Add the DPDK l2fwd performance test cases.

Change-Id: I996847a4871ed994cd9b5edb459fb079ff39c86d
Signed-off-by: Fangyin Hu <fangyinx.hu@intel.com>

2 files changed, 146 insertions, 9 deletions

diff --git a/resources/libraries/robot/DPDK/default.robot b/resources/libraries/robot/DPDK/default.robot
new file mode 100644
index 0000000000..bf01aec429
--- /dev/null
+++ b/resources/libraries/robot/DPDK/default.robot
@@ -0,0 +1,58 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Variables | resources/libraries/python/topology.py
+| Library | resources.libraries.python.topology.Topology
+| Library | resources.libraries.python.CpuUtils
+| Library | resources.libraries.python.DUTSetup
+| Library | resources.libraries.python.TGSetup
+| Library | resources.libraries.python.DPDK.L2fwdTest
+| Library | Collections
+
+*** Keywords ***
+| Start L2FWD '${m}' worker threads and rxqueues '${n}' with jumbo frames '${b}'
+| | [Documentation] |  Start the l2fwd with M worker threads without HTT
+| | ...             |  and rxqueues N and B(yes or no) jumbo frames in all DUTs
+| | ${nb-cores}= | Catenate | ${m}
+| | ${cpu}= | Run Keyword If | '${m}' == '1' | Catenate | 0x3
+| | ...     | ELSE IF        | '${m}' == '2' | Catenate | 0x403
+| | ...     | ELSE IF        | '${m}' == '4' | Catenate | 0xc07
+| | ...     | ELSE IF        | '${m}' == '6' | Catenate | 0x1c0f
+| | ...     | ELSE IF        | '${m}' == '8' | Catenate | 0x3c1f
+| | ...     | ELSE           | Fail | Not supported combination
+| | ${rxqueues}= | Catenate | ${n}
+| | ${jumbo_frames}= | Catenate | ${b}
+| | Start l2fwd to all DUTs | ${cpu} | ${nb-cores}
+| | ...     | ${rxqueues} | ${jumbo_frames}
+
+| Start l2fwd to all DUTs
+| | [Documentation] | Setup worker threads and rxqueues in l2fwd startup
+| | ...             | configuration to all DUTs
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${cpu} - CPU configuration. Type: string
+| | ... | - ${nb-cores} - cores for the packet forwarding. Type: string
+| | ... | - ${rxqueues} - rxqueues configuration. Type: string
+| | ... | - ${jumbo_frames} - Enable the jumbo frames or not. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Start l2fwd to all DUTs \| 0x403 \| 2 \
+| | ... | \| 1 \| no
+| | [Arguments] | ${cpu} | ${nb-cores} | ${rxqueues} | ${jumbo_frames}
+| | ${duts}= | Get Matches | ${nodes} | DUT*
+| | :FOR | ${dut} | IN | @{duts}
+| | | Start the l2fwd test | ${nodes['${dut}']}
+| | | ...            | ${cpu} | ${nb-cores} | ${rxqueues} | ${jumbo_frames}
+
diff --git a/resources/libraries/robot/performance.robot b/resources/libraries/robot/performance.robot
index a42a889cd1..ebacc30e64 100644
--- a/resources/libraries/robot/performance.robot
+++ b/resources/libraries/robot/performance.robot
@@ -167,7 +167,7 @@
 | | Append Node | ${nodes['TG']}
 | | Append Node | ${nodes['DUT1']} | filter_list=${iface_model_list}
 | | Append Node | ${nodes['TG']}
-| | Compute Path
+| | Compute Path | always_same_link=${FALSE}
 | | ${tg_if1} | ${tg}= | Next Interface
 | | ${dut1_if1} | ${dut1}= | Next Interface
 | | ${dut1_if2} | ${dut1}= | Next Interface
@@ -1139,10 +1139,11 @@
 | | ... | \| Measure latency \| 10 \| 4.0 \| 64 \| 3-node-IPv4
 | | [Arguments] | ${duration} | ${rate} | ${framesize} | ${topology_type}
 | | Return From Keyword If | ${rate} <= 10000 | ${-1}
-| | Clear all counters on all DUTs
+| | ${ret}= | For DPDK Performance Test
+| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs
 | | Send traffic on tg | ${duration} | ${rate}pps | ${framesize}
 | | ...                | ${topology_type} | warmup_time=0
-| | Show statistics on all DUTs
+| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs
 | | Run keyword and return | Get latency
 
 | Traffic should pass with no loss
@@ -1164,10 +1165,11 @@
 | | ...         | ${fail_on_loss}=${True}
 | | Clear and show runtime counters with running traffic | ${duration}
 | | ...  | ${rate} | ${framesize} | ${topology_type}
-| | Clear all counters on all DUTs
+| | ${ret}= | For DPDK Performance Test
+| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs
 | | Send traffic on tg | ${duration} | ${rate} | ${framesize}
 | | ...                | ${topology_type} | warmup_time=0
-| | Show statistics on all DUTs
+| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs
 | | Run Keyword If | ${fail_on_loss} | No traffic loss occurred
 
