Add: Dot1Q + L2BD + GBP

Change-Id: I0050f715011ecfa92b3ee88b301809a56abb7946
Signed-off-by: Peter Mikus <pmikus@cisco.com>

2 files changed, 101 insertions, 1 deletions

diff --git a/resources/libraries/robot/features/gbp.robot b/resources/libraries/robot/features/gbp.robot
new file mode 100644
index 0000000000..78f9251180
--- /dev/null
+++ b/resources/libraries/robot/features/gbp.robot
@@ -0,0 +1,99 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.GBP
+| ...
+| Documentation | GBP keywords
+
+*** Keywords ***
+| Initialize GBP routing domains on node
+| | [Documentation]
+| | ... | Initialize GBP routing domains on node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - dut - DUT node. Type: string
+| | ... | - count - Number of baseline interface variables. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize GBP routing domains on node \| DUT1 \| 1 \|
+| | ...
+| | [Arguments] | ${dut} | ${count}=${1}
+| | ...
+| | ${dut_str}= | Convert To Lowercase | ${dut}
+| | :FOR | ${id} | IN RANGE | 1 | ${count} + 1
+| | | ${hexa_id}= | Convert To Hex | ${id} | length=2 | lowercase=yes
+| | | ${dut_lo}= | VPP Create Loopback | ${nodes['${dut}']}
+| | | ... | mac=ba:dc:00:ff:ee:${hexa_id}
+| | | Set Interface State
+| | | ... | ${nodes['${dut}']} | ${dut_lo} | up
+| | | Add Fib Table
+| | | ... | ${nodes['${dut}']} | ${id}
+| | | GBP Route Domain Add
+| | | ... | ${nodes['${dut}']} | rd_id=${id}
+| | | Assign Interface To Fib Table
+| | | ... | ${nodes['${dut}']} | ${dut_lo} | ${id}
+| | | Create L2 BD
+| | | ... | ${nodes['${dut}']} | ${id} | arp_term=${1}
+| | | GBP Bridge Domain Add
+| | | ... | ${nodes['${dut}']} | ${dut_lo} | bd_id=${id}
+| | | GBP Endpoint Group Add
+| | | ... | ${nodes['${dut}']} | ${100} | bd_id=${id} | rd_id=${id}
+| | | Configure IP addresses on interfaces
+| | | ... | ${nodes['${dut}']} | ${dut_lo} | 1.1.1.1 | 24
+| | | GBP Subnet Add Del
+| | | ... | ${nodes['${dut}']} | 1.1.1.0 | 24 | ${100} | rd_id=${id}
+| | | GBP Ext Itf Add Del
+| | | ... | ${nodes['${dut}']} | ${dut_lo} | bd_id=${id} | rd_id=${id}
+| | | GBP Endpoint Add
+| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_1} | 1.1.1.100
+| | | ... | ${tg_if1_mac} | ${100}
+| | | GBP Endpoint Add
+| | | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${id}_2} | 1.1.1.200
+| | | ... | ${tg_if2_mac} | ${100}
+| | | VPP Route Add
+| | | ... | ${nodes['${dut}']} | 10.10.10.0 | 24 | gateway=1.1.1.100
+| | | ... | interface=${dut_lo} | vrf=${1}
+| | | VPP Route Add
+| | | ... | ${nodes['${dut}']} | 20.20.20.0 | 24 | gateway=1.1.1.200
+| | | ... | interface=${dut_lo} | vrf=${1}
+| | | GBP Subnet Add Del
+| | | ... | ${nodes['${dut}']} | 10.10.10.0 | 24 | ${200} | rd_id=${id}
+| | | GBP Subnet Add Del
+| | | ... | ${nodes['${dut}']} | 20.20.20.0 | 24 | ${300} | rd_id=${id}
+| | | Add Replace Acl Multi Entries
+| | | ... | ${nodes['${dut}']}
+| | | ... | rules="ipv4 permit src 0.0.0.0/0 dst 0.0.0.0/0 proto 61"
+| | | ... | tag="gbp-permit-200-300"
+| | | GBP Contract Add Del
+| | | ... | ${nodes['${dut}']} | ${200} | ${300} | acl_index=${0}
+| | | GBP Contract Add Del
+| | | ... | ${nodes['${dut}']} | ${300} | ${200} | acl_index=${0}
+
+| Initialize GBP routing domains
+| | [Documentation]
+| | ... | Initialize GBP routing domains on all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - count - Number of GBP routing domains. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Initialize GBP routing domains \| 1 \|
+| | ...
+| | [Arguments] | ${count}=${1}
+| | ...
+| | :FOR | ${dut} | IN | @{duts}
+| | | Initialize GBP routing domains on node | ${dut} | count=${count}
+| | Set interfaces in path up
diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot
index 9c8ad458cf..f29a26e59a 100644
--- a/resources/libraries/robot/shared/default.robot
+++ b/resources/libraries/robot/shared/default.robot
@@ -37,11 +37,12 @@
 | Library | resources.libraries.python.VPPUtil
 | ...
 | Resource | resources/libraries/robot/crypto/ipsec.robot
+| Resource | resources/libraries/robot/features/gbp.robot
+| Resource | resources/libraries/robot/features/policer.robot
 | Resource | resources/libraries/robot/performance/performance_configuration.robot
 | Resource | resources/libraries/robot/performance/performance_limits.robot
 | Resource | resources/libraries/robot/performance/performance_utils.robot
 | Resource | resources/libraries/robot/shared/container.robot
-| Resource | resources/libraries/robot/features/policer.robot
 | Resource | resources/libraries/robot/shared/suite_teardown.robot
 | Resource | resources/libraries/robot/shared/suite_setup.robot
 | Resource | resources/libraries/robot/shared/test_teardown.robot