: resources and libraries

Change-Id: I1392c06b1d64f62b141d24c0d42a8e36913b15e2
Signed-off-by: Jan Gelety <jgelety@cisco.com>

6 files changed, 186 insertions, 181 deletions

diff --git a/resources/libraries/robot/overlay/lisp.robot b/resources/libraries/robot/overlay/lisp.robot
index 826cc3a7b1..f9da0be399 100644
--- a/resources/libraries/robot/overlay/lisp.robot
+++ b/resources/libraries/robot/overlay/lisp.robot
@@ -23,10 +23,10 @@
 *** Keywords ***
 | Configure topology for IPv4 LISP testing
 | | [Documentation] | Setup topology for IPv4 LISP testing.
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Configure topology for IPv4 LISP testing \|
-| | ...
+| |
 | | Set interfaces in path up
 | | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip4} | ${ip4_plen}
@@ -41,10 +41,10 @@
 
 | Configure topology for IPv6 LISP testing
 | | [Documentation] | Setup topology fo IPv6 LISP testing.
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Configure topology for IPv6 LISP testing \|
-| | ...
+| |
 | | Set interfaces in path up
 | | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip6} | ${ip6_plen}
@@ -59,7 +59,7 @@
 
 | Configure LISP in 2-node circular topology
 | | [Documentation] | Configure LISP topology in 2-node circular topology.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut1 - DUT1 node. Type: dictionary
 | | ... | - dut1_if - DUT1 node interface. Type: string
@@ -70,27 +70,27 @@
 | | ... | - is_gpe - To enable GPE. Other than zero to enable Type: integer
 | | ... | - vni_table - vni table Eid Table Mapping Type: integer
 | | ... | - vrf_table - vrf table Eid Table Mapping Type: integer
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Configure LISP in 2-node circular topology \
 | | ... | \| ${dut1} \| ${interface_name} \
 | | ... | \| None \| ${locator_set} \| ${dut1_eid} \
 | | ... | \| ${dut1_static_adjacency} \|
-| | ...
+| |
 | | [Arguments]
 | | ... | ${dut1} | ${dut1_if} | ${dut1_int_index}
 | | ... | ${locator_set} | ${dut1_eid}
 | | ... | ${dut1_static_adjacency}
 | | ... | ${is_gpe}=0
 | | ... | ${vni_table}=0 | ${vrf_table}=0
-| | ...
-# DUT1 settings:
+| |
+| | # DUT1 settings:
 | | ${dut1_int_index}= | Run Keyword If | ${dut1_int_index} is None
-| |  ... | Get Interface Sw Index | ${dut1} | ${dut1_if}
-| |  ... | ELSE | Set Variable | ${dut1_int_index}
+| | ... | Get Interface Sw Index | ${dut1} | ${dut1_if}
+| | ... | ELSE | Set Variable | ${dut1_int_index}
 | | Enable Lisp | ${dut1}
 | | Run keyword if | ${is_gpe} != 0
 | | ... | Enable Lisp GPE | ${dut1}
@@ -118,10 +118,10 @@
 
 | Configure topology for IPv6 LISPoIP4 testing
 | | [Documentation] | Setup topology fo IPv6 LISPoIPV4 testing.
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Configure topology for IPv6 LISPoIP4 testing \|
-| | ...
+| |
 | | Set interfaces in path up
 | | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip6} | ${ip6_plen}
@@ -136,10 +136,10 @@
 
 | Configure topology for IPv4 LISPoIP6 testing
 | | [Documentation] | Setup topology fo IPv4 LISPoIPV6 testing.
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Configure topology for IPv4 LISPoIP6 testing \|
-| | ...
+| |
 | | Set interfaces in path up
 | | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if1} | ${dut_if1_ip4} | ${ip4_plen}
diff --git a/resources/libraries/robot/overlay/lisp_api.robot b/resources/libraries/robot/overlay/lisp_api.robot
index b858ef48a7..21f17d51f1 100644
--- a/resources/libraries/robot/overlay/lisp_api.robot
+++ b/resources/libraries/robot/overlay/lisp_api.robot
@@ -24,24 +24,24 @@
 | Generate LISP locator_set data
 | | [Documentation] | Generate lisp locator_set data for test
 | | ... | the lisp locator_set and locator API.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
 | | ... | - locator_set_number - Number how many locator_set data
 | | ... | will be generated. Type: integer
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | _NOTE:_ This KW sets following test case variables:
 | | ... | - locator_set_values - New generated locator_set data.
 | | ... | - locator_set_values_vat - New generated locator_set data expected\
 | | ... | from VAT.
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Given Generate LISP locator_set data \| ${nodes['DUT1']} \
 | | ... | \| ${locator_set_number} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${locator_set_number}
 | | ${locator_set_values} | ${locator_set_values_vat}=
 | | ... | Generate Unique Lisp Locator Set Data
@@ -51,40 +51,40 @@
 