 | Traffic should pass with partial loss
@@ -1192,10 +1194,11 @@
 | | ...         | ${fail_on_loss}=${True}
 | | Clear and show runtime counters with running traffic | ${duration}
 | | ...  | ${rate} | ${framesize} | ${topology_type}
-| | Clear all counters on all DUTs
+| | ${ret}= | For DPDK Performance Test
+| | Run Keyword If | ${ret}==${FALSE} | Clear all counters on all DUTs
 | | Send traffic on tg | ${duration} | ${rate} | ${framesize}
 | | ...                | ${topology_type} | warmup_time=0
-| | Show statistics on all DUTs
+| | Run Keyword If | ${ret}==${FALSE} | Show statistics on all DUTs
 | | Run Keyword If | ${fail_on_loss} | Partial traffic loss accepted
 | | ...            | ${loss_acceptance} | ${loss_acceptance_type}
 
@@ -1219,9 +1222,10 @@
 | | Send traffic on tg | -1 | ${rate} | ${framesize}
 | | ...                | ${topology_type} | warmup_time=0 | async_call=${True}
 | | ...                | latency=${False}
-| | Clear runtime counters on all DUTs
+| | ${ret}= | For DPDK Performance Test
+| | Run Keyword If | ${ret}==${FALSE} | Clear runtime counters on all DUTs
 | | Sleep | ${duration}
-| | Show runtime counters on all DUTs
+| | Run Keyword If | ${ret}==${FALSE} | Show runtime counters on all DUTs
 | | Stop traffic on tg
 
 | Add PCI devices to DUTs from 3-node single link topology
@@ -1571,3 +1575,78 @@
 | | dut1_v4.set_arp | ${dut1_if2} | ${dut2_dut1_ip4_address} | ${dut2_if1_mac}
 | | dut2_v4.set_arp | ${dut2_if1} | ${dut1_dut2_ip4_address} | ${dut1_if2_mac}
 
+DPDK 2-node Performance Suite Setup with DUT's NIC model
+| | [Documentation]
+| | ... | Updates interfaces on all nodes and setup global
+| | ... | variables used in test cases based on interface model provided as an
+| | ... | argument. Initializes traffic generator. Initializes DPDK test
+| | ... | environment.
+| | ...
+| | ... | *Arguments:*
+| | ... | - topology_type - Topology type. Type: string
+| | ... | - nic_model - Interface model. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| DPDK 2-node Performance Suite Setup with DUT's NIC model \
+| | ... | \| L2 \| Intel-X520-DA2 \|
+| | [Arguments] | ${topology_type} | ${nic_model}
+| | Setup performance global Variables
+| | 2-node circular Topology Variables Setup with DUT interface model
+| | ... | ${nic_model}
+| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
+| | ...                          | ${dut1} | ${dut1_if1}
+| | ...                          | ${dut1} | ${dut1_if2}
+| | ...                          | ${topology_type}
+| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
+
+DPDK 3-node Performance Suite Setup with DUT's NIC model
+| | [Documentation]
+| | ... | Updates interfaces on all nodes and setup global
+| | ... | variables used in test cases based on interface model provided as an
+| | ... | argument. Initializes traffic generator. Initializes DPDK test
+| | ... | environment.
+| | ...
+| | ... | *Arguments:*
+| | ... | - topology_type - Topology type. Type: string
+| | ... | - nic_model - Interface model. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| 3-node Performance Suite Setup \| L2 \| Intel-X520-DA2 \|
+| | [Arguments] | ${topology_type} | ${nic_model}
+| | Setup performance global Variables
+| | 3-node circular Topology Variables Setup with DUT interface model
+| | ... | ${nic_model}
+| | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
+| | ...                          | ${dut1} | ${dut1_if1}
+| | ...                          | ${dut2} | ${dut2_if2}
+| | ...                          | ${topology_type}
+| | Initialize DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
+| | Initialize DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2}
+
+DPDK 3-node Performance Suite Teardown
+| | [Documentation]
+| | ... | Suite teardown phase with traffic generator teardown.
+| | ... | Cleanup DPDK test environment.
+| | ...
+| | Teardown traffic generator | ${tg}
+| | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
+| | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2}
+
+DPDK 2-node Performance Suite Teardown
+| | [Documentation]
+| | ... | Suite teardown phase with traffic generator teardown.
+| | ... | Cleanup DPDK test environment.
+| | ...
+| | Teardown traffic generator | ${tg}
+| | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2}
+
+For DPDK Performance Test
+| | [Documentation]
+| | ... | Return TRUE if variable DPDK_TEST exist, otherwise FALSE.
+| | ${ret} | ${tmp}=  | Run Keyword And Ignore Error
+| | ... | Variable Should Exist | ${DPDK_TEST}
+| | Return From Keyword If | "${ret}" == "PASS" | ${TRUE}
+| | Return From Keyword | ${FALSE}
+