aboutsummaryrefslogtreecommitdiffstats
path: root/resources/libraries/robot/performance/performance_configuration.robot
diff options
context:
space:
mode:
authorJan Gelety <jgelety@cisco.com>2017-12-19 09:15:14 +0100
committerPeter Mikus <pmikus@cisco.com>2018-01-17 16:00:52 +0000
commit8215cf7caa6f6fc1d78971f78a934499f3998a4c (patch)
tree2b3705c80191c9676f85dfb750d871e93f491812 /resources/libraries/robot/performance/performance_configuration.robot
parentf13401bd90a789e9a736dfdb7cbe80313f0304fd (diff)
CSIT-675: SRv6 performance tests
- update L1 KWs - update L2 KWs - tests with one SID (no SRH insertion) - tests with two SIDs (SRH inserted) and decapsulation - tests with two SIDs (SRH inserted) without decapsulation - enabled packet traces and logged packet traces in the test case tear down if test failed Change-Id: I3a0f4c350eed3f42509c6d49e832faa78fe64dbb Signed-off-by: Jan Gelety <jgelety@cisco.com> (cherry picked from commit 95998a67270ffd72f09ce6f3d43235c723edf36b)
Diffstat (limited to 'resources/libraries/robot/performance/performance_configuration.robot')
-rw-r--r--resources/libraries/robot/performance/performance_configuration.robot79
1 files changed, 78 insertions, 1 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot
index f6b1230e7b..52be3a26a8 100644
--- a/resources/libraries/robot/performance/performance_configuration.robot
+++ b/resources/libraries/robot/performance/performance_configuration.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
+# Copyright (c) 2018 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
@@ -33,6 +33,7 @@
| Resource | resources/libraries/robot/ip/ip6.robot
| Resource | resources/libraries/robot/vm/qemu.robot
| Resource | resources/libraries/robot/l2/tagging.robot
+| Resource | resources/libraries/robot/overlay/srv6.robot
| Documentation | Performance suite keywords - configuration.
*** Keywords ***
@@ -598,6 +599,82 @@
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip6 | ${table_idx}
+| Initialize IPv6 forwarding over SRv6 with encapsulation with '${n}' x SID '${prepos}' decapsulation in 3-node circular topology
+| | [Documentation]
+| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular
+| | ... | topology. Get the interface MAC addresses and setup neighbours on all
+| | ... | VPP interfaces. Setup IPv6 addresses on all interfaces. Set segment
+| | ... | routing for IPv6 for required number of SIDs and configure IPv6 routes
+| | ... | on both DUT nodes.
+| | ...
+| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
+| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix}
+| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix}
+| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix}
+| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix}
+| | Suppress ICMPv6 router advertisement message | ${nodes}
+| | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2
+| | | ${hexa_nr}= | Convert To Hex | ${number}
+| | | Add Ip Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr}
+| | | ... | ${tg1_if1_mac}
+| | | Add Ip Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr}
+| | | ... | ${tg1_if2_mac}
+| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac}
+| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac}
+| | ${sid1}= | Set Variable If
+| | ... | "${n}" == "1" | ${dut2_sid1}
+| | ... | "${n}" == "2" | ${dut2_sid1_1}
+| | ${sid2}= | Set Variable If
+| | ... | "${n}" == "1" | ${dut1_sid2}
+| | ... | "${n}" == "2" | ${dut1_sid2_1}
+| | Vpp Route Add | ${dut1} | ${sid1} | ${sid_prefix} | ${dut2_if1_ip6}
+| | ... | ${dut1_if2}
+| | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | ${dut1_if2_ip6}
+| | ... | ${dut2_if1}
+| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1}
+| | @{sid_list_dir0}= | Run Keyword If | "${n}" == "1"
+| | ... | Create List | ${dut2_sid1}
+| | ... | ELSE IF | "${n}" == "2"
+| | ... | Create List | ${dut2_sid1_1} | ${dut2_sid1_2}
+| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap
+| | ... | @{sid_list_dir0}
+| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid}
+| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix}
+| | Run Keyword If | "${n}" == "1"
+| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.dx6
+| | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2
+| | Run Keyword If | "${n}" == "2"
+| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1_1} | end
+| | Run Keyword If | "${n}" == "2" and "${prepos}" != "without"
+| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1_2} | end.dx6
+| | ... | interface=${dut2_if2} | next_hop=${tg_if2_ip6_subnet}2
+| | Run Keyword If | "${n}" == "2" and "${prepos}" == "without"
+| | ... | Vpp Route Add | ${dut2} | ${dut2_sid1_2} | ${sid_prefix}
+| | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2}
+| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2}
+| | @{sid_list_dir1}= | Run Keyword If | "${n}" == "1"
+| | ... | Create List | ${dut1_sid2}
+| | ... | ELSE IF | "${n}" == "2"
+| | ... | Create List | ${dut1_sid2_1} | ${dut1_sid2_2}
+| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap
+| | ... | @{sid_list_dir1}
+| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid}
+| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix}
+| | Run Keyword If | "${n}" == "1"
+| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.dx6
+| | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2
+| | Run Keyword If | "${n}" == "2"
+| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2_1} | end
+| | Run Keyword If | "${n}" == "2" and "${prepos}" != "without"
+| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2_2} | end.dx6
+| | ... | interface=${dut1_if1} | next_hop=${tg_if1_ip6_subnet}2
+| | Run Keyword If | "${n}" == "2" and "${prepos}" == "without"
+| | ... | Vpp Route Add | ${dut1} | ${dut1_sid2_2} | ${sid_prefix}
+| | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1}
+
| Initialize L2 xconnect in 3-node circular topology
| | [Documentation]
| | ... | Setup L2 xconnect topology by cross connecting two interfaces on