 | Configure LISP locator_set data
 | | [Documentation] | Set the lisp locator_set and locator on the VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | _NOTE:_ This KW requires following test case variables:
 | | ... | - locator_set_values - Generated locator_set data from
 | | ... | KW locator_set data is prepared, which will be set on the VPP node.
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| When Configure LISP locator_set data \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
 | | Vpp Set Lisp Locator Set | ${dut_node} | ${locator_set_values}
 
 | LISP locator_set shpuld be configured correctly
 | | [Documentation] | Test if the locator_set is set correctly on the VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | _NOTE:_ This KW requires following test case variables:
 | | ... | - locator_set_values_vat - Generated locator_set data from
 | | ... | KW locator_set data is prepared, which are expected from VPP via VAT.
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Then LISP locator_set should be configured correctly \
 | | ... | \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
 | | ${show_locator_set}= | Vpp Show Lisp Locator Set | ${dut_node} | local
 | | Lisp Locator S Should Be Equal
@@ -92,36 +92,36 @@
 
 | Delete all LISP locator_set from VPP
 | | [Documentation] | Delete all lisp locator_set on the VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | _NOTE:_ This KW requires following test case variables:
 | | ... | - locator_set_values - Generated locator_set data from
 | | ... | KW locator_set data is prepared, which was set on the VPP node.
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| When Delete all LISP locator_set from VPP \
 | | ... | \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
 | | Vpp Unset Lisp Locator Set | ${dut_node} | ${locator_set_values}
 
 | LISP locator_set should be unset
 | | [Documentation] | Test if all locator_set are unset from VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Then LISP locator_set should be unset \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
 | | ${show_locator_set}= | Vpp Show Lisp Locator Set | ${dut_node} | ${EMPTY}
 | | Lisp Is Empty | ${show_locator_set}
@@ -129,24 +129,24 @@
 | Lisp locator_set data use for test reset locator_set are prepared
 | | [Documentation] | Generate lisp special type of locator_set data.
 | | ... | This data will be use for test reset locator_set.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
 | | ... | - locator_set_number - Number how many locator_set data
 | | ... | it will generate. Type: integer
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | _NOTE:_ This KW sets following test case variables:
 | | ... | - locator_set_values - New generate locator_set data.
 | | ... | - locator_set_values_vat - New generated locator_set data expected\
 | | ... | from VAT.
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Given Lisp locator_set data use for test reset locator_set \
 | | ... | are prepared \| ${nodes['DUT1']} \| ${locator_set_number} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${locator_set_number}
 | | ${locator_set_values} | ${locator_set_values_vat}=
 | | ... | Generate Duplicate Lisp Locator Set Data
@@ -156,244 +156,244 @@
 
 | Configure LISP eid address
 | | [Documentation] | Set the lisp eid address on the VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
 | | ... | - set_eid - Test eid data. Type: list
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| When Configure LISP eid address \| ${nodes['DUT1']} \
 | | ... | \| ${eid_table} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${set_eid}
 | | Vpp Set Lisp Eid Table | ${dut_node} | ${set_eid}
 
 | LISP eid address should be set correctly to eid table
 | | [Documentation] | Test if the locator_set is set correctly on the VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
 | | ... | - set_eid - Example eid data, which was set to the VPP node.
 | | ... | Type: list
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | _NOTE:_ This KW requires following test case variables:
 | | ... | - set_eid - Generated eid data, which will be set to the VPP node.
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Then LISP eid address should be set correctly to eid table \
 | | ... | \| ${nodes['DUT1']} \| ${eid_table} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${set_eid}
 | | ${show_eid}= | Vpp Show Lisp Eid Table | ${dut_node}
 | | Lisp Should Be Equal | ${set_eid} | ${show_eid}
 
