diff options
author | Jan Gelety <jgelety@cisco.com> | 2018-03-22 13:51:33 +0100 |
---|---|---|
committer | Tibor Frank <tifrank@cisco.com> | 2018-04-23 11:14:42 +0000 |
commit | 73a01b1a7fc836c964627eea2c08106df0da5aee (patch) | |
tree | db6fb92714f92a7f6c7ab95b89877ded0e36891c /resources/libraries/robot/performance | |
parent | cd330b5a1bf1a289e7dad68420679a5d94de1eda (diff) |
CSIT-1009: SRv6 proxy tests
- SRv6 with endpoint to SR-unaware Service Function via static proxy
- SRv6 with endpoint to SR-unaware Service Function via dynamic proxy
- SRv6 with endpoint to SR-unaware Service Function via masquerading proxy
Change-Id: I6a6062cb41d810bf9e27dacfd866181bfde4c693
Signed-off-by: Jan Gelety <jgelety@cisco.com>
Diffstat (limited to 'resources/libraries/robot/performance')
3 files changed, 127 insertions, 1 deletions
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 46e0e5bb6c..a864a023bf 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -635,6 +635,7 @@ | | ... | ${dut1_if2} | | Vpp Route Add | ${dut2} | ${sid2} | ${sid_prefix} | ${dut1_if2_ip6} | | ... | ${dut2_if1} +# Configure SRv6 for direction0 | | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} | | @{sid_list_dir0}= | Run Keyword If | "${n}" == "1" | | ... | Create List | ${dut2_sid1} @@ -655,6 +656,7 @@ | | Run Keyword If | "${n}" == "2" and "${prepos}" == "without" | | ... | Vpp Route Add | ${dut2} | ${dut2_sid1_2} | ${sid_prefix} | | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2} +# Configure SRv6 for direction1 | | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} | | @{sid_list_dir1}= | Run Keyword If | "${n}" == "1" | | ... | Create List | ${dut1_sid2} @@ -676,6 +678,109 @@ | | ... | Vpp Route Add | ${dut1} | ${dut1_sid2_2} | ${sid_prefix} | | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1} +| Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via '${behavior}' behaviour in 3-node circular topology +| | [Documentation] +| | ... | Create pair of Memif interfaces on all defined VPP nodes. Set UP +| | ... | state on VPP interfaces in path on nodes in 3-node circular topology. +| | ... | Get the interface MAC addresses and setup neighbours on all VPP +| | ... | interfaces. Setup IPv6 addresses on all interfaces. Set segment +| | ... | routing for IPv6 with defined behaviour function and configure IPv6 +| | ... | routes on both DUT nodes. +| | ... +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} +| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} +| | ${sock1}= | Set Variable | memif-DUT1_VNF +| | ${sock2}= | Set Variable | memif-DUT2_VNF +| | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1} +| | ... | ${1} | dut1-memif-1-if1 | dut1-memif-1-if2 | ${rxq} | ${rxq} +| | Set up memif interfaces on DUT node | ${dut2} | ${sock2} | ${sock2} +| | ... | ${1} | dut2-memif-1-if1 | dut2-memif-1-if2 | ${rxq} | ${rxq} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | Show Memif | ${nodes['${dut}']} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1_if2} | ${dut1_if2_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1-memif-1-if1} +| | ... | ${dut1-memif-1-if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut1} | ${dut1-memif-1-if2} +| | ... | ${dut1-memif-1-if2_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2-memif-1-if1} +| | ... | ${dut2-memif-1-if1_ip6} | ${prefix} +| | VPP Set If IPv6 Addr | ${dut2} | ${dut2-memif-1-if2} +| | ... | ${dut2-memif-1-if2_ip6} | ${prefix} +| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Add Ip Neighbor | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} +| | Add Ip Neighbor | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 +| | ... | ${tg1_if1_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 +| | ... | ${tg1_if2_mac} +| | ${dut1-memif-1-if2_mac}= | Get Interface MAC | ${dut1} | memif2 +| | ${dut2-memif-1-if2_mac}= | Get Interface MAC | ${dut2} | memif2 +| | Add Ip Neighbor | ${dut1} | ${dut1-memif-1-if1} | ${dut1_nh} +| | ... | ${dut1-memif-1-if2_mac} +| | Add Ip Neighbor | ${dut2} | ${dut2-memif-1-if1} | ${dut2_nh} +| | ... | ${dut2-memif-1-if2_mac} +| | Vpp Route Add | ${dut1} | ${dut2_sid1} | ${sid_prefix} | ${dut2_if1_ip6} +| | ... | ${dut1_if2} +| | Vpp Route Add | ${dut1} | ${out_sid2_1} | ${sid_prefix} +| | ... | ${tg_if1_ip6_subnet}2 | ${dut1_if1} +| | Vpp Route Add | ${dut2} | ${dut1_sid2} | ${sid_prefix} | ${dut1_if2_ip6} +| | ... | ${dut2_if1} +| | Vpp Route Add | ${dut2} | ${out_sid1_1} | ${sid_prefix} +| | ... | ${tg_if2_ip6_subnet}2 | ${dut2_if2} +# Configure SRv6 for direction0 on DUT1 +| | Set SR Encaps