Add iACL IPv4/IPv6 tests.

 - IPv4: CSIT-15
 - IPv6: CSIT-16

Change-Id: I6e66aa853dfaebf1388f1191dbb63f5216820325
Signed-off-by: Patrik Hrnciar <phrnciar@cisco.com>

2 files changed, 125 insertions, 1 deletions

diff --git a/resources/libraries/robot/iacl.robot b/resources/libraries/robot/iacl.robot
new file mode 100644
index 0000000000..659edb8c30
--- /dev/null
+++ b/resources/libraries/robot/iacl.robot
@@ -0,0 +1,125 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Documentation | Keywords for iACL tests
+| Resource | resources/libraries/robot/default.robot
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.NodePath
+
+*** Keywords ***
+| Node path computed for 3-node topology
+| | [Arguments] | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
+| | [Documentation] | *Create interface variables for 3-node topology.*
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${tg_node} - Node attached to the path. Type: dictionary
+| | ... | - ${dut1_node} - Node attached to the path. Type: dictionary
+| | ... | - ${dut2_node} - Node attached to the path. Type: dictionary
+| | ...
+| | ... | _Set testcase variables for nodes and interfaces._
+| | ... | - ${tg_node} - Variable for node in path. Type: dictionary
+| | ... | - ${dut1_node} - Variable for node in path. Type: dictionary
+| | ... | - ${dut2_node} - Variable for node in path. Type: dictionary
+| | ... | - ${tg_if1} - First interface of TG node. Type: str
+| | ... | - ${tg_if2} - Second interface of TG node. Type: str
+| | ... | - ${dut1_if1} - First interface of first DUT node. Type: str
+| | ... | - ${dut1_if2} - Second interface of first DUT node. Type: str
+| | ... | - ${dut2_if1} - First interface of second DUT node. Type: str
+| | ... | - ${dut2_if2} - Second interface of second DUT node. Type: str
+| | ... | - ${tg_if1_mac} - MAC address of TG interface (1st).
+| | ... | - ${tg_if2_mac} - MAC address of TG interface (2nd).
+| | ... | - ${dut1_if1_mac} - MAC address of DUT1 interface (1st).
+| | ... | - ${dut1_if2_mac} - MAC address of DUT1 interface (2nd).
+| | ...
+| | Append Nodes | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
+| | Compute Path
+| | ${tg_if1} | ${tg_node}= | Next Interface
+| | ${dut1_if1} | ${dut1_node}= | Next Interface
+| | ${dut1_if2} | ${dut1_node}= | Next Interface
+| | ${dut2_if1} | ${dut2_node}= | Next Interface
+| | ${dut2_if2} | ${dut2_node}= | Next Interface
+| | ${tg_if2} | ${tg_node}= | Next Interface
+| | ${tg_if1_mac}= | Get interface mac | ${tg_node} | ${tg_if1}
+| | ${tg_if2_mac}= | Get interface mac | ${tg_node} | ${tg_if2}
+| | ${dut1_if1_mac}= | Get interface mac | ${dut1_node} | ${dut1_if1}
+| | ${dut1_if2_mac}= | Get interface mac | ${dut1_node} | ${dut1_if2}
+| | Set Test Variable | ${tg_node}
+| | Set Test Variable | ${tg_if1}
+| | Set Test Variable | ${tg_if2}
+| | Set Test Variable | ${dut1_node}
+| | Set Test Variable | ${dut1_if1}
+| | Set Test Variable | ${dut1_if2}
+| | Set Test Variable | ${dut2_node}
+| | Set Test Variable | ${dut2_if1}
+| | Set Test Variable | ${dut2_if2}
+| | Set Test Variable | ${tg_if1_mac}
+| | Set Test Variable | ${tg_if2_mac}
+| | Set Test Variable | ${dut1_if1_mac}
+| | Set Test Variable | ${dut1_if2_mac}
+
+| Interfaces in path are up
+| | [Documentation] | *Set UP state on interfaces in path on nodes.*
+| | ...
+| | Set Interface State | ${tg_node} | ${tg_if1} | up
+| | Set Interface State | ${tg_node} | ${tg_if2} | up
+| | Set Interface State | ${dut1_node} | ${dut1_if1} | up
+| | Set Interface State | ${dut1_node} | ${dut1_if2} | up
+| | Set Interface State | ${dut2_node} | ${dut2_if1} | up
+| | Set Interface State | ${dut2_node} | ${dut2_if2} | up
+| | Vpp Node Interfaces Ready Wait | ${dut1_node}
+| | Vpp Node Interfaces Ready Wait | ${dut2_node}
+
+| IPv4 Addresses set on the node interfaces
+| | [Arguments] | ${dut_node} | ${int1} | ${ip_addr1} | ${int2} | ${ip_addr2}
+| | ...         | ${prefix_length}
+| | [Documentation] | Setup IPv4 adresses on the node interfaces
+| | ...
+| | ... | *Arguments*
+| | ... | - ${dut_node} - VPP node.
+| | ... | - ${int1} - First node interface.
+| | ... | - ${ip_addr1} - First IP address.
+| | ... | - ${int2} - Second node interface.
+| | ... | - ${ip_addr2} - Second IP address.
+| | ... | - ${prefix_length} - IP prefix length.
+| | ...
+| | ... | *Example*
+| | ... | \| IPv4 Addresses set on the node interfaces \
+| | ... | \| ${dut1_node} \| ${dut1_if1} \| ${dut1_if1_ip} \
+| | ... | \| ${dut1_if2} \| ${dut1_if2_ip} \| ${prefix_length} \|
+| | ...
+| | Set Interface Address | ${dut_node} | ${int1} | ${ip_addr1}
+| | ...                   | ${prefix_length}
+| | Set Interface Address | ${dut_node} | ${int2} | ${ip_addr2}
+| | ...                   | ${prefix_length}
+
+| IPv6 Addresses set on the node interfaces
+| | [Arguments] | ${dut_node} | ${int1} | ${ip_addr1} | ${int2} | ${ip_addr2}
+| | ...         | ${prefix_length}
+| | [Documentation] | Setup IPv6 adresses on the node interfaces
+| | ...
+| | ... | *Arguments*
+| | ... | - ${dut_node} - VPP node.
+| | ... | - ${int1} - First node interface.
+| | ... | - ${ip_addr1} - First IP address.
+| | ... | - ${int2} - Second node interface.
+| | ... | - ${ip_addr2} - Second IP address.
+| | ... | - ${prefix_length} - IP prefix length.
+| | ...
+| | ... | *Example*
+| | ... | \| IPv6 Addresses set on the node interfaces \
+| | ... | \| ${dut1_node} \| ${dut1_if1} \| ${dut1_if1_ip} \
+| | ... | \| ${dut1_if2} \| ${dut1_if2_ip} \| ${prefix_length} \|
+| | ...
+| | Vpp Set If Ipv6 Addr | ${dut_node} | ${int1} | ${ip_addr1} | ${prefix_length}
+| | Vpp Set If Ipv6 Addr | ${dut_node} | ${int2} | ${ip_addr2} | ${prefix_length}
diff --git a/resources/libraries/robot/traffic.robot b/resources/libraries/robot/traffic.robot
index b97a6d4360..fc1fa363fe 100644
--- a/resources/libraries/robot/traffic.robot
+++ b/resources/libraries/robot/traffic.robot
@@ -105,4 +105,3 @@
 | | Run Keyword And Expect Error | ICMP echo Rx timeout |
 | | ... | Run Traffic Script On Node | send_icmp_check_headers.py
 | | ... | ${tg_node} | ${args}
-l
\ No newline at end of file