 | Delete all LISP eid address from VPP
 | | [Documentation] | Delete all lisp eid address from the VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
 | | ... | - set_eid - Eid data which will be removed from the VPP node.
 | | ... | Type: list
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| When Delete all LISP eid address from VPP \
 | | ... | \| ${nodes['DUT1']} \| ${eid_table} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${set_eid}
 | | Vpp Unset Lisp Eid Table | ${dut_node} | ${set_eid}
 
 | LISP eid table should be empty
 | | [Documentation] | Test if the eid table is empty.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Then LISP eid table should be empty \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
 | | ${show_eid}= | Vpp Show Lisp Eid Table | ${dut_node}
 | | Lisp Is Empty | ${show_eid}
 
 | Configure LISP map resolver address
 | | [Documentation] | Set the lisp map resolver address in the VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
 | | ... | - set_map_resolver - Map resolver data, which will be set on
 | | ... | the VPP node. Type: list
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| When Configure LISP map resolver address \| ${nodes['DUT1']} \
 | | ... | \| ${map_resolver} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${set_map_resolver}
 | | Vpp Set Lisp Map Resolver | ${dut_node} | ${set_map_resolver}
 
 | LISP map resolver address should be configured correctly
 | | [Documentation] | Test if the map resolver address is set correctly
 | | ... | on the VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
 | | ... | - set_map_resolver - Map resolver data, which was set on
 | | ... | the VPP node. Type: list
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Then LISP map resolver address should be configured correctly \
 | | ... | \| ${nodes['DUT1']} \| ${map_resolver} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${set_map_resolver}
 | | ${show_map_resolver}= | Vpp Show Lisp Map Resolver | ${dut_node}
 | | Lisp Should Be Equal | ${set_map_resolver} | ${show_map_resolver}
 
 | Delete all LISP map resolver address from VPP
 | | [Documentation] | Delete all lisp map resolver address on the VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
 | | ... | - map_resolver - Map resolver data, which will be remove from
 | | ... | the VPP. Type: list
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| When Delete all LISP map resolver address from VPP \
 | | ... | \| ${nodes['DUT1']} \| ${map_resolver} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${set_map_resolver}
 | | Vpp Unset Lisp Map Resolver | ${dut_node} | ${set_map_resolver}
 
 | LISP map resolver address should be empty
 | | [Documentation] | Test if the map resolver are empty.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Then LISP map resolver address should be empty \
 | | ... | \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
 | | ${show_map_resolver}= | Vpp Show Lisp Map Resolver | ${dut_node}
 | | Lisp Is Empty | ${show_map_resolver}
 
 | Enable LISP
 | | [Documentation] | Enable LISP on VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Enable LISP \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
 | | Vpp Lisp Enable Disable | ${dut_node} | enable
 
 | LISP should be enabled
 | | [Documentation] | Check if the lisp is enabled.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
 | | ... | - lisp_status_data - Lisp status data, which was set on
 | | ... | the VPP node. Type: list
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| LISP should be enabled \| ${nodes['DUT1']} \
 | | ... | \| ${lisp_status_data} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${lisp_status_data}
 | | ${show_lisp_stat}= | Vpp Show Lisp State | ${dut_node}
 | | Lisp Should Be Equal | ${show_lisp_stat} | ${lisp_status_data[1]}
 
 | Disable LISP
 | | [Documentation] | Disable LISP on VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Disable LISP \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
 | | Vpp Lisp Enable Disable | ${dut_node} | disable
 
 | LISP Should be disabled
 | | [Documentation] | LISP Should be disabled.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
 | | ... | - lisp_status_data - Lisp status data, which was set on
 | | ... | the VPP node. Type: list
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| LISP Should be disabled \| ${nodes['DUT1']} \
 | | ... | \| ${lisp_status_data} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${lisp_status_data}
 | | ${show_lisp_stat}= | Vpp Show Lisp State | ${dut_node}
 | | Lisp Should Be Equal | ${show_lisp_stat} | ${lisp_status_data[0]}
 
 | Enable Lisp Gpe
 | | [Documentation] | Enable Lisp Gpe on VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Enable Lisp Gpe \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
 | | Vpp Lisp Gpe Enable Disable | ${dut_node} | enable
 
 | Disable Lisp Gpe
 | | [Documentation] | Disable Lisp Gpe on VPP node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Disable Lisp Gpe \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
 | | Vpp Lisp Gpe Enable Disable | ${dut_node} | disable
diff --git a/resources/libraries/robot/overlay/lisp_static_adjacency.robot b/resources/libraries/robot/overlay/lisp_static_adjacency.robot
index 55dab37d10..a68bb7e747 100644
--- a/resources/libraries/robot/overlay/lisp_static_adjacency.robot
+++ b/resources/libraries/robot/overlay/lisp_static_adjacency.robot
@@ -18,15 +18,15 @@
 | Library  | resources.libraries.python.LispSetup.LispLocalEid
 | Library  | resources.libraries.python.LispSetup.LispLocatorSet
 | Library  | resources.libraries.python.LispSetup.LispRemoteMapping
-| ...
+|
 | Resource | resources/libraries/robot/overlay/lisp_api.robot
-| ...
+|
 | Documentation | Lisp static adjacency suite keywords
 
 *** Keywords ***
 | Configure LISP topology in 3-node circular topology
 | | [Documentation] | Set up Lisp static adjacency topology.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut1_node - DUT1 node. Type: dictionary
 | | ... | - dut1_int_name - DUT1 node interface name. Type: string
@@ -39,17 +39,17 @@
 | | ... | - dut2_eid - Dut2 node eid address. Type: dictionary
 | | ... | - dut1_static_adjacency - Dut1 static adjacency. Type: dictionary
 | | ... | - dut2_static_adjacency - Dut2 static address. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Configure LISP topology in 3-node circular topology \
 | | ... | \| ${dut1_node} \| ${interface_name} \| None \
 | | ... | \| ${dut2_node} \| ${interface_name} \| None \
 | | ... | \| ${locator_set} \| ${dut1_eid} \| ${dut2_eid} \
 | | ... | \| ${dut1_static_adjacency} \| ${dut2_static_adjacency} \|
-| | ...
+| |
 | | [Arguments] | ${dut1_node} | ${dut1_int_name} | ${dut1_int_index}
 | | ... | ${dut2_node} | ${dut2_int_name} | ${dut2_int_index}
 | | ... | ${locator_set} | ${dut1_eid} | ${dut2_eid}
@@ -99,7 +99,7 @@
 
 | Change LISP Configuration
 | | [Documentation] | Change configuration of the Lisp protocol.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut1_node - DUT1 node. Type: dictionary
 | | ... | - dut2_node - DUT2 node. Type: dictionary
@@ -118,16 +118,16 @@
 | | ... | Type: dictionary
 | | ... | - new_dut1_static_adjacency - New DUT1 static adjacency.
 | | ... | Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Change LISP Configuration \| ${dut1_node} \| ${dut2_node} \
 | | ... | \| ${dut1_to_dut2} \| ${dut2_to_dut1} | "08:00:27:20:e0:0d" \
 | | ... | \| "08:00:27:b1:94:b1" \| "6.3.0.1" \| "6.3.0.20" \| "24" \
 | | ... | \| ${old_dut1_static_adjacency} \| ${new_dut1_static_adjacency} \|
-| | ...
+| |
 | | [Arguments] | ${dut1_node} | ${dut2_node} | ${dut1_to_dut2}
 | | ... | ${dut2_to_dut1} | ${dut1_to_dut2_mac} | ${dut2_to_dut1_mac}
 | | ... | ${new_dut1_ip} | ${new_dut2_ip} | ${prefix}
diff --git a/resources/libraries/robot/overlay/lispgpe.robot b/resources/libraries/robot/overlay/lispgpe.robot
index 5c611a56a9..1fa84da721 100644
--- a/resources/libraries/robot/overlay/lispgpe.robot
+++ b/resources/libraries/robot/overlay/lispgpe.robot
@@ -25,7 +25,7 @@
 *** Keywords ***
 | Configure LISP GPE topology in 3-node circular topology
 | | [Documentation] | Configure LISP GPE topology in 3-node circular topology.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut1_node - DUT1 node. Type: dictionary
 | | ... | - dut1_if - DUT1 node interface. Type: string
@@ -38,23 +38,23 @@
 | | ... | - dut2_eid - DUT2 node eid address. Type: dictionary
 | | ... | - dut1_static_adjacency - DUT1 static adjacency. Type: dictionary
 | | ... | - dut2_static_adjacency - DUT2 static adjacency. Type: dictionary
-| | ...
+| |
 | | ... | *Return:*
 | | ... | - No value returned
-| | ...
+| |
 | | ... | *Example:*
 | | ... | \| Configure LISP GPE topology in 3-node circular topology \| ${dut1_node} \| ${interface_name} \
 | | ... | \| None \| ${dut2_node} \| ${interface_name} \| None \
 | | ... | \| ${locator_set} \| ${dut1_eid} \| ${dut2_eid} \
 | | ... | \| ${dut1_static_adjacency} \| ${dut2_static_adjacency} \|
-| | ...
+| |
 | | [Arguments]
 | | ... | ${dut1_node} | ${dut1_if} | ${dut1_int_index}
 | | ... | ${dut2_node} | ${dut2_if} | ${dut2_int_index}
 | | ... | ${locator_set} | ${dut1_eid} | ${dut2_eid}
 | | ... | ${dut1_static_adjacency} | ${dut2_static_adjacency}
 | | ... | ${vni_table}=0 | ${vrf_table}=0
-| | ...
+| |
 # DUT1 settings:
 | | ${dut1_int_index}= | Run Keyword If | ${dut1_int_index} is None
 | | | ... | Get Interface Sw Index | ${dut1_node} | ${dut1_if}
@@ -89,7 +89,7 @@
 | | ... | ${dut1_static_adjacency['prefix']}
 | | ... | ${dut1_static_adjacency['seid']}
 | | ... | ${dut1_static_adjacency['prefix']}
-| | ...
+| |
 # DUT2 settings:
 | | ${dut2_int_index}= | Run Keyword If | ${dut2_int_index} is None
 | | | ... | Get Interface Sw Index | ${dut2_node} | ${dut2_if}
diff --git a/resources/libraries/robot/overlay/srv6.robot b/resources/libraries/robot/overlay/srv6.robot
index dafc0fe566..8ac0343f9a 100644
--- a/resources/libraries/robot/overlay/srv6.robot
+++ b/resources/libraries/robot/overlay/srv6.robot
@@ -19,7 +19,7 @@
 | Configure SR LocalSID on DUT
 | | [Documentation] | Create SRv6 LocalSID and binds it to a particular\
 | | ... | behavior on the given DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node where to create localSID on. Type: dictionary
 | | ... | - local_sid - LocalSID IPv6 address. Type: string
@@ -42,9 +42,9 @@
 | | ... | to SR-unaware appliance via static proxy). Type: string
 | | ... | - sid_list - SID list (Optional, default value: []; required for SRv6
 | | ... | endpoint to SR-unaware appliance via static proxy). Type: list
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Configure SR LocalSID on DUT \| ${nodes['DUT1']} \| B:: \| end \|
 | | ... | \| Configure SR LocalSID on DUT \| ${nodes['DUT1']} \| C:: \
 | | ... | \| end.dx2 \| interface=GigabitEthernet0/10/0 \|
@@ -58,12 +58,12 @@
 | | ... | \| Configure SR LocalSID on DUT \| ${nodes['DUT2']} \| E:: \
 | | ... | \| end.as \| next_hop=10.0.0.1 \| out_if=DUT2_VHOST1 \
 | | ... | \| in_if=DUT2_VHOST2 \| src_addr=B:: \| sid_list=['C::', 'D::'] \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${local_sid} | ${behavior}
 | | ... | ${interface}=${None} | ${next_hop}=${None} | ${fib_table}=${None}
 | | ... | ${out_if}=${None} | ${in_if}=${None} | ${src_addr}=${None}
 | | ... | @{sid_list}
-| | ...
+| |
 | | Configure SR LocalSID | ${dut_node} | ${local_sid} | ${behavior}
 | | ... | interface=${interface} | next_hop=${next_hop} | fib_table=${fib_table}
 | | ... | out_if=${out_if} | in_if=${in_if} | src_addr=${src_addr}
@@ -71,55 +71,55 @@
 