Source Address on DUT | ${dut1} | ${dut1_sid1} +| | @{sid_list_dir0}= | Create List | ${dut2_sid1} | ${out_sid1_1} +| | ... | ${out_sid1_2} +| | Configure SR Policy on DUT | ${dut1} | ${dut1_bsid} | encap +| | ... | @{sid_list_dir0} +| | Configure SR Steer on DUT | ${dut1} | L3 | ${dut1_bsid} +| | ... | ip_addr=${tg_if2_ip6_subnet} | prefix=${sid_prefix} +# Configure SRv6 for direction1 on DUT2 +| | Set SR Encaps Source Address on DUT | ${dut2} | ${dut2_sid2} +| | @{sid_list_dir1}= | Create List | ${dut1_sid2} | ${out_sid2_1} +| | ... | ${out_sid2_2} +| | Configure SR Policy on DUT | ${dut2} | ${dut2_bsid} | encap +| | ... | @{sid_list_dir1} +| | Configure SR Steer on DUT | ${dut2} | L3 | ${dut2_bsid} +| | ... | ip_addr=${tg_if1_ip6_subnet} | prefix=${sid_prefix} +# Configure SRv6 for direction0 on DUT2 +| | ${dut2_out_if}= | Get Interface Name | ${dut2} | memif1 +| | ${dut2_in_if}= | Get Interface Name | ${dut2} | memif2 +| | Remove Values From List | ${sid_list_dir0} | ${dut2_sid1} +| | Run Keyword If | "${behavior}" == "static_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.as +| | ... | ${None} | ${dut2_nh} | ${None} | ${dut2_out_if} | ${dut2_in_if} +| | ... | ${dut1_sid1} | @{sid_list_dir0} +| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.ad +| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} +| | ... | ELSE IF | "${behavior}" == "masquerading" +| | ... | Configure SR LocalSID on DUT | ${dut2} | ${dut2_sid1} | end.am +| | ... | next_hop=${dut2_nh} | out_if=${dut2_out_if} | in_if=${dut2_in_if} +| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} +# Configure SRv6 for direction1 on DUT1 +| | ${dut1_out_if}= | Get Interface Name | ${dut1} | memif1 +| | ${dut1_in_if}= | Get Interface Name | ${dut1} | memif2 +| | Remove Values From List | ${sid_list_dir1} | ${dut1_sid2} +| | Run Keyword If | "${behavior}" == "static_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.as +| | ... | ${None} | ${dut1_nh} | ${None} | ${dut1_out_if} | ${dut1_in_if} +| | ... | ${dut2_sid2} | @{sid_list_dir1} +| | ... | ELSE IF | "${behavior}" == "dynamic_proxy" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.ad +| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} +| | ... | ELSE IF | "${behavior}" == "masquerading" +| | ... | Configure SR LocalSID on DUT | ${dut1} | ${dut1_sid2} | end.am +| | ... | next_hop=${dut1_nh} | out_if=${dut1_out_if} | in_if=${dut1_in_if} +| | ... | ELSE | Fail | Unsupported behaviour: ${behavior} +| | All Vpp Interfaces Ready Wait | ${nodes} + | Initialize L2 xconnect in 3-node circular topology | | [Documentation] | | ... | Setup L2 xconnect topology by cross connecting two interfaces on diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot index e66a98b19c..8a17a6ab7b 100644 --- a/resources/libraries/robot/performance/performance_setup.robot +++ b/resources/libraries/robot/performance/performance_setup.robot @@ -407,6 +407,27 @@ | | Set Suite Variable | @{plugins_to_enable} | | Append To List | ${plugins_to_enable} | acl_plugin.so +| Set up performance test suite with Static SRv6 proxy +| | [Documentation] +| | ... | Append srv6as_plugin.so to the list of enabled plugins. +| | ... +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | srv6as_plugin.so + +| Set up performance test suite with Dynamic SRv6 proxy +| | [Documentation] +| | ... | Append srv6ad_plugin.so to the list of enabled plugins. +| | ... +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | srv6ad_plugin.so + +| Set up performance test suite with Masquerading SRv6 proxy +| | [Documentation] +| | ... | Append srv6am_plugin.so to the list of enabled plugins. +| | ... +| | Set Suite Variable | @{plugins_to_enable} +| | Append To List | ${plugins_to_enable} | srv6am_plugin.so + | Set up 3-node performance topology with wrk and DUT's NIC model | | [Documentation] | | ... | Suite preparation phase that setup default startup configuration of diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot index 036f06fd2b..4acaec9c33 100644 --- a/resources/libraries/robot/performance/performance_utils.robot +++ b/resources/libraries/robot/performance/performance_utils.robot @@ -572,7 +572,7 @@ | | ... | ${topology_type} | warmup_time=0 | | Run Keyword If | ${dut_stats}==${True} | Show statistics on all DUTs | ${nodes} | | Run Keyword If | ${dut_stats}==${True} and ${pkt_trace}==${True} -| | ... | Show Packet Trace On All Duts | ${nodes} +| | ... | Show Packet Trace On All Duts | ${nodes} | maximum=${100} | | Return From Keyword | ${results} | Clear and show runtime counters with running traffic |