 | Show SR LocalSIDs on DUT
 | | [Documentation] | Show SRv6 LocalSIDs on the given DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node where to show SR localSIDs on. Type: dictionary
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Show SR LocalSIDs on DUT \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
-| | ...
+| |
 | | Show SR LocalSIDs | ${dut_node}
 
 | Configure SR Policy on DUT
 | | [Documentation] | Create SRv6 policy on the given DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node where to create SRv6 policy on. Type: dictionary
 | | ... | - bsid - BindingSID - local SID IPv6 address. Type: string
 | | ... | - mode - Encapsulation / insertion mode. Type: string
 | | ... | - sid_list - SID list. Type: list
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Configure SR Policy on DUT \| ${nodes['DUT2']} \| A:: \| encap \
 | | ... | \| B::\| C:: \|
 | | ... | \| Configure SR Policy on DUT \| ${nodes['DUT2']} \| D:: \| insert \
 | | ... | \| E::\| F:: \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${bsid} | ${mode} | @{sid_list}
-| | ...
+| |
 | | Configure SR Policy | ${dut_node} | ${bsid} | ${sid_list} | mode=${mode}
 
 | Show SR Policies on DUT
 | | [Documentation] | Show SRv6 policies on the given DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node where to show SR policies on. Type: dictionary
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Show SR Policies on DUT \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
-| | ...
+| |
 | | Show SR Policies | ${dut_node}
 
 | Configure SR Steer on DUT
 | | [Documentation] | Create SRv6 steering policy on the given DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node where to create SR steering policy on.
 | | ... | Type: dictionary
@@ -131,99 +131,102 @@
 | | ... | in case of L3 mode). Type: string
 | | ... | - prefix - IP address prefix (Optional, default value: None; required
 | | ... | for L3 mode). Type: integer
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Configure SR Steer on DUT \| ${nodes['DUT1']} \| L2 \| B:: \
 | | ... | \| interface=GigabitEthernet0/10/0 \|
 | | ... | \| Configure SR Steer on DUT \| ${nodes['DUT1']} \| L3 \| C:: \
 | | ... | \| ip_address=2001::1 \| prefix=64 \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${mode} | ${bsid}
 | | ... | ${interface}=${None} | ${ip_addr}=${None} | ${prefix}=${None}
-| | ...
+| |
 | | Configure SR Steer | ${dut_node} | ${mode} | ${bsid}
 | | ... | interface=${interface} | ip_addr=${ip_addr} | prefix=${prefix}
 
 | Show SR Steering Policies on DUT
 | | [Documentation] | Show SRv6 steering policies on the given DUT node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node where to show SR steering policies on.
 | | ... | Type: dictionary
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Show SR Steering Policies on DUT \| ${nodes['DUT1']} \|
-| | ...
+| |
 | | [Arguments] | ${dut_node}
-| | ...
+| |
 | | Show SR Steering Policies | ${dut_node}
 
 | Set SR Encaps Source Address on DUT
 | | [Documentation] | Set SRv6 encapsulation source address on the given DUT
 | | ... | node.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - dut_node - DUT node where to set SRv6 encapsulation source address
 | | ... | on. Type: dictionary
 | | ... | - ip6_addr - Local SID IPv6 address. Type: string
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Set SR Encaps Source Address on DUT \| ${nodes['DUT1']} \| B:: \|
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${ip6_addr}
-| | ...
+| |
 | | Set SR Encaps Source Address | ${dut_node} | ip6_addr=${ip6_addr}
 
 | Show SR Policies on all DUTs
 | | [Documentation] | Show SRv6 policies on all DUT nodes in topology.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - nodes - Topology. Type: dictionary
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Show SR Policies on all DUTs \| ${nodes} \|
-| | ...
+| |
 | | [Arguments] | ${nodes}
-| | ...
+| |
 | | ${duts}= | Get Matches | ${nodes} | DUT*
-| | :FOR | ${dut} | IN | @{duts}
+| | FOR | ${dut} | IN | @{duts}
 | | | Show SR Policies | ${nodes['${dut}']}
+| | END
 
 | Show SR Steering Policies on all DUTs
 | | [Documentation] | Show SRv6 steering policies on all DUT nodes in topology.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - nodes - Topology. Type: dictionary
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Show SR Steering Policies on all DUTs \| ${nodes} \|
-| | ...
+| |
 | | [Arguments] | ${nodes}
-| | ...
+| |
 | | ${duts}= | Get Matches | ${nodes} | DUT*
-| | :FOR | ${dut} | IN | @{duts}
+| | FOR | ${dut} | IN | @{duts}
 | | | Show SR Steering Policies | ${nodes['${dut}']}
+| | END
 
 | Show SR LocalSIDs on all DUTs
 | | [Documentation] | Show SRv6 LocalSIDs on all DUT nodes in topology.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - nodes - Topology. Type: dictionary
-| | ...
+| |
 | | ... | *Example:*
-| | ...
+| |
 | | ... | \| Show SR LocalSIDs on all DUTs \| ${nodes} \|
-| | ...
+| |
 | | [Arguments] | ${nodes}
-| | ...
+| |
 | | ${duts}= | Get Matches | ${nodes} | DUT*
-| | :FOR | ${dut} | IN | @{duts}
+| | FOR | ${dut} | IN | @{duts}
 | | | Show SR LocalSIDs | ${nodes['${dut}']}
+| | END
 
 | Initialize IPv6 forwarding over SRv6 with encapsulation with '${n}' x SID '${prepos}' decapsulation in 3-node circular topology
 | | [Documentation]
@@ -232,7 +235,7 @@
 | | ... | VPP interfaces. Setup IPv6 addresses on all interfaces. Set segment
 | | ... | routing for IPv6 for required number of SIDs and configure IPv6 routes
 | | ... | on both DUT nodes.
-| | ...
+| |
 | | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix}
 | | VPP Interface Set IP Address
@@ -242,12 +245,13 @@
 | | VPP Interface Set IP Address
 | | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix}
 | | Vpp All Ra Suppress Link Layer | ${nodes}
-| | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2
+| | FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2
 | | | ${hexa_nr}= | Convert To Hex | ${number}
 | | | VPP Add IP Neighbor | ${dut1}
 | | | ... | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} | ${tg_if1_mac}
 | | | VPP Add IP Neighbor | ${dut2}
 | | | ... | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} | ${tg_if2_mac}
+| | END
 | | VPP Add IP Neighbor
 | | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac}
 | | VPP Add IP Neighbor
@@ -314,11 +318,11 @@
 | | ... | interfaces. Setup IPv6 addresses on all interfaces. Set segment
 | | ... | routing for IPv6 with defined behaviour function and configure IPv6
 | | ... | routes on both DUT nodes.
-| | ...
+| |
 | | ... | *Note:*
 | | ... | KW uses test variable rxq_count_int set by KW Add worker threads
 | | ... | and rxqueues to all DUTs
-| | ...
+| |
 | | ${sock1}= | Set Variable | memif-DUT1_CNF
 | | ${sock2}= | Set Variable | memif-DUT2_CNF
 | | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1}
@@ -331,8 +335,9 @@
 | | ... | ${rxq_count_int}
 | | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if1}
 | | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if2}
-| | :FOR | ${dut} | IN | @{duts}
+| | FOR | ${dut} | IN | @{duts}
 | | | Show Memif | ${nodes['${dut}']}
+| | END
 | | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix}
 | | VPP Interface Set IP Address
diff --git a/resources/libraries/robot/overlay/vxlan.robot b/resources/libraries/robot/overlay/vxlan.robot
index f03abdc11a..f98514e2a2 100644
--- a/resources/libraries/robot/overlay/vxlan.robot
+++ b/resources/libraries/robot/overlay/vxlan.robot
@@ -13,19 +13,19 @@
 
 *** Settings ***
 | Library  | resources.libraries.python.InterfaceUtil
-| ...
+|
 | Documentation | VXLAN keywords.
 
 *** Keywords ***
 | Get VXLAN dump
 | | [Documentation] | Get VXLAN dump.
-| | ...
+| |
 | | ... | *Arguments:*
 | | ... | - node - DUT node data. Type: dictionary
 | | ... | - interface - Interface on the VPP node (Optional). Type: string
-| | ...
+| |
 | | [Arguments] | ${dut_node} | ${interface}=${None}
-| | ...
+| |
 | | [Return] | ${vxlan_dump}
-| | ...
+| |
 | | ${vxlan_dump}= | VXLAN Dump | ${dut_node} | ${